Open administrator cannot open any programs unless you run as administrator.

Similar Questions

• Unable to run any programs after you run disk defrag in Windows 7

  I have a similar problem... after running the regular disk cleanup and defrag disk I can't open any program files.  I get the following messages: no such interface supported or just programs does not open.  When I go to the restoration of the system, the error message says System Restore does not start .

  I have a Best Buy webroot antivirus protection.  I ran a scan of disk and all sectors are OK.  I'm trying to do a full restore of the computer of origin because of all the installed programs and this is the only option in safe mode.  I have a Sony Vaio - Windows 7.

  Anyway is access to the rollback feature by bypassing the control panel?

  Thank you.

  Hello Colonel,

  Thanks for posting on the Microsoft answers Forum.

  Click here for an article on the removal of Webroot Antivirus. There is not a separate for Windows 7, so I follow that for Windows Vista.
  You can download Windows Security Essentials for a free antivirus if necessary. Click to download Windows Security Essentials.
  If this does not help, click here to contact Webroot for support.

  I hope this helps.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot open .exe files, cannot open any programs

  My computer worked fine until last night. Now, every time that I click on a shortcut, or try to open any program, I get this error: this file does not have a program associated with it for performing this action. Create an association in the set Associations control panel.  OR I get this message: the version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher.

  I got this computer for 2 years, with the same programs on it (of course they have been updated since then) and never had a problem. I can't even run a virus scan or anything to know if I have a. What is going on?

  Hello

  Next message will be how to restore functions .exe, once you are clean.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The two albums allow scanners to run or get remote AV.exe removal.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.exe (or something different than now), then
  Double-click it and run it like this. You can rename it back later. Do the same with others
  programs as needed. Use this method for other necessary - DO NOT ASSUMER one
  program removes all or that there is no other malware.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  This malware has many names - some of them are (they all AV.exe in common).
  
  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove malware AV.exe = read all instructions.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform:

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I ordered the creative cloud Sunday and received a number control but still cannot open any programs. When I check the status of my order online, he says that he can't find it. Is this normal after 3 days?

  I ordered the creative cloud Sunday and received a number control but still cannot open any programs. When I check the status of my order online, he says that he can't find it. Is this normal after 3 days? I tried to ask in a chat instead of the forum window, but no one answered and after 10 minutes, my screen restarted and closed window cat. It seems a bit frustrating not knowing what happened to my order and not being able to communicate with anyone. This habit with Adobe or are they just of technical problems this week?

  Your subscription to cloud appears on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• 'C:windows\system\run1132.exe' when you try to open any program.

  C:windows\system\run1132.exe

  I try to open any program on my pc and all I get is

  C:windows\system\run1132.exe

  Hi kennyken,

  It seems that it is a virus infection.

  ·         Which antivirus program is installed on the computer >?

  You can run the Microsoft to check security scanner for any infection by virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

• Computer froze cannot open any programs or even to use the Start button to turn off.

  Original title: the computer froze.

  Original title: my computer (Windows XP) has frozen. -Big problem -)

  Hello

  Last night, I used my computer to open a load of bunch of programs of MS Access (probably asked to run a marathon when he can only walk!)

  Now, I can't open any programs or even to use the Start button to turn off. How can I fix this problem or you have lost everything :-(

  Thank you

  Thanks - all of a sudden he started working again! Maybe this was a vacation - but I tried F8 and safe option is not come to the top.

  Very old computer - but it is useful to use to return to historical documents that I don't want on my new computer.

  Tnanks for the long and dedicated response :-)

• Cannot open any programs in windows Vista

  My office could not open any programs that normally opens in wondows for awhile now, the strange thing is that different programs with a runtime environment open well as Wings 3D but programs such as Explorer or itunes just show in the Manager of tasks like running, but I don't see it on my desktop. I try to activate the rollit back system restore but I can actually the program because I never actually see the window, backup and Retore Center shows just like a blank white box but never fills.

  Hi Geoffrey Starr.

