Open my laptop, now it does not start
Hi everyone, the first time poster.
I opened my laptop (touchsmart tm2 1070ca) to attempt to clean the keyboard and now it does not start at the top. all the LEDs light up, but the caps lock LED flashes. The fans and hard drive look about 2 seconds before silence, and about 10 seconds later, the laptop beeps loud and then stops.
When I opened upward, the touchpad is detached from the motherboard. I finally get it reconnected, but it turned out to be very difficult.
I tried the Bios recovery suggested on the support site, but it had no effect.
any help would be massively appreciated. no no not my laptop will really make my life difficult.
I know this is an old thread but since there was no solution, I felt should display what has worked for me, in case someone else has this problem.
This morning my computer refuses to start and the caps lock blinked. I've read elsewhere that a user of a model different from simply removed HP sound CD ROM and re-inserted. My laptop is a HP tm2 Tablet PC, so it doesn't have a removable CD ROM, but I was wondering if another device had become "loose". First, I removed the dongle USB for my mouse and battery and then restarted. That did not help so I forced a stop down (press the power switch.) Then, I opened the background panels and reinstall the RAM (actually happened two sticks to make sure) and removed and re-inserted the HD then restarted again. I don't know which of these factors did the trick, but it worked.
Hope someone finds this useful info.
G.
Tags: Notebooks
Similar Questions
-
Adding 2nd NIC (pci express gigabit) to DC7700p. Now, it does not start. Can not pass boot F9 or F10 Setup Menu. Or the boot or installation menu is accessible. Any ideas?
Hello:
The PCIe slot on a dc7700 usable only for a PCIe video card. If you want or need to add an additional NETWORK card, you need to add a PCI NIC.
Paul
-
My laptop fell and does not start
Hello! My compaq presario cq56 bowed down and now won't start. I opened it and checked everything. Hars battery, memory disks. I have replaced everything but nothing. I checked the mem, battery and the drive on my second laptop and it worked. When I connect to the AC, the indicator light is on, but when I push the power button, it does NOTHING. What should I check?
Unfortunately, it will have to be disassembled and inspected if it is does not start due to a fight with gravity.
Warranty does not cover damage inducer owner, even if inadvertently.
You could try to remove the hard drive and then see if the laptop responds to the power button. If the motherboard is OK, the BIOS must meet in showing an error message that says it found no bootable disk (or operating system) found. A fall can make a hard drive unusable.
-
Laptop computer G60 does not start
I'm having some trouble starting by G60 Notebook. The system runs Windows 7, but since it does not start I don't know if the system is a 32-bit or a 64-bit. What seems to be the case, it's that he's trying to start and simply itself turns off. For this, this little trick after having tried to boot Windows "normally". I ran the diagnostic tests for memory and disk and both indicate that memory and disk are in agreement.
I now get a cannot find the BOOTMGR. I tried to recover the BOOTMGR using the recovery partiion, but what I will meet with the first issue of the computer itself put it off before it can perform the restore. I do not have the disks for the OS, so if it's the secret I have to order a set.
Your help is appreciated.
Hi @LarryN
Thank you for your request, I will do my best to help you.
I understand when you try to start Windows normally, it turns off automatically. You were able to test the hard drive and memory and all the two passed.
Here is a link to an overheating and Auto Shutdown Troubleshooting questions that can help.
Here's another if this isn't the issue. Troubleshooting of Error Messages on a Blue Screen may occur at the start or start
You can also try booting in safe mode. Enter SafeMode (Windows 7)
Select repair your computer.
If the problem still persists repeat the process above, but select Safe mode with command prompt and follow the instructions to open the system recovery options.
Again choose command line
Enter the following information to the /rebuildbcd bootrec command prompt and press ENTER.
Once this completed successfully try to start Windows normally.
If you still have a question I suggest make a recovery in the factory
Performing a recovery of system HP (Windows 7)
While the recovery, there is an option to backup your personal files to avoid data loss. If you do not already have one, now is a great time.
Restore files that have been supported to the top using HP Recovery Manager (Windows 7)
At any time you can contact HP support for assistance.
Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.
Good luck!
