Open tabs which unused for a few minutes is no longer working and make me lose the page on what it is.

Similar Questions

• Re: Satellite A300-1MS - after a few minutes DNS no longer works

  Hello

  I have a Satellite A300-1 ms with Windows Vista Home Premium SP2. What happens is that after a few minutes, surfing the web, I can't navigate more unless I restart the PC. It happened with SP1, SP2, IE7, IE8 and Firefox. The only service that stop working suddenly is browsing when "http://dns_domain" is entered in the Solution Explorer. These other services running ok:
  -Skype
  -updated windows
  -update anti-virus
  -http://xxx.xxx.xxx.xxx (using IP instead of domain)
  -nslookup, so the connection to the dns server seems to be ok
  -ping to the router

  The only solution is to restart the PC (turn on/off the network interface or reboot the router does not resolve the issue)
  This happens with the help of wi - fi and wired LAN

  Does anyone have a clue on what could happen and how to solve?
  Thank you very much for reading this post!

  Hello

  Sounds like the system service domain name (DNS) stopped working after a few minutes. Please check the Services (start > run > services.msc) if the DNS client is always started. Also, try to restart this service. It work?

  What antivirus software or security is installed? Try to update and disable the software just to test.

  Sorry, but that's all I can say at the moment.

• When I select the 'file' menu InDesign crashes for a few minutes. Before he did it just started the program, always maintaining it.

  InDesign DC update 2015 2015, 1-build 11.1.0.122. (ugrade18 September 2015)

  When I select the 'file' menu InDesign crashes

  for a few minutes.

  Before he did it just started the program, always maintaining it.

  Qualquno had the same problem?

  How do solve you?

  Open preferences and in the file management section, set the number of recent files to display to 0.

• When I open a web page any using firefox, its ok for a few minutes, then he opens another page saying it is redirected for no reason at all

  When I open a web page any using firefox, its ok for a few minutes, then he opens another page saying it is redirected for no reason at all, the homepage remains open, but the other page start for no reason at all in another tab

  It's very consistent, he arrives a few minutes? In this case, I suggest this test:

  To find out if one of your extensions is the culprit, could you test mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  Not all add-ons are disabled: Flash and other plugins still works

  After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

  Any difference?

• Just update 4 LR LR 6, so I find lightroom does not not like before.  He becomes very slow to open, when I go to 'Library' to 'Develop' or import of images the Apple beach ball will roll for a few minutes.  My iMac uses OS X worm

  Just updated LR 4-6, so I find lightroom does not not like before. LR 6 is very slow at the start, whenever I pass 'Library' to 'Develop' or import images, the Apple beach ball will roll for a few minutes first. My iMac uses OS X version 10.10.5 are all these compatibility issues?  What should I do to make it work better the lightroom?

  Please take a look at the article and follow: https://helpx.adobe.com/lightroom/kb/optimize-performance-lightroom.html

• Several applications have frozen or stopped working after connecting to the server for a few minutes

  Hi all

  I am facing the problem with my windows server 2012 R2. After I connect to the server and leave it there for a few minutes:

  • Some of system applications such as device, power, system, etc. Option Manager are stopped working. When I opened them, I have nothing.
  • All my applications c# (.Net Framework 3.5 ~ 4.5) was an error 'could not load file or assembly 'my_reference_libraries' or one of its dependencies. The system cannot find the specified file. ». I'm sure that's not the error I can run the application correctly before this problem occurred.
  • When I open "Manager configuration SQL Server 2014", I get the error "the instruction at 0x0023ae20 referenced memory at 0 x 00000058. The memory could not be read. »

  Strange thing is when this is the case, I can open "Event Viewer" and after opening, everything back to normal. I can open applications, including my c# programs without any error. It's not just my guess that I tried this work many times. Opening every time the "Event Viewer" has solved the problem. There may be other applications system who will be doing that job, too, but I have not tried everything.

  In case the Viewer, I got tons of errors for:

  • GroupPolicy - Group Policy processing failed. Windows could not apply the policy settings based on the register of the LocalGPO Group Policy object. Group Policy settings will not be solved until this event is resolved. View the event details for more information on the file name and path that caused the failure.
  • DistributedCOM - the server {06622D85-6856-4460-8DE1-A81921B41C4B} is not registered with DCOM within the required time.

