Opening Subvi in the same monitor like main vi

How to make my Subvi to open in the same screen the main vi is in?  I tried the execution window position options, but that seems to fix the Subvi to a particular monitor.  I want the user to be able to drag the main vi in any available monitor and open the Subvi this monitor.

Thank you

Learn a few methods of VI:

Before Panel.Run - Time Pos.Get - returns a bunch of default stuff including watching the front panel is on.

Before Position.Centered Panel.Run - Time - specifies where the VI will appear the next time it is run.

In addition, defining the position of the window may move between monitors.

This might get you where you want to go.

Mike...

Tags: NI Software

Similar Questions

  • Tecra S2: Definition of external monitor like main display

    Hi all

    last week I got a new laptop Tecra S2 and I have the problem to my external monitor like main screen in dual display mode. The section in the window is grayed out.

    Anyone know how can I enable this feature?

    On my old laptop (Tecra S1 with ATI graphics card) there was no problem to move the main exit from the internal to the external display.

    Sincerely,
    Martin

    Hi Martin

    As much as I know it is not possible to set the external monitor as primary. The LCD cell is always set as primary. I use Tecra M1 (similar to S1) and this option is grayed out too.

    In my Office I use it with docking station and external monitor. When Windows starts the first appears on the external display, but the log in window is still shown at laptop LCD.

    Sorry, but it's like it was. Designed Toshiba display driver has been installed on your old Tecra S1?

  • After some time, my screen goes black have to re boot. It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr

    After some time, my monitor goes black have to re start at 5 min to 2 h said mge device is grapish until this day.   It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr XP HP pc 1.3 gh 512 ram 120g hd

    Assuming that the integrated graphics controller is OK, try the following:

    Launch a command (as a Runas administrator) window and enter the following commands in it:

    powercfg-h off

    powercfg/change-standby-timeout-ac 1440

    The first command turns off "Feature of putting into hibernation"

    The second command replaces the timeout stansby 24 hours when the system is connected to AC power.

    (The number is in minutes).

    Good luck.

  • Help! Need a script to automatically open files with the same name but in another location.

    Good morning friends,

    So for my work, I need a script to open files with the same name but located in a different folder. But since I'm a total noob when it comes to programming, I can't understand how do. That's what I have in mind:

    -J' I manually open an image.

    -The script will look for a file with the same name in another folder that I've specified.

    -The script will then select the channel CMYK of the second file and copy and paste it into the first file.

    -The second file is then closed without saving the changes.

    I have problems with the part where the script searches for a file with the same name as the opened file. I would really appreciate help. Thanks in advance.

    If (app.documents.length > 0) {}

    myDocument var = app.activeDocument;

    var Nomdoc = myDocument.name;

    try {var basename = docName.match (/(.*)-.)} [ ^\.] +$/)[1]}

    catch (e) {var basename = thedoc.name};

    var path = / * path of folder to insert as a string here * / + ' / ' + base name + / * insert file extension, including the period as a string here * /;

    If (queue (path) .exists == true) {var otherDocument = app.open (File (path))};

    };

  • How to view Subvi on the secondary monitor with remote panels?

    I try to have a Subvi, called from a VI hand open on a secondary monitor.  I use panels remote to control my main application, which is open in a web browser on the secondary monitor.  I tried to adjust the monitor properties VI - Position of the immediate window - to '1' and also tried to set this value programmatically by using the node property of front panel, but doesn't seem to work.  My Subvi always appears on my primary monitor.

    I use LV 8.6.1 RT and my application is running on a CRIO.

    I'd appreciate any help.

    Thank you

    Dan


  • Why FF14 open 2 of the same web page when you start task bar or a web email link favorites. Does that since the last update.

    If I chose FF from the taskbar icon, it opens the same homepage twice - as individual pages. Done the same thing if I select a web page saved in my favorites folder or if I select a web link in an email that I received.

    I'm currently one of pages windows close and then if I want a different site FF behaves like 'Normal' with "single" new windows [with the 'shift' key] or "added" window for one open.