-
HP ENVY 15-uo11dx: did a reset and now it does not start
I did a reset system where I chose to erase all mt files and apps. Now, he ends up with the spinning thing and does not start. I can get info from the bios with the F2 key and updated and then restored to the bios and nothing.
Well I thought about it myself by pressing the F11 key several times and following the menu there. Thanks to this HP online
-
Computer laptop Windows XP does not start.
My laptop does not start. When I first put it on the screen says 'we apologize... ". Windows does not start automatically in... "Then the Windows XP screen as it tries to load there is this small blue screen that appears a second microphone, too fast to read, then goes back to 'we apologize...". "screen just keeps looping. I thought that my hard drive was going badly, so I ordered a new. I have XP SP3. Could someone help me please?
Hi robestes3,
1. When did you start to question?
2. you remember to make changes to the computer before this problem?
Method 1:
First of all, you can tryLast good known Configuration and check if helps solve the problem.
Check out the link:
How to start your computer by using last good known Windows XP Configuration
http://support.Microsoft.com/kb/307852
Method 2:
Step 1:
If the above method does not work, then you can try to start in safe mode and check if the problem occurs.
Check out the link for more information on starting your computer in SafeMode below:
http://support.Microsoft.com/kb/315222
Step 2:
If you can boot into safe mode without any problem, and then try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
http://support.Microsoft.com/kb/310353
If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source:
In addition, after you resolve the problem, see the section on how to restore your computer to a Normal startup mode.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Installed Defender pro 15-1 software anti-virus and now Windows does not start.
Original title: can't get to start-up computor!
I have a Toshiba laptop that won't not start when turned on. I have a windows vista 32 bit operating system. I recently purchased Defender pro 15-1 the anti-virus software and installed on the pc. After installation I tried to restart the pc, it would not pull up windows and it flashes just microsoft icon. I have tried F12 to restart to set the default values always nothing. What can I do to my pc?
Hello
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 6.x and 4.8 x
Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.I hope this helps.
-
I put norton on my pc and now it does not start
I put norton on my pc and when I start the pc, the sign of the window appears but the pc does not start then. I think I have more than a secruity of the internet on the pc. I was told to start in safe mode and remove all of the programs, I have, but still have the same problem. Can anyone help please.
Since then, you can start safe mode, run a restore of the system to a point just before the installation of Norton if possible.
-
Hi, I have recently updated my laptop to Windows 10. He had so many problems and I didn't like it at all, so I just returned my laptop to Windows 8.1. Since then, my laptop does not correctly every time, and the fan immediately starts to work as well. I can start my pc and connect to my home screen each time. If the tile is moving or light up when I move my cursor, then I know that I can use my laptop for a little while. It can freeze after getting out a good program. Other times when I start my laptop, everything is dead except for logging on my screen. My Windows key on the keyboard does not work most of the time. If the screen does not respond the first time I turn, as described above, I can't absolutely nothing on my pc. I can't access the search bar by moving the cursor to top right, I can't open the tiles, I can't spend in desktop mode, etc. Front I upgraded to Windows 10 and downgraded to 8.1 all worked perfectly, because I've updated from 8.0 to 8.1 Windows almost 2 years. I have a defective battery. in fact I can only use my laptop if it is plugged. My fan is constantly going, but I don't know if it's my loss of battery or what's wrong with my pc now. I have described my problem in the Microsoft community forum but have had little response that was not helpful. I was told to go to the command prompt and put in DISM: scan now (which also contained letters more than that, but I do not remember all). I followed the instructions and for 2 days, my pc seems to do better. Then he returned to this problem again. I hope you can help me. If you have additional questions, post here or please email me at [removed personal information]. Thank you!
DEBHello and thanks for the display on the HP support forum. What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.
If this fails to solve the problem. The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.
Thanks again for posting and have a great day.
-
Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed
My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.Help will be less appreciated.
Thank youThe same question again?
Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.
-
Update of Firefox does not, so I re-installed. Now firefox does not start at all?
Yes firefox, I started one morning, and I saw that it has been updated. After waiting, the notification saying "firefox is updated" crashed so I had to shut it down. When I started firefox again, he stated that the update failed, but less than a second after that notification skipped upward, it crashed also. He continued doing this, so I followed some instructions on the internet, re-installed firefox (without deleting the data of a personal nature), but now, firefox won't start at all!
