Only the front panel cursor hand

Similar Questions

• HP EliteDesk 800 G2 Small Form: The front panel audio connector - this only made type to use for headphones and microphone

  Hello

  I am trying to determine what type of audio 3.5 mm plug to put into the connector on the front panel for the use of a headset to make video communications.

  could be - sleeve, ring and end cap (mono audio and microphone)

  or

  could be - sleeve, ring, ring and tip (stereo sound and microphone)

  Having read through the manuals and nothing is said on the type to use.

  Hello world

  Just plugged the connector 4 poles on my headset combination for my mobile phone (cellular) and the box of pop - up asked me to select headset or microphone - no selection for both.

  Looks like the right sleeve is for headphones only, and the left one is for headphones or micro - selectable by the user and not the two on a single sheet.

  Everything explained by the practice - but not the paperwork in the manuals.

  #5 for microphone or headset - menu popup is displayed after you insert a 3.5 mm plug to select that one but not both at the same time.  (So I can't use my headset to phone)

  Thank you

  Son

• Is there a way to put a button on the front panel only when clicked gives a pop-up dialog box with more information on it?

  Hello world

  The simulations that I create are very simple themselves but are intended to use in the classroom to help students learn more about the proven theory.  I hope to be able to place a 'help' or 'other info' button on the front panel that rises wants more info on theory, they can click on it and a pop up appears with background information on it.  It should also have a second button to close it and return to the main façade.  Can anyone lead me in the right direction?

  Thank you!

  Use a structure of the event on the main vi when the button is clicked, launches a "help" void / vi. On the inside of the Sub vi (with the set properties to load the front when it is called, of course), use another structure of the event to wait until then click on the button of the Subvi, you can return to the main VI. Do you need assistance on using the structures of the event?

  Charles

• Conflict of flow of data on the front panel

  Hello

  My vi is almost done, but I still have a problem with the front panel. I think that there is data traffic conflicts in my vi.

  When you run my vi, you will see the pop-up window asking you to set a path of file, control devices, selection of data to record and trace. Then, you might want to change the units, turn off all the buttons light and ok to select what data you want to save. Then click on RUN.

  The problem is; supposedly all the buttons are on by default, if you disable certain economies or tracing buttons to choose not to save, and then click RUN, after that all the buttons are again even if you have turned off before the race. They must stay off, if you have selected to save. The condition of main data flow is always the same be before running (only light buttons and ok).

  Do you have ideas of how to solve this problem?

  Thanks in advance

  You have what is called a race condition that usually slips in programs that use local variables.  If you look at your first while loop to read in the current value of the 'steam data hand' control and store in a shift register.  After the structure of the event outputs you write this offset value to register in the control and in the process of replacement of the changes that the user can do.

  A quick and dirty solution would be to manage the main event to change the value for 'Stream' in the structure of your event to update the shift register whenever the user changes the values in the control.

  A better solution would be to get rid of the shift registers and move local variables in the structure of the event.  As long as the option "lock the front until the end of the event" (I'm not sure of the exact wording and I work in the LabVIEW Base at the moment so I can't check) is selected it will ensure that you do not work in a race condition (you know the value cannot change inbetween you value reading, and you update the control).

  

  Even better would be to avoid local variables wherever possible.  This is general advice only and not not something that I can do much more tangible without knowing the details of how you want your application to behave.

  Hope this helps,

  Simon

• WANT 411c: MFP ENVY 411c lights on the front panel

  I find anywhere a note detailing the two LEDs on the front panel of the printer.  Of course, the left is the power light and the Start button / stop.  The other, 1/2 "to the right, has an icon as the icon of WiFi or wireless, or whatever it may be as an antenna with a radiating signal left and right of it.  What is this for?  It seems that there is a hole below and to the right of the symbol, but nothing ever shows up.  I turned off the wireless and turn it back on and or State shows a light here.  I reinstalled the software checks to see if that mattered and it made no difference.  I also unplugged the router and the printer, and that has not changed anything. It is connected to my wireless network and works very well.  What this has to do with some additional services such as ePrint?  I just lost some of them September 1, 2016.  Perhaps the only light when something just one of them?

  Hello

  That your work as expected wireless connection, there no problem with the wireless printer, just with his lamp wireless card.

  The lamp to indicate the wireless connection is turned on and must turn on once connected wireless.

