Open ports on the AirPort Extreme 7.7.7

Similar Questions

• Failure of the Airport Extreme and Airport Express

  Airport Extreme not to talk to the device POE from the antenna of radio after a thunderstorm (lightning).  Plug the POE ethernet cable directly into Mac works.  Airport Express lights.  Airport Extreme appears, but there is no internet connection.  A port can be fried on the Airport Extreme?

  Yes, but unfortunately the port that will blow is that ethernet is plugged.

  If it's WAN then you do not have a way to use the airport as a router... only a bridge device.

• The airPort Extreme (2007) and Time Machine

  Hi all

  I read the info "how to ask a good question" and apparently you need details. I'll try and be concise but informative with my problem. It has been a long journey to get to where I am, but hopefully, with a little help from this amazing community, I can get to my destination.

  Task

  To produce a backup solution Time Machine for the family spending as little money as possible and using the BRIC and broc, I already have.

  Equipment available

  I have a House with some ethernet cables for most rooms that through switches to allow a variety of, most entertainment devices to communicate. It is:

  1 x NAS/Media (ReadyNAS Duo v2) server,

  2 x TV (Samsung),

  2 x TEU (Beyonwiz),

  2 x Apple TV (a 2 nd generation the other is the latest version)

  2 x DVD players,

  1 x iMac.

  2 x 8-port switches,

  1 x 16 switch ports,

  1 x AirPort Extreme (2007).

  1 x Airport Express (age unknown but older than the extreme)

  1 x Fritz! Box 7490 Modem/Router

  Courses in place

  All the associated TV stuff are connected in 2 rooms through ethernet via switch 2 x 8 ports switch 16 central port and then to the Fritz! modem/router box.

  There are also all the usual WiFi going on with mobile phones, iPads and laptops.

  Remarkably, it seems just to work!

  However, I want to add some backup data on our computers. I tried to do by using the ReadyNAS as it is supposed to support Time Machine, but I can't it to appear as a backup destination. So, I thought, as I have AirPort Extreme, I add it to the network and attach a USB HDD for Time Machine since it is supposed to be easy. However, I've been home for hours and cannot make the HARD disk appear in system preferences/Time Machine.

  I plugged the Airport Extreme in one of the switches 8 port said to create a wireless network with the same details as the Fritz! The box according to another article of the support (Airport Extreme wired AND expand network - need of entry). Airport utility shows me Wi-wired connections and seems to work.

  I look at the AirPort Extreme disks tab and can see the attached USB drive here. However, it does not appear as a choice of drives available for backup in Time Machine preferences. I tried 2 different discs with the same result.

  The Question (finally)

  How can I get Time Machine preferences to show the USB disk attached to AirPort Extreme as a valid choice for backups? If anyone can give me a little help in the right direction, I would be very grateful.

  Thank you for reading this,

  Grant

  Unfortunately, the key here is that the version of AirPort Extreme you have does not officially support Time Machine backups on a drive to the USB port of the device.

  The only version of the AirPort Extreme, which will officially support Time Machine backups on a drive in the USB port on the airport is the 802.11ac current version that looks like a "tower". Older versions of 'flat and square' of the AirPort Extreme don't support Time machine with a USB drive attached.

  To check, please see "Time Machine in charge of USB drives" in this Apple support document... AirPort base stations: discs on USB - Support Apple

  Support for time Machine to USB drives

  OS X Time Machine supports compatible USB drives encrypted, related to the time Capsule (802.11n and 802.11ac) AirPort and AirPort Extreme (802.11ac).

  Given that the average life of most wireless routers lasts about 5 years, and your AirPort Extreme seems to be about 9, your AirPort Extreme did very well for you... much better than the average. It might be time to start thinking about a replacement who will be responsible for backups Time Machine... either a time Capsule (i.e. an AirPort Extreme with a built-in hard drive) or another AirPort Extreme.

• What to do if the reset button does not work on the Airport extreme a1408 w / Password lost?

