One or more devices do not support multi-equipment tasks.
Hello
I work with 2 X USB series Renault (6356 USB). I am acquiring data analog voltage of all 8 channels on the two Renault (total up to 16 analog inputs). I need data acquisition to synchronize and trigger from an external digital source (a signal that I currently wired in A PFI0 of Dev). I use a sampling frequency of 800 kHz and a 400 kS buffer size.
I tried to use an express vi for two devices; two separate express vis for each device; and recently changed to DAQmx icons (as seen in the attachment). Anyway, I get an error (error-201426: one or more devices do not support multi-equipment tasks.). He referred then DevA and DevB as devices that do not support tasks. I was under the impression that tasks multi-equipment agree with property X of the series. I use NI-DAQmx 9.5.5.
In the attached photo, I left most while loop. The part of the diagram that I left out is just for viewing and recording of data, I've included parts, I felt it necessary to describe my problem.
I would appreciate all the advice really.
Thank you
Leslie
I think crossrulz is right. No worries, as they must be in separate tasks, your data is always synchronized as you want. You'll just have to do some things in the software, because not all the data will be returned in the same Bay of waveforms. What you can do is to create two tasks (one for each device), build an array of tasks, and when you do a reading, do it inside a loop for. concatenate the waveforms of each reading and you have a table of waveforms with all your data as if you read it in a single task. You also need to configure your second task to trigger the DevB/PFI0 and divide your trigger wire, he PFI0 wiring on each device.
Tags: NI Software
Similar Questions
-
"Video playback device does not support protected content playback.
It is a system with tuner via SiliconDust HD Homerun first. QuickTV works very well.The temporary fix was noted by optimizing and reducing the WMC window temporarily fixed direct reception of TV tuner. You are looking for a permanent solution.More in detail about this problem with DRM can be found here:http://www.Silicondust.com/forum2/viewtopic.php?f=41&t=13923&p=85683#p85683and here:http://www.thegreenbutton.TV/forums/viewtopic.php?f=5&t=3760&p=36116&Hilit=the+video+playback+device+does+not+support+playback+of+protected#p36116
Have tried all of the above tactics. Still not play a "Update Ready" on step 14.Any ideas what I'm missing here. Windows 8-64 bit Pro with the Add on WMC.Also, I must say that I am very disappointed that MS has taken to "Stay on top" setting to keep WMC above other windows version Win8 out.What could be the reason for this? Forces to some third-party utilities user / app.1. the error message was in my topic:"Video playback device does not support protected content playback.2. the excruciatingly detailed troubleshooting steps are listed in the links that I showed in my post.In any case, after trying a bunch of stuff and you try to reset the DRM / play ready through my above links, I made the point #1 as shown in the instructions below:http://support.Microsoft.com/kb/976590For some reason, this protected download digital file and update of WMC to play this sound file now seems to have fixed the problems that I had the problem of "video playback device does not support protected content playback.Really a frustrating thing.I had some problems with the installation of a driver from chipset for a new motherboard, I had to install and it seemed pretty hardware changes to have upset the loan play in my Win8 - 64-bit Pro installation.In any case, looks OK now. -
one or more files were not imported because he had problems reading of their
How to import a video to Flash Professional CC 2014? It's already a .flv file but I still get the "one or more files were not imported because he had problems reading of their" pop up
@
Flash Professional CC 2014 support FLV videos but make sure you import your videos into Flash AS3 or AIR doc-types only. WebGL and Canvas of HTML5 doctypes do not support videos and therefore import video option is disabled in these types of doc.
-
Portege R500 - error message "sound device is not supported" THotkey
Hello
Whenever I have start up my Portege R500 I get THotkey message error "sound device is not supported. \
The same error message repeats when I touch the volume icon. There is also no sound.Any idea what causes this? I have tried to uninstall and reinstall the driver most that can affect the shortcut key and the sound.
