Open with is displayed when you try to run installed programs

After that infection by AV Defender and Symantec virus cleaned, I'm unable to run any of my programs installed.

Hello

Just in case there are persistent pieces of malware here is the method of complete elimination.
.exe question difficulty in the next message.

Try Mode safe mode with networking - repeatedly, press F8 that you start.

The best two methods allow scanners to run and/or AV.exe out of the way or removing.

1.
CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

If necessary use start - computer or Windows Explorer to navigate to

C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
is installed.

Right-click on it and rename it to ZZMbam.COM (or something different than now) and
Double-click it, and then run it like this. You can rename it back later. Do the same with
other programs according to the needs. Use this method to others as needed - NOT assume all
a program deletes all or that it is no other malicious software.

---------------------------------------------------

2.
Another method is to use them:

Use Process Explorer to "Suspend" the process will not stop

Then use AutoRuns to delete the malicious program startup items.

Now use UnLocker to delete the files in the malware.

You may need to do a file at a time.

Process Explorer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

AutoRuns - free
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

UnLocker - free (do not install the adaware Ebay)
http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

AV.exe

==============================================

The AV.exe malware goes by many names:

XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
antivirus, scams for you force to pay for them while they have no advantage at all.

How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)

It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
Run them in regular Windows when you can.

Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Malwarebytes - free
http://www.Malwarebytes.org/

Run the malware removal tool from Microsoft

Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)

Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

also install Prevx to be sure that it is all gone.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
Use Google to see how to remove.
http://www.prevx.com/   <-->
http://info.prevx.com/downloadcsi.asp  <-- download="">

Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

Try the demo version of Hitman Pro:

Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro

--------------------------------------------------------

If necessary here are some free online scanners to help the

http://www.eset.com/onlinescan/

http://OneCare.live.com/site/en-us/default.htm

http://www.Kaspersky.com/virusscanner

Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

--------------------------------------------------------

Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
files.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
turn it back on.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-----------------------------------------------------------------------

If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • Get "communication error with kernel" message when you try to run a virus scan program

    Get "communication error with kernel" message when you try to run a virus scan program

    Hello

    What antivirus do you use?

    Follow the steps in the article mentioned below and check if this solves the problem.


    The error message "error communicating with kernel":

    http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280

  • My administrator accounts will not accept PW administrator when you try to run a program. The IPL is corrent, because I can't lon on the administrator account by using the same PW. Any advice?

    Must be explicit

    Hi Ronnox,

    1. do you receive any error messages?

    2. were you able to use the Admin password before?

    3. did you of recent changes to the computer?

    4. This occurs when you try to access a particular program?

    If this only happens with a particular program, you can try uninstalling and reinstalling the program and check.

    Uninstall a program

    Hope this information is useful.

  • Code 80070241 in Windows update and "Windows cannot verify the digital signature for this file" when you try to run any program.

    Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.

    I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »

    After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).

    The restoration went well, restarted, but the problem persists.

    Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.

    The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.

    The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.

    It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.

    On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.

    The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.

    Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.

    However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.

    ***************************************************

    Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?

    Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.

    This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.

    So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.

    Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.

    * shrug *.

    Computers.

  • Want to Turn off UAC prompt when you try to run a program.

    Original title: shortcut Windows 7 running a program that will start / stop services.

    I use a shortcut in windows 7 to run a program that start / stop services.  He always asks me permission to run this program and I always want to run.  But it's the only shortcut that I encouraged it from.  Is there a way to flag / allows this action?

    Hi ctcp-ga,.

    You can try to change levels of notification and check if you get any user account control prompt.

    Enable or disable the User Account Control

    http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

    How can I change the behavior of user account control by using the slider?

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error when you try to run an application that worked when built with 8.6

    I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

    Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

    Hello!

    The same problem ?

    I talked with my local OR technical support team. The application now works without any problem.

    Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

    Best regards.

  • When you try to uninstall a program, I got this message; Could not open install.log file

    When you try to uninstall a program, I got this message; Could not open install.log file

    Try using the following uninstall programs:

    IObit Uninstaller 1.1
    http://download.CNET.com/IObit-uninstaller/3000-2096_4-75161625.HTML?tag=mncol

    Advanced Uninstaller Free 10.1.1
    http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

    Revo Uninstaller 1.91
    http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  • HP Officejet 6500 E709n: HP Officejet 6500 E709n hangs with mac (Mavericks) when you try to save changes to scan destination

    HP Officejet 6500 E709n hangs with Mac (Mavericks) when you try to save changes to scan destination. That's all!

    What is the problem of HP?

    Hello

    What application you want to scan to?

    Try to install the HP Easy Scan software, it will be installed in the Applications folder:

    https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

    You see a difference using?

  • Error message: "the version of this file is not compatible with the version of Windows that you are using", when you try to run an old ms - based back program in Win-7 Ultimate 64 bit.

    Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

    I get this message when you try to run an old MS-DOS - based program in Win-7 Ultimate 64-bit.

