Open the ini file

Similar Questions

• After you open an ini file, I can put deny using the attribute denying access?

  I want to open an ini file and set its attribute access to any shares with another person. But when running.

  LabVIEW crash every time.  My environment is xp + labview8.5. Help me please check my Subvi.

  If labview does support not it, how can I set attribute to access ini file?

  Thank you very much.

  The output of open Config data is a refnum for the * data * in the file and not the file itself.

  You need open (open/create/replace file) instance of the file to generate a file refnum.

  

• RTE de LV cannot open the project files that include references .lvlib in dependencies

  I am writing a DLL LabVIEW to inspect the LabVIEW project files, and I noticed that if a project has a .lvlib reference in its dependencies, then the Run-Time Engine is contradictory on whether or not he can find the project file:

  • Project.Open returns error 7 (file not found)
  
  
  • Project.GetFileLVVersion is a success

  Here are some excerpts from my code of G and C engaged in this behavior:

  

     int openStatus = StatusSuccess;
  
     char * projectVersion = createStringWithLength (VersionStringLength);
  
  printf ("Analysis %s\n", pathchaine);
  
     OpenProject (pathchaine & openStatus, projectVersion, VersionStringLength);
  
     printf ("  project written in LabVIEW %s\n", projectVersion);
  If (openStatus is StatusSuccess)
  
     {
  
        printf ("  Open the project file.") \n") ;
  
     }
  
     on the other
  
     {
  
        printf("Error: could not find Project file, or file was not a Project file (Error code %i).\n», openStatus);")
  
     }

  However, when running in the development environment, the two methods are successful.

  Is this a bug, and if so, is it fixed in 2014 of LabVIEW?

  Here's how you can reproduce:

  Prerequisites:

  1. LabVIEW 2013 SP1 32-bit
  
  
  2. ConEmu for a good console- https://code.google.com/p/conemu-maximus5/wiki/Downloads
  
  
  3. minGW for compilation of a program to use the LabVIEW - http://sourceforge.net/projects/mingw/files DLL

  reference .lvlib to break dependencies Project.Open in LV RTE

  1. Open the attachment in a temporary directory (e.g. c:\xtra\temp)
  
  
  2. Open "OpenProject.lvproj" in LabVIEW.
  
  
  3. Build 'Open library project'.
  
  
  4. ConEmu with a bash command prompt, navigate to the temporary directory.
  
  
  5. Type make
  
  

  $ make
  
  patch the file "builds/platdefines.h.
  
  GCC - std = c99 g OpenProject.c o OpenProject.exe - lOpenProject - Lbuilds

  
  

  6. type "c:\xtra\temp\OpenProject.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProject.lvproj '.
  
  Analysis c:\xtra\temp\OpenProject.lvproj
  
    Project written in LabVIEW 13.0
  
    Open the project file.

  
  

  7. the opinion that both call nodes execute correctly.

  8. type "c:\xtra\temp\OpenProjectWithLvlibDep.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj '.
  
  Analysis c:\xtra\temp\OpenProjectWithLvlibDep.lvproj
  
    Project written in LabVIEW 13.0
  
  Error: Could not find the project file or file was not a project file (error code 7).

  
  

  9. notice that the node version managed while the open failure.

  10 type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj

  $ diff-u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
  
  -OpenProject.lvproj  kills Nov  4 11:28:28 2014
  
  +++ OpenProjectWithLvlibDep.lvproj      kills Nov  4 11:32:37 2014
  
  @@-13,7 + 13.11 @.
  
         true
  
         fake
  
         
  
  -      
  
  +      
  
  +          
  
  +              
  
  +          
  
  +      
  
         
  
            
  
               true

  Here's another way to trigger this behavior, which shows that LabVIEW occasionally Range the element dependencies:

  1. Open "OpenProject.lvproj" in LabVIEW.
  
  
• Add to the project a new VI and place the constant path of file "Application Directory" his block diagram.


• Select ""leader "Save All (this project)" and use the default name for the new VI.


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.


• Remove the "Application Directory" path of file constant


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Note that the problem has disappeared, as is expected.


• Add the "Application Directory" path of file constant in the block diagram.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice there is no problem, which is surprising, because that there should be a mistake because the dependencies item was not tidy.


• Close the new VI and pull out of the project.


• Select ""leader "Save All (this project)"


• Open "OpenProject.lvproj" in a text editor.


• Note that the dependencies item was put away.


• Add VI back to the project.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.

