Operating instructions: how to manually install updates and difficulty stucked relies
OK I finally got, and here is the update method. It is completely safe and if a problem occurs, it will stop and you can restart your TPT as always.
Here are the steps :
1) you have to download the firmware here:
http://download.Lenovo.com/slates/think/tablet1/
(seems its not available and they were fired 0075 day, but it will be word for any updates)
Improtant : If you're on 0052, you must manually install 60, then 65 and 75. In other words, you cannot go from 60 to 75.
2) you have to paste the firmware in .zip format (exactly as you download it) on your SD card.
3) restart your TPT. When the screen lights up, start pressing Volume up for several times. You will see that you go to the recovery image, she writes. Wait...
4) now that you are in recovery mode. with press volume up and down, you can navigate and pressing the button walk / stop, you enter the menu. Choose "install the update from SD card" and choose your firmware (with the sequence) .and wait device finish its work.
Fact!
(Edit #1: If you're stuck on an update and the update of your system does not work and also you do not use the manual update - which is not harmful at all - you can follow this method: for example, you're at 0052 - who stucked as many people on this build - if you manually install 0060) , your TPT will update to 0060, DO by WHICH as long AS. just try a few other goofy, which is not the next generation. TPT will try to update it will stop because of the mistake of sequence, but it will fix the update of the OTA system, fun)
TNX to Hongkong,
0075_US link:
http://download.Lenovo.com/slates/think/tablet1/ThinkPadTablet_A310_02_0037_0075_US.zip
Tags: ThinkPad Tablets
Similar Questions
-
How to manually install updates of Photoshop CC 2015?
Our systems are disconnected and therefore cannot automatically download the latest patches. Is there a link somewhere to download the updates, so they can be installed manually? Or do I have to build a new full installer whenever there is an update?
updates CC:
http://prodesigntools.com/Adobe-CC-updates-direct-links-Windows.html
http://prodesigntools.com/Adobe-CC-updates-direct-links-Mac.html
CC updates of 2014:
http://prodesigntools.com/Adobe-CC-2014-updates-links-Windows.html
http://prodesigntools.com/Adobe-CC-2014-updates-links-Mac.html
CC updates to 2015:
http://prodesigntools.com/Adobe-CC-2015-updates-links-Windows.html
http://prodesigntools.com/Adobe-CC-2015-updates-links-Mac.html
-
Hi, I have had to do a reset on my phone and lost all my programs. I can't work how to re - install Photoshop and Lightroom without buying again. I have a plan of creative photography of cloud, but can't even work out how to download the item creative cloud program/app.
Hello
You can download the installer for Creative Cloud from here:
Creative cloud help | Creative cloud desktop.After you install the creative Cloud desktop application, you will need to sign in with a login password and Adobe. Then you can install applications. This link provides more information and step by step instructions, if you need: CC help | Download, install, update or uninstall applications
-
I start the download for cs5 and it comes back with an error that it can not install updates. and try later. I've tried about 6 times
Hello Tracy,.
How exactly you are trying to download and install updates?
Is it a mac or windows?
Manually download CS5 CS5 download products
Download the updates manually CS5 for Windows here: https://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
Download the updates manually CS5 for Mac here: https://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh
Concerning
Jitendra
-
"Cannot install update and the error occurred ' iOS 9.3.2
Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?
Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.
-
MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.
You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.
Maybe someone else will chime in with their own experiences.
Russ
-
error code 0 x 80246007 appears when you try to install updates and the windows store purchases.
any help appreciated
Original title: error code 0 x 80246007
Hello
Please try the patches for Windows Updates:And for store related issues, use Troubleshooting Windows App tool:Hope this helps, good luck :) -
Machine 'frozen' when downloading updates and is stuck at 30% complete.
I can't get my computer to download or install updates since 03/11/09. On the taskbar, the icon to update said that updates are 30% COMPLETE. Apparently, she tried to download updates
and failed at 30%. I tried the solution with the command prompt, but nothing has changed. I am really behind in my updates. Internet Explorer keeps freezing upwards when I pull a program and I think that if I could finish the updates, this will stop happening.Hi Beverlyv,
Welcome to the Microsoft Answers site!
(a) do get you any error message when updates failed?
Method 1
Download and install the latest installer of windows on your computer.
http://support.Microsoft.com/kb/942288
Method 2
Step 1
Windows Update, click Update history, click with the right button on the update failed and clicking on details and find the error code and reply back.
Step 2
Open the link below and the click on it the key difficulty that will reset all windows update components. Try installing updates and check if it is to proceed with the installation.
http://support.Microsoft.com/kb/971058Read this link:
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updatesHope this has been helpful.
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
Duplication did not begin until I tried to load the list of updates. Continues to tell me the same updates are available and download them if allowed. Only the update that has been update group above that does not DOWNLOAD is Internet Explorer 8 for Windows Vista, which I am downloading now. When I go to 'historic day' to remove duplicates as indicated in the instructions for help. duplicates above are not listed. Of the; folding situation is on a Gateway laptop. I am writing this issue on my Gateway PC.
LiveUpdate install updates for your Symantec/Norton application only.
Don't worry what you see in the installed updates or unable to uninstall the 3 updates, simply 'hide' and move.
1. stop the automatic updates service:
Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
Double-click automatic updates > click stop
(Stopping the service will take a moment)2 remove the contents of the download folder:
Start > Right click on run , and then select run as administrator >
(type or copy/paste) %windir%\SoftwareDistribution > [OK]
Open the download folder and delete its content
Close the window.3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update | View the updates available (or Select the updates installed): right-click on KB976325 KB973917 and KB974318, in turn. Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.
