-Only - not possible to display in my car with iOS 10 offline music

Similar Questions

• Not possible to recover the Satellite Pro with recovery CD

  I have a laptop Pro satellite that I set for my sister in law... .long history... (don't remember model No, as I m at work at the moment!) but its only 4 weeks old and she had done something redicuous in it, so I decided I would use the recovery cd to reinstall the operating system.

  Decompresses the image on the disc, it tells me to remove the source, and then restart your computer. On reboot, the system is fair in the xp loading screen then a windows message will appear saying "Windows is not fully installed - please run the Installer", then it restarts!

  This is a common problem, or anyone can shed some light on this, since it is a new laptop, nothing done to the material and I'm using the correct cd that came with the system.

  The system went twice in xp and started the installation wizard (where you put in your usernames and passwords), once this finishes and he attmpts to go directly into xp, I get a blue screen and the inevitable gel!

  I don't want to sound pious, but please don't ask me if I checked the hardware is attached or anything, I'm actually a technician for a farm, I have just no experience of this problem of recovery cd or the Toshiba machines.

  Any help guys out there could give me would be greatly appreciated as Id hate to have to return a bloody new laptop to the manufacturer, unless its absolutely necessary.

  Thank you very much
  Andy

  Hi Andy,.

  The restore CD contains a "ghost image" of the operating system that will contain the system of basic Windows and most of the drivers and specific software from Toshiba.

  Boot from the restore CD normally takes a Win98 operating system and then restore the image of "ghost" on the hard drive.

  Normally, the recovery process will ask you if you want to restore the entire C: drive or use the 'expert' mode in which you can partition the hard drive. Obviously if you reach the point where the system then restarts the restoration of the "ghost" image is complete and the Windows installation process began

  I can only assume that there must be a problem with the disk hard if the 'Set up' process problems later. As an IT professional, you can access a boot CD appropriate (such as Norton Disk Doctor) in which case I would suggest scan you the hard drive for potential and problems if necessary to return the laptop under warranty for repair.

  Kind regards

• "It is not possible to use 64 bit" Message with ESX guest on Windows 7 x 64 host

  I get the "you have configured the virtual machine to use an operating system 64-bit client.» However, the 64-bit mode is not possible. This host is capable of VT, but VT is disabled.

  Enabled virtualization in the BIOS, I get this message. I also tried to activate and deactivate the "Trusted Execution" on the CPU, nothing works.

  CPU is Intel Core 2 Duo T7300 in a HP Compaq 6910p and well of course x 64 capable, as the host is running Windows 7 x 64.

  I rebooted, reinstalled the workstation, no idea why I continue to get this message?

  While making sure, but do you have you completely power off your system after installing VT turned on in the BIOS?

• WebVPN not works of harbors (https or http) with IOS - 12, 4 (24) T5

  I have a router with IOS-12-877, 4 (24) T5

  My problem is when I try to connect to https (or http) from outside to open the web portal to connect using WebVPN (SSL VPN)

  He never answers!

  I can connect to the public IP address of the inside of LAN, instead may open the webvpn Portal download anyconnect and establishing the SSL VPN.

  I can connect to my local network using Cisco VPN Client from outside and I have a VPN from Site to Site also works.

  This is my config (without data):

  ---------------------------------------------------------------------------------------------

  ---------------------------------------------------------------------------------------------

  877_Feria #.

  877_Feria #show run

  Building configuration...

  Current configuration: 7756 bytes

  !

  version 12.4

  no service button

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  hostname 877_Feria

  !

  boot-start-marker

  boot-end-marker

  !

  forest-meter operation of syslog messages

  logging buffered 52000

  !

  AAA new-model

  !

  !

  AAA authentication login ciscocp_vpn_xauth_ml_1 local

  AAA authentication login ciscocp_vpn_xauth_ml_2 local

  AAA authorization ciscocp_vpn_group_ml_1 LAN

  !

  !

  AAA - the id of the joint session

  clock timezone Paris 1

  summer time clock Paris date March 30, 2003 02:00 October 26, 2003 03:00

  !

  Crypto pki trustpoint SSL

  enrollment selfsigned

  full domain name no

  name of the object CN = vpnferia

  crl revocation checking

  rsakeypair SSL_FERIA

  !

