open files are not detected when the research network file sharing

Similar Questions

• Recently opened progams are not displayed on the start menu

  Original title: my most recently opened PROGRAMS are not displayed n the Start Menu-Vista ultimate__

  Hello, Im under Vista Ultimate SP2 [32 bit] and what ever updates etc, there is so much current im.  Suddenly the list on the left side of the Start Menu [under the waiting list] shows all the programs that have been recently opened/used. It allows to view, obviously Ive done something along the way but don't can't seem to retrace my steps back far enough. Clicks to memorize and display properties are all not verified so no problem there.  Can someone please help with this annoying problem. May thanks, has soon.

  Type regedit in the start search. Access
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  and delete
  NoStartMenuMFUprogramsList
   
  --
  ..
  --
  "kenhankanen" wrote in message news: c0fac7b4-ec95-4c3b-8345-eb202323410c...
  > Bindu thanks for your reply, but I had tried these steps much earlier on
  > and are the most obvious that can be made. I was expecting something
  > more technical, if necessary, as perhaps a reg key has been changed and can
  > be reset but I am sure that is it might have been, or if in fact it is
  > the cause. I'm sure its base [other Quen exhibited obvious steps]
  [> above], but can't seem to find it in one of the preferences or
  > configuration in the control panel settings. other than furthere ideas
  > create a new user account?
  >
  > Thanks again for your time and help.
  >
   
   

• Inspiron 1525 integrated webcam not detected when the laptop is open, but works when it is closed

  I see that the webcam works (blue light is on I can open less then to halfway and see the desktop and a part of the computer in photo. then open more than half and get error webcam not detected.)

  Help please

  Hello

  Check with Dell technical support, online documentation and drivers and their known forums
  problems and solutions.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  -------------------------

  Help generic camera:

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• inter esxi host ipv6 multicast traffic are not detected by the destination VM

  Hello

  Warning, I do not have in-depth knowledge of vmware, so please excuse the bad wording, misconception and ignorance in the post below.

  The current topology is:

  

  Each esxi 4.1 update 3 (DL380 G8) host is to connect both layer 2 switch.

  on each host, the vswitch has two network cards configured as active/active, with the default NIC cluster approach (route based on the original virtual port code).

  Everything else is default.

  The switches are connected by a link to trunk (not bunk)

  I have two Windows Server 2008 R2 VM in the same subnet and you have enabled ipv6 on them (by default)

  When two virtual machines are on the same physical host, ping-6 destination_ipv6_address works (I just use the link local address)

  When two virtual machines are on different hosts, ping fails with the "destination unreachable" message, which usually means the neighbor discovery process fails (similar to arp in ipv4 where source VM cannot get mac address of the destination virtual machine)

  When two virtual machines are on the same physical host, the the packet capture shows that Neighbor Solicitation message is sent via an ipv6 multicast address

  When they are not on the same physical hosts, packet capture on the VM shows that the destination virtual machine will ever get the destination ipv6 multicast packets.

  I then connect two DL380 G8 in a similar way to the switches and install windows Server2008 R2 directly without virtualization on them and ping-6 works perfectly.

  My questions are:

  -I missed somewhere, a configuration to allow ipv6 multicast to work? Or even to remove any 'logic' and treat it simply as a show?

  On network switches, you can do this by disabling IGMP who will then deal with multicast as broadcast packets.

  Although I can't find a similar setting under esxi anywhere.

  -J' saw an option "Enable ipv6" on esxi, but I guess it's only useful if the host itself to participate in ipv6 and therefore not applicable to my case?

  The only similar question I found the research is on the link below, which suggest to hardcode the next table on virtual machines, which is not ideal.

  I can confirm however, hard coding the table nearby on two virtual machines to work. This problem seems to be on how esxi vswitches manage ipv6 multicast traffic

  ESX4 and multicast

  Ideas, points of view are very appreciated

  Ed

  I don't know if this will really solve your problem, but it is worth trying to update the firmware of the NETWORK adapter and the driver.

  Looks like it's a HP NC 331FLR NIC (gen8 DL by default NETWORK 4 ports with the BCM5719 chip card).

  There is no binary updates that you can run from the 4.1, but you can update all the components of the firmware with the current Service Pack HP for Proliant image:

  HP Service Pack for ProLiant

  Or start the server in a live Linux of your choice and use the Linux binary update:

  http://www.HP.com/swpublishing/MTX-ec0e18db6a8e4d978b57aa95d1

  These will update the NIC 331FLR to the Boot Code version 1.37/NCSI 1.2.37.

