Only supports HP Probook SATA 3 [6 Gbps]
Hello
I have a printer "hp probook 4520 s ' two years now. I desided to upgrade the HDD with a SSD [Pro - 500 GB Samsung 840]. What I notised, it's that the ssd reads and writes with half the speed (250 MB/s instead of 500 MB/s). I installed "Samsung magician" (utility Samsung to optimize the ssd and motitoring) on my laptop. The utility above indicates that I did all the necessary OS tunning (power TRIM, optimazing etc.), but there was a single message: 'your system does not support a SATA 6 Gb/s (SATA 3) ports' (see image below). I believe that HP ProBook 4520 s supports "SATA 6 Gb/s". My questions are: (1) fact ProBook supports SATA 6 Gb/s? (2) if not, can I upgrade the hardware/software to support SATA 6 Gb/s and how?
Concerning
Hello
The bandwidth is 3 Gbit/s, which means that controller is SATA 2 and it shows your SSD SATA 3. No, you can't unless change you the motherboard and a few other things = new machine.
Kind regards.
Tags: Notebooks
Similar Questions
-
MacBook pro is only supported when it is turned off
MacBook pro is only supported when it is turned off
What can I do?
Have you tried a SMC reset?
https://support.Apple.com/en-us/HT201295
What happens when the MBP is on? How do you know that it is not reloaded?
Ciao.
-
I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download. Is it because iWeb can only support a limited number of links, hypertext, or any other reason?
It has been much discussed.
See my solution in this post:
-
Satellite R630-146 does support disk HARD SATA II (SATA-300)
Hello
I intend to change my current HITACHI 5K 320 320 HARD drive (HTS543232L9SA00), which is SATA I (* SATA-150 *) on the new HARD drive, but I can't find all the information my Toshiba Satellite R630-146 will support the new SATA II (* SATA-300 *) HARD drive.
Maybe someone has any ideas where I could find this information?
Thank you
VaidasHello
I m sure that SATA II hard disks are supported.
The fact is that the laptop supports the SATA controller and SATA II is down-compatible with SATA I. So it shouldn't be a big problem with the SATA II HARD drive, even if the controller would be SATA IWelcome them
-
I need to post a tutorial for some training company corporate site only supports Microsoft Windows. I'll buy a MacBook in the coming weeks when I go to training and I wonder if there is a way to load windows on an external drive and launch it on my MacBook? I know you can use bootcamp, but I don't want to burn up that much of my Flash memory by placing it on the MacBook itself. I have a 1 to Seagate that I use on my iMac at home for Time Machine. Could just operate with Windows on it to visit the society tutorial with my MacBook?
Boot Camp will not allow that.
It is possible that one of the many emulators Windows for Mac can allow you to run with such a disk configuration.
-
The Dell Poweredge C6100 XS23-TY3 server: Max supported 3.5 "SATA HDD TB size
Hello world
Is someone can please tell me that what is maximum supported 3.5 "SATA HDD by Dell Poweredge C6100?
Thank you
-SaidHello Saeed
The SATA drive bigger than we sell to the C6100 2 TB, but we sell Nearline SAS up to 4 TB of the C6100. I see no reason for a SATA drive more 2 TB should not operate.
Thank you
-
XPS 15 (9550) first color "Application only supports genuine Dell devices.
Hello
Trying to get rid of the issue hogging the first memory color by installing the latest driver. Driver Intel update ok, but the error 'Application only supports of genuine Dell devices' when I try and install the first color (software - Images_Application_RJ00H_WN32_2.0.199_A00.exe) update
Install failure report
The problem, however, is that some of us can not install the.update because it makes Dell hardware no authentic account.
-
Alienware Aurora R2 - have SATA 3 (6 Gbps) connection for SSD?
I need to replace my faulty hard drive on my Alienware Aurora R2. I was going to get an SSD, but only if I have SATA 3 (6 gb/s). I think that I searched for at least an hour trying to figure this out with no luck.
Can someone help me?
Thank you
Please edit your post to remove the Service tag. This is a violation of the terms of the forum to post a Service tag. You should consider the Service tag as info personal and private, to be shared with employees of Dell and never in an open forum.
You'll have a better answer to your question if you re - post (without serial number) in the forum of the Club of Alienware .
-
When I'm in split mode, I can't see my pictures. I think it is due to the fact that the server my images are now only support connections made on TLS version 1.2. Is there a setting in DreamWeaver, I can change to take account of my images be seen? Then I see mode live view but not in the edit view. I use DreamWeaver CS5
It's normal when you are in mode split with Code and design, while the external use referenced images. There is no setting to fix it.
As a work around, I normally keep a copy local images in a file of site when working on an html email, then just before the code for the e-mail service hovers over, I'll do a quick search & replace to add the absolute paths for images server copies.
Live View mode should show images correctly, but editing is not possible in DWCS6 although later versions now have an editor in Live mode.
-
Just purchased and downloaded Lightroom 6. Failed installation: "Product is only supported in 64-bit" machines, mine eviently is 32. This problem can be corrected or should I "return" / cancelled the purchase. If so, how should I proceed? Thank you.