    "The version of this file is not compatible with the version of Windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

    I understand that I am under a 64 bit OS, but is it possible to get this program to run? I was wondering if anyone has tips :)

    Hi Bcopeland,

    Thanks for posting your question in the Microsoft Community.

    Based on the information, you are trying to install and use an old ms - dos program based in Windows-7 Ultimate 64-bit.

    The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

    You can check the compatibility of the program with Windows 7, in the Compatibility Center.

    Compatibility Center

    If the program is not compatible, then you try to install and run the program in compatibility mode.

    a. click right on the program.

    b. click Properties.

    c. click on the tab compatibility.

    d. Select run this program in compatibility mode and select Windows Vista or whatever to use the system, the program was executed successfully.

    Here is an article that gives you more information on this:

    Make older programs in this version of Windows

    If the problem persists, you can get in touch with the software vendor to see for the latest version of the program to use the same system of 64-bit Windows 7.

    Hope the helps of information.

    If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

  • When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up

    When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up.  The header says 16-bit subsystem MS_DOS.  For example, when you try to start Microsoft Word, the message says:

    C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.

    I can start the program by clicking on any document in my documents file, however.  I know that something is messed up in the registry (we had a bad worm (MS Removal Tool).  However, I can't a registry cleaner to open.  I used a WinXP_EXE_Fix.reg to try to fix the missing exe file.  He has set a number of things, but still will not let me run a registry clean.

    Any help?

    Hello

    Try the following steps:

    1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

    2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

    NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  • When you try to access some programs, Windows Vista will stop and then restart

    There are some windows programs that I can't access because my computer says that windows has stopped working then he says looking for a solution and then he says: restart windows. I can't access my programs and features to remove some programs I think may be worth. I can't access MY computer optison either.

    Hi billdee,

    (1) since when are you facing this problem?

    (2) remember to make changes?

    (3) what happens when you try to uninstall the program?

    Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
    Difficulty of broken desktop shortcuts and common system maintenance tasks

    Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

    Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

     

    Method 3:  Put the computer to boot and then check if the problem persists

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

    Method 4: check the logs in Event Viewer for more information on this problem

    Open event viewer

    What are the information in event logs? (Event Viewer)

  • When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled

    When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled. message also indicates that there are errors.  How can I me then chkdsk to run

    Hello

    See if these two tutorials to help you with this.

    "How to run the check disk at startup in Vista or Windows 7"

    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    "How to difficulty Chkdsk will not run at startup in Vista"

    http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

    See you soon.

  • 8024A 000 error code when you try to run Windows Update on Vista 32-bit

    I get the above error when you try to run Windows Update on Vista 32 bit.

    I use an Asus laptop and have used the Asus recovery cd.
    I just replaced the old HD (500 gb) as it failed with a 750 GB HD.
    I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".
    Any help would be greatly appreciated.
    Thank you
    Sam

    Thanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.

    See you soon
    Sam
  • 5 error message when you try to run gimp - 2.18.16 - Setup could not create the directory

    5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
    Setup could not create the directory
    c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
    Error5: Access denied
    In the Temp folder under Security I have:
    'SYSTEM' with full control
    "Administrators" with full control
    "Username" with full control
    All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
    The two latest downloads gave the same error message.

    Thank you for your time.
    Debbie

    I suggest you do this:

    1. click on the start planet.
    2. type cmd.exe in the search box.
    3. press on Ctrl + Shift + Enter
    4. click on "run as Administrator".
    5. type the following commands exactly and press ENTER after each:
    takeown /f "%Temp%" / r

    Cacls "%Temp%" / t/c/g "%nom user %": F System: F

    (Enter Y when you are prompted "Are you sure?")

  • When you try to run the SFC/scannow I get the following message: Windows Resource Protection could not perform a requested operation.

    When you try to run Fsc/scannow I get the following message: Windows Resource Protection could not perform a requested operation. Can anyone help?

    Original title: problems with Windows Live Update

    You run it from a (run as administrator) command prompt?

    SC Tom

Maybe you are looking for

  • Why can I not set the message pane to what I want the setting to stay to display/no display with F8?

    Everytime I open Thunderbird I have to press the f8 key to remove the message pane.I'm sick and tired of this! With any other program no matter how make you an adjustment heis the same when you reopen the program unless you want to change it. Please

  • 15 - af106nt: FN keys wrong

    FN keys does not work. I tried the BIOS Setup. What can I do? Please help me.

  • Satellite 2400 - front buttons not working not

    For some reason, my front buttons (play, pause, stop, etc.) for wmp have stopped working. If I run wmp and try pressing one of them, nothing happens. I tried to find a replacement of the driver, but I'm not sure that one to download to fix this probl

  • Impossible to install WiFi drivers on hp 655

    HIE hp that I tried to install the drivers wifi atheros Communications Inc., but in netwrok Manager cannot find the adapter Here's my hardware information PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C & REV_01PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103CPCI\

  • module relay and DAQ Assistant

    Hello world! I am a beginner, and currently dealing with simple business priori Labview. Recently I got a USB relay Module must be integrated into an alarm system. Let's say that if we get some more value than the other, the relay must be closed and