Operating temperature

Hello

What is the temperature of operation for the myRIO?

Can be used in sous-zero temperatures (-20 C, 0C)? The plan is to use it to record temperatures in a cold laboratory to calculate the heat loss.

I found the following specifications in the user guide:

Environment

To meet these specifications, you must operate the NOR myRIO-1900 with the window opposite the mounting surface and make sure there is at least 1 in. of clearance in front of the window during use.

Room temperature near device (IEC 60068-2-1, IEC 600682 - 2)... 0 to 40 ° C

Storage temperature (IEC 60068-2-1, IEC 600682 - 2)...-20 to 70 ° C

But what specifications will be affected by the temperature lower at 0deg C?

Thank you very much for the help!

Storage temperature is when the unit is turned off.

"This specification" refers to the specifications document as a whole, so if you want to run the myRIO at 0C temperatures, we cannot guarantee that will meet all the I/O specifications proposed in the document.

Tags: NI Products

Similar Questions

  • Update BIOS Portege 2010 / operating temperature

    Hello

    How can I update my BIOS when using Ubuntu Linux?

    The reason why I want to update my BIOS is on the one hand, Ubuntu
    writes an error during the startup and recommend to upgrade and
    the other hand, I fear that there may be a temperature problem, at least the
    laptop gets slower after working for a while.

    The laptop operating temperature usually is between 45 to 64 degrees.
    The fan starts running at 62 degrees and goes off to 52 degrees.

    The temperature seems to be pretty normal, I would say, but I think that it is not normal that the
    laptop gets slower when using above 50 degrees.

    I already opened it, it seems to be all right with the cooling unit, no dirt for example...

    Maybe I just persuade me I and the performance is quite normal for a PIII with
    866 MHz?

    Thank you

    Dear Julio

    I guess you know that Linux is not being designed load OS and BIOS update is created to be performed by running the Windows operating system. This beautiful Portege is known to me and I know very well that this is not the laptop the fastest and is designed for commercial purposes working with Office, electronic communication, and any other daily activity.

    Because of this can be the answer to your last question: Yes persuade you yourself.

  • What is operation temperature of the processor on your Portege R500?

    I have a laptop Portege R500 in series with processor U7600 and would * like to know what other users average operating temperature is for normal office use * i.e. Word processing, watching DVD/youtube, surfing the net, etc.

    I ask because I recently bought a used dock (port replicator ii) and also upgraded the OS on the laptop. It seems to me that there may be a problem, because under heavy use (compilation of software) performance appears to deteriorate on the machine - only solution seems to be turning the device off and leave it for a few minutes.
    Even when I don't have something heavy - such as typing this message, the CPU temperature lingers in the 1980s high (Celsius).

    I've seen on the forums that other people have had on this model of laptop overheating problems. My machine is about three and a half years of age. I opened and cleaned the fan in the air compressed and checked that it actually turns when turned on. However, I don't think a lot of air if I put my hand next to the exhaust, when turned on.

    Is someone can confirm if the exhaust is supposed to s u c k or expel air? Can you confirm your time average CPU? Anyone having problems with dock causing overheating?

    Thanks in advance!

    Can you please tell us what OS you use and what application you use to check the temperature of the processor?

  • Operating temperature safe mainboard? Mine is at 55 degrees C.

    I have a P6270Z under Win 7.  What is an operating temperature safe mainboard?  Mine is at 55 degrees C.

    Hello jlrtd,

    I don't see anything wrong with the temperatures you get. Ideally, you want to get temperatures too low you can go (as long as it is not cause condensation).

  • myRIO operating temperature

    Anyone know the operating temperature myRIO ideal/max? I'm working on launching a CubeSAT as object with different sensors, cameras, etc. in it in the stratospere via HAB. At first I was going to use it a bit from the Arduino and the RPI, but I then remembered that I had this just lying in my closet. Don't want to leave the nearly $300 to to lose.

    Hey jeremiahb,.

    It looks like the myRIO 1900 rΘation for 0-40 ° C during the operation and up to 2000 M altitude.  You can find these ratings in the environment of the 1900 myRIO standard section.

  • Error loading operating system after shutting down the computer because of the high operating temperature

    I decided to re - install Windows XP Pro x 86 on my wife's computer. So I went into the BIOS to make sure that the CD/DVD drive has been configured to start first, and then I inserted the DVD and then restarted the computer.

    Now, the XP disc started normally. I installed XP to the point where I deleted all previous partitions and then created a new. Windows then displays the warning that the computer would not be able to boot up to what XP finished installing. I guess that's because start-up files have been deleted when I deleted all previous partitions during the installation.

    Right after I clicked on enter the warning message, the computer shuts down. No! So, I try to re-boot, in the hope of all simply continue with installing XP, but instead, the computer will display a message indicating that the computer has been stopped because of the high operating temperature. I then go ahead and get a message saying: "Error loading operating system."

    No matter what I do, I can't go any further. I can't get into BIOS or anything. If I try the F10 key (or whatever the keys are), I get a beep. It does not properly respond to my entries.

    I don't think that the high temperature operation destroyed all components. The computer stopped several times in the past. Furthermore, it would not be part of integrated security if Microsoft enabled the computer reach a destructive temperature before stopping. I think that the problem occurred during installation was interrupted just after that previous partitions have been deleted.

    BT, I don't know what to do now. Loooking for suggestions.

    Hi Diadem1981,

    You can follow this link completely & check if the problem persists.

    Error message "Error loading operating system" when you restart your computer during installation


    Reference:
    How to install or upgrade to Windows XP

    Hope the helps of information.

    Please post back and we do know.

