Once more my automatic update of Vista stopped working today.

Similar Questions

• Automatic update of Vista enough work

  Automatic update Vista stop working, I can not even updates to download manually on the site to update, because the update of the window hangs.  I've been across the different boards, groups etc. looking for an answer.  Here's the problem:

  When the problem was detected:

  I was performing a Windows Update on July 28, 2009, the update process appears to hang when - at this time there, I finished the process via Task Manager (which says that the Windows Update did not) - since that this led to the problem with the update of Windows process still suspended.

  The system configuration:

  (1) HP Pavilion dv7 laptop
  (2) Intel Core 2 DUO P7350 CPU @ 2 GHz
  (3) 64-bit operating system running Service Pack 2 (4 GB Ram)
  (4) Vista Home Premium

  Behavior (I start the Windows Update process - the following happens each time):

  * The Windows Update process launches a blank page of IE with a crumb of bread from "Control Panel > Windows Update.
  * The wheel keeps spinning and over time, I'll "end task the" via Task Manager which translates into the following:
  -A dialog box opens saying "program does not.
  -When I FINISH the task another dialogue box opens saying "Windows Explorer is not responding" However windows Explorer will be finally complete and restart itself.

  Here are 3 of many Solutions of attempts:

  (1) msconfig to disable services Start Up items & disable (has not fixed the problem)
  (2) new installation Usr & run Windows Update (did not fix the problem)
  3) CMD - net stop wuauclt & bits (what was interesting because the system could not find wuauclt but he found pieces)

  I hope you can help as I am running out of ideas.

  See you soon,.

  Pinawa (Richard)

  Hello
   
  Thanks for posting on Microsoft Answers.
   
  Looks like there is a problem with the componetns of Windows Update.
   
  Try to perform the SFC scan
  1. click on the Start button
  2. on the Start Menu, click all programs followed by accessories
  3. in the menu accessories, right-click on command line option
  4. in the drop-down menu that appears, click the "Run as Administrator" option
  5. If you have the enabled User Account Control (UAC) you will be asked for leave before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
  6. in the command prompt window, type: sfc/scannow then press enter
  7. a message is displayed to indicate that "the analysis of the system will start.
  8. be patient because the analysis may take some time
  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
  11 after the scan finished, close the command prompt window reboot the computer and check.
  Also you can try to run the system tool for Windows Vista update: http://support.microsoft.com/kb/947821
  It will be useful.
   
  Kind regards

  Niranjan
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "automatic update service has stopped working" when you try to install the software

  I'm trying to install Canon Imagebrowser provided with my camera.  Close program ends the installation process but cannot complete.  I then get an error box saying Microsoft serivce Auto Update has stopped working and the installation does not complete. Have tried several times and have the same problem.  This has happened with the software Imagebrowser - other software on the CD installed fine.

  OK... I thought about it.  Go to the link below and follow the instructions to manually install Imagebrowser.  It worked for me!

  http://USA.Canon.com/Cusa/consumer/standard_display/utility_browser
  Good luck...

• After the automatic update, its has stopped working

  After auto update, my sound no longer works and I checked Device Manager and it is to show that everything works perfectly, even I tried to update the audio player and it rose far also I tried FIX IT shows that there is no problem.
  can someone help me in this situation.

  So have you checked the HP forum?

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/HP-Pavilion-dv6000-sound-problem/TD-p/2342/page/3

• Adobe Contribute and Photoshop Elements 8 interrupt work with some automatic updates of Vista.

  With some Vista updates automatic Adobe Contribute and Photoshop 8 stop working until the moment where the programs must be uninstalled and reinstalled to operate again. After an automatic update, these two programs can be open to all, and an error message appears indicating that they must be reinstalled. Both programs are residing on a separate hard drive than the Vista operating system. This problem doesn't happen with every automatic update of Vista.

  Please repost your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads , where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum. Don't forget to include the numbers of KB updates at the source of the problem.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My automatic updates Windows Vista do not work? Error: Windows can't check for updates

  original title: My automatic Windows Vista updates do not work?

  My automatic updates Windows Vista do not work? There is no error code, it just says "Windows can't check for updates.

  I tried to use the fix from microsoft, it would join in the other responses, but it did not work.

  And have you tried resolution: method 2 in http://support.microsoft.com/kb/946414?

• My computer installs the automatic updates for Vista Home Premium, but fails to set them up.

  original title: Microsoft updates

  My computer installs the automatic updates for Vista Home Premium, but fails to set them up. I'll through in circles, trying to figure out what the problem is. Everything was fine until a week ago. Help please

  Thanks for trying to help. It was too complicated for me to fix, so to get help in. happy to say now, all right.