  They have nothing to do with ePrint or any Web service, it must turn on once connected to a local wireless network.

  As you mentioned that you are connected and the printer maintain a wireless connection, it's probably just a blown bulb.

• e9180f: removal of the front panel? e9180f

  Hello, I need to clean my power swith (on the upper edge of the front panel) due to a spill of food products.  I have a side removed by removing a screw in the back and then dragging to the rear of the side panel. I don't remember if I already had the cabinet apart one more than this. The front panel can break, but I fear I will "break the BAD thing. I'm sure that WD - 40 or other cleaner used by switch electronic only should be OK. Thank you all for help.

  Please see HP document "remove the front cover HP Pavilion elite e9000, HPE-100 series desktop computers" for instructions on removal and replacement of the cover.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• The front panel ThinkCentre M81 connector pinout

  I have a ThinkCentre M81. I am currently trying to put the guts of it in another case, so that I can add some more to it. I checked all the guides I can find on Lenovo's Support site and they show only the location of the connector and how repalce the façade.

  I try to connect the connections for the front panel ATX standard for my motherboard M81, which I'm having trouble with, reason for the connector of the Panel before Lenovo comes to be a big connector.

  I wonder if this information is a resource that I missed somewhere, or if I have to trace the wires.

  It is not your model, but maybe they are similar:

  http://forums.Lenovo.com/T5/ThinkCentre-A-E-M-S-series/ThinkCentre-A60-front-panels-power-audio-and-...

• How to scroll through the front panel when running

  Hello

  I'm using LabVIEW 8.5. I want to scroll the front panel automatically according to the moving object. I enclose a vi for example, in which I move the image, but if it is out of range of screen I have to scroll manually horizontal scroll bar to see the position of the image, it is possible that it automatically scrolls according to my position of the object.

  -Thanks in advance

  Hi, Mary,

  Well, now I see what you wanted. From my point of view using front panel scrolling for this animation is wrong way (if not I do not know your final objectives).

  I would recommend that you use the image for this control. Here the work by hand a little more, but you will get better results and will not scroll to your façade.

  For example, "quick and dirty" implemented:

  

  Andrey.

• Security on the front panel does not work

  Hello

  I have a problem and a question:

  Problem: I created some controls on the front panel and some groups which they are responsible. Administrators can see and do everything, the operator cannot see some of them. If I build exe it works on development PC but if I copy them to another PC, it does not. It does not show these elements of façade. Areas are the same, SCADA, only the names of PC are different. The two computers are not in the same network. I create local domains and users on two computers through domain account manager. What could be the problem?

  Question: How can I create an access control list (ACL) and assign them to the elements of façade programmaticaly? What is the syntax? I have found no examples of code.

  Thank you.

  I found the solution. Maybe someone also needs:

  You must copy the folder C:\Program Files (x 86) \National Instruments\Shared\Domain development pc to other PC, in which you want to have the same field and same users. It does not have to generate the new domain with exactly the same name on another pc and generate new users. You must copy the whole directory of your pc to the other pc. It works now.

• pause button on the front panel

  Hello.

  I try to run synchronous, continuous analog conversion of 2 cards of PXI-6259, and capture the State of the several digital at the same time.  I managed to get everything is configured and working properly, however I have a problem if the user presses the button "pause" on the front panel.

  From what I can tell, acquisitions of data will continue to run in the background (I'm using a task DAQmx and stop was never called).  For my analog inputs, this is not a problem.  However, the digital inputs always generate a ' 200010 - on-board memory overflow error. Due to the limitations of system and/or the bandwidth of the bus, the driver could not read data the device enough fast to follow the flow of the unit. »

  Is it possible to register for an event of user interface that is generated when the user presses the button "pause", so that I can stop the acquisitoin of data before the error occurs?

  Thanks in advance,

  -Rich

  NormPgh wrote:

  I thought to add my own button "pause" / control, but my users have become accustomed to hitting the pause on the front panel button, and it will be difficult to get them to change.  I guess that the error would remind them :-)

  Well, that's easy to fix - change the appearance of window properties if the toolbar is not visible, while the code runs, and there will be a pause button for your users to click.

  Many of our applications have a function somewhat like this.  My colleague implementation in a very simple way: he put the graphical indicator within a box structure.  Connect a Boolean control "pause" to the structure of the case, and that's it.  Data acquisition runs constantly but will only update the chart when the pause button is false.  This approach might work for you?