  Then update the tg3 driver in ESXi with this set to 3.129d.v40.1 offline:

  https://my.VMware.com/group/VMware/details?downloadGroup=DT-ESXI4X-Broadcom-TG3-3129DV401&ProductID=136

  You need the file bundle offline (BCM - tg3 - 3.129d.v40.1 - offline_bundle - 1033618.zip) in this package. You can import in the vCenter update manager for easier deployment or install it (probably) ESXi shell with esxupdate--bundle=/tmp/BCM-tg3-3.129d.v40.1-offline_bundle-1033618.zip

  I'm a little rusty in the Department of ESXi 4.1 CLI however, you may need to use the vihostupdate utility or with PowerCLI Install-VMHostPatch remote:

  https://pubs.VMware.com/vSphere-4-ESX-vCenter/index.jsp?topic=/com.VMware.vSphere.upgrade.doc_41/esx_upgrade/patches_updates/t_host_upgrade_using_vihostupdate_esxi.html

• Spider sometimes works ok, sometimes in the rendering mode.__sleep and hibernation software are not available when the software rendering mode is running

  I have an ASUS K501N laptop.running 7 Home premium.

  Sometimes when I turn on it the office/display is not so strong, if I click on Spider I get a flag your who says run the game in software rendering mode hardware acceleration is disabled or not supported by your video card driver happens whensleep and Hibernate options are not available.

  Other times that everything works correctly.

  Anyone know why and how to remedy

  Hi leflaneur,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. when there is no sleep and hibernate options available?

  4. are you able to play other games on the computer?

  Method 1

  I suggest that you enable the acceleration of the display on the computer and check if the game works.

  (a) open settings display by clicking the Start button, clicking Control Panel, appearance and personalization, customization, and then clicking display settings.

  (b) click on display settings, and then click Advanced settings.

  (c) click the Troubleshooting tab, and then click change settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) move Hardware Acceleration complete.

  Method 2

  If the previous step fails, then you will need to download and install the drivers for the graphics cards updates by visiting the card manufacturer's Web site and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Record of control of projects and costs are not visible when the project is created manually or copy model or another project

  
  Hi all

  If I create the project using business process 'Request for project' and when we opened the project, we can see "Project delivery" and "Cost control" mode records.

  But when I create project directly in the workspace of society (Admin mode) > company sponsored Shell > project, either by directly or copy model or another project.

  We are not able to see above two folders in user mode.

  I had checked to access control, there are access avalible for all project users to the two folder in user mode.

  Help, please.

  The project administrator mode.

  Implement > BPs

  Add in your Bps and enable and configure workflow settings.

  Glad that the other worked ok now.

  I hope this helps.

• Satellite - 14G - L855 devices are not detected in the Device Manager

  I reinstalled my Satellite L855/L855D (installed windows 7 instead of win 8). And there's a problem: many features is not found, like ethernet / wireless. Also found Radeon HD 7670 M video card. I can't install the drivers, the apears to errors that my hardware is not appropriate with the software (e.g., chipset). On the toshiba Web site, I typed the serial number of my satellite, but my computer is not found. What wrong with this laptop?

  Same problem here: [http://www.tomshardware.co.uk/forum/386506-33-devices-detected-device-manager-format-win7]

  What should I do? I tried many drivers but no one works. Please, give me advice. Thank you.

  Toshiba Satellite L855 - 14G (Toshiba EUROPE GMBH)
  Part. N ° PSKFWE-00H00FG3
  Intel(r) 3210 M i5
  AMD Radeon HD M 7670
  4 GB RAM DDR3
  Windows 7 Ultimate 64 bit

  Hello

  I ve checked the download from Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and all the Win7 64-bit drivers are available.
  Have you tried to install all the drivers, tools and utilities from there?

• Power HP Pavilion g7-1310us ca not detected when the battery is installed.

  OS: Windows 7 64-bit Ultimate.

  When AC and battery power available, the laptop wants to run on battery. Test the battery with AC plugged ends upward with a message similar to "the battery is OK, but the test did not complete because AC is not plugged.

  When the battery is removed, the laptop works fine on AC.

  Unplugged AC and battery, power button that is held for a minute, reconnected battery and HQ - the problem persists. Tried removing / reinstalling compatible Microsoft ACPI control method battery driver - did not help either.

  The laptop runs all the BIOS the most recent and the software updates that have been available through HP software support support.

  Center of Service HP solved the problem by replacing the AC adapter

• Not available when the connection network connectivity

  I have a strange problem with a windows XP on my network system.

  I am running Windows XP SP3 with the latest patches and it is joined to a domain.

  When I start the computer I have not access to the network for about 3 minutes.  Loads of Windows and I am able to put in my credentials, but the connection does not occur until the network components start to work.  I am also unable to ping the computer so that during this time.  I've updated the network drivers and which don't is not improved with anything whatsoever.  I also ran SFC by any chance, he had a problem with the Windows files.

  If anyone has any advice I would appreciate.

  Thank you

  Hello
   
  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Windows XP Technet Forums.
  Here is the link:

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

  I hope this helps.

• SWF files are not displayed when the Web page is published to the web

  I was given 5 swf files to add to a Web page. I insert > media > swf and added each swf along the left side of the page. I can read the files when I saw in firefox, ie, chrome, etc. I copied then all the videos, Scripts files and html on the remote server file. When I go to the update page, the page is displayed correctly except for 5 swf files. The page is located here: http://coeh.berkeley.edu/pehsu/VideosC.html.  I use Adobe Dreamweaver CS6. Any help will be appreciated.

  It seems to give the same strange message "the server cannot find the file specified" on any .swf. If you change a the .swf .jpg file, you get the standard message on the server 404 File not found.

