Online monitoring of services of

Similar Questions

• Event M18x R2 Win 8.1 Pro x 64 0, monitor SIMG Service error

  I finally decided to full wipe and a clean installation of Windows Pro 8.1 x 64. All the seeds well but every time you start (cold start or reboot), I get an error in the Windows Event Viewer '0, monitor SIMG Service error event' with the information of ' CurrentVersion = 6.3 ".»

  I have re-uploaded and re-installed the driver of high definition wireless are several times but no change.

  I never got the error under Win 8 and I'm on the victory Dell provided 8.1 x 64 driver.

  Any suggestions as to how to fix this error?

  Should I still have this driver/software?

  Problem solved.  I uninstalled the driver are thd.  My M18xR2 is not a WiDI installed card driver so do not necessary

• Foglight monitoring Windows services

  the majority of our servers are running on VM, vFoglight is very convenient on the system and monitoring of resources. But if I have to watch the top and to the bottom of the application processes, without having to install any agent. Any suggestions?

  Yes, you need an agent for each host that you want to monitor the services, but these agents can run remotely, which means that you can have multiple agents on a single host FglAM WindowsHost.

  Concerning

• U2414H, Dell Store of affiliation of the India, received faulty monitor, bad service

  I bought a Dell Ultrasharp U2414H monitor online at CompuIndia.com (membership Store Dell India) I got this article on June 22, 2015

  Since the day I got it, I faced too many problems with it. The goal of buying the new monitor was to connect to my Acer laptop (Aspire E1 - 572), which has VGA & HDMI ports to connect to the external monitor. As the monitor got only screen & HDMI input ports, and they did not provide the HDMI cables with the monitor, I had to buy an HDMI cable to operate the first day. I used it as a multi monitor and the strange problem appeared to start. The monitor went blank and entered into normal state in 2-3 seconds to little frequent delays several times (5 to 10 times) in an hour. I checked all the connection cable and detached from any other connection other than the supply cable and HDMI cable and it was again the same scenario. I have re-installed OS in my system and updated all the drivers only to see that the problem was still there. I thought it would be due to a fault in the HDMI cable I bought at a local store. So, I kept the monitor next door and ordered online a new HDMI cable I received 25 June 2015. I replaced my old HDMI cable with the newly purchased. The monitor was still showing the same problem but rarely happened until this afternoon when I noticed the monitor started to flicker and display went blank back and come very quickly. I turned off my laptop and remove all cables other than cable power monitor and re-tested and could see that the same thing is happening again. I plugged in the screen on the plugs different to confirm if it was something to do with the problem of power supply but not this case. I recorded the photos and video of this strange behavior, using my mobile device and the zip file containing the same was sent to customer service CompuIndia explaining the problems the same day. As I don't have a response from them I contacted them today (June 26). The representative of CompuIndia told me to contact Dell support. Contact Dell technical support was really painful but they do too many phone numbers listed on their Web site. I was suspended several times and has been disconnected. After trying for 2-3 hours in the morning, finally I could explain my problem to a person name Sunil. After checking online on all the problems and try all possible solutions, my monitor was always showing the same complaint. So he told me that they have a Tech person visit my place and replace my monitor with a refurbished. I wasn't ready to accept the monitor renovated as a replacement because it showed the problem since day 1, I received and it was given barely 4 days and so I have the right to replace it with a new one. So he advised me to contact CompuIndia to obtain a replacement with a new monitor. II contacted a person in CompuIndia and explained everything who assured me that he would contact me soon. That I did not get any call or email on their part I contacted them several times but they told each time to get back to me, but I never contacted by them. I contacted them in the evening again, and said they will respond to my email in 2 minutes. Now the person (did not provide his name) to the CompuIndia said that they received no response and the technical team that once he could send me an email. Now, this can't be the case. I am really frustrated re: DELL service provides. I feel that I should not have bought Dell monitor. I lost a lot of my time and money. Please indicate where I have to contact to get replacement.

  In the USA, we cannot replace this monitor. You must re - contact Dell India supported command. Read this for instructions.

• I've had this player/monitor/Internet Service for 2 & 1/2 months now and today ' today / this morning I put on and on my screen it says: "this copy of windows is not genuine" for windows 7 Professional!

  Why, all of a sudden; This morning - after using this computer at home (monitor; Keyboard, reader and Internet Explorer) - have this statement on my monitor - (lower right corner) - this copy of Windows '7 Professional' is not authentic.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Charge of monitoring database service.

  Hello

  I'm working on a cluster of CARS of 7 knots (11.2.0.3 on RHEL 6.4 x86_64) who has a services 50 + registered what companies use different applications to connect to the database.

  Can someone suggest a method to establish which of these services are the most frequent and most generate load on their respective authorities?

  I would like to be able to distribute services between available instances so that the busiest services do not come into conflict with each other on an instance.