  What to do if will not work the Reset button on Airport Extreme a1408? The password is lost (bought used). I spent several hours trying every method I could find anywhere on how to reset; soft, hard and default. Airport utility doesn't let me do anything without the previous owner password. I can't get him.

  Can anyone help?

  At this point, your only hope is to open the AirPort Extreme to try to repair the reset button... If possible. This link provides some tips on the process to open the unit.

  https://www.iFixit.com/device/Apple_Airport_Extreme_Model_A1408

  Honestly, it isn't easy, unless you're a guy real DIY, you can buy an A1408 used on Amazon for about $35-40.

• Why is my slower than wifi ethernet download speed when using the airport extreme?

  Hi all

  This is my first post here, so please bear with me. I currently own stunted 2011 Macbook Pro 13 inch and an extreme A1521 from the airport. My ISP has promised 50Mbps downloading and sending 10 Mbps. When I connect my MPro via ethernet/wi-fi to my modem I get as promised. When I connect my MPro via wi - fi to the extreme I get 48Mbps download download 9Mbps and it's ok. However, when I connect my MPro via ethernet to extreme I get 8-9Mbps download and 9Mbps. Anyone know how to fix this?

  If you check the 'fine print', your ISP has promised "up to" 50 Mbit/s and 'up to' 10Mbps.  The ISP might provide more than that during periods of slow activity, like the days of the week during the day, but much less during evenings when there are many more users on the Internet.

  When I connect my MPro via ethernet/wi-fi to my modem I get as promised

  I assume that you meant to check the Ethernet connection, you disable WiFi on Mac when you do this. And unplug the Ethernet cable when you check the speed of the WiFi, correct?

  If so, this tells you that the Ethernet port to both the modem and the Mac work properly, and WiFi work correctly as well.

  When I connect my MPro via wi - fi to the extreme I get 48Mbps download download 9Mbps and it's ok.

  If this tells you that the Ethernet connection between the modem and the AirPort Extreme works correctly, and wireless works fine on the AirPort Extreme.

  However, when I connect my MPro via ethernet to extreme I get 8-9Mbps download and 9Mbps.

  Well, you know that the Ethernet connection between the modem and AirPort Extreme works because you can register 48 Mbps Wireless.

  Thus, the possibilities are narrowed to two elements at this stage:

  (1) the Ethernet cable is defective or making intermittent contact. Try another Ethernet cable, to ensure.

  (2) If you have turned off AirPort Extreme and rebooted several times, and you know that the cable between the Mac and AirPort Extreme works properly, then you have reduced the question down to the Ethernet on the AirPort Extreme, which is probably defective switch.

  If you have not already done so, try other ports Ethernet on the AirPort Extreme.

  As a last resort, perform a reset material on AirPort Extreme and put up again. To perform the Hard Reset... power on AirPort Extreme for a few minutes, then hold it pushed in the reset button on the back of the unit (near the AC power plug) for 7-8 seconds and release. Allow a minute for the AirPort Extreme restart orange light flashing slow.

  I once went through two consecutive airport extremes with the same question about 8 months ago, so it can happen.

  If you're still having problems, then it is time to take the AirPort Extreme of Apple Store... If you have one near you... or contact the Apple Support directly by clicking on 'Contact the Support' in the upper right area of this web page.

  Good luck!

• the Airport extreme, passing the spam of the printer

  I get the impressions of regular spam on my printer connected to my Airport Extreme wireless.  Is there a way to externally control access to my printer?

  HP LaserJet 1320 <-Apple Airport Extreme <-Motorola Surfboard cable modem <-Comcast

  By default, all incoming ports on the airport base stations are closed. This printer is connected to the extreme by Ethernet or USB?

  If by USB, there is at least, a setting you can check using AirPort Utility, as follows:

  • Run the AirPort Utility.
  • Select the extreme and then, select change.
  • Click on the Printers tab.
  • Clear (uncheck) the option "share printers over the Internet using Hello."
  • Select Update and allow the base station restart.