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer before this problem?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Difficulty of broken desktop shortcuts and common system maintenance tasks
  

  Method 2: Run the fixit available in the article below and check if that makes a difference

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows

  Method 3: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• With computer freezes in 15 seconds, or as soon as you open any program it freezes instantly

  Original title: computer freezing

  With computer freezes in 15 seconds, or as soon as you open any program it freezes instantly. Changes prior to problem change brother printers and the addition of camera, log in to view the cameras

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• Downloaded the trial version of Acrobat DC. Now cannot open any program acrobat. I get the error message when needed to connect: connect to the internet and try again. Computer is out of connection or your computer's clock is out of adjustment

  Downloaded the trial version of Acrobat DC. Now cannot open any program acrobat. I get the error message when needed to connect: connect to the internet and try again. Computer is out of connection or your computer's clock is out of adjustment

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Mylenium

• I can't open any programs or shortcuts on my desktop. When trying to open them they come up some sort of computer language.

  Cannot open programs
  
  

  I have the Paessler tool and it shows that my system works.  I also ran a Mcafee scan mode without failure, and he said as I have no virus or

  spyware on my computer.  I use Windows XP Professional.  I can't open any programs or shortcuts on my desktop.  Then try opening
  them they have developed a kind of computer language.  Any help I can get would be great

  Hi Laurent HUH,.

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can run the Microsoft Fixit in the following article and check if the problem persists.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   

  Method 2: I suggest that scan you SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  a. click Start, click run, type cmd in the Open box and then click OK.

  b. at the command prompt, type sfc/scannow, and then press ENTER.

  Note: Could you prompt to insert the Windows XP CD.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information, you can consult the following article:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747/en-us

  Let us know if that helps.

• Processor gets 100 if I open any program, constant at 80-90% use always.

  Ulitmate VISTA 32, dual core 2.6.
  4 GB of ram, 100 GB

  Processor gets 100 if I open any program, constant at 80-90% use always.

  2twice formatting, re-installed, reinstalled all the drivers and windows update.

  no sharing, no network or usb drive connected.

  Ty.
  dpak4u@Hotmail

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  Update BIOS, drivers and control software (if any).

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• My XP computer will not open any program or website without asking "open with", tried restoring the system

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/my-computer-will-not-open-any-program-or-website/420df6df-8cf3-48e6-810b-a00c3fd04c69

  I have the same problem and when I click on system restore I am invited again to choose a program to open it with... now what?

  I have the same problem and when I click on system restore I am invited again to choose a program to open it with... now what?

  the windows system restore feature is a very important system.

  and if it is defective or failed in some way, then this may be a sign that your whole system could be damaged or unstable.

  what you can try is execution of the system via safe mode restore.

  If this does not work yet, so the next step is to move your personal files, documents, photos and send boxes out of the system because the following methods that will help restore your system can put your personal files safe.

  so after trying safe mode stage and or copy your personal files from the system, we can take the next steps.

  Incidentally, if your computer came pre-installed with windows, or you halographic disc of microsoft for the operating system?

• When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load.

  Original title: Please HELP

  When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load. Safe mode works, but I just don't know what to do. Help, please

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Since it works fine in safe mode, I suggest you to try to perform the clean boot to safe mode and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Also, try to run the safe mode System File Checker and check if it helps:
  http://support.Microsoft.com/kb/929833

  Method 3:

  Be sure to run a full scan with your antivirus software.

  http://www.Microsoft.com/security/default.aspx

  It will be useful.

• When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program.

  When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program. What should I do? Please help me. Thank you

  Hi TaiNguyen95,

  ·         Have updates you installed?

  ·         What is the full error message?

  Follow the steps provided by Keith from the link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• I can't open any .exe (including regedit.exe) file - if I try to open any program, I gives me an error that the application is not found.

  I can not open all .exe files, including regedit.exe cited as a means to correct this type of error.  If I try to open any program gives me an error that there are no application or the 'Open with' window opens asking me to choose my program.  However, I can open the Word Document, although if I try to click on any shortcut to Microsoft Word it says application is not found.

  I had a virus on my PC and used Malwarebytes to remove it.  The deletion was successful, but he seems to have created this new problem.  I don't know if it is directly related to the kidnapping, or whether the virus changed anything while he was active?

  Thanks for your help.  :)

  Your ".exe" file association is probably damaged.
  To fix it, follow the instructions on this page for the attachment of .exe file associations.  Be sure to read the note at the top of the page specifically about the special considerations to fix .exe associations.

  'Windows XP file Association problems'
    <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW