Operating system is unable to find the wireless network adapter

Similar Questions

• Inspiron unable to find the wireless network, wifi catcher is on

  I have a Dell Inspiron 1500, recently was unable to connect to the wireless network. Cannot find same wireless networks when I search. A WiFi catcher is enabled.

  Hello

  I suggest you to follow the steps in this link and check if it fhelps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Also check out this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  It will be useful.

• HP Photosmart 7520 unable to find the wireless network

  Printer: HP Photosmart 7520 e - ALL - IN - ONE SERIES

  Router: NETGEAR router WNDR4000

  Hi all

  After receiving our new HP all in one printer, we have found our network wireless networks list wireless during the printer set up. We are able to receive the networks of our neighbors, but not our network.

  We tried:

  • Using the WPS function on the router and the printer
  • Establishment of an open on our router wireless network
  • Connect to our wireless router using the setting on our laptop when the option during the installation of a PC.

  Any help on this subjest would be appreciated.

  Best regards, Nick van der Lee

  Hello

  I found the problem that was the printer not to see the SSID of the router.

  The wireless channel was on channel 12 for the frequency of 2.4 GHz. While I was looking around I found this Support Page for Nintedo. Point 6 is a mention about these channels with respect to the same problems I was experiencing with the printer.

  By changing our channel to channel number 3 number, we could see the wireless network.

  It's a bit weird because I thought that the printer has a full specification b/g/n but apparently not?

  In any case thank you for your support.

• Moved from Office Windows 7 from one room to the other and now it cannot find the wireless network

  Hello world

  I have a HP Pavilion running Windows 7.

  He was hooked through the ethernet in a single room.

  I moved it to another room where there was no inflexible access, so I relied on the use of our wireless network.

  Now, the computer will not even find the wireless network.  When I have the help, it says "no available connection."

  In the center of the network, selecting wireless has a red X to the left of the green signal bars.

  At first, I wondered if maybe the computer was in a "dead point" in our House, but I've put a laptop beside him and he found the thin wireless network.

  Any help?

  Update: I tried system restore and tried to stop/resume knowledge network locations, but to no avail.

  Here is the info on my card wireless directly from HP site:

  Original driver for the solutions of Dualband network Atheros 802.11 Wireless Module a/b/g/n.

  I found what I think, it's their website, (http://www.atheros.cz/atheros-wireless-drivers.php), but surprise... they only model # s, my info does not.  Ugh.

• Windows 7 do not connect the wireless network adapter

  When in Device Manager it is k o workining with all installed software & advance mode: saying activated

  OM

  Original title: windows 7 do not connect the wireless network adapter when in Device Manager, it works with all installed software & advance mode: saying activated

  Hi omsaini,

  Thanks for posting your query on the Microsoft Community.

  Sorry to hear that you have to connect to a wireless network adapter trouble.

  To help you further on this subject, it would have been really helpful for us if you had

  mentioned a few details such as:

  (1) is there an error message you get when you try to connect to the internet?
  (2) is the persistent problem with all browsers installed on the machine?
  (3) what is the brand and the type of the network adapter (whether ADSL or an adapter included)?

  However, there are a few steps that we can try first:

  a. the following link has a very good tutorial on how to install a network adapter on the computer:

  http://Windows.Microsoft.com/is-is/Windows-XP/help/networking/install-wireless-network-adapter
  (Note: the link is for Windows XP but works for Windows thus 7\8)

  b. the following link provides a holistic approach for DIY difficulty on the connectivity of Windows:

  h ttp://Windows.Microsoft.com/en-US/Windows/Network-Connection-Problem-Help#Network-Problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  c. also, you can visit the following links as well:
        http://Windows.Microsoft.com/en-us/Windows/cant-find-wireless-network#1TC=Windows-7
  And http://windows.microsoft.com/en-us/windows/cant-connect-to-network#1TC=windows-7

  I hope this helps. Please contact us if you encounter any problem.

• HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

  PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

  OS: Windows 7

  OWNER: More than 2 years without any problem

  LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

  QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

  Help!

  I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

  -Spencer

• HP B209a cannot find the wireless network

  I'm running into a problem with my B209a find a wireless network.  I'm not well versed in wireless/network please bare with me.   I have an iMac with OS X 10.8.2.  Recently, I upgraded my router to an Airport Extreme.  My Mac can see the printer correctly, however, the printer cannot now see the network.  Airport utility, I see all our appliances listed under wireless clients and an IP address without a name (printer?).  Doesn't look like not to add manually wireless clients is no longer an option.

  The wireless is configured with WPA/WPA2 Personal Security.  The radio is set to 802. 11A / n - 802.11b/g/n (automatic).  Anyone have any ideas on how to solve this problem?  Thank you.

  1. Printer, restore the configuration of the network printer.
  2. Turn on the radio to the printer.
  3. From your Mac, connect to the network printer called hpsetup.
  4. Open Safari and select Bookmarks-> Show all bookmarks.
  5. Select Hello on the left.  Your printer should appear in the main window of Safari.
  6. Double-click the printer.  The printer's internal web page should appear.
  7. The Green Network on the printer web page tab.
  8. Select Wireless (802.11) on the left
  9. Press start the wizard and follow the prompts to connect the printer to the network.

  This should get back you on your feet.

• 5525 printer cannot find the wireless network

  Help

  I'm not good with technical stuff and need help with this problem.  Printer works well before going on holiday - power off, including the CISCO router when we went away--returned and turned on any return, printer will not connect to the router again.

  Have reinstalled router without result.  All other computers, phones, etc. to connect to the router fine.

  Wireless network test that the MAC address filtering is enabled, they suggest however have checked this and it's not.

  Wireless configuration wizard can find the network but it just seems impossible to connect to him.

  Please assume the lowest level of technical understanding when you reply!

  Thank you

  Hi K27,.

  I see that you are having some problems getting your Photosmart 5525 reconnected to your network after just unplugging a bit. I understand that you have your information wirelessly, but I don't want to set a link here which will take you to our HP print and doctor Scan, which can help you check some things on the wireless network.

  Since you already feed the router to bike, I would recommend restoring the default values of network on the front panel of the printer. You'll want to have your printer on the home screen (should say Photo, Apps and copy). On this screen you want to touch the key/tool icon in the upper right corner, then you want to click on wireless and made scroll down looking for default network. Once you click on that it will ask if you are sure and you want to say Yes. Once that is done, I would recommend the router/printer power cycling tips that were previously provided and then run the wireless configuration that you've been already and it should be able to connect at this time.

  That should hopefully fix it for you, so let me know what happens and I wish you a nice day!

• HP 15 D103tx: can't detect the wireless network adapter in Device Manager.

  

  I can't detect wireless network adapter in the device even Manager after installing the drivers wireless from the following link: http://support.hp.com/in-en/drivers/selfservice/HP-15-d100-Notebook-PC-series/6782098/model/6837966?...

  Wireless "F12" key remains orange color after pressing it several times. I tried to install "Drivers HP wireless button" from the link above, but between th installation process I have error ot OS isn't accomanied for pilots

  

  I can't connect to a wireless network from my wireless adapter doesn't work. I have to sit near my wifi router to connect with laptop computer using lan cable.

  Even HP Support Assistant does not detect the wireless network card hardware

  

  Help, please!

  Hello

  According to HP Partsurfer, your lapotp came with Atheros AR9565 802.11bgn 1 x 1 WiFi and Bluetooth 4.0 adapter combination WLAN. Also, your laptop came with FreeDos and I guess currently installed Windows 8 64 bit OS, I am correct?

  The Support page for your machine, doesn't show that the Realtek RTL8188EE 802.11b/g/n Wireless LAN Driver for Windows 8.

  Please download, save & install the Dirver and restart the system, check if the wireless works.

  Concerning

  Visruth

• ConfigFree: windows pop up message: sellers application is controlling the wireless network adapter

  Hello

  When I draw a line from nearby wireless networks (with or without WEP security) to the laptop in the middle icon,
  a popup message with the text: the provider application is controlling the wireless card.
  Does anyone know what this message or where I can get the answer to this question?

  After clicking on it you may see far (only the 'ok' button is available), the connecting line with the laptop wireless network disconnects after
  a few seconds.

  Thanks a lot for helping me...

  Hello

  In my opinion this message appears because a 3rd WLan utility configures and controls the WiFi connection!
  There are different possibilities:
  The laptop uses the Intel wireless network adapter and the Intel Proset utility configures the WLan
  Or
  The laptop uses the Atheros WLan card and Atheros Client utility configures the WLan
  Or
  The windows have the option has been enabled and do this job.

  In this case ConfigFree application cannot configure and control the WiFi connection!

• Satellite A100-529: How can I enable the wireless network adapter

  Hi all!

  I'm new here, but I want to know how can I activate the wireless network device. On my Toshiba Satellite A100-529 keyboard is a Fn key that must be pressed with the F8 key to turn on the wireless network device. I did, but it does not work.

  What can I do to turn on my wireless device?
  Thank you!

  You are right. The FN + F8 key combination should be used to switch to the WLan card.

  But look, man. Have you checked if your laptop supports wireless network card?
  I think it does not support the minPCI wireless network card and the card does not exist!

  That's why the WLan card cannot be activated :) you know ;)

• HP laptop model g080nr: f12 button wireless stay orange won' find the wireless network

  After a update HP laptop does not connect to my wireless home button stay orange and I can't find my owner's manual to see what buttons to push with f12 to activate WiFi again, any help would be appreicated.

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you're not able to connect to the network wirelessly with your laptop

  Please read the tips and the steps below, find out what is relevant to your current situation and try

  by performing a few steps which could help solve the question

  1. check that the led wireless, try to turn on the wireless by pressing the wireless button

  2. check if Wireless [WLAN] is enabled in the BIOS

  3. check if you have yellow "!" mark or red ' x' for Wireless Adapter in Device Manager

  Note: make a right click on the adapter, uninstall the driver and restart the device [Windows will load the drivers again]

  4. check the last time wireless worked fine and perform system restore, reset the BIOS default setup

  pressing the F10 key in BIOS

  5. power OFF the Unit, remove the AC adapter / CC & battery, press and hold the Power button for 1 minute

  6. you can also download and install the last update of the BIOS for the unit on the Site of HP Support

  7 uninstall drivers Wireless Device Manager again, and this time download and re-install the drivers of

  the HP's Support Site

  8. If you use HP Wireless Assistant on your device, please uninstall the same and re-install again

  9. check if your wireless card detects any other nearby wireless network it, in this case delete existing wireless

  Profile and recreate the same

  10 incase if these steps does not resolve the problem, you can try removing and reinstalling the card group wireless

  Note: Please do this step only if you are comfortable doing

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• can not find the wireless network

  Hello

  I hope someone can help. Today, I got a new installed wireless router. Until now my main and most recent computer can connect to the internet fine (so I know this isn't a network problem), but my old computer does not find the network when scherching of available networks, it may pick up other networks and communicate with them simply not my own. It is the first time that I am trying to connect to this wireless computer.

  The computer is a HP pavilion t770.uk Windows xp sp3.

  You need to replace the network adapter. The current NIC is older than the specification of N, so it can not communicate with this Protocol.

  You can try to configure your router and the new pc to use b, if they allow.

• I installed Windows XP Home Edition. Can not find the wireless network drive

  I installed Windows XP Home Edition on my spare PC.  Now I have wireless network card in the computer and problems to find the drivers for it, and I don't know what brand it is, so I know it's kind of makes it harder too.  Then I also have to start the computer, but if I press F1, the computer starts well

  I was just wondering how can I get rid of this?

  

  Disable all devices that can connect to your router (wired or wireless)...

  • PCs
  • Laptops
  • Tablets
  • Smartphones
  • Smart TV
  • Printers
  • Networked storage
  • Another thing that I have not mentioned above!

  Put on your router and wait for the normal light distribution. Then turn on all devices.

  I hope that your ip address conflict went away. Generally ip conflicts can happen when the router is running again without doing the same with all devices later.

  If you have even an ip address conflict, it is possible that you forgot something above or can someone use your router without your knowledge.

  Your router's wireless network is secure? Ideally with WPA2 encryption?

  Tricky

• Impossible to install the wireless network adapter TP-Link on Windows XP Pro error "insufficient system resources exist to complete the requested service"

  Hello

  OT: I can not install my wireless adapter TP-Link on PC under Windows XP Pro. I continue to receive messages from "insufficient system resources exist to complete the requested service" after each reinstallation
  I had this problem since I moved into my new house two weeks ago. To my old place, my pc is connected to my router via a network cable, so everything was fine and dandy. However, to my new place, with a network cable is just not possible, so I use a usb wireless adapter to connect. I bought a TP-Link Wireless N USB Adapter (model TL-WN727N) and I can not installed.  First, I installed the software using the CD-ROM of resources which is come with the product then connected the adapter wireless on my usb port at the back of the pc. It detects the device very well, but when he wants to install the driver of this message displays "an error occurred during the installation of the device. Insufficient system resources exist to complete the requested service". When I opened my device manager, a yellow exclamation mark under Network - 802.11 n WLAN cards there. In this window, I tried:!. the driver update (latest driver same downloaded of the site Web of TP-Link) 2. Disable the device (nothing happens) and 3. Uninstall (which I just can't because another message "failed to uninstall the device. The device may be required to start the computer"is displayed). All three failed to install my wireless card. I am out of resources here, so any help is greatly appreciated.
  My PC specs:
  AMD Athlon (TM) II X 2 245
  2.95 GHz, 3.25 GB of RAM
  Windows XP Professional version 2002
  Service Pack3
  Thanks in advance.
  concerning
  gas

  T-Link support tried it yet?  http://www.TP-link.com/en/support/contact/