  

• Airport utility: green points on the AirPort Extreme &amp; Internet; Mini Mac does not connect to the internet.

  Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

  The airport connects using DHCP in Bridge Mode

  The router address is 192.168.80.1

  Address IPv4 is 192.168.80.2

  DNS server is the same as the router, but grayed out

  Mac Mini IPv4 Address is 192.168.80.3

  IPv6 automatically configures

  Also updated the firmware of the airport; no change.

  ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

  Any ideas to fix?

  Thank you.

  Post edited by: en maschera

  but my my Mac mini does not connect to the internet.

  The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

  Hello

  Network preferences may be damaged.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

  Then open AirPort Utility located in HD > Applications > Utilitiies

  Make sure that both Internet and Extreme are green.

  

• The Airport Extreme has download slow unless its an apple product

  I need help.  I have an Airport Extreme router.  I run a HP all in one office, two smart TV, Wii and two boxes on my router.  Not all work at the same time, nor do two pass at the same time.

  I check my router on Mac speed: 100 Mbit/s easy.  I check my iphone: 100 Mbps.  I checked the HP desktop computer: 30-50 Mbps.  I haven't checked the Wii, Smart TVs do not open always Netflix, my boxes go slow and buffer for long periods of time.

  There must be a setting that does not allow non-Apple products to run more slowly.  I pay 100 Mbps and expect to receive 100 Mbps on the Airport Extreme for all products, not just Apple products.

  What I could try or have I missed that should be done so all non-Apple products get the speed of download and Apple products?

  I called support and they had me change the channels in the configuration of the Airport Extreme wireless.  That did not help.  I changed them back and now the iPhone runs slower, below 50 Mbps upload when you fill out a speed test on www.speedtest.com.  I'm sitting in the same place.  It makes no sense at all.

• Where can I find the Airport extreme N model number?

  Where can I find the Airport extreme N model number?

  It seems that the 3, 4, 5 are all Ns.

  I wish that my laptop wireless backup. A friend has his 5 AE do this via the usb port that is connected to a powered hub.

  Thanks for any advice.

  ett2 wrote:

  Where can I find the Airport extreme N model number?

  It seems that the 3, 4, 5 are all Ns.

  That's kind of how count you...

  But if your AE running 7.6.4 firmware it is Wireless N...

  A look at the base of the number. It is on the first line of molded rubber or paper label. A1408 is Gen5.

  I wish that my laptop wireless backup. A friend has his 5 AE do this via the usb port that is connected to a powered hub.

  Now for a piece of info you don't want to know.

  http://pondini.org/TM/airport.html

  Apple does not support the time machine is a model AE before last Gen6. A lot of people use it, but it can be unreliable... people have a different experience. Just to note that it is not taken in charge and reliability might be good bad or anywhere between the two... Ask yourself how useful is a backup that is not reliable.

• Time Capsule will not extend the Airport Extreme network

  My airport extreme (do not know what version... can't even find it in the system report) offers a WiFi modem. I have a Time Capsule 4 G which extends the network. This works well for a few years now. Suddenly, the CAP began flashing yellow. Time capsule said Airport utility cannot extend the network and I should make sure the password is correct, that it is in the signal of a network, etc. I went through the settings of the time capsule by ensuring that passwords are correct. It is certainly within the range of the signal of the airport extreme (they are both in the same place as always... Besides, I put my iPhone next to the time capsule and I get a signal strong). I tried a hard reset of the time capsule. Of course, this does not work.

  Time Capsule seems to be communicating with the computer very well. I can access it via the Airport utility and reboot. I can access the data on its disk backup. Airport Extreme is to give a signal of good wi - fi connection. I'm still able to pick it up with my computer (even if my computer is far more than the time capsule).

  Someone has an idea of what's going on?

  Given that the Capsule does not correctly connect unless everything is OK with the AirPort Extreme... I suggest that you turn off the time Capsule for now and check that everything works correctly on the AirPort Extreme.

