open my computer, I get this error message:

Error loading c:\windows\KBDMPT.dill

could not be found. Please tell me what it means, so that this computer is restored in good shape, but this message has begun to show months later, I've spent

Error loading c:\windows\KBDMPT.dill

I think this should be KBDNPT.dll and it's a Trojan horse. Download the free version of this tool and do a Full Scan.

Malwarebytes Anti-Malware
http://Malwarebytes.org/

Tags: Windows

Similar Questions

  • When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

    When I start my computer, I get this error message:

    Windows cannot open this file: GLBD4EA.tmp

    To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

    What do you do?

    -Use the web service to find the appropriate program
    -Select a program from a list of installed programs

    No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

    Please help :)

    Hello

     
    Perform the following steps to remove the file from the registry.
    a: type regedit into the search box start and click on enter.
    b: Search now to the following key
    HLKM\SOFTWARE\Microsoft\windows\currentversion\run
     
    then delete the following key
    53E412B3-9907-4F9E-A6DC-D0106D1D72C
     
    Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
    However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
     
    Hope this information helps.
  • When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

    original title: log question.

    When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

    Hi KERRYYX,

    1. Did you the latest changes on the computer?
    2. When was the last time it was working fine?
    3. You have security software installed on the computer?
    4. What is the full error message that you receive?
    5. Are you able to restart and shut down the computer?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    You cannot log off, restart or shut down your Windows XP-based computer

    http://support.Microsoft.com/kb/831431

  • I get this error message every time I try to open Outlook Express: your server unexpectedly terminated the connection.

    I get this error message whenever I try to open Outlook Express:
    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465, secure (SSL): Yes, error number: 0x800CCC0F

    How can I solve this?

    original title: Outlook Express error

    Does OE open at all, or you get this error after opening?

    Check your mail at Yahoo.com and see which messages are still on the server that you have not received. The first online can be very large and cannot be downloaded. If you find such a message, read it and delete it online.

    In addition, you must disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

    Why you don't need your anti-virus to scan your email
    http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

    Note that for many AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.  You will probably have to do it.

  • After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

    After the connection to my computer today and to go to Youtube, I get this error message on my screen.

    The assertion failed!

    Program:...
    File: common\npn_gate.ccp
    Online: 267

    Expression: pPluginShim

    I try to press abandonment and try again but nothing happen.

    Hi Shadwik,

    Thanks for the reply.
    I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
    After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
    After that my PC works fine.

  • Problem with rename folders in Windows 7: get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. »

    When I try to rename a folder in Windows 7 I get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. "Can anyone help?

    I gave up and solved the problem by buying a third party software to use as a directory, Directory Opus.  It is much more functional than the Microsoft Directory and I have never problem renaming of files.  I am just amazed that so many people have this problem and Microsoft has not fixed.

  • I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation.

    I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation. I did it

    Hello

    Please see error: 'Please install Adobe installation using Setup.exe' when you install non-English versions of Adobe Creative Suite 3

    Hope that helps!

    Kind regards

    Sheena

  • I try to install CC and get this error message: "another version of office of creative cloud or an installer Adobe is running. To continue, please close these first instances. "But there are NO other open instances

    I try to install CC and get this error message: "another version of office of creative cloud or an installer Adobe is running. To continue, please close these first instances. "But there are NO other open instances

    Hello

    Please try to close the services mentioned below from the Task Manager:

    Kind regards

    Sheena

  • I get this error message: Code 80070663

    I get this error message: Code 80070663 and it seems that there is no solution for it to what tells me the support. Please give me a process step by step in order to fix this problem please!

    Step by step this path below that can help you to correct the error.

    Click on the "Start" button, type "Windows Explorer" in the search box.
    Click on the "Windows Explorer" in the "Programs" menu
    Navigate to the path "c:/users/Allusers/Microsoft/Office/data", find "opa12.dat" file and rename it to "opa12old.dat".
    When you restart Windows Office and open a file, it prompts you to turn on the Windows desktop, then activate it online.
    Reinstall the updates from the Windows desktop, and then restart the computer.

    This solution of error on this site:
     http://www.regmender.com/how-to-fix-Windows-Update-error-80070663.html
    Hope it can help you. Good luck.

  • I am trying to download items 9 to a new computer and get an error message that says: "the archive file Elements 9 is missing.

    I am trying to download items 9 to a new computer and get an error message that says: "the archive file Elements 9 is missing" how to fix this?

    as well, you need the 7z and the exe.  put them both in the same directory and double-click on the exe file.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

    window using the Lightroom 3 link to see these "important Instructions".

  • Whenever I open my computer I get the following message is displayed as a pop-up on the desktop: C:\PROGRAMA~2 Kodak\EasyShareSetup\$Regis~1\Registration_7.2.20.2.stx

    Whenever I open my computer I get the following message is displayed as a pop-up on the desktop: C:\PROGRAMA~2 Kodak\EasyShareSetup\$Regis~1\Registration_7.2.20.2.stx I don't have Kodak on my computer and I typed Kodak in the search above Start section and checked my programs.

