Open the file in double Fail

Similar Questions

• CoreTelephony error in trace file as a file for coretelephony tracing operation has failed, perhaps you need more disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted

  I got this error:

  "CoreTelephony Trace file error
  A file for CoreTelephony tracing operation failed, you might run out of disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"

  I tried to solve it by searching for CoreTelephony errors. Could not resolve yet.
  Software does not, especially of photoshop...

  Any ideas?

  Same thing here, iMac with OS X 10.11.6. All started a couple days ago. Have not found any valid solution online yet, I tried rebooting in recovery mode and check disk, but it seems that everything is ok with the drives and permissions.

• System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

  Original title: svchost (1020)

  Event type: error
  Event source: ESENT
  Event category: general
  Event ID: 490
  Date: 2010-10-19
  Time: 14:51:34
  User: n/a
  Computer: ROB
  Description:
  Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi Robrw,

  1. when exactly you receive this error?

  2. don't you make changes to the computer before this problem?

  You can try to rename the catroot2 folder and check if it helps.

  Step 1:

  a. Click Start and in run type C:\windows\system32 and click ok

  b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

  If you are not able to do the normal mode, try to start in safe mode and rename

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

  See the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Step 3:

  You can also try to temporarily disable third-party security software and firewalls and check what is happening.

  Note: Activate the security software after the resolution of the problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows opens the files by a simple click rather than double, how can I change this?

  Window 7 file selection clicks

  Windows 7 opens a file with a single click when I don't want to do, I want to just select the file for possible copy or other activity.  How can I force to require a double-click to open the file as good old XP

  If your on simple click to open, what you have to do is (dot) in the file.

  Click to open, tap Select.

  If you want to change this setting go to your libraries you are interested in, click on organize in the upper left corner, and select the folders and search options, general tab, change to double click, save.

• 2% failed: ERROR: could not open the file %s

  I'm trying to convet system winnt in esx, always fail in the setp2. I tired to convet locally and remotely and get the same error message. Help, please

  10:32 step 1: connecting to Agent VMware Converter on 172.19.129.10

  10:32 step 2: creation of target virtual machine and the conversion of the data

  10:32:05 configuring settings for the virtual machine target...

  10:32:07 creating virtual machine target...

  10:33:04 ERROR: could not open the file %s

  The newspaper has been attached

  I already test the TCP 902 on the source by telnet to the target ESX machine and it seems that TCP 902 is open. The result of telnet has also been downloaded.

  Help, please!

  Problems with vConverter.

  StarWind Software R & D

• VMware Converter failed % 2: ERROR: could not open the file %s

  I'm trying to convet system winnt in esx, always fail in the setp2. I tired to convet locally and remotely and get the same error message. Help, please

  10:32 step 1: connecting to Agent VMware Converter on 172.19.129.10

  10:32 step 2: creation of target virtual machine and the conversion of the data

  10:32:05 configuring settings for the virtual machine target...

  10:32:07 creating virtual machine target...

  10:33:04 ERROR: could not open the file %s

  The newspaper has been attached

  This is the result of that port TCP 443 is blocked?

  Nope

  More likely, the system of the source (172.19.129.10) cannot reach the host ESX by DNS or TCP Port 902 is stuck between them.

  HA - nfc: / /------Corcus [storage2] / [email protected]:902

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• HR 2015 - failed to open the file of project RH - RH crashes

  I have a client who has problems with the RoboHelp 2015 project file. It seems that something has been corrupted.  I received the project files and the same thing happened on my laptop. Are there files I can delete which would help resolve this situation? Something like this happened to me a long time ago and I thought that I was able to remove one of the files and RoboHelp rebuilt the file when I reopened it. For the life of me I don't remember what it was. Here are the steps that I can reproduce again and again:

  1. launch RoboHelp

  2. click on file > open project

  3. navigate to the location of the project file
  4. Select HTML RoboHelp project file

  5 RoboHelp begins to open the file. The cursor will move in one loading, appear as it tries to load the files. But does nothing. Client left running for hours but nothing changes.

  

  6 then he appeared

  

  This thread offers to delete the file rhfontset.apj - HR must re-create the file when you open the project. It will be in the same folder as the cpd and xpj files.

  Errors when opening a HR project.

  Maybe rename it initially to see if it helps - if you have sets of police custom, you may have to re-create.

• Opening photoshop to double click on the file to open the app, but does not open the file.

  This is a new behavior... How can we solve it? Its very annoying!

  Shouldn't he open the file after loading photoshop?

  I think he should indeed.

  Have you tried the preferences of retirement yet?

• Windows 7 a vmdk file not found, cannot open the file '... Virtual Machines.localized/Windows 7.vmwarevm/Windows 7. VMDK

  Could not open the file ".../Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmdk:

  Help, please. I copied this over from a backup and it does not open. I joined the collection of support...

  Thank you very much!

  B

  it2webber wrote: could not open the file ".../Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmdk:

  Help, please. I copied this over from a backup and it does not open.

  How the Virtual Machine has been backed up and restored?  If Time Machine then...

