Only 1 VI can work at the same time?

Similar Questions

• 2 while loops can work at the same time?

  I have two while loops in my program; We can read the data and the other does nothing until I hit stop on the first. I want the first and the second to run out of the time constraint, I have for it when I hit the Start button to always run. I use a DAQ and transfer data from one to another while loop. See the attached file.

  Main issues:

  How to tie the Start button?

  How to get the second loop to work with the first?

  Thank you

  Your problem is that the loops are dependent on the data.  If you want to run two loops at the same time, they cannot have wires linking one to the other.  Focus on the architecture of producer/consumer .  It uses queues to send data of a loop to the other.

• How many PCs can I install cc illustrator and work at the same time?

  Can the 2 PCs, tolerated by the members, at the same time?

  You can install the software on two computers. These two computers can be Windows, Mac OS, or everyone. If you install on a third computer, you will be asked to turn off this feature on the other two computers. You can then re-enable one of the two previous computers and use Cloud Creative apps on it. You can not work at the same time.

  Kind regards

  Hervé Khare

• function work at the same time that the work can also do procedure...

  pls tel me major diff b/w cursor implicit vs explicit cursor and function procedure vs.
  
  Published by: 955345 on August 27, 2012 22:11
  
  Published by: Rousseau on August 28, 2012 11:08

  Rousseau wrote:
  k k bt

  What does that mean?

  function to do some work at the same time that work also can make procedure... Why work

  Function has the ability to be used in SQL, but cannot be a procedure.

  Basically, I use the procedure for transactional operation and function for Non-transactional operation. For example, if I have to update a table I would use a procedure to wrap my update statement. And if I have to do some calculations or run some select and return a result of Ref Cursor I would use a function.

  In addition to the technical restrictions of function and procedure its more the choices make us.

• Is it possible that several people can work on the same folio

  Is it possible that several people can work on the same folio?

  I usually work with a friend on my folios. We have been working directly for a dropbox folder, and together have created us a user with the same name on our macs. This gives the same path to the file, so we can never be reprinted when we work together for this user account. Works very well.

• How to put in place two sound devices and make two of them work at the same time?

  I am on Windows 7 Ultimate and I have a problem...

  I downloaded the SRS Audio Essentials software that improves the sound quality

  And I have Realtek audio device which is an audio driver that come with bulit in sound card

  But the problem is that I can choose only one of them as the default audio device

  When I was with Windows Xp, two of them worked at the same time...

  He is the captain:

  http://www.Flickr.com/photos/96392754@N07/8812378555/

  Help, please!

  PS: Sorry for my bad English... ^_^

  Hello

  Unfortunately this does happen, as it is by design,

  Here, a single device can be marked as default device, follow these steps below for more information.

  a. Click Start, type Sound in the box to start the search.
  b. click sound in the results of search at the top of the start menu.
  c. click the reading notice the check mark next to the default device.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Keboard and Touchpad 355 G2: Does not work at the same time

  Hello

  I am trying to configure my laptop for games, but I can't get my touchpad and keyboard work at the same time. I tried to disable palmcheck but that did not work. Anything else I could do?

  Thank you

  Hello

  Normally, you just have to disable SmartSense or PalmCheck Control Panel of Synaptics - but from what I've seen, it seems no longer works for Windows 10 versions of this driver.

  You too, can be able to work around this problem as follows.

  First, download the Synaptics driver on the link below and save it in your downloads folder.

  Version of the Synaptics 17.0.18.8 driver

  Disable your wireless card (should be f12 ).

  Open Control Panel, open programs and features, right click on the Synaptics driver and select uninstall.

  When finished, restart the laptop.

  When windows rebooted, open your download folder and re-run the installer of Synaptics - when it is finished, restart the laptop.

  Open the Synaptics settings panel, disable SmartSense or PalmCheck , then check if the touchpad works now with a key on the keyboard is pressed.

  If so, turn on your wireless card and use the utility on the following link to prevent Windows 10 to update automatically the Synaptics driver.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

  Note: If it does not, your existing driver are here.

• If I click on "PIN to the browser" the sensitive axis is unselected and vice versa. I need object "PIN at the top of the browser" and 'sensitive pine' work at the same time. Any suggestions?

  In the latest version of muse to adobe, I have me against "PIN at the top of the browser" and 'sensitive pine' work at the same time.

  Now if I choose an object and the axis 'browser', "sensitive pine" is unselected and vice versa.

  The need is for the header with the logo and menu bar to be pinned to the top of the browser, so that the page scrolls in the header bar.

  Now when I click on the sensitive left axis for the logo and the sensitive right pin for the navigation bar, the "pin at the top of the browser" gets deselected.

  Any suggestions or workarounds will be appreciated.

  Kind regards

  Vijay

  Hi all

  Thanks for that bring to our attention. We will consider adding this feature in the future.

  RyanDoyle - it's an interesting hack you have found! Unfortunately, I wouldn't count on that it works like this in the future, as a bug which is to operate. If you drag the screen to change the width of the browser as a Muse, you'll see that the behavior of the elements in the status button (a menu, for example) is different from when exported. However, if you make a small change to your hack, so it should always work: set button "width sensitive" State instead. In addition, I don't see why all parts must be in separate to this job state buttons, but I've only tried a simple example myself.

  An another workaround I used is to create another, more breakpoint. For example, if I have a menu that is pinned to the top left of the browser in the dots stop, then in a breakpoint, I would pin in the center top of the browser. Normally, I wouldn't add more breakpoints, but there is a way that I found to work around the problem. Ryan workaround is perhaps the best way to go if you take my advice and use a status button sensitive width instead of the width of the browser.

  Hope this helps,

  Anna

• How user by VM (XP) can connect at the same time?

  Hello guys,.

  We test VMware View 4 and so far work fine, but I have a question? How many user by VM can connect at the same time? I test with 2 VM (XP) in the pool, but I want to use more than 2 users, but when I try to login doesn't say "no resources available", what that means is that a single user by VM? Us who is running Terminal Server and try to find alternatives.

  Thank you

  It's the same as with a XP machine. 1 single user can connect at the same time.

  André

• How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Firstly - I work in InDesign CC 2015.

  My problem is, I had this 10 page document, which, on every page, shows an object that must be in PDF format - but do not print. I made this object into a button and unchecked "Printable". On top of this object, I made 10 hyperlinks (separate layer) that point to the page 1-10.

  When you export the document and I use the interactive PDF format , works ' show nonprinting object but do not print ' well, BUT hyperlinks don't. If I uncheck the "layer of nonprinting objects" in the file PDF, then hyperlinks work, but the problem now is that the nonprinting objects are invisible...

  When you export the document and I use a PDF to print the "unprintable object show but do not print" does not work BUT the hyperlinks don't...

  I put hyperlinks to post a link to pages and also tried the link to the anchor text. No difference.

  So my question is: How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Thank you

  Mette from Denmark

  I swapped my links to the buttons - AND NOW IT WORKS; (o)

• I want to teach my students the adobe Illustrator. If I buy CC-Illustrator, we work at the same time with every devices with my ID?

  I want to teach my students the adobe Illustrator. If I buy CC-Illustrator, we work at the same time with every devices with my ID?

  No, you have your own identification number

• I can't get two cards USB worked at the same time

  I use Labivew 8.6 to program an application using NI UBB-9211 and USB-6211 connection to two USB ports on my PC in order to measure the temperature and pressure (voltage) at the same time. Also, I need to generate two AOs of USB-6211 to drive my engines. I tested two cards, they are OK. But when I program them together, I get only 9211 worked, an error poped to acquisition of data USB-6211. Could you please help me on this? advice or examples of VI / would be greatly appreciated. Thank you in advance!

  Hi navistar.

  It seems that you should be able to do what you are trying to accomplish. Can you post some information about the error you receive? You use the lower level Assistant DAQ or DAQmx screws in your application? You can post a screenshot of your code where it is merged together and easier troubleshooting. You use any trigger of your application? We have examples in the example Finder (help > find examples) under Hardware Input and Output > DAQmx. These examples are a good place to start to build your application. If you already have the code work for each instrument and you have problems combining them, it might be easier to work with where you are at as opposed to leaving it everywhere.

• How can I make the portable speaker and headphones works at the same time?

  my sound card is a device high definition audio

  Hi Bernard,.

  It is not possible to use two devices at the same time in Windows 7.  You can have only one default device at a time.

• DBconsole agents and oem12c can operate at the same time?

  Morning and thanks for taking my question!

  I'm DBConsole migration to oem12c.  I want to check that I can install the agent on the target database oem, while DBConsole still works the old-fashioned way?

  Also, would include installing DBConsole emca - deconfig dbcontrol db-rest drop and the removal of the target database sysman?

  Thank you!

  Kathie

  DBcontrol or DBconsole is independent of any agent who and both can run on the same machine. DBcontrol is a standalone product and can handle databases on a local computer. When you install Oracle Management Server, you need to specify and use a separate database with its own SYSMAN account for the SGD server repository. You can add all the machines with the WHO running agent. Note that there are no more DBconsole or DBcontrol in database 12 c, which has been replaced by DBexpress and is much more limited.

• Why these two loops while cannot work at the same time?

  I place two same while loop in the block diagram, and then use highligt and one-step run function to observe their parallel operation.

  But I discovered that this two loop operate alternately and cannot operate simultaneously.

  Can someone help me understand this?

  My software environment:

  OS: Windows XP SP3

  LabVIEW: student editions 2011

  CPU: intel P8400

  Hi, GerdW

  Thanks for the reply

  I post a video to illustrate my question.

  While I press a strong of the run, I find that these two loops does not begin at the same time.

  While the execution of a loop, the border on the other became dark.

  It seems that during an iteration in loop 1 run, the loop2 keep waiting. and then the loop2 iterate while loop1 keep waiting.

  I do not know why this happens

  Sincerely