  !

  pki encryption SSL certificate chain

  self-signed certificate 03

  3082020E 30820177 02020103 300 D 0609 2A 864886 F70D0101 04050030 A0030201

  13311130 0F060355 04031308 76706E66 65726961 31313033 31343037 301E170D

  5A170D32 33353338 30303130 31303030 3030305A 30133111 55040313 300F0603

  0876706E 66657269 300 D 0609 2A 864886 F70D0101 01050003 6130819F 818D 0030

  81009F30 81890281 1B5E0CF6 F3376884 9C8D3749 237D3F13 CB9728D1 B 0712, 635

  7293B 978 6BE81A2F 06951D 72 C30178C0 91B4786B 7E701B59 62622 HAS 31 96D023C1

  BDB82295 E4E77FC8 97BF34CA 16B03F53 5EC21F5E 88BA12E1 E5D12729 58136 HAS 53

  76E35D33 1A99EF9F E7B034D6 EB3CF17C A73ECAA1 326573DE 164BB1F3 5EA8EE17

  4AB73CD3 22950203 010001A 3 72307030 1 130101 FF040530 030101FF 0F060355

  0603 551 1104 16301482 12383737 5F466572 69612E66 65726961 301D 2E657330

  1 230418 30168014 51E4D8C7 6347B08A D3CB8F2E F4E4C400 061DB6B4 1F060355

  301D 0603 551D0E04 16041451 E4D8C763 47B08AD3 CB8F2EF4 E4C40006 1DB6B430

  010104 05000381 81008160 0AAD04E3 D247EA6C C1F6E93C 0D 864886F7 0D06092A

  5D0B4C8F 25319E30 8EBABE6F 50E53F7D 57DE0F8A 13BB3212 642C4EAC A32610A6

  75D6568E DA5CEF92 E59D511B 80186AF8 73CC11E6 F1E82065 C47E6B60 82BCA939

  9FF3F06D E3858349 3007AFC2 A2F0CE59 809FA1E1 F2B7FEA1 9B13E8AA 1FEF6AF1

  96E627FC 481642F4 A466EFE7 C 8124, 374 044F

  quit smoking

  dot11 syslog

  IP source-route

  DHCP excluded-address IP 10.10.10.1

  !

  DHCP IP CCP-pool

  import all

  Network 10.10.10.0 255.255.255.248

  default router 10.10.10.1

  Rental 2 0

  !

  !

  IP cef

  IP domain name feria.net

  name of the IP-server 192.168.254.3

  !

  !

  !

  !

  username privilege 15 secret 5 user1 zMca $1$ $ 0AkwxrsfBY63XPUHxv31N0

  username userVPN secret 5 $1$ $8iKr 8WV5IhFUmI671.XGp3Gb11

  username userWebVPN secret 5 $1$ $3HPK tvFjfrQd86iAoHGsa5Uu01

  !

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  ISAKMP crypto keys interkey address 8.2.24.3

  !

  Configuration group isakmp crypto CiscoVPN client

  key 123456

  pool ippool

  10 Max-users

  netmask 255.255.255.0

  ISAKMP crypto ciscocp-ike-profile-1 profile

  identity CiscoVPN group match

  client authentication list ciscocp_vpn_xauth_ml_1

  ISAKMP authorization list ciscocp_vpn_group_ml_1

  client configuration address respond

  virtual-model 2

  !

  !

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac

  !

  Profile of crypto ipsec CiscoCP_Profile1

  game of transformation-ESP-3DES-SHA1

  set of isakmp - profile ciscocp-ike-profile-1

  !

  !

  map SDM_CMAP_1 1 ipsec-isakmp crypto

  Description Tunnel to8.2.24.3

  defined by peer 8.2.24.3

  game of transformation-ESP-3DES-SHA

  match address 101

  !

  Archives

  The config log

  hidekeys

  !

  !

  property intellectual ssh source interface Vlan1

  !

  !

  !

  ATM0 interface

  no ip address

  No atm ilmi-keepalive

  waiting-224 in

  !

  point-to-point interface ATM0.1

  IP 8.3.8.6 255.255.255.240

  NAT outside IP

  IP virtual-reassembly

  PVC 8/32

  aal5snap encapsulation

  !

  map SDM_CMAP_1 crypto

  Crypto ipsec df - bit clear

  !

  interface FastEthernet0

  !

  interface FastEthernet1

  !

  interface FastEthernet2

  !

  interface FastEthernet3

  !

  interface virtual-Template1

  ATM0.1 IP unnumbered

  !

  tunnel type of interface virtual-Template2

  ATM0.1 IP unnumbered

  ipv4 ipsec tunnel mode

  Tunnel CiscoCP_Profile1 ipsec protection profile

  !

  interface Vlan1

  Description $ETH - SW - LAUNCH, INTF-INFO-HWIC $$ $4ESW

  IP 192.168.254.240 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  IP tcp adjust-mss 1452

  !

  IP local pool ippool 192.168.253.1 192.168.253.10

  no ip forward-Protocol nd

  IP route 0.0.0.0 0.0.0.0 ATM0.1

  IP http server

  access-class 2 IP http

  local IP http authentication

  IP http secure server

  IP http timeout policy slowed down 60 life 86400 request 10000

  !