  It is a known fact that Time Machine is not 100% reliable backing up/restoring VMS in all circumstances/conditions.  Also back up Virtual Machines via Time Machine of disk/time intensive and wastes a lot of space for something that may be corrupted and worthless time to restore it.  At least I would exclude the Virtual Machines with virtual machines and Time Machine shutdown, not suspended and VMware Fusion closed and then manually copy the VMS to another location, preferably on a different physical hard drive.  So keep the user data stored in the virtual machine saved out of the Virtual Machine on a regular basis in order to always have a backup of the current user data.  If you need to restore a properly saved by VM is not as common at least you will have a virtual working Machine and data user to go forward with when you find out your Time Machine backup of the virtual machine fails.  Also take a look at: best practices for backup of virtual machine (programs and data) in VMware Fusion (1013628)

  That said, if you don't have a copy of the file "Windows 7 - f004.vmdk" and then to try to retrieve the data from the user, you can try the following:

  Download then unzip it (double-click on) the joint "Windows_7 - f004.vmdk.zip" file that contains the file "Windows 7 - f004.vmdk ' an empty logical binary measure that has been created on the metric of the existing drive and add to the Package of the Virtual Machine.  This should allow the VHD to be considered as a virtual hard drive, assuming that there is no damage to the extent of the binary left headers.  Take a look on: work with Virtual Machine packages

  At this point, that the VHD has the scope necessary to show as a full disk, assuming that it is not corrupt the header in other binary extensions and can now attempt to access for the recovery of user data.

  There are several ways to try to retrieve user data.  The easy, although not necessarily work properly according to what now lack us due to replace the missing binary extensions with a logical empty measure, is trying to start the VM normally.  If the virtual machine starts up on the desk and VMware Tools load properly you should be able to copy your data to user off on a USB or slip and fall on the side of Mac or if you have a configured VMware folder then copy the files through it.

  Other methods involve starting the Virtual Machine with a Live OS ISO Image and copy files from a USB key or temporarily assemble the VHD to another Virtual Machine work.

  With the right tools installed the virtual hard disk could also be mounted as another accessible Volume through Finder.

• Problem with opening the files after the installation of creative cloud

  I am under creative cloud in Windows 7. Since the installation of CC when I double-click on a file icon the program opens but the file is not. I can only open the file on the file menu in the program. Very inconvenient. In addition, Acrobat now displays the error message randomly, "Acrobat failed to connect to a DDE server. Does anyone have a solution to these problems? Please notify.

  Hi Rhaydn,

  Test to see if you get the same behavior in a new user account with administrative rights. What types of files and programs were a double click when the application open but not the document? For the question of Acrobat, I found this thread

  http://forums.Adobe.com/thread/416414

  If this does not help, I recommend posting on this thread as well as anyone the problem.

  -Dave

• I can't open the files in the downloads menu

  Whenever I have download a file (open or save), it never automatically opens, and I can't open it by clicking on the entry in the downloads/Panel menu. I can't 'Open containing folder' and use the file normally from there, or go to the library and double-click on the file, but it's annoying that will not open the files I choose to open.

  I use Aurora, but the problem persists in the stable version of Firefox.

  Thanks for the suggestions.

  I considered my firefox reset (it would probably set it), but I was able to track the problem until mimetypes.rdf. I deleted it and now all is well.

  Solution: Remove mimetypes.rdf or reset (see this response)

• I can't open the files in the folder "my pictures."

  For the last two weeks, I was unable to open the files in the folder "my pictures." For example, if I save the photo in my pictures, it will not open if I double click on it.
  Someone at - it ideas?
  Thanks in advance.

  Hello Tim

  Is there a message if you want to open it? You can copy data to another folder in my photos and open them?

  You have this problem just with images or even other files?
  Give us more information.

• -Pop-up menu (allows you to choose what program you use to open the file) when you insert sim or cd does not appear

  When a disk or sim card or data storage device is connected to the computer there should be a menu pop up that allows you to choose which program to use to open the file. This is no longer the case. Any ideas how to restore it?

  Hi John,.

  1 are you referring to AutoPlay settings in Windows XP?

  2. did you of recent changes on the system?

  If you are referring to AutoPlay settings in Windows XP, you can see the following article in Windows XP to enable the feature.

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  You can also consult the following article:

  How to change or choose the program that starts when you double-click a file in Windows XP

• I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I'm probably not explaining my problem fairly - well, I scanned something in - I used Nuance Paperport.  I have it attached to an email and sent to six people - including myself.  I always open the attached file to make sure that the computer has sent the right thing.  When I tried to open the attachment I got the message "cannot open the file - I have already sent you."  I think that Norton Security got rid of the file I need.  I think I will contact them.  I tried to contact Nuance - but alas, my warranty has expired, so no help there unless I want to pay for it.  If I can't have the problem solved through Norton, I will contact you again.  Thank you very much for taking the time to try to help me.  Have a great Thanksgiving action!

  ================================================
  Your explanation was nice... that was my answer that failed.

  I was hoping that you would simply copy the scan of your temporary
  Internet files folder and paste it on your desktop. Then you might
  evaluate what is the problem. I thought that trying to open
  with such a long way email could be a problem. And also... it's possible
  be a file association problem. And it could be a matter of file size.

  I understand that you care why the attachment to the email
  failure and I think you need to find what is the problem with the scan
  before fastening will be successful.

• Shortcuts to programs, EXE files does not open (you will be asked which program I want to use to open the file)

  My system has developed a strange (and annoying) issue that no longer allows me to double click on the shortcuts of programs or EXE files.  When I do, I give myself a menu asks me what program I want to use to open the file, as if I was trying to open a file with an extension that is not associated with.

  The only way to get all the programs to run more is to right click on the shortcut and select "Run as Administrator".

  Right click on the shortcut also reveals a new 'momentum' (Yes, spelled with one S tiny) option in the menu.  I have not tried it works, in my view, it could be related to some false recently-removed security software that appeared out of nowhere last night.

  Any help to remedy this situation and get back to normal functionality would be greatly appreciated.  Thanks in advance.

  If program shortcuts are not no longer works, you will need to use a procedure special difficulty fo files .lnk (similar to the one used above with .exe files).

  Go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and select the .lnk and run it.  That should fix your shortcuts.  Or you can use the link provided above by Michael Murphy - it does essentially the same thing.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.