    How do I get this off of my computer?  Any suggestions appreciated woul

    I typed Kodak in search above to start section and checked my programs.

    Instead do with msinfo32.exe to open system information.   Then, in the Environment\Startup software do a find, category searches only for Kodak

    Even better would be to use AutoRuns (utility system available on TechNet).

    HTH

    Robert Aldwinckle
    ---

  • When I start my computer I get an error message about V protect Application on the Windows XP-based computer

    When I start my computer, I get an error message, "V Protect Application has encountered a problem and needs to close".

    System information Utility version 1.0.0.1

    OS version: Microsoft Windows XP Home Edition, Service Pack 3, 32-bit

    Processor: Intel (r) Celeron (r) CPU clocked at 2.66 GHz, x 86 Family 15 Model 4 Stepping 1

    Number of processors: 1

    RAM: 1 GB

    Graphics card: RADEON 9250, 128 MB

    Hard disks: C: Total - 76316 MB, free - 47785 MB; KC: total - Mo 305168, Free - Mo 304760;

    Motherboard: MICRO-STAR INTERNATIONAL CO., LTD, P4M266-8233,

    Antivirus: AVG Free Antivirus, update: Yes, On-Demand Scanner: enabled

    I run the above system and would appreciate any help with the removal of this message as if I don't send it to Microsoft, it goes.

    Thank you

    Roy.

    You can try those Microsoft committed the 'experts' ideas Support Engineer (1, 2, 3) for safe, clean boot Mode, Online Scanner, but I think that most of the people who know how XP would recognize that there is no component 'V protect' in Windows XP and a simple search Google reveals that your problem is with your AVG software and has nothing to do with Windows XP.

    You should look in their forums (like me) and here's what they suggest:

    Vprotect belongs to AVG Security Toolbar.
    Please try to run repair installation using the latest installation package.

    If the problem persists, please follow all the steps in the instructions to complete reinstallation .

    I think that if I were you, I would follow the instructions on the page AVG to uninstall and reinstall your AVG because there may be other parts of AVG who are afflicted that you have not yet discovered, but in AVG, some people with V forums protect problems find that AVG repair install works.

  • Every day I get this error message and send it to Microsoft. 32\svhost.exe C:\Systems32/Drivers\c30a67ae1d5f4bd4.sys AND C:\Windows\system

    Every day I get this error message and send it to Microsoft.  32\svhost.exe C:\Systems32/Drivers\c30a67ae1d5f4bd4.sys AND C:\Windows\system

    Also: Microsoft called me about a report of my computer.  My daughter thought it was a hoax and hung up.  Is there a way I can connect with this Department once again?

    Microsoft does not automatically contact you if you send details of error for them.  They use these reports to see what types of questions are trending and those that are trending upwards looked at herself.  The rest cannot.

    And your daughter has been very wise - the call she received WAS a scam and she did well to cling to their topic.  Microsoft never call you unless you call them first, and they tell you that they will call back.

  • When I start my computer, I get and Error Message (InfoCenter.exe - Application error)

    When I start my computer, I get and Error Message (InfoCenter.exe - Application error) that someone knows what this means and why I make it?

    Hello

    Follow these steps and check if that helps:

    Method 1:
    Start the computer in safe mode and check if the same error occurs:
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Method 2:
    I suggest you try to perform the clean boot and check if it helps:
    http://support.Microsoft.com/kb/310353

    NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

    Check if that helps.

  • As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

    Original title: Rundll error help

    As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.

Maybe you are looking for

  • Portege M205-S809-PXE-E61 Media Test failure PXE - M0F error

    I replaced (what I thought was) a HD on my Portege M205-S809 failure (I was getting the error "PXE - E61 Media Test failure PXE - M0F").I put in the HD and turned on the laptop to get the same error. My intention was to reistall the BONES of the reco

  • Unable to connect on the web site or web mail

    Hi all, my main site named: www.amolmap.com/ and several days I can log my site and my webmail.amolmap.com and need help and support.

  • CS3 Design Premium download to new computer

    Hi all!  Trying to download my last CS3 on my new Macbook Pro and it gives me the following:"Setup" cannot be opened because it comes from a developer that is unidentified.Your security preferences allowing installation of only the applications from

  • Pause and resume playback to selected poin

    Hello, is it possible / shortcut / preference you can hit to get the video you're editing from the point you selected?For example, I click to 1' and 32 ' and press the space bar. The video starts to play 1 ' and 32 "and I hit the SPACEBAR again and t

  • Mutiple remove virtual computer in Virtual Center 5.1?

    Does anyone know how to remove several virtual machines both in the virtual Center 5.1?Looking for an easier way rather than a virtual computer to both research and removing one at a time.I did a LOT of research with ZERO success.