  Is it possible to readily identified what are the first services of number of connections and the workload performed?

  Thanks in advance,

  In Enterprise Manager, I select the database of interest and then go on the Performance page. The second table contains a tab named Services. If you click on it, you can see the load broken down by service name.

  You can get a count of sessions by a query similar to the following:

  Select service_name, inst_id, count (*) as num_connections

  GV $ session

  Service_name group, select INST_ID

  order by service_name, INST_ID select;

  See you soon,.
  Brian

• Insect caught in the monitor u2414Hb and support is a disaster. No service tag

  First of all the question I seek to solve. A small insect, probably a fly has managed to make its way into my monitor in any way. It became lodged between the Panel and an outer layer or in the Panel and quickly dies. And has been stuck in place for more than a month. Attempts to dislodge without disassembling the monitor failed.

  Now, AFAIK disassemble the monitor to clear it will void the warranty and risk of damage to the screen so I prefer to avoid. I decided to contact the Department of support or guarantee dell to see if we could do something on this end.

  The monitor was purchased new from NewEgg.com on 01/01/15, with an indicated 3 years manufacturer's warranty. So, it should always be in the manufacturers warranty period.

  Although none where Dells website, or via their telephone system you can contact the technical support or departments without a number of warranty service. My monitor does not have a serial number, and Dells own materials state clearly that stand-alone monitors sold prior to 2016 (like this one, in 2015, has bought manufactured 2014) do not always have a service key.

  I tried every number on my monitor and its box, both online and telephone assistance. A number search as a service on the Web site key (but not with the telephone assistance) and appears as a system of office since 1997.

  Telephone service has been terrible. Repeatedly asking a service key, even when I explained that I don't have not one. Repeatedly ask me about Dell computer system I bought it, despite my clear statement that my problem was equipped with a screen of stand-alone and that I was not the owner of a dell computer system. Repeatedly asking me a Dell order number, despite my stating clearly it was not purchased from Dell, but bought new from newegg.com. Repeatedly telling me to contact the seller (newegg) to some how get help as a guarantee of the manufacturer. They told me a serial number was unnecessary because millions of people had bought monitors with this serial number. As if this makes no sense at all. I was told that a product model could be used to find what product I was calling about. I was told no numbers appearing on my device, or on its original packaging (that I kept) could be found in any system. I was transferred to several operators in several services all followed the same scenario and giving the same spiel on the * service tag. Before an operator involved, I've been dishonest and has asked for my phone number. All this despite the pages of Dell support stating clearly that some of their products do not have a key support.

  It does not appear to be process at all to deal with Dell products manufactured and sold without this little number that supposedly so critical. Dell apparently cannot do anything with the model # and # series uses all manufacturers in the world.

  . Exactly how to make contact with the service the customer without a service key.

  And can do something about the dead bug that introduced itself in the center of my screen as a brown spot little? Or am I stuck risking the destruction of my monitor with a canceled warranty? It doesn't make sense that a bug should be frankly worm its way between the layers of the screen.

  Monitors without a number of service purchased from resellers (Amazon, Best Buy, Buy.com, cost Co, Wal-Mart, Sams, other boutique online, eBay, etc.)
  * Based on the start date of monitor 20 digit PPID number code, Dell will guarantee the monitor for 3 years for most monitors. There are exceptions (S2340M, S2340L, etc.) who had only 1 year warranty.
  * You must contact the Support of your country (1-866-618-2044 USA) by telephone. Tell them to open only one internal Dell Oracle knowledge Information Centre
  * In the search space, they should enter PNP13081, and then click search. This opens the article,
  "Replacement for the monitor Dell and procedure policy - political international Dell. They should read scenario 7

  Scenario 7 =.
  Discussion: The customer is unable to provide a Dell order number or monitor the Service tag number. The only information that the client has are the PPID 20 serial numbers for the monitor.
  Warranty: date 3 years from manufacturing monitor integrated in the PPID number 20 digits
  Replacement procedure: Implement the replacement of screen against the dummy tag

  * You would provide the following representative data if you need a replacement monitor in this 3-year period:
  Brick or shop online address and a copy of Bill of sale:
  Monitor model:
  Monitor 20 digits alphanumeric serial number PPID:
  [Your]
  E-mail address:
  Name:
  Shipping address:
  Phone number:
  Operating system:
  Video card:
  Video card ports tested:
  Question:
  Performed troubleshooting:
  Monitor the done Factory Reset
  Watch chess self-test Diagnostics and integrated
  * Post more troubleshooting

• monitoring of Web service

  Hello
  I was wondering how to monitor web service calls.
  I have an external peoplecode via AE to a web service request synchronization.
  
  the application is fine and resume the intervention required. but I do not see these messages online under the heading monitoring synchronous services.
  
  is there a way to connect to web service call here.
  