  My airport extreme (do not know what version... can't even find it in the system report)

  You say that the AirPort Extreme does not appear when you open AirPort Utility?

  If so, press and hold the option on your Mac key while you double-click on the image of the AirPort Extreme.

  Model of the AirPort Extreme, you will appear at the top of the summary page. What is it?

  Near the bottom of the summary page, check to see if there is a parameter that is displayed for the State.  If there is, what is the message next to status?

• The Airport Extreme 2 to died (light orange) 5 years

  A few days ago my MacBook pro let me know he could ' t locate the time capsule and hand't stored in more than a week.  I checked the other computers in the House, I discovered that they were all not finding time capsule not more.  When I checked the device the light was green, and all machines were connected to the wifi signal that he died.  I unplugged the Airport Extreme and gave him a minute or two and it reconnected.  I never heard the spin drive up so I guess the hard drive should have failed a few weeks ago.  After power cycling the light remains orange solid, and wifi no longer works.  Airport utility will not find the device.

  My questions are:

  Why if the wifi work until it's the power to bike after the hard drive failed?  The fact that the wifi does not work now shows that I should just trash and get a new one?

  Should I just install a new hard drive, if so where can I get the disk image format?

  Thank you for reading this!

  Why if the wifi work until it's the power to bike after the hard drive failed?  The fact that the wifi does not work now shows that I should just trash and get a new one?

  It worked because the TC was functional, even if the hard drive was not... If you open airport utility you should have seen a hard drive error, but he might have ignored, so... in fact the main light must have been orange flashing not green.

  The TC is designed to test the hard drive when starting... If it fails the TC does not start.

  You will have an indicators of solid orange color which is hard drive failure.

  If you open the TC you can replace the drive. See https://www.ifixit.com/Device/Apple_Time_Capsule

  Should I just install a new hard drive, if so where can I get the disk image format?

  Once you install the disk simply go to the tab of disc airport utility and erase the drive... which will set it up properly.

  One thing to consider is the economy... a TC 5 years really may not be worth a repair... power supplies can also go wrong.

  If it's a Gen3 and when you open it is brand Delta power, then it might be interesting to replace the drive... a Gen4 usually also would be worthwhile. Disk 4 Gen is WD green... and he might have lost format rather that died... you could so be able to simply delete it.

  Tell me the A1xxx of the base model and I can help you understand what to do... I've fixed hundreds of them.

• Cannot set the Airport Extreme to extend the existing network

  Network WiFi of my holiday home is provided by the router from my ISP (Time Warner). I have an Airport Extreme, which used to be configured to provide the WiFi network to another well, and I would use it to extend the existing on the TWC router network.

  I had a lot of trouble to do a factory reset on the Airport Extreme, but I'm sure I managed (by turning on with the pressed reset button) after several attempts. At least the extreme doesn't show signs of the old network, he has provided.

  When I try to set it up in the Airport utility, he wants only to create a new network. If I click on 'Other Options' and select 'Add to an existing network', the next screen is titled "This Airport Extreme will create a network" and prompts to enter a new network name and password. (Specifying the name of the network current generates an error because the network already exists, as I expect for the creation of a new network.)

  Any ideas on how to tweak this Airport Extreme by extending a network?

  TIA,

  Doug

  P.S. I have reviewed plugging extreme in one of the TWC router EtherNet ports and create its own WiFi network (with the advantage of adding support for 5 GHz), but the last time I tried I lost all connectivity; I'm afraid that the ISP network might protect against too broad network, although the glitch may have been a coincidence. If anyone has experience/ideas on this alternative configuration, I might be willing to try again.

  AirPort Extreme would not be able to connect using a wireless connection and to extend the wireless network of the ISP, but if you can connect the AirPort Extreme to the ISP using a permanent router, wired Ethernet cable, then AirPort Extreme could be used to provide broader coverage of wireless in this way signal.

• Xfinity X 1 modem/router is compatible with the Airport Extreme? How it should be configured to maintain my wireless network?