Please contact the Support from Adobe on the Customer Contact
-
PowerShell Plugin only supports version 2.0 of Powershell?
I'm looking, and it seems that the PowerShell Plugin only supports version 2.0 of Powershell. Microsoft is currently at version 5.0. What is the problem? VMware has renounced this Plugin? I'm wrong and it really supports a newer version of Powershell?
See here: Technical preview of VMware vCenter Powershell plugin 1.0.x version
We supported until PowerShell 4.0 since the 1.0.4 version of the plug-in
-
Virtual machine has 12 virtual processors, but the host only supports 8?
Hi all I am using ESX 5.1 and have a machine Windows 2012 R2 Standard of virtual (vmx-09) comments that I'm moving to 8 processors to 12 processors. But when I turn on the virtual machine after changing the UC 12 I get the error message
"Virtual Machine has 12 virtual processors, but the host only supports 8. The number of virtual processors can be limited by the selected guest OS for the virtual machine or the granting of licenses for the host".
Now, I know that 2012 R2 Standard Windows can handle 12 processors and I thought that ESX 5.1 could also, but I'm wrong? This is the Standard of vSphere license 5. Thank you!
Hello
vSphere 5.1 Standard license has a 8 vCPU per VM limit.
Company = 32 vCPU
Business + 64 vCPU
You must upgrade to vSphere 5.5. This can be done with your vSphere license 5, as it is for all versions 5.X of vSphere and vCPU limit has been deleted in 5.5.
So you can have as many vCPU per VM that your host has logical cores.
Tim
-
and is ODI only supports 10 gr 2 XE?
Hello
IAM with 11 GR 2, enterprise edition and am setting up Oracle Data Integrator 11g (11.1.1.5.0)
for Microsoft Windows (x 86) but by creating a "master repositories' step
even if I just correct also to username and password and my interlocutor. Get error like below
-07229 unable to connect to the database with the given credentials.
Listner could be down.
and is ODI only supports 10 gr 2 XE?
what he needed by skipping this step... after the end of the installation, I can create repositories of masters and work
from downstairs?
http://St-curriculum.Oracle.com/OBE/FMW/ODI/odi_11g/ODImaster_work_repos/ODImaster_work_repos.htm
Please help me.
Published by: starting December 9, 2011 12:34 AM
Published by: starting December 9, 2011 01:02I understand that you may wonder what is the fundamental thing to learn ODI. is it?
If yes then it is easy. As you are a pl/sql developer if you need very good idea by writing functions and procedure. You can understand the code generated by odi.
If you have some idea on Java so it will be easy to understand jython. Because the KM are written using Jython.So I think that you can learn it quickly.
Thank you
-
I use the latest Adobe AIR and SDK, 3.5. The app works on my iPhone 5 and displays the loading screen, but by doing an app store version and upload I get this:
Dear developer,
We found one or more problems with the delivery of your recent for "eat sleep skateboarding". To process your order, the following questions must be addressed:
Invalid launch image - your application contains a launch image with a size modifier which is only supported for applications built with the iOS SDK 6.0 or later version.
Once these issues have been fixed, go on the release Details page, then click on "Ready to Upload binary." Continue through the submission process until the status of the app is "Waiting for Upload. You can then deliver the binary has been fixed.So he complains on my [email protected] I think. If I delete it, he could accept the file, but I really want to a loading screen. So, how can I fix? I only find solutions for xcode developers
You are probably not using the last available AIR SDK. Labs releases contained a bug leading to this issue.
So, update your AIR SDK from http://www.adobe.com/devnet/air/air-sdk-download.html should solve the problem.
-
Only supports java compile time polymorphism?
Hello
Only supports java compile time polymorphism?Java supports two polymorphism of time and duration of compilation. "Overload of the method" is example of compile-time polymorphism. "Substitution method" is example of runtime polymorphism.
Maybe you are looking for
-
Firefox does not start until the wifi is active
I'm trying to use the latest firefox (v32) on Debian/testing/64-bit by using the 64-bit version of FF... This machine is a laptop and is used only with wifi. The wifi that is usually used is a Starbucks or McDonald's who require a click on a Web page
-
OfficeJet 5740: Y at - it a Fit - to - Page Scan Option?
When I scanned a form of Government that is located on a sheet of 8.5 "x 11", but has only a 1/4 "left, right, top of page margins and 1/8" margin on the bottom, the preview shows low 1.5"shape and the part of the text on the side cut margins. I sele
-
Homegroup not detected on computers
Hey there. I have a laptop and a desktop, both running Windows 7 Ultimate. The office is connected to a router and the laptop is connected wireless. However, even if they are on the same network, each computer can not detect a residential group, crea
-
It is a fantastic forum to learn how to use the Droid and to understand the problems. It is ideal to discover different applications also. My question is, where can I learn the ins and outs of applications themselves? For example, I installed the Dol
-
I can't change the lockscreen. How can I solve this problem?