  What could be the problem? My user session froze? I get trouble solving this for several weeks already and still got no chance.
  Any help would be greatly appreciated!

  Please advise!

  Thank you and best regards!

  Hello

  Any recently installed application? Examine the cpu and memory use?

  Let me you suggest reviewing your material, including memory. Added new hardware recently? A updated driver recently? Please update hardware drivers.

  The following forum might be more appropriate for your question:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• When I click on my documents or my pictures etc nothing happens for a few minutes, then get an error report.

  My documents will not be open. When I click on my documents or my pictures etc nothing happens for a few minutes then get an error report. I tried in safe mode and the same thing happened. Any ideas how to fix this or get my picture back please?

  If it is a recent development, try to perform a system restore to a time before your problem.  You may need to run from the command line as described in the following article:

  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"

  <>http://support.Microsoft.com/kb/304449 >

  HTH,

  JW

• When I go out for a few minutes, the screen shows my user name "Miriam", and it says "Locked"?

  When I leave my computer for a few minutes, I come back to find the Compaq screen with my user name in the middle and under my name is the word 'Locked ';  How can I get my computer to stay focused, if I'm going to serve me a cup of coffee or to answer the phone?   I would really appreciate your help!

  Hello

  Open windows control panel, open personalization, click on screen saver link at the bottom right and in the next window, uncheck the box next to "on the recovery, display the login page" then click on apply to save the changes.

  Kind regards

  DP - K

• Internet connection disconnects after that I let it idle for a few minutes

  I have Internet Explorer and Windows 7, and after I have let any inactive site for a few minutes, I have to enter my password once again as if I'm starting for the first time.  After I entered my password for windows, it goes immediately to the site I've been on previously.  It started about 4 months ago, and I have no idea what caused it.

  Hi Marquette.

  To provide the proper resolution, that I would need more information on your side.

  1. this problem occurs only while browsing Internet?

  2. did you of recent changes on the computer before this problem?

  I suggest you to change the screen saver settings and check if it helps.

  a. right-click anywhere on your Windows 7 Desktop and select Customize from the context menu.

  b. in the customization window that opens, click on the screensaver icon in the lower right corner.

  c. in the screen saver settings , uncheck the check box labeled in curriculum vitae, the logon screen.
  d. click apply and then click OK.

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• Every game I play works very well for a few minutes, then they lag a few minutes like clockwork. I ran each scan I can think and I can't find anything.

  original title: issues of computer game.

  Every game I play works very well for a few minutes, then they lag a few minutes like clockwork. I ran each scan I can think and I can't find anything. What I can do, how can I fix?

  Assuming that your PC meets the requirements of the games you try and works well when in Windows (not), then try this.

  1. Start the Task Manager goto the tab, click "Show processes from all users".
  2. Run the game in a maximized window, see if the game lags then.
  3. If so, go to the Task Manager and check the CPU usage and the memory usage by clicking on their respective column headers to get as high in the upper part. Is anything hogging resources?
  4. Double control by checking the graphics CPU and memory on the tab.

  or

  Try to run a scan with Malwarebytes - just in case. Download, install, update (right click and run as Admin to update) and then run a full SCAN. It can't find anything either, but it does not take long and helps eliminate the possibility of malicious programs.

  or

  Are you drivers (esp GPU and sound card) to date?

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  Disable the iMessage?

• My internet connection is lost at home after a few minutes. I re - turn on the wifi disabled, ten and it works again for a few minutes and then repeats. It works fine everywhere else?

  Relatively new MacBook OSX El Cap 11.4

  My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.

• Satellite P30-110: the screen is blank, after working for a few minutes

  Hello.

  Can anyone adivse if they have encountered this problem before. After you start the system and worked on the laptop for a few minutes, the screen turns white as if the system is in standby mode. The only way to put it back on is by pressing the power button and everything continues normally until the problem reoccur.

  I have been informed that there may be a button faulty hibernation cela but surely you would say on the screen if the machine was going into hibernation with the usual calendar bar? And the fact that the screen turns back on as soon as you press the button shows his vigil no hibernation.

  Any adviser who can offer are welcome. If you need more information about the problem please let me know.

  Thank you very much

  Hi Paul,.

  If it is just the screen becomes black, but everything else seems to work fine, so I think that your FL inverter may be defective. This is the device that provides the lighting of the screen.

  I suggest that you only contact your nearest ASP for further diagnosis.

  Kind regards