  I got a modem Comcast/Xfinity upgrade. Xfinity X 1 modem/router is compatible with the Airport Extreme? How it should be configured to maintain my wireless network?

  Whenever you change the modem or modem/router on a network, AirPort Extreme will be reset to the default settings and then set it up again to work properly with the new modem. For this he would be...

  Turn on AirPort Extreme for a few minutes... If it is not already turned on

  Hold in the reset button on the back of the AirPort Extreme for 7-8 seconds, then release it.

  Allow a minute for the AirPort Extreme restart to a slow, flashing amber light status

  Make sure that an Ethernet cable connects to one of the four LAN <-->Ethernet ports on the modem/router on port WAN "O" on AirPort Extreme

  To start the Setup program, click the WiFi icon at the top of the screen on your Mac and are looking for a list of the new AirPort base station

  Just below that, click directly on the AirPort Extreme and then follow the prompts for configuration "Wizard".

  When you configure AirPort Extreme once again, you can use the same wireless network name and the same password that you used with AirPort Extreme with the 'old' modem, if you wish, or use a new wireless network name and password

• The Airport Extreme WiFi intermittent 2nd generation

  I'm having a weird problem with loss of WiFi on my Apple Airport Extreme.

  My 2nd generation that apple Airport Extreme Base Station began to close its WiFi broad signal several times.  It happens usually after 60 minutes or less works very well.  Power on and the new runs for awhile until it stops again the WiFi.  Green light normally forward either static rest without flickering to indicate data transfer, or it will just dark.  Sometimes it will turn off WiFi and then restart WiFi a few minutes later and appear to be good.  But mostly it just stops and I can, he extinguished/turned on to operate correctly with the WiFi again.

  Airport Extreme is connected by ethernet cable to my modem/router main fiber (which is a different floor home) and it is set to "Bridge" Mode  It worked without any problems and I did no changes to my system.  My ISP did update my modem broadband fiber a few weeks ago to a "Virgin Media Hub 3.0"I understand was made by Compal.»  It seems to work perfectly and I have no problems with speed download or reliability in wireframe.  I was away from home for about a week and was able to access my wireless IP camera remotely via my Airport Extreme with no problems.  The problem started almost immediately on my return, but, as I said, I did no changes to my network.  I have never had this kind of problem before with my Airport Extreme.

  I am running OS X Yosemite on an iMac that is connected by a cable ethernet to the Airport Extreme and seems to work very well even when WiFi is de-energized on the Airport Extreme.  Airport utility reports the airport as current firmware version 7.6.7.

  I used network utility, Fing, and it showed that my Airport Extreme has multiple IP addresses, which seem to conflict with the IP address for my three AppleTV.  I manually changed the IP addresses of the Apple TV to another IP address not conflicting, but Fing always shows that my Airport Extreme has three IP addresses and I still have the problem of WiFi.

  Any other suggestions on a probable cause of this problem or the best way to solve the problem would be much appreciated.

  Thank you!

  The question is the 2nd generation AE is now too old.

  I would say the power supply (external or internal) is dying.

  It service life is approximately 5 years... your must be 8 years old. so the solution is simple... buy a new one... or I'll tell... Newish...

• How to reset the airport extreme to factory default

  My Airport & time capsule are not connected to the modem, saying no dns server is available, however the modem works when connected to the computer. (Macbook) After hours of troubleshooting, I would just restore default settings and see if I can get it going again. Can anyone provide info on restoring the default settings?

  Thank you!

  • Turning off AirPort Extreme for a minute or two
  • In the reset button on the back of the AirPort Extreme first... and keep taking them for 7 to 8 seconds... while simultaneously you reconnect the power on the AirPort Extreme.  (This step is a bit complicated for most users, because it takes almost 3 hands to do it properly)
  • Release the reset button to zero after the period of detention and allow a minute for the AirPort Extreme back on the way to a slow, flashing amber light status

  AirPort Extreme is now back to the State it was when you took it first out of the box.