  IP nat inside source map route SDM_RMAP_1 interface ATM0.1 overload

  !

  access-list 1 permit 192.168.254.0 0.0.0.255 connect

  access-list 2 allow one

  access-list 23 allow 10.10.10.0 0.0.0.7

  Note access-list 100 CCP_ACL category = 19

  Note access-list 100 IPSec rule

  access-list 100 deny ip 192.168.254.0 0.0.0.255 192.168.0.0 0.0.0.255

  access ip-list 100 permit a whole

  Note access-list 101 category CCP_ACL = 4

  Note access-list 101 IPSec rule

  access-list 101 permit ip 192.168.254.0 0.0.0.255 192.168.0.0 0.0.0.255

  !

  !

  !

  allowed SDM_RMAP_1 1 route map

  corresponds to the IP 100

  !

  !

  control plan

  !

  !

  Line con 0

  no activation of the modem

  line to 0

  line vty 0 4

  access-class 100 in

  privilege level 15

  connection of authentication AutClient

  transport input telnet ssh

  !

  max-task-time 5000 Planner

  !

  WebVPN gateway gateway_1

  hostname 877_Feria

  IP address 8.3.8.6 port 443

  redirect http port 80

  trustpoint SSL SSL

  development

  !

  WebVPN install svc flash:/webvpn/anyconnect-dart-win-2.5.2017-k9.pkg sequence 1

  !

  WebVPN context VPN-Feria

  secondary-color white

  color of the title #FF9900

  text-color black

  SSL authentication check all

  !

  !

  policy_1 political group

  functions compatible svc

  SVC-pool of addresses "ippool.

  SVC Dungeon-client-installed

  virtual-model 1

  Group Policy - by default-policy_1

  AAA authentication list ciscocp_vpn_xauth_ml_2

  Gateway gateway_1 field vpnferia

  10 Max-users

  development

  !

  end

  ---------------------------------------------------------------------------------------------

  ---------------------------------------------------------------------------------------------

  This who can miss?

  Thank you all!

  Try adding a NAT statement for outdoors.

  IP nat inside source static tcp 8.3.8.6 443 8.3.8.6 443

  assuming that 8.3.8.6 is your public IP address.

  -Brian

• BlackBerry Q10 delete on handheld only not possible on Q10

  Anyone know how to delete on handheld on the Q10 - some things are easier to work from a tablet or a laptop and do not want them singing my pocket computer...

  At the moment there is no way to delete only on the handheld. The Q10 and Z10 devices are true e-mail clients, different from the old system BIS that letting us know. Removal of your handheld will remove from the server.

  Here's a knockout who describes the behavior and provide a workaround:

  http://www.BlackBerry.com/BTSC/KB34912

• Is it possible to display a dialog box with the fields/custom controls for the Windows Vista login screen to the top.

  Hello

  In Windows XP (prior to Windows Vista), a Service could be interactive and display a window/dialog on the login screen.

  Of course services are no longer allowed to be interactive, and certainly, I agree that it is an improvement in security.

  However, say if I wanted to do one of the following values, which is possible (and how to implement). I don't mind what language I have to set in.

  (1) add a button in the login screen that says "Reset Password" which will then invite a form with questions of security.

  (2) run an application within the login window

  Really appreciate any help on this matter,

  Mark

  Hi Mark,

  The question you posted would be better suited in the MSDN Forums; We recommend that you post your question in the MSDN Forums to get help:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  See the following for more information Microsoft article.

  http://blogs.msdn.com/b/securitytools/archive/2009/07/30/how-to-build-custom-logon-UI-s-in-Windows-Vista.aspx

  http://blogs.technet.com/b/Aho/archive/2009/11/15/custom-credential-provider-for-password-reset.aspx

  Keep us updated on the status of the issue.

• Since the upgrade to WIndows 10, my update to Thunderbird is broken. Would it not possible to download one that works with 10?

  Everything else seems to work very well, but I'm stuck in my old version (31.7.0) because the updater won't load.

  There is no error message or another problem, I can not get the update at startup - not not using "Restart to update" and not find the "updater" application in the Mozilla Thunderbird folder and trying to start it manually.

  I'm tempted to simply continue to use it, but I don't know that I'll need a security update later.
  ... Who and custody of Thunderbird flashing me messages that new updates are available, which disappear quickly as they try to call the updater.

  I have not so coincidentally suggest it if that was the case. Setting and the program are completely separate. Something you want to keep in mind if you ever get rid of your computer.

• Is it not possible to convert PDF to JPEG with Adope Reader DC?

  I bought to Adope Reader DC and can not know to convert PDF to JPEG.

  It isn't possilbe with thisd program?

  Hello Simon,.

  Yes! You can.

  If you have Acrobat Pro DC, so you can easily export a PDF to JPEG.

  

  Let me know if you need more assistance.

  Kind regards

  Ana Maria

• Why not work apps strategy LP and letter with IOS 9.3.2 Cheats?