NInjaneer_wow wrote:

The same behavior occurs in LabVIEW RTE: a new project with a constant of the Application in an empty vi directory will return an error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.

I did experiment with workarounds for this problem, and I found a.

When I used to get the path of LabVIEW libdir in the ini of the executable file, execution is able to load and inspect the project file.

LIBDIR = 'C:\Program NIUninstaller Instruments\LabVIEW 2013'

While it is expected that a stand-alone executable can be placed on a system that does not have the LabVIEW IDE, it is still surprising to me that the execution engine cannot find standard library of LabVIEW without some explicit guidance. What other factors contribute to this behavior?

References:

• Configuration of LabVIEW files and paths- http://labviewwiki.org/LabVIEW_configuration_file/Paths

• Best practices for the .ini file, reading

  Hello LabViewers

  I have a pretty big application that uses a lot of communication material of various devices. I created an executable file, because the software runs on multiple sites. Some settings are currently hardcoded, others I put in a file .ini, such as the focus of the camera. The thought process was that this kind of parameters may vary from one place to another and can be defined by a user in the .ini file.

  I would now like to extend the application of the possibility of using two different versions of the device hardware key (an atomic Force Microscope). I think it makes sense to do so using two versions of the .ini file. I intend to create two different .ini files and a trained user there could still adjust settings, such as the focus of the camera, if necessary. The other settings, it can not touch. I also EMI to force the user to select an .ini to start the executable file using a dialog box file, unlike now where the ini (only) file is automatically read in. If no .ini file is specified, then the application would stop. This use of the .ini file has a meaning?

  My real question now solves on how to manage playback in the sector of .ini file. My estimate is that between 20-30 settings will be stored in the .ini file, I see two possibilities, but I don't know what the best choice or if im missing a third

  (1) (current solution) I created a vi in reading where I write all the .ini values to the global variables of the project. All other read only VI the value of global variables (no other writing) ommit competitive situations

  (2) I have pass the path to the .ini file in the subVIs and read the values in the .ini file if necessary. I can open them read-only.

  What is the best practice? What is more scalable? Advantages/disadvantages?

  Thank you very much

  1. I recommend just using a configuration file.  You have just a key to say what type of device is actually used.  This will make things easier on the user, because they will not have to keep selecting the right file.

  2. I use the globals.  There is no need to constantly open, get values and close a file when it is the same everywhere.  And since it's just a moment read at first, globals are perfect for this.

• Why can't I just copy a profile to another system in the directory profiles and modified the ini file

  My main system crashed. I have a copy of the profile. When I move a copy of the profile in the profiles folder and edit the ini file to use the new name, I get a message that there is an instance of thunderbird running and I need to shut it down. I don't see any instance of thunderbird anywhere in the Task Manager. It happens just for me the fact that I am also in firefox may be the cause of the problem to a running instance. I'm under V31.7.0

  I tried to simply move the mail directory in the existing profile. The thing is that I don't see the old messages. I can see all of the subfolders of the Inbox on the left but not messages in the right pain. I can see new messages, but it's all in the Inbox and not filtered to the subfolder.

  I tried to activate the function of multiple profile but that doesn't seem to work.

  MY BAD
  It seems that I had something that was bad in the profile. I got the profile from a backup and now Thunderbird works fine.

  Sorry that I missed the problem earlier.

• questions to open the .swf files

  At the opening of the .swf files I open or save as options. I tried all the fixes I could find nothing help. I even tried reinstalling the flash player program. I can read the files from the site, but after downloading, I can no longer read the files from my desktop without having to open it or save as options as it tries to re - download the same file. This repeats non-stop. I checked the options in tools but I can't seem to change or reset things to the .swf files. One of the options for the target of shockwave flash file, which I installed it, but the other says always ask. I can't change to firefox, if I set it to IE he repeats the open or save as options as it does in firefox. I can't locate any program to open the file in firefox.

  Before the last update that I use to just be able to click on a .swf file and it will open in firefox without problem. I don't know what has changed in the last update, but now I can't open the .swf files unless I do it from the site, I downloaded the file from.

  Try to rename (or delete) the file mimeTypes.rdf in the profile folder of Firefox to reset all the actions file.