Thank you
Nico
Is it Vista or XP?
Have you installed Windows yourself or it was preinstalled?
Maybe the wrong driver was installed (of another model for example).
-
Hi all!
I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.
Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.
I also downloaded example c# measure DC Voltsto compare with my request.
Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized. The device is not supported with this driver or version. " class constructor is called.
DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);
I guess it is function of device PXI!
I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.
NOR-DAQmx 8.9.5
NOR-DMM 3.0.1
NI-VISA 4.6.1
NOR-MAX 4.6.2f1
Roberto
Hello Robson,
Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:
KB 33A96PCW: receive error-1074118656 when running OR DMM screws
Let me know if this might help.
Best regards.
-
This message started on my installation of windows 7 media center with the installation of tuner Cable Digital ati a few months. I had the computer in my office with no monitor for a while and watched TV through my xbox on my samsung ln52b610. so I decided to connect to the PC directly to the tv and now get this message saying 'error display driver - video playback device does not support playback of protected content'. the strange thing is that if I go full screen, then new Media Center, here again, it seems to go away (most of the time). my video card is a 8500gt nvidia with hdmi output and I tried the latest driver from them and still no worky.
Take a look at the support links that can help solve your problem.
If no go, Greenbutton forum would be place to post the question: http://thegreenbutton.com/forums/
-
My Sony DSC - S85 will not connect to windows 7. He said no driver is available I can't believe what is happening simply because do upgrades of windows I yo buy all new appliances and video equipment.
You're right - the site of Sony says that your camera is not supported under Windows 32 or 64-Bit 7. However there is a simple solution - take the memory stick in and out of the camera and a card reader allows you to transfer your photos to your PC.
If your PC does not have a card reader, you can buy USB very cheap ones. Just make sure it's one that can read the memory stick into your camera.
-
Video clips will play is more - video format not supported
Please help. I recently transferred an iPhone 4s to an iphone 5. All images and videos were transferred in the shop. I came now to actually play the video and I get this message. "unsupported video format" Please can anyone help. Here are videos of precious I know I should have saved but I did not.
Hello riley-riley,.
Thanks for this info and choosing the communities Support from Apple. I know how important to get these videos work again is to you! As I understand it, you can't play videos on your 5 new iPhone that you had on your old iPhone 4S since the transfer of your personal data to your new phone. I have some suggestions to solve this problem and get those videos works again!
1. first of all, please, import videos from your iPhone 5 to a computer and try to play on the computer. After importation, do not delete or remove it from your iPhone, just to be sure. I also recommend making a backup at this stage, as well.
Import photos and videos from your iPhone, iPad or iPod touch
The backup of your iPhone, iPad and iPod touch2. If the videos play on your computer after you import, then you can try this copy of the video from the computer to your iPhone using iTunes synchronization. Once you sync videos to iPhone, trying to play two copies of the same video and see if they work.
Keep your photos safely stored and updated on all your devices
See you soon!
-
Original title: error servicesI can't on my firewalland I can't even accessHelp, please
Hi Rahulrahulpz,
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest you perform the clean boot and check if the problem persists.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: try the SFC (System File Checker) scan on the computer.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
I hope this helps.
-
One or more agents is not in a switchable State, cannot switch to datasource
ATG 10.2 BCC
I get an error in my Production environment where it shows prepare failed, after anlayzing I see that the data sources are different for agents when I try to change it I get this error, any help would be appreciated
You must restart the agents who has this error. More for example, the server did not start properly or got in some errors.
Peace
Shaik
-
Como descarga plugins porque uno o varios plugins not estan available for currently in el sistema por eso como soluciona para estar available in French.
So an image editor.
Gracias
Launch of Photoshop with the SHIFT key and select Yes to skip loading additional plugins and check if you get the same error.
-
"device does not support this file type.
That is the message from wmp when I try to sync the audio books from the library (wma dmr 10) to my Sansa Clip 2 GB.