    If I close FF and want to open a web page link, it opens again 2 on the same site as 2 MS windows!

    This is perhaps a problem with the DDE that makes Firefox opens the page on both channels.

    You can try to redo the default browser and make temporarily to another browser the default browser.

  • How the external monitor, my main screen and not the laptop?

    I went to devices-> project->, extend, but the only option seems to be the laptop as main screen and the secondary monitor. I would like to the external monitor to the main screen. I did it on other computers, probably, it is possible with the updated technology?

    Any help would be appreciated.

    Thank you

    Hi tide,

    I suggest you follow these steps on an external monitor as the primary display.

    a. drag from the right edge of the screen, tap settings, and then click change PC settings.
    (If you use a mouse, point to the corner bottom right of the screen, move the mouse to the top, click settings and then click Change PC settings).

    b. press or click on PCs and devices, and then tap or click on display.

    c. in the image preview, tap or click the monitor you want to use as the main screen for the select.

    d. Select the checkbox make of this my main screen .

    See the article for more information.

    Get the best display on your monitor
    http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

    Note: applies to Windows 8.

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Adobe muse opening window in the same page

    Hello would like to know if I can get muse to open another window in the same page as the image below, let's say the small box is a picture of a product and when I click on the Details button, a window should appear with decription in the same page.

    Thanks in advance

    Sans titre - 19.jpg

    Yes, use the ToolTip Widget's Composition.

  • PS anchored to an additional monitor not opening not in the primary monitor

    So hope that someone can help do.

    I am running CS5 on a laptop with Win7 (my desktop system had a motherboard failure) that is connected to a 23 "monitor. For some reason, Illustrator and other parts of CS5 Design Standard seem if open fine on the 'main menu' designated, but Photoshop does not work. Maybe it's that I didn't actually * used * the other parts of CS5 on my laptop. PS would have some 'I'm doing this because I have always done this way' parameter it won't let go? I can just drag it to my main screen (I can, but that is uuuugly which defeats the purpose of the use of the giant screen).

    Thanks for any help you can offer.

    KC

    I try that, but given that this aspect of the work in PS is new to me, it's possible that I did it incorrectly. Had a similar "glitch" today when I decided to change my preferences to take my previous settings on the old system. I thought that my system has hung up when instead, it was just a matter of the dialog box Preferences hanging out on the laptop monitor. After realizing what was up, I changed the setting I wanted and closed the dialog box. The next time I open it, it opens on the main screen. Go figure.

    Well, an easy solution which is fine with me - I just put everything to work on the 23 "monitor only rather than both in use. I don't really need (that I know of) to be able to extend the monitors. I was trying to and thinking that it might be useful. Down the line, I may find it does, but now I'm going to stay with what works best for my way of neurotransmitter of work and limited. In addition, by limiting my work area for the monitors, my compressed area is used for the entire screen of the larger screen area. Much easier for to keep me track of cursor.

    How the hell "old.

    Thank you very much.

    KC

  • How to display two open sites at the same time on the screen instead of switch between tabs?

    I need to open two different sites using Firefox. They appear as tabs, but I can only show a tab at a time and have continually switch back. I need to have two separate sites open and displayed simultaneously on the screen. Is there a way to do this or an add-on that will support multiple windows open on the screen?

    You can open all pages in separate windows and resize and position windows horizontally or vertically to the two visible at the same time.

    Note that you can drag a tab slightly downwards in the navigation window to tear off the tab, or use the context menu of the tab (transition to the new window).

  • V29 Firefox to open links in the same window

    Since the installation of version 29, I found only two apparently related questions:

    (1) I find that links open in the same window as the source, instead of a new window.

    For example, I get a notification of a newsletter every day in my Yahoo email account. Before v29, when I clicked on the link in the email to go to the newsletter, it would open in a NEW window (my preference).

    With version 29, it opens in the SAME window (and replaces the window where I had Yahoo mail open).

    (2) in the same way, I do a lot of work where the links will appear in an Excel worksheet. Previously, whenever I clicked on one, it will open a new window. If I clicked on 6, I have 6 windows open. Now, every link I click REPLACES the last one that I opened.

    These two problems are very annoying and slow me down.

    Is there a setting where I can change this behavior?

    I found that after Firefox v29, a LOT of my settings and

    Add - ons have been changed / reset. Try this;
    Launch Firefox in Mode safe

    While you are in safe mode;

    Firefox Options > advanced > General.

    Find and stop using hardware acceleration.

    Then check ALL your settings. Browser and Add-ons. Then restart.

  • Don't know what happened, but now, everytime I open a new tab, a new window opens that contains the same information as the tab.

    Don't know what I did, but now, everytime I open a tab, the tab opens as it should, but it ALSO opens a new window containing the same information as my original window. (same tabs, etc.) Almost a duplicate of my original window. I searched everywhere for a solution, but fails.

    Hello

    The reset Firefox feature can solve many problems by restoring Firefox to its factory default condition everything and save your essential information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    Thank you.

  • External monitor like main screen for M200 with docking station

    Hi all

    I have a Tablet M200 with GeForce FX go 5200. I have a Toshiba docking station and an external LCD display. When it is docked, I would use the external LCD as main display and the LCD builtin as the secondary display. (I want the taskbar, icons and newly opened windows on the external screen when it is docked.)

    Unfortunately, I can't find the right combination of settings of this. If I put Windows to extend the desktop on the external screen, "use it as primary display" option is grayed out. I don't get the span horizontally or vertically options in the nView utility, just the Standard and the Clone (and this only if I do not extend to the office.)

    How can I get the external screen be the main while being the internal school?

    Thanks in advance!
    Kind regards

    Levente

    Hello
    What home-unit station use?

    Tablet Multi dock PA3315E-1PRP or Port Replicator advanced III: PA3314E?

    thx for the info,

    Good bye

  • Satellite A200-1AE: how to set external monitor like main screen on Win XP

    Model: A200-1AE
    OPERATING SYSTEM: XP SP2

    I want to use the external display in Windows XP. It would be necessary that the external display is the main thing and office expansion took place on the computer screen. The driver, downloaded from your site do not do... If this possibility is, in Windows Vista.

    How it is possible to solve my problem?

    Hello

    As far as I know that's not possible. In my case, this option is grayed out!

    But maybe it is possible on your laptop. In this case, you must Access the properties of the graphics card. Then go to the last tab called settings.

    There, you must mark the 2 screen and activate the option called use this device as the primary monitor.
    But if this option is not available you will not be able to settle this!

    Best regards

  • Cannot set external monitor like main window on T500

    How can I configure my external monitor as the main in Vista window when it is connected to the docking station DVI port mini?
    "My problem is that the check box ' this is my main monitor" is always disabled after having extended my desktop to monitor 4.

    The external monitor is loaded as screen 4. (Screen 3 is the T500 and 1 & 2 is assigned to the internal Intel screen card that is not in use)

    Thank you
    Philippe

    Vista because of grief in this regard and we have never seen a good answer about why.

    The good news is the utility Thinkpad Presentation Director - fire just that upward and step through the wizard. It will allow you to set up your monitors as you wish and save it as a profile. In most of the situations that the configuration will be available when anchor you, but worst case are you just select the profile of the PD icon in the task bar (or the value of the checkbox to automatically apply whenever the laptop is connected).

    I want to emphasize however that we have to make these options - the great victory is the ability to put primary watching for whatever reason Microsoft has grayed out in regular checkups.

    Best,

    Kevin

    P.S. If you really don't want to see the configuration of four screens and that you will not use the switchable graphics in the BIOS you can set discrete graphics (only) display rather than switchable. You will still likely PD to define primary/Main.

    PPS you should also be able to do through the ATI Catalyst Control Center, but in some cases that makes you stop more than the PD Assistant.

Maybe you are looking for