Now what?
Unfortunately, I never submitted before incident reports, so the folder does not exist in my computer
But the good news is that I tried running in windows safe mode, and it worked, then after returning to normal windows, it did not work. After waiting a while, now it works again, so I guess this can be considered resolved now
-
Liquid fell on my Satellite M30x - now it does not start
Hey there,
yesterday, some orange juice fell on the side of my toshiba M30X laptop.
Immediately, he came out. I manipulated the laptop carefully, she held so that some of the juice could go out again, then I tried to dry near the heating.Now: there's a light running, when I try to put it, but after 5 seconds it turns off again.
So is there anything I can do? Is is useful to try to get their hands on the hard drive?I know it was my mistake with the juice, but I would be very thankfal for each tip that you can give me!
Thank you very much
KurtSomething like that happened to my girlfriend some time ago.
She spilled a coke and the closed laptop.
It was not possible to turn on the laptop. I have noticed the same behavior.
The LED was on but the laptop didn't start up.Finally, laptop technician found one of the memory modules was defective because of the liquid in the Bank of memory.
After the replacement of the laptop starts fine.
Maybe my story might be useful for you!
-
I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death. with the details of error like:
Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.
I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode. I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.
Help!
Thank you.
So yes actually hear nothing helped me. Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD. Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive. After doing this, I was able to do a boot repair, who led for the BSOD. Not sure how that actually fixed, lost about 10 hours of my day. So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.
I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.
Problem is solved, had to go back to a previous version of good boot where I have not install updates again. Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.
Nice day.
Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:
-
Then I tried to start Windows normally or in Mode safe and it does not work.
None of these advanced startup options work effectively.
When I turn on the laptop, the VAIO large appears and then Microsoft corporation and then a quick start of blue, then it tries to restart again again and again until I hit F8.
I hope this can be repaired. Thanks in advance for anyones help.
Hello
as none of the advanced startup options does work, try this:
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
-
Interrupted for laptop - Windows 7 does not start
M6 computer - laptop - HP pavilion
Operating system - Windows Home Premium
Unfortunately I dropped this computer from a height of 4 feet after closing it.
Since their start-up is not possible.
I started the "the option computer repair"-it seems to start but then hangs indefinitely.
Al the other options safe mode, safe mode with networking, etc., including "start windows normally" do not start and all back to 'Repair your computer' which still once blocks indefinitely.
I tried to get the recovery option by turning on the computer by pressing F12 repeatly before the windows logo appears.
The system recovery words appear, but I again picked option 'Repair your computer' which once again blocks indefinitely.
Advice please - the situation seems hopeless. ?
Concerning
Flynne
______________________________________________________________________________________________________
Thank you for your quick response.
I managed to get the option of recovery has begun and now my computer works well.
I ran a disk check and all sectors appear to be intact.
I'm very lucky to get away with this.
I have discovered that my computer is equipped with a device that limits or prevents damage to the hard drive.
Thank you for your interest.
Concerning
EFLYNN
_______________________________________________________________________
Maybe you are looking for
-
Remote control loses connection several times
Remote control repeatedly goes off line and then throughout the programs. We loaded so that we can check the list of probable causes. It has become a source of irritation when you're immersed in a movie and that appears on the screen. Any fixes or
-
To change the location of the Bookmarks button
I've upgraded to Firefox 10, and the Bookmarks button is now completely over to the right. I hate it here! It was better when it was centered on the toolbar - a small scroll up and I was there. Now I have to scroll right to click the path. Is it poss
-
You can convert a voice file to a text file
I used before Vista speech recognition capabilities, however, I recently bought a digital recorder and the system will only allow me to download the file. Is there a way to convert the voice file downloaded in a text file?
-
This is the message I get after I downloaded a program on the net. I can't install it. I have a laptop Samsung 3 year. Intel core i5. Help, please.
-
Printer Photo Scanner problem - HP Photosmart Premium C309g-m:.
My internet connection was closed by a small problem in my McAfee virus protection. I've now got my computer is working again, but have tried to analyze a picture to my computer, but receive message: Scan problem, try to start the scan of the compute