  Try to place one of your .swf files in the same folder as your index.html page. Then navigate to it directly http://coeh.berkeley.edu/pehsu/oscar4.swf

  for example and see what happens.

  I wonder if it is not something your server administrator might help you here.

• G20: Are not lit when the Mode2 selection in Bios

  Hello
  I bought the computer 1 month ago or not, and I've just realized that it is not possible to activate all the LEDs on the front at the same time. When I got the laptop it has light buttons firs 2 (TV and music), but there is no light at all in the rest (read, file,...). I just checked the manual and it is explained that our model has 2 options: All off (Mode 1 in the Bios) and everything works (Mode 2). I thought it was normal because when I press one of these keys, it lights correctly.
  Your qosmio has all 11 LED with light in Mode2? If not, what is your problem? and what you think of the behavior of my friends? Any idea about how much time would it take something like that if I have to use the warranty?

  Another thing is that according to my manual, the front control panel is disabled by default; but mine came with it enabled, with the battery installed and quite broken box. They told me that it has never been used, but I'm not really sure now. Your computer came with the Control Panel before disabled?

  Thank you very much for all the advice!

  Hello

  As I know it is not possible to make them ON at the same time. The visual cue appears JUST at the moment you press the button. On this way, the user can see that the button is on.

  I don t see the meaning if they are all the TIME.

• Smart guides are not displayed when the image resizing while now shift

  When I resize an image that is next to another image and I want to make both the same height smart guides will not appear until I'm holding on shift key (to keep the aspect ratio). If I let go shift guides work without problem but then my image starts to deform. As soon as I press SHIFT the guide goes...

  Is this a bug? Is it possible to fix this?

  [Moved from all Adobe lounge to a specific support by product - MOD forum]

  As I wrote this seems to be the way of all versions of Photoshop that has a guide to chip works.  I don't think it's a bug.  You can try to report it as a bug or request a change on the site of Adobe's Photoshop family feedback.

• Some files in my USB SanDisk 16 GB USB key are not detected and when I connect to another PC, all files are detected

  Original title: some files in my USB are not detected and the rest of the files show find when I connect to my pc, when I connect to another pc the files seems to find.

  Hello world

  I have a SanDisk USB 16 G with important files, when I connect to my pc windows 7, some files are discovered, I am able to read other files show as empty files and my pc don't its not able to open them.

  When I connect the same USB for my lap top with windows 8 all the files where to find and I can open with a problem.

  Can some body please help me solve this problem?

  Hi Martin,

  This problem can be caused if the program for the particular file could not be installed on your computer.

  1. What is the file format or the extension of the files that you do not read or recognize in Windows 7?

  2. what exactly happens when you try to open empty files?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  You need to check the files that are not open in Windows 7 and trying to install the software for files that are not opening and control.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Satellite L755D - Web cam/mic are not detected by Skype

  Good evening everyone,

  I just noticed that when I install and open Skype, my built-in webcam and microphone are not detected by the application. He has worked in the past, but I've not had to use Skype for more than a year, so never noticed until now.

  I checked the Device Manager and there is no webcam or microphone listed. I tried to search for new hardware, but it found nothing.

  Specifications of systems:

  OS: Windows 8.1 Pro
  Processor: AMD A8 - 3500M
  Memory: 8 GB of RAM (2 x 4 GB Kingston sticks)
  HARD drive: 750 GB Seagate Barracuda
  The version of the BIOS: Insyde Corp. 2.10 (28/06/2012)

  If any other info is needed to help diagnose and solve this problem, then please ask and I will provide.

  Thank you very much

  Michael

  I guess the laptop not was not preinstalled with Win 8.1 but updated you the Win 7 system to Win 8.1.
  Is this correct?

  I m application because it would be interesting to know if the webcam worked correctly using Win 7.
  The driver for the webcam using Win 7 to be installed to get the webcam recognised.

  To help to win 8.1 additional webcam driver is not necessary because it s already part of the Win 8.1 System. That is why the webcam should appear in the Device Manager without installation of the webcam driver.

  However, some models of laptop supports additional webcam POWER setting in the BIOS.
  Please check this option in the BIOS.

• Satellite M30x + Win7: DVD not detected by the CD/DVD drive

  Hello

  I use a M30x since 2004 with its CD/DVD drive * a S mat. DVD-RAM UJ-831
  When I was with Windows XP, I have never had problems to read or write on CD, CD - R, DVD, DVD - R or DVD - RW. But recently I installed windows seven, and since that day the drive won't recognize the DVD. I can still read and burn CDs and CD - R. I'm burning the same Virgin DVD-+ R/RW as before, but the drive won't detect them. Those I have already burn are not detected or the other.
  My computer says that the CD/DVD drive work properly and drivers are up to date.
  I tried to clean the lens, but nothing has changed. And I tried to reinstall the drivers, but I could not found for windows seven.

  Thanks for the help.

  Hello

  Have you tried to delete the upper and lower registry Filters >
  Pleas check it!
  http://support.Microsoft.com/kb/270008/en-us

  You will find the registry key where filters must be removed.