4. start the automatic updates service:
Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
Double-click automatic updates > click Start
(Stopping the service will take a moment)=====================================
To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Could not install updates and get error Codes 652 and 8007065 what is happening?
Updates impossible to install and get the following error 652 and 8007065 codes
Do I need these updates for Windows Office, word and works?
Hi SallyWebster,
· What are the updates you are trying to install?
· What operating system is installed on your computer?
Method 1: Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update. Click on the link below and follow the instructions.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 2: Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the updates.
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
Method 3: You can download standalone update packages (you want to install) and then try to install them manually. Check if you get the same error message.
Method 4: I recommend you put your computer in a State of clean boot the try to install updates.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
Install updates and then comes back to taking them out!
Operating system is Vista Premium: cannot install KB2539636, 2567680,2536276,2562937,905866,2559049,2563227,2539633,2556532,2539636 and 2563894. Some of them say: the version of Windows, I installed it, does not match updates, I'm trying to install Windows Update sent to me - and some of them say: sales of products and say a few: does not exist! I hesitate to call PC security because they have in the past caused my laptop to reboot continuously. They claimed they had reset all updates and it will take about 24 hours for the re - install. Well, after three days of constant restarts, I stopped which by inserting my CD of the operating system by clicking on repair! Someone at - it answers... My system is: Windows Vista Premium 32-bit!
Hello
1. Since when are you facing this problem?
2 have you made changes on the computer before this problem?
3. were you able to install the updates successfully before this problem?
4. What is the error message or an exact error code?
I would suggest trying the following methods and check if it helps.
Method 1:
Try to reset the Windows update components and check if it helps.
How to reset the Windows Update components?: http://support.microsoft.com/kb/971058
Method 2:
Try a clean boot and see if it helps.
How to solve problems using the boot in Windows 7: http://support.microsoft.com/kb/929135
Note: once the diagnosis has been made, make sure that you try to step 7 of the article to reset the computer as usual.Method 3:
Try to install the updates manually using the number starting from Microsoft Download center.
Microsoft Download Center: http://www.Microsoft.com/downloads/en/default.aspx
Hope the information is useful.
-
How do to install updates failed - HP Support assistant
I'm on HP Pavilion dv6 notebook supporting have Deputy 6.1.12.1. Sometimes when updates are available, it downloads and installs them. But all the updates one or two fails during installation. So if I rescan failed updates succeed analysis shows that there is no stock on hold. Can you please let me know how do to install the updates failed? Thanks a lot for your help.
The details that may be needed:
1. number and product name
HP Pavilion dv6 Notebook PC
A5F76AV
2 operating system installed (if applicable)
Windows 7 Home Premium 64-bit
Few updates to pilot pushed via HPSA have 100% since the configuration and modification of systems success rates. So why you see that they do not install.
They very probably get blacklisted on a case where if they have problems based on reports of customers through contact centers or data collected through Customer Experience Improvement Program, which is characteristic of the HPSA. Just give it a few days once update is ready, it will install fine without any problem
-
Update icon shows in the lower tray instructing need to installed updates. The same updates keep the installation time and again, but the icon remains.
Hello Tornado1954,
Follow the steps in the article to reset the Windows update components and check if the problem persists.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
I hope this helps.
-
How to manually install windows vista (KB929777)?
I can't get this to load. I had to reload windows Vista and present an update is my cock.
Separated from -.
Hello BryneMoore,
Could you please turn the following
- Press the Windows Logo key + R-> Type WUAPP
- Go to View Update History
- Go to installed updates
- Find KB929777 and remove KB
- Reset
- Re install updated via WUAPP and restart.
Profit?
EDIT
Adding to this do the following if the said above fails...
Was it a custom build computer? Curious...
Try to remove all the RAM and leave only 1 stick of RAM in your computer.
then try to update.
Answer if not
Thank you
-John
- Press the Windows Logo key + R-> Type WUAPP
-
I can not install updates and no error message appears, please help
I tried to install the updates and the computer will restart itself, try to install them and then say that the installation has failed. No error message and none of the solutions proposed in the FAQs apply to my situation. My computer did this for several months. Anyone know how I can fix this problem?
Hello
you post your question in the wrong forum
______________________________________
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or please repost your question in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
Maybe you are looking for
-
What is the Arch of fire and what is its function?
What is the Arch of fire and what is it ' s function?
-
I'm using labview 11 and recently updated with service pack 1, some of the sub vi I get the error message bad coupling at the void / vi, although it seems no one evil thing. I could see the sub vi in the Project Explorer.
-
Microsoft office client virtualization Manager
Hoi, ik ben René en heb een klein en dat location is: "Elke keer dat ik mijn laptop aanzet zie ik ' microsoft office client virtualization Manager works niet en dat ik maar moet wachten dat er naar een Word gezocht opl. IK squeeze said al een week no
-
Change the content of the pane at run time
Hi, I use a PaneManager have 3 components, in one of the screens of my application. I have two menu items, clicking on which I have to change the content of the windows, based on the menu item that the user has clicked. To achieve this, I try to remo
-
Several applications with lib install via OTA problems
Hello We have several applications that use a library. We offer them to users via OTA. So in all files jad app add us links (url, sha1 and size) to the cod of the library files. But we found the following problem: sometimes after an installation of