Firmware is lie. I'm able to play wmp files. What should do?
--
BR annettew
I solved the problem :-) I just changed it mtp mode via SETTINGS > SYSTEM SETTINGS > USB MODE on the clip.
Now, I love my clip.
-
Qosmio F60 - display environment does not support protected playback
Qosmio F60
When I tried to watch a disc blue ray through a plasma phillips TV 50PF9960/69, the television and the computer displayed the following message "your environment display does not support protected reading content". Phillips responded that the TV is HDCP. I can watch a DVD on the TV through the same optical drive. Y at - it the problem with reading discs Blue ray on a Qosmio F60 in the TV?
The blue ray disc displayed on the computer without any problem when it is disconnected from the TV.
Do any one help please?
Hello
I read in some forums on this error message.
For the most part this message if one of the devices does not support HDCP.
It seems somehow the HDCP key has been lost between 2 devices (monitor and laptop).On the other hand, the CD/DVD drive can be assigned to another region of the country.
If you want to play DVDs created for other regions, then this error code could appear generally too. -
"Often, localstorage devices do not support VPD page
0x83
and can therefore be used for Raw Device Mappings (RDMS)." The content of the page0x83
is used as a unique identifier for the device. For more information, see creating Raw Device Mapping (RDM) is not supported for local storage (1017530). »Does anyone know if this is even the case for modern storage?
We are a dell shop, wishing to take advantage of the ability to create up to 64 TB RDM.
However, the storage of the host in question will be local SAS only.
Prefer not to have to merge muliple 2 TB VMDK into windows to make a record of 4.5 to.
Then projected on the presentation 1 x 4.5 CT rdm
If you plan to use a SAS controller, you should be able to do this. Your drive will be identified as a device of the naa, and you will be able to add as an RDM to VM - only with ESXi 5 (which can support more than 2 TB LUN).
-
Device "USB" only is not supported after conversion
* _Running vSphere + ESXi4 (paid and free) _ *.
I have a XP system that has operated for some time, with 2 USB Dongles for software installed on VMWare Server authentication.
Recently I found USB Net ShareStation IOGear solution for sharing USB devices over a local network, so I tried and managed to convert the virtual machine to free ESXi and successfully used the USB devices. Perfect!
However, I want to save this virtual machine using Veeam Backup, I need it in my firm paid ESXi so I converted again using the stand-alone converter, but I get the following message if poster every time I try to start it:
Ons power failure
vCenter could not find a suitable host to power on the virtual machine for the reasons listed below
& lt; VM & gt; & lt; NAME of HOST & gt; Device 'USB' is not supported. It is a virtual hardware version general limitation of the virtual machine on the selected host.
If I change settings and delete or one of the USBs listed as not supported, I get again theerror:
"USB" device is not supported
and she does not.
I only am not familiar with editing ini files so would appreciate pointers that would allow me to remove USB devices manually if this is what it takes so it wil boot.
Thank you.
You are welcome
If you think that my answer was helpful, please give points.
Maybe you are looking for
-
Toshiba 32AV834G - channel disordered
Hello I have a LCD 32AV834G TV. Search all channels and keep channel list.I use the TV on weekends. Occasionally, usually once a month, without touching the remote control all channels are messy.I do not understand why the TV do it. Clearly an error
-
Help, please
-
Laptop HP Pavilion: charger Details
My charger and charger of my friends were mixed and now we do not know how to find who owns what.Please help I t.
-
Download install sotware for portable printer all-in-one HP Officejet d135 on internet?
I have HP with Win XP computer. I just got a used HP Officejet d135 all-in-one printer without the cd to install the software. I can download the software of the printer off of the internet? If so, please send instructions step by step
-
Unable to connect Blackberry AppWorld on BlackBerry Smartphones
I can connect my legacy but to the 2nd floor when my PIN code and I submit error message so I cannot go further... How to solve it, please,