  The scanner in various applications, attempt at analysis screenprints on my IPad 2 Air stopped working in IOS 9.3.2

  Two suggestions:

  1. make sure you have the latest version of softwares glancing "Updates" in the App Store.

  2. double-click the Home button. Find apps and drag up to force close. Then try to open them again.

• OfficeJet pro 8000 A809n is listed as supporting Eprint, but implementation is not possible

  My printer (HP officejet pro 8000 A809n) is listed as supporting Eprint, but implementation is not possible. Can someone help me with this, or if my printer isn't compatible Eprint?

  I gues my printer HP Officejet Pro 8000 A809 does not support the ePrint. The HP Officejet Pro 8000 A811 does support ePrint.

• VPN using hotspot with ios 10 does not

  I often work off site and use my iPhone AT & T s 6 to attach my work Windows 10 Pro (processor ASUS T300CHI) Tablet.  Although many places I work have Wifi, most only allow VPN I need to connect to my work server.  After updating ios 10 (I'm on 10.0.1), I did have problems engaging, but VPN doesn't work anymore.

  VPN integrated Windows 10 Pro on my Tablet has an automatic configuration that appears to detect the type of configuration (IKEv2/IPSec/PPTP/L2TP, etc.) and you just put in user name and password.  According to my dept IT, the VPN connection in the office not only supports PPTP (I understand has been disabled with ios 10) but also supports IKEv2 and L2TP/IPSec.  Nevertheless, I always left configuration VPN on Windows 10 in auto.  I tried selecting the connection type, but it did not work either.  Generally I get the error "failure of VPN tunnels.

  Any thoughts would be appreciated

  MattyBH,

  Please keep us informed if you were able to solve this problem.  I also have the same problem since the update iOS10.  I think it has to do with Apple, removing the IOS10 PPTP protocol... I was able to confirm the conclusion of downgrading to previous IOS 9.3 and my VPN works very well, unfortunately my users with iPHONE7 cannot sink their IOS and now can not access VPN through hotspots iOS10

• Display driver update is not possible on Satellite L350

  Hi all

  I have the card view "mobile intel 965 express chipset family" with the version of the driver 7.14.10.1329 (13.09.2007)
  Pretty old for Vista...

  Site Web de Toshiba only gives me this driver - no updates so far!
  On the site of intel, I found a new necessary with the version 15.12.2.1637

  Updated via Device Manager is not possible, that it is said that my version is the latest...?
  Update through exe is not possible, that it says that the installation was successful, but it was not validated...?

  How should I proceed?

  BTW: my laptop is L350 - 12 c

  Before update you the display driver, you must remove the old one. Then, restart the computer and install the new drivers via setup.exe or in Device Manager.

  On the Toshiba site is a newer driver for the Satellite L350 available you have (7.15.10.1502). So, you should try this one:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• JDeveloper 11.1.2.4: Is it possible to display only custom validator ID defined in faces-config. XML

  I have several custom validators and do not need to see the default values listed in the screenshot below:

  http://i.imgur.com/xOQgxeZ.PNG

  Is it possible to display only custom validators that I defined in faces-config. XML?

  Thank you

  Wes

  Deepak,

  do not understand this sentence:

  "Do not specify the binding attribute value in the tag of f: validator for links do not display.

  Wes,

  The answer to the question seems to be 'no', you cannot remove other validator entries as they are too configured in a faces configuration file - but not that of the application

  Frank

• Tecra A7: Not possible to update driver display for Mobile catalyst 6.9

  I tried to update my display drivers for Mobile catalyst 6.9, but during the installation, I get this error annoing: "failure of the installation run installation: an error occurred during a seek operation.

  I tried to uninstall the old drivers and then installing the new, but I get the same error and I don't know the cause. A few days ago that everything works perfectly, so I guess it's a software I as causesc this problem.

  Help, please!

  Hello Vlad

  It is well known that on most new units is not possible to install the graphics drivers designed by graphics card manufacturers. He is always shown in Setup error as in your case. It's the material.

  Graphic driver Toshiba designed is a kind of sanitized version. Sorry, but I'm afraid there is nothing to do. You claim your previous assignment of fan performance. If this driver can be installed, I fear that this graphics card may be forced to run faster and produce more heat.

• car multimedia player does not display the titles of the songs as the music advances

  iPod nano plays until 2015 Chevrolet media player on the radio, properly displayed and all playlists. But as the songs to change track information does not work. Unless the player on the car is advanced manually and then the current song information is displayed while music plays. When the next song comes on the information does not. Any ideas out there? Restarted the nano and not help.

  With modern car audio systems, iPod is just acting as a storage device (as you connect a USB FlashDrive with music files).  The iPod is not determinative of the reading; the car audio system is to play music files.  So, I think that this problem is related to car audio system, not the iPod.