  • http://KB.mozillazine.org/mimetypes.RDF
  • http://KB.mozillazine.org/File_types_and_download_actions#Resetting_download_actions

• Update Firefox, now I get an error when you try to open the .mkv files, but not other video files

  I created an html page of cinema at home with links to movies on my hard drive. I have two types of links or href = 'file:///C:/Media/movies/Looney Tunes/MainMovie/Vol 1 Disc 3/VIDEO_TS/VIDEO_TS. IFO' for normal DVD or href = "file:///C:/Media/movies/Blu-ray/Lorax/mkv/THE_LORAX/THE_LORAX.Title800.mkv" for blu - ray. Both have worked fine (click on the link and the movie starts to play with Media Player Home Cinema) for a few years until what I recently upgraded to firefox. The .ifo files still open as usual, but now blu - ray links take me to a gray page that says "Video cannot be read because the daughter is corrupt" with a large "X" over it. If I open the html page in Internet Explorer and click on the link, it works very well (blu - ray opens by using Media Player Home Cinema). Also, if I directly open the .mkv files, they play very well (open using MPHC). Thanks for any help!

  Change your links to include the attribute type with the value of video/x-matroska . Example:

  <a type="video/x-matroska" href="file:///C:/My%20Videos/Cooking/Making%20Gingerbread.mkv">How to make gingerbread</a>

  • https://developer.Mozilla.org/en-us/docs/HTML/element/a

  I also used to get the same behavior with files from web sites, when I had the extension of InlineDisposition installed.

• Once I updated to Firefox 11, I can't open the pdf files. It's more the computer, snow leopard and lion and more than one Web site.

  I've updated to Firefox 11 and now I can't open the PDFs Online. This has happened on more than 1 computer, using the two OS 10.6.8 and OS 7.0 and on more than one Web site. I tried to uncheck "block pop-up windows" in preferences, but which did not help.
  When I use Safari to open the same file to pdf, they open fine. Everything worked fine with my Firefox until I did the upgrade.

  I prefer to continue to use Firefox, but I can't understand the root of the problem.

  Has anyone else had this happen as well?

  Thank you, gentlemen, to find a "solution" to this particular behavior of Firefox. It is really curious that even if the screen is blank, you can indeed save the .pdf Ghost and then open the saved file to view. What is amazing to me is that this issue does not seem to be what makes the hit parade of the problems currently experienced Mozilla. Not everyone will be willing to do a research project extended rather than leave the ship for Safari, etc..

• I opened 2 emails that were in the folder spam from my email and that each contained an attachment zip 2 k and 3 KB. As I could not open directly in my email, I opened the zip files with the "open in" another app option. At the opening of th

  I opened 2 emails that were in the folder spam from my email and that each contained an attachment zip 2 k and 3 KB. As I could not open directly in my email, I opened the zip files with the "open in" another app option. When you open the zip files at this other app asked me if I wanted to extract zip files in a new folder, I have accepted, in both files .js (javascript) files there. I opened these .js inside this same application files and content files white text on black background and that seems to be a script file. My question is: my iPad Air has been compromised by a scam of viruses, such as the Trojan horse thieves and banking password especially as Dridex or Dyreza, the Trojans and ransomware as Locky, cryptolocker, or Teslacrypt. If that were the case, then what is the solution to get rid of these... Thank you.

  Simply delete them. It is not possible to install anything on iOS using this method. For good measure, you can remove and reinstall the application allowing you to open it with, but I don't really have that is actually needed.

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• iCal open the alert file does not

  I have installed 10.11.3. iCal Prefs are set correctly according to the suggestions of Apple.

  However, if I set an alert to open the file in the section 'Custiom', the alert does not open the file or reacts in any way in time. What's most frustrating is when I open the same file again to check if I did something wrong, the field 'alert' is 'None' showing!

  What I want to buy Fantastical2 app (tested, it turns very well), although iCal played perfectly for years on different platforms of OS X, I used?

  Hello there, Bob.

  It seems that you encounter no success with the calendar to inform you with alerts personalized on your MacBook Pro. One thing to try is to test the behavior in a new user. This testing process is described in the following Knowledge Base article:

  How to test a question in another account on your Mac.

  Before you try a different user account

  If you see unexpected behavior on your Mac to first try the following steps:

  Try to search the base knowledge of Apple for the specific symptom or an alert message you see. There could be more simple measures that you can take to solve the problem.

  Try to boot your Mac in Mode safe. Restart your computer. Hold the SHIFT key when you hear the startup sound. Release the SHIFT key when you see the Apple logo appears. Your Mac starts up in Safe Mode. Safe mode performs a check of your startup disk directory and removes data from the cache. Once your finished Mac commissioning, restart the Mac normally (without hold the SHIFT key) and see if the problem is resolved.