• How to disable together them on the front panel lights

  I have a VI that the front panel is shown below where an indicator of the chain is having a problem. The witness here shows the value "Please save the value of Temp Air [C]".

  Problem

  When the indicator is clicked on in the front panel the text box becomes 'editable' in appearance (only) and I did not want this

  Question

  How to eliminate the behavior stated below in the second picture, when the indicator also displays editable? How can I simply leave the system in a State of photography ?

  -Normal front photo

  

  Photo of Two - front with click on channel indicator

  

  Justin,

  Try to turn off the indicator. Node property or right click Advanced-> checked-> disabled state.

  Steve

• Is it possible to call a .exe (non-LabVIEW, such as Notepad) in a child windown on the front panel?

  I would like to launch a stand-alone .exe inside the front of my VI.  It is a piece of software by the provider of a sensor that I try to incorporate in my VI.  I was able to find how to call the .exe using the .NET constructor and invoke nodes.  However, the application opens in its own window.  Is there a way to run from a child window within the façade (ideally, within a tab on the front panel control)?

  I'm in LabVIEW 8.6.

  Thank you.

  smercurio_fc wrote:
  I don't think that it actually works. My understanding is limited about this feature, but since I read it only works with the pop-up windows and windows that are already children. The application's main window is not a child window.

  I've done it before.  I have attached a simple example using Notepad.  Make sure that the notebook is already open no open files.  Since the example is not the position of the child window, the position relative to the window will be the same, because it is off the desk.  So, make sure the upper left corner of the Notepad is close to the origin of the desktop computer.

• Hide / disable the front panel

  Long story, long:

  I created a little utility like a VI.  The utility accepts command-line arguments, reads a file, outputs (using .NET) on the console, and then must close.  The front panel is empty, and the program is expected to completed in a fraction of a second.  In fact, I bet that "demand" fresh General takes longer than the actual program.  I would have coded in another language, but I can read only the cluster in a binary file with LabVIEW.

  Environment:

  Windows XP, LabVIEW 8.2.1, .NET Framework 3.5

  Short story:

  How to prevent a LabVIEW program displaying the front panel and appear in the taskbar?

  There is also an option to simply close the front panel, try with 100% transparent option also

  

• Disabling the controls on the front panel

  Hello

  Currently, I am working on trying to disable/gray out between 10-20 controls on the front panel when you press a start button and then allowing them the end of the test. Currently I use the property nodes, all of which are connected to a constant of the State in which I want that works perfectly. My question is that there is another way other than having a bunch of knots of padding property to the top of my structure of the event. Ive read where people had Subvi, which has used references to make this same feature, but is there a way of doing things in the block diagram of my current VI? Thank you!

  Need references of your controls on the front panel, so this can be fast, because you can select more than one, and with a right click you create references.

  I have attached a version LV2010.

  Edit: another review:

  Must be created only once these references. Usually, it's comfortable group all the references in a cluster, use this thread through your entire code. This way you can just ungroup references to the actual location, you have to play with, put them in a table and use the above FOR loop to change their properties...

  Like this:

  

• Want 5530: want to scan from the front panel of the printer computer

  Hello

  I am not able to use the scan to computer function from the front panel of the printer to a PC recently updated.

  On the front panel, I press 'Scan', then 'computer '. The name of the computer to which I want to scan is listed, so I select it. The scan preview screen appears then I press 'analysis '. After a standby display told me that the computer does not have to check the cable, etc...

  The PC is turned on, and the connected user.

  Printer is connected directly to the PC via USB cable.

  PC operating system is Windows 64-bit 10.

  Printer is 5530 want all-in-one.

  HP Print and Scan Doctor no problem.

  I tried with a disabled firewall.

  I uninstalled and reinstalled several times (using a new download of HP).

  When I open the printer software 'manage the scan' is not listed (only the Scan item is 'search for a Document or a picture", that works).

  Test page will print from PC.

  Another PC (running Windows 8.1, connected via a network) seems to work.

  Any suggestions?

  Hello

  Thank you for using the HP Forums.  You can try this:

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1 uninstall the software from your computer

  Try this program to uninstall Microsoft

  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...

  2. download and save the software COMPLETE features (do not install online)

  The following resources will help you:

  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  3. install the FULL feature software "saved".

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  If you are installing via a USB connection, connect the USB cable only when prompted by the software.

  Let us know if it works!