  Thank you
  Subhash

  Hi Philippe,.
  Yes. There is a way to connect all your sync messages. If you have NOT yet done so, go to your service operations and go to the tab 3rd on the top which is the Routing tab. On the tab, you will find your defined routing. Click on it and try to locate the logging section. Select the loggin type you need. Hope it helps any.

  Best regards
  Lherault

  Published by: 953362 on April 16, 2013 21:21

• for months, I can't connect to Capital One online account services

  When I try to connect to Online Capital One services to the United Kingdom, I have a note "we're sorry, the online account Services is currently unavailable." I called Capital One and told me: now the problem simply use Internet Explorer. But I prefer Firefox. What I can do.

  I guess that you have looked at their site:
  http://www.capitalone.com/about/browser-support/
  ESP empty your max.

• Foglight 5.6.4 services monitoring

  Hi all

  We are sure that agents of the infrastructure can also monitor Windows services.

  But we can create rules for the monitoring of these properties Service.

  Monitoring service	FTP
  Monitoring service	Cron
  Monitoring service	DB
  Monitoring service	Web server
  Monitoring service	Send a Mail

  We want to know if we can check the status of the above services. Please guide us how to create rules for the latter.

  Thanks & best regards,

  Guenoun

  Hi Brian,.

  Sorry for the late reply. We actually got the created rule by selecting the type of toplology "Host Process" for linux and Aix hosts.  in this, we have chosen State 1 or 0. will check how it works and get back to you in the event of doubts.

  Kind regards

  Guenoun

• ACS - monitor Services

  Hello

  Currently using Windows ACS 4.0 and 1113 Ver4.2 with SNMP patch to allow ping.

  We want control services using Solarwinds APM, you fix the template above, you can see details of SNMP from the ect server and Services.  But it seems to require a user name and password to monitor services, which is not a Windows user name and password.  I tried to add Administrators user name and the password of the ACS, but does not control the services.

  Is there a certain procedure to monitor the Services of the CSA with a 3rd party like Solarwinds product?

  Concerning

  Craig

  The ACS SE 1113 is a server, locked in order to describe how the services are done with a third-party utility, it would very probably install some type of agent to look/monitor/or even send traps SNMP for the ACS Services (that are installed on the operating system).

  ACS already does in itself, if you go to the System Configuration > ACS Service Management > you could configure ACS to contact you in the event of a service failure. You may also send the report of these alerts to a Syslog server: System Configuration > Logging > change the case report.

  Just realized that there is also an SNMP Agent (System Configuration-> Configuration of the device--> SNMP Agent), this could provide some additional information:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/SCBasic.html#wp288047

  Keep in mind:

  Documentation of the ACS CSCsj18497 device doesn't not list SNMP MIB support

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj27225

  Hope this helps,

• vm Monitor and alert services

  is there a way to monitor windows services specific vm and alert based on down?

  Currently, it is not possible.

• Then VMware monitor a windows service?

  Hello

  Then VMware monitor a windows service? If so, what measures can be taken if the service is stopped? do we have additional vmware product need or license?

  Thank you.

  You must rely on third-party tools for monitoring windows services.

• Does anyone know of a Bonus print online printing service that will accept psd files in raw format?

  Does anyone know of an online photo printing service as Bonus print this accepps psd files in raw format?

  Thanks a lot for your kind reply.

• How to get serial number in Dell monitor?

  Hello

  How to get serial number in Dell Monitor (model No.: S2240Lc).

  I have only 20-digit S/n.

  Thank you

  Riou...

  As I said, you can't get a service tag. By the article.

  Monitors without a number of service purchased from resellers (Amazon, Best Buy, Buy.com, cost Co, Wal-Mart, Sams, other boutique online, etc.)
  * Based on the start date of date code monitor 20-digit serial number, Dell PPID you monitor for 3 years warranty
  You need to contact Support for your country. Tell them to open the Dell internal only Oracle knowledge Information center
  * In the search space, they should enter PNP13081, and then click search. This opens the article =
  Replacement for Dell monitor and procedure - Dell international policy policy

  The customer is unable to provide a Dell order number or serial number system because the customer bought the monitor from a retailer. The only information that the client has are the PPID number for the monitor. For monitors when there is not an available Dell order number, agents will use the date code embedded in the PPID monitor serial number to determine the beginning of the start of coverage.

  Discussion = the warranty is 3 years from the date of early series PPID embarked on the label.
  Solution = Set up screen replacement against the fake tag.
  * You would provide the following representative data if you need a replacement monitor in this 3-year period:
  Brick or shop online:
  Monitor model:
  Monitor 20 digits alphanumeric serial number PPID:
  [Your]
  E-mail address:
  Name:
  Shipping address:
  Phone number:
  Operating system:
  Video card:
  Video card ports tested:
  Question:
  Performed troubleshooting:
  Monitor the done Factory Reset
  Watch chess self-test Diagnostics and integrated
  * Post more troubleshooting