  Make sure your software is up-to-date. The question that you see can be addressed by installing the available updates.

  Check to see where the problem occurs. If a problem arises until you see your desktop, it is less likely that it is related to a setting or a user account. If a problem occurs with a Web site, see if the pages of other websites correctly first load. There could be a problem with the site and not your Mac.

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  If there are documents from your user account that you want to test with original, place a copy of these items in the shared folder in the users folder. Press the Option key while dragging a file in this folder to create a copy.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Try the same steps that caused the unexpected behavior to appear. For example, if you are unable to print, try printing from this user account. If you were unable to connect to the Internet, try to navigate on a website of this user account.

  If you use specific test settings depends on (for example using a specific e-mail account or an account iCloud) implemented the same test user account. For email and other parameters, you can use the Internet accounts pane in system preferences to set up these types of accounts. If your home folder files are necessary for tests, copy them into the shared folder in the users folder (/ Users/Shared). After you connect as a user test, copy these items to the same location in the test user home folder to test with.

  If a problem occurs in account only one user

  Is using the same steps in a user account test does not cause the same unexpected behavior, most likely you don't need to reinstall applications or OS X.

  • If a problem occurs only in a single application, check the documentation or Web site for instructions on troubleshooting specific preferences or the definition of the application files.
  • If you need help with a problem or a specific alert message, search the Apple support Web site for the text of the alert message you see.

  If a problem occurs in more than one user account

  If the same unexpected behavior occurs in more than one user account on your Mac, try checking for software or hardware problems.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• Creating recovery discs - "unable to open the following file" error "

  Hello all,.

  I'm trying to create a set of recovery disc for a customer * Satellite L300 - PSLB8A-07U004 *.

  While the application opens and begins the creation of the disk set, there, three times now, failed to with the error message of * 'cannot open the following file. D:\ ! "V5_01_07.VRP (error Code: 020123-F1-00000000). *

  I tried the first time in this process while all customer data were always loaded.
  I have now done a "restoration"out of box experience"because I thought that one of these files may be the cause, but, alas, the mistake was repeated."
  Of course, it's irritating (to say the least).

  I did NOT any changes to the layout or resizing of partitions. »

  Any thoughts?

  rampant_rhino

  Stand by. If I understand you well you CAN restore the operating system using F8, but you CAN create DVDs using "Toshiba Recovery Disc Creator' of recovery.

  Am I right about that?

• Cannot open the PDM file with excel 2016

  Hey guys,.

  I have Office 2016, LV 2015 and (I checked my "TDM Excel Add-in" file) the Excel Add-in 2015 of CT.

  I have attached a picture of what I get when I try to open the PDM file with excel.

  So, I found something strange. I checked active supplements under the excel options and the TDM Excel Add-in is listed as inactive (and is called a COM-add-in). I tried to activate it, by checking the box (see the second picture), but that does not change. Interesting is the last line of my second attached photo:

  Translated it means: ' loading behavior: a runtime error occurred when trying to load this Add-In.

  I have 10-64 bit operating system like windows.

  Someone at - it a solution?

  Kind regards

  Slev1n

  
  

• Open the csv file in labview

  Hello

  its difficult for me to open the .csv file in labview. If someone you suggest program labview or suspicion for bellows file attached?

  its really a challenge to open it in Labview.

  So free then try to solve this problem.

  Thank you

  Use the worksheet in reading file.  You can then use the table to Index to get the first colum and search for an empty string.  This will give you the break between the header data and the actual data.  Take all the data after this line and convert it to a number (String number floating/Exp).

• Place the ini file in a specific location when the application generating

  Hello

  I have a little problem.  I have an ini file that I use to store some settings.  Lets call this app.ini file.  When I build the Application.exe, it puts this file in the data directory.  I was hoping that it would be at a higher level and be located in the same directory as Application.exe is (otherwise it will not read the file correctly.)  Looked at the settings of the Source file in the list of categories in the Properties window for the construction and all the 'Identical to the appellant' Destination, but he did not where I wanted.  I would really like this file to a directory higher when I do my build so that my application to read correctly.  Any suggestions?

  I use this executable then when I do my Installer and the problem just spreads here also, not good.

  One way to solve the problem:

  (1) in the build Properties window, select Destinations and create a new destination. Select the same directory where the exe file will be stored as 'Path of Destination'

  (2) assign this destination in the .ini file.

  Let me know if it works

  Marco