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• patch of active update module has stopped working

  Keep is mocrosoft message this patch of active update module has stopped working. Microsoft said it can be fixed by searching online, but the message keeps returning.

  Hi Westsiddavy,

  A. you are able to install updates?

  B. you get an error with the message code?

  C. recent changes made on your computer?

  Try the following steps.

  Step 1: online antivirus scan

  Perform an online virus scan to check if your computer is infected.

  www.Safety.live.com

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Step 2: safe mode

  Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly, or that might prevent Windows from starting correctly. If a problem does not reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 3: reset windows update components

  Try this step if you found the error during the installation of updates. Open the link and click the fix button.

  http://support.Microsoft.com/kb/971058

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Adobe lightroom problem: tried to install this program, run it, and he said automatically adobe lightroom has stopped working

  I tried to install this program, run it and it indicates automatically adobe lightroom has stopped working and I have to close the program. I tried to uninstall and reinstall the program and the same error occurs.

  Thus, it seems that the graphics cards drivers must be updated.

  I suggest you to visit the site of graphics card manufacturer and update the drivers for the graphics card.

• Get the error as a broker for Vista stopped working when trying to start the Webex session

  Original title: broker for vista stopped working

  Anyone know what this means?  I get this message every time I try to open a Webex session.   I work under Vista

  Hello

  The question you posted would be better suited in the Cisco Forums. I would recommend posting your query in the Cisco Forum site:

  https://supportforums.Cisco.com/index.jspa

• Updates Windows has stopped working for months in a row

  For the fourth month in a row updates windows has stopped working. When I use windows update troubleshooting get error 0 x 80070005(2016-07-13-T-02_20_41P).

  Tried to use windows update reset. I get the message, could not reset windows update due to the failure to stop bits service.

  Laptop HP 365

  Windows 7 Home premium

  I hope not. Unlike the last days of patch, KB3161608 is not an inescapable problem in preinstalling. It is a real solution. :)

• Notifier updates AAM has stopped working

  Every morning, I get a notice "AAM updates notifier has stopped working." my OS (Windows 7 64-bit).  I can't find solutions to this problem or even no evidence that someone else has this problem.  This is very weird.  I remember trying to run updates on my CS6 at some point and that he cannot somehow, but I've been very busy and not really pay attention.  I guess I thought: "I'll do it later."  But now I have this every morning instead...  When I search AAM Notifier.exe updates I can't find it on my machine anywhere.  AdobeUpdater also does not seem to exist on my machine.  I certainly didn't uninstall it myself, but I'd get how an error "stop working" on something that does not exist to run in the first place?  In any case, I would like to be able to run again the updates on my CS6 and stop to get this message every morning...

  I posted this in the comments to the Forum because I can't find a relevant forum after that in.  Someone suggests that I have try one product forums even if this issue is really on the notifier updates MAA and not photoshop specifically.
  

  Have Avittone you tried to remove and reinstall the Creative Suite 6?  I'd be concerned only to reinstall Adobe Application Manager as there could be other damage to your installation.

  We invite you to attempt to reinstall Adobe Application Manager to see if it solves your problems.  You can download a new copy of Windows https://www.adobe.com/support/downloads/detail.jsp?ftpID=4773.

  If you continue to experience difficulties however I recommend a standard uninstaller and reinstalling the software as your next step.

• My Illustrator stopped working today, Manager AA wont´t start.

  My Illustrator stopped working today, Manager AA wont´t start. I tried to download first, and after having extracted the file, I got this error: "could not find the procedure start address initializecriticalsectionEx in module Kernel32.dll DLLfile '... (translated from Swedish) I also tried to uninstall the Manager of the AA, but he can´t is among other programs that CAN be uninstalled. What should do?

  Hi, no I was not looking for that, because he had only older versions... anyway now it works. But I still have another problem: very often when I open eps files, I get the message "the file are made in most recent version and can´t be opened." ?? How is that possible? I mean if I have a cloud solution, it should be the latest version of right?

• How to stop or delay the system restart after automatic updates in Vista? This is the case most of the weeks and I lose what I'm working on at the time

  The Windows Vista system upgrades

  Configure automatic updates to one setting other than "auto". See to change the automatic update of the settings here: http://www.microsoft.com/windows/downloads/windowsupdate/learn/windowsvista.mspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft