Only a part of a query ReadProcessMemory or WriteProcess memory has been completed.
It happened when unpacking a software download. I deleted the program and downloaded again and got the same error when you try to install. I use WIndows xp service pack 3 with a brand new computer.
Hi Diane to Atlanta.
1. using any disk to install the program on the computer?
2. did you of recent changes on the computer?
3. are you able to install other programs on the computer?
4. what program you are trying to install on the computer?
See the article and check if that helps.
When you try to use the CD drive in Windows XP, you receive the error message "the request cannot be performed because of an i/o device error"
http://support.Microsoft.com/kb/891894
Tags: Windows
Similar Questions
-
the sticker on my laptop has disappeared/deleted and I am not able to see the full key for windows vista operating system has been pre-installed on the laptop and now she asks activation and I did not quite correct key because he got faded/deleted, how can I get the key to work on the laptop I have compaq-presario-cq60-420 US laptop.please help me or give me the microsoft contact numbers where I can get my key of windows vista back by providing the serial number and the product number for my laptop. I am unable to work as the laptop does not work without the activation key.
Hello
You can use a magnifying glass and a flashlight to see if you can read the numbers of the product key on the label.
Or take a picture of it and expand it on the screen.
______________________________________________________________
Also that, read also:
You can contact your computer manufacturer and ask them to send you a set of recovery disks and to reinstall the operating system.
They should do this for a fee, if they still have available to them.
_____________________________________________________________
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
____________________________________________________________
And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.
Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.
If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.
The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.
See you soon.
-
Use only a part of a track when adding music to a slideshow
Is it possible, and if so, what are the steps to add only a part of music followed by a slide show? With the help of photographs. 1,5.
Thank you!
Hello mjfriedman,
Please use the Apple Support communities to post your question. Photo slideshows are a great way to show these great pictures of your collection. To use only a part of the track in your project, you will need to use another application to cut and edit the track first, before add you it to the slide show. GarageBand is an excellent application which can be used to change the part of the track that you want to use with your slide show. Please see the links below for more help.
GarageBand for Mac: divide the regions in the field of securities
Photos for OS x: creating and working with slideshows
These links should help you with the sharing and use of this track in your project. The end result is going to be great!
Have a great day.
-
Satellite Pro A60 - Windows XP shows / use only a part of RAM available
Hello guys!
I am facing strange problems with one of my two A60s. I just upgraded two of them with 1024 MB of RAM the same. One works perfectly, but the other will show me only 410 MBs in Windows. The BIOS indicates the correct size. I changed the RAM from one to the other, but this strange error is always present. The version of the BIOS has been updated to 1.90 and has Windows XP SP2.
Do you have any suggestions or ideas? Is there an easy way to put the management of RAM in Windows?
Thank you in advance!
Ralf
It s very strange.
I found that an additional Satellite Pro A60 info has been delivered with a different hardware configuration.
Some A60 Pro comes with an internal memory of 512 MB and others with only 256 MB internal memory.
In addition, the internal memory modules cannot be deleted and there is only one slot for memory upgrade.But I put t know why the OS shows only 410 MB
Oh, I forgot to mention that the graphics card, also use the part of the main memory and, therefore, the operating system of shared memory could indicates a value of different memory.
-
How can I print only the part selected a page?
When I highlite prints part of the entire page. How can I print only the part selected page?
Try:
Highlite your text
Press CTRL + P to start the print menu
"All" is selected by default in the scope . Change it by selecting 'selection ', and then click OK.
This example shows only the text that is selected. Microsoft® Security MVP, 2004-2009
-
Is it possible to burn only a part of a song (from my library) to a CD?
Burn a song
Is it possible to burn only a part of a song (from my library) to a CD? I'm burning about two minutes in the middle of a song on a CD.
Is it possible to burn only a part of a song (from my library) to a CD? I'm burning about two minutes in the middle of a song on a CD.
Install Audacity. It allows to change the song > then "export as MP3 > then burn it to a CD."
Audacity is free. I use it quite often. It's good enough for me.
http://Audacity.sourceforge.NET/Download/Windows
Audacity tutorials
-
Windows Sidebar is the only open part
Original title: windows sidebar
my windows sidebar is the only open part how to reinstall the sidebar?
Hi JohnRobinson,
1. you receive messages or error codes?
2. you remember to make changes to the computer before this problem?
Step 1:
You can read the following article and try the steps:
How to restore the sidebar of Windows?
http://support.Microsoft.com/?kbid=963010
Step 2:
You can try to run a SFC scan and check.
This problem may occur if a system file is missing or damaged.
You can refer to the method-the System File Checker tool in the following article:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Hope this information is useful.
-
My HP C5280 printer only prints part of photo
Original title: Mr
My HP C5280 printer only prints part of photo
My HP C5280 printer only prints part of photo
· try to uninstall and reinstall and use the latest printer drivers for your model of hp
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the other links here
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Walter, the time zone traveller
-
My kodakESP5 will not print all the object I want to print only a part of it
My kodak ESP5 will not print all the object I want to print only a part of it
Hi jakenny,
You may need to replace an ink or toner cartridge. Check the status information in the queue for low ink or toner messages. If the printer has a status or display area, you can also check for low ink or toner messages on the printer itself. For more information, see change an ink or toner cartridge and view the print queue.
Follow the instructions below that may help you resolve the issue.
Method 1:
See the link below and check the print settings.
Choose printing options
http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-options
Method 2:
Try to update the printer driver which might help you resolve the issue.
Click on the link below for more information on the updated printer drivers.
Find and install printer drivers
http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
Check whether the problem is resolved.
For more information, please see the link below.
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?
haben
Looking at the specs of your camera (SJCam 4000), we already know what video compression your camera uses. It is H.264.
A H.264.mov file should be accompanied by a first elements 11. On what computer operating system is your first items 11 running?
You have the latest version of QuickTime installed on your computer? And, you use QuickTime and first of 11 elements of a
Account user with administrative privileges? Please go to Premiere elements 11 publish + share/computer/QuickTime to confirm that you will find
presets it to the choice of QuickTime, it.
What are the properties of these files H.264.mov - is it 1080 p (1920 x 1080 p 30) 30 or something else? Do you know if this device is registering with a variable or
a constant rate?
Please check and review and then we'll decide what next.
Thank you.
RTA
-
Items purchased and it appears I have got only the part of editing photos and movies. How can I get part 2 of my order?
Please post related queries from Photoshop Elements
-
Is there a way of only not to run a query on the rendering of the table?
Is there a way of only not to run a query associated with an af:table on the rendering of the table on the page?
I want to this control programmatically.
Examples will be very appreciated.Yes, there is.
{: identifier of the thread = 2362354}
-
How send only a part of a sequence to yet?
Hello
I'm new to CS5.5 and I tried to find a way to send only a part of a sequence to the still body. I see in the help file that it says just that, but it does not explain how to do this (or I couldn't find where it is explained). When I use "send again" with links dynamic, it sends the entire sequence, even if I tried the marking in/out or tagging of the section I want with the SPACEBAR to work. Is it not possible to do so using dynamic links?
Thank you!
Steve
You can not. Nest of the sequence, then reduce to what you want. Send the new sequence.
Edit: help actually said that you can EXPORT a part of a sequence. The dynamic link (send to still) says only that you have selected a sequence.
This is also true if launch you the Encore DL. You can only select (all) sequences.
-
Is there a way to make only a part of the timeline?
Wel the title says it all I guess: is there a way to make only a part of the timeline?
Yes. Place a marker and use keyboard shortcuts 'B' to set the inpoint and 'n' to define the out-point on your timeline. Good luck
-
Retrieve only the part number of a varchar column using select
Hi all
I have the type of lines
GauravSer101
GauravSer104
GauravSer106
Gerard-Ser1789567
Approve-Ser1789456
in a table.
I need a select statement that returns only the part number associated with specified items, above, so my output should be like this
101
104
106
1789567
1789456
From this point, it is fixed as characters last few must include numbers. That is to say a finished element always at least one digit.
Can someone please indicate such a select statement?
I really need to sort items based on the part number are attached to them, not on the entire element.
Kind regards
Gerard3 order of rtrim (translate (lower (col1),'0123456789 ', ' 0000000000'), '0') / / desc
4, to_number (ltrim (translate (lower (col1), 'abcdefghijklmnopqrstuvwxyz',' @'), ' @')) CSA;I would avoid to enter whole alphabet:
SQL> select col1, 2 trim(translate(col1,'0123456789 ',' ')) alpha, 3 to_number(trim(translate(col1,translate(col1,'0123456789 ',' '), ' '))) num 4 from t 5 order by trim(translate(col1,'0123456789 ',' ')) desc, 6 to_number(trim(translate(col1,translate(col1,'0123456789 ',' '), ' '))) asc; COL1 ALPHA NUM -------------- -------------------------------------------------------- ---------- GauravSer100 GauravSer 100 GauravSer101 GauravSer 101 GauravSer102 GauravSer 102 GauravSer1000 GauravSer 1000 ApproveSer100 ApproveSer 100 ApproveSer101 ApproveSer 101 ApproveSer102 ApproveSer 102 ApproveSer1000 ApproveSer 1000 8 rows selected.
Nicolas.
Maybe you are looking for
-
Errow 8.1 Windows to all 3 of my computers
Firefox does not work on computers windows 8.1. It does not completely close and then does not open with this error message. Attach... [email protected]... The window displays the message firefox is already running but is not responding. To open a ne
-
Need new AC adapter for Satellite Pro A300-1BV
HelloMy adapter is dead and now I want to buy a new one in the online store.I have an A300-1BV. Anyone know the code of compatible adapters? Thank you (Sorry for my bad English...)
-
How to run the VI developed in labVIEW 2011 in its previous versions
Hi all I am currently using LabVIEW 2011 in my PC at home. But, all my school's computers are installed with LabVIEW 2010 and 2010 SP1. How to run the VI developed in LabVIEW 2011 in its previous versions? Is there any conveter why? Concerning Prasan
-
Receiving the message: will not accept connections on port 7088.
Why do I get will not accept connections on port 7088?
-
Random walk showing in hard drives
In the last week, I had a random drive appear in my region of the hard disk drives. When I try to open, it gives me an error that says: Q:\ is not accessibleAccess is denied Now, I'm the administrator of this computer, a PC at home with Win7 Pro. I