  • Operating temperature of A1310Y

    Does anyone know the favorite operating temperature of the motherboard (CPU) in 'normal' domestic conditions (about 75 degrees F)?  Both at idle and when you do 'normal' surf (not graphic intensive games).  I am trying to determine if my system works abnormally hot.  The fan seems to come at high speed than normal.  It is not a problem of dust - I thoroughly cleaned it.

    Update: the opportunity to make a complete analysis of the system today.  CPU was pegged constantly around 100% load.  CPU temperature reached 146 degrees F.  Room temperature was 75 degrees F.  CPU fan stayed from time to time (1500 rpm): all 'low '.

    Arctic Silver, tinting and place the CPU fan to blow air over the radiator certainly contributed the a1310y to run cooler.

  • Dell XPS 15z: "your battery is temporarily disabled. If please shut down your computer and try again when the unit is in the operating temperature"

    Hello

    last night, I was working on my laptop, I realize that my battery is low. so I put for loading... after a while, I realized that the battery is 75% charged so that I disconnect it. and my laptop turns off.

    the laptop refused more late start... therefore I reconnected it the charger and the laptop turned on with the light that displays the State of charge (white light near the intersection of the keyboard screen) starts to blink in a cycle of 5 times... 4 times orange and 1 white time... and this cycle continues until I use the laptop.

    and this message when I go to THE BATTERY option "your battery is temporarily disabled. Please shut down your computer and try again when the unit is in the operating temperature"my cell phone is outta warranty... what should I do? kindly help

    hchentanshankar,

    Welcome to the community.

    I am sorry to read that you are experiencing this issue.  The battery is likely guilty, but you should check to see if there are any problems with the laptop or AC adapter / CC before you rush out and replace the battery.

    I would start by checking the bios, boot the system by pressing F2 to enter the bios, you can also press F12 and select the bios menu.  Once in the bios look for the option for AC adapter warnings, if they are disabled they can and save the changes. If there is a problem with the adapter, you should start getting errors on the adapter.

    If the adapter seems well, disconnect the battery from the system and turn off the laptop.  Wait an hour or two and then replace the battery and restart the system and see if you continue to get the message.   If you can run the laptop on battery only to leave the battery completely and then load it again and see if the problem returns.

    I know that this may not be possible before you buy a new battery but if possible try a power adapter and the battery and see if the problem persists.  In this way, you can know if the problem follows the laptop battery or the AC adapter.

    Please let me know what you find.

    TB

  • Portege 3500 operating temperature?

    Hello

    My Portege 3500 crashes regularly (the monitor continues to show what was the last one on the screen, but no entry is accepted, not even ctrl-alt-del) I have to hold in the power button until the laptop turns off to restart. I think that this could be due to overheating and try to check it out using speedfan to monitor temperatures.

    Does anyone know what temperature ranges are acceptable for the 3 temperature gauges that speedfan reports (Temp Local, remote Temp and Temp1)?

    Thank you
    -Jason.

    It's not easy to say what temperature is acceptable. On my laptop, I recorded about 60 ° C and everything run ok.
    I assume you are using unit for a long time as well as the fans have not been cleaned.
    You can try to do. But be careful. If you have no experience, you shouldn't have t do.
    Additional you should always be sure that there is enough free space around the laptop for cool air circulation.

    PS: you may install the Everest application. This tool provides a lot of information on the entire system.
    After cleaning, you can compare the temporary values

  • Correct operating temperature of Y410P?

    Hi all

    I have a problem on what is the right temperature of work for Y410P? Mine is about 50 c idle and about 80 c on the GPU by doing a game. I play in air-conditioned unair emviroment, room temperature is around 31-33 c. Is this really?

    Thank you

    For ambient temp of 31-33 C, your laptop is GREAT. Your ambient temp is high for a laptop.

    I advise you to use a good portable cooler and external fan showed up on the laptop in order to circulate the air. (If you can't move to an air-conditioned room)

    I have the same setup and my laptop still works at 45-50 nomral, its 3 years now. The game max GPU temp is 75-76 and 80 CPU (due to Turbo boost)

  • Normal operating temperature slowed for Lenovo Yoga 13

    I have a Lenovo Yoga with an Intel i5-3337U 13. I noticed it seems to get a lot more hot recently (feels good), and so I installed coretemp on the ultrabook to know what the idle temperature.

    It seems average 47 c idle.

    I was wondering if it's inactive average temp for this model of process / laptop.

    If someone could give me some information, also declare their temperature as well, that would be great!

    47 is very good, don't worry!

  • Normal operating temperature - A31 2.0 Ghz

    I do not understand how the designers Never thought that a machine that has only 80cm away from your ears can have a fan that it audible.

    However, I try to use Thinkpad Fan Control (v0.18) to minimize my fan activity. Remove the battery or the BIOS setting to low speed 'aid', but also means a higher load and therefore more heat!

    I don't know if the temperature of the CPU slowed down without the fan turning is normal around 58 C. With the fan in BIOS mode, there are about 42 c, but it still seems quite high to me. Is it possible that it needs new paste theral or the heat sink is not well defined?

    Check if you have the latest BIOS/EC on the A31, which could be part of your problem.

    Also, try running a newer TPFC (0.33 to 0.62) and see what it does.

    Having said all this, cooling has always been a weak point on A3x units first...

    How many process - once more - you have running on a freshly booted XP?

  • normal operating temperature for ms 7548 mobo

    I have a mobo msi that performs 100 c all the time, two fans of case, 550 new power and replaced all bad caps on the Board of Directors (had a pro do it). Gesture doesn't work, just stays at 98-100 ° c. Checked temp on Speccy, everything else works in the years 20 down. Any help would be appreciated.

    hasselk wrote:

    Scan of Cupid says systin 98c, cputin 30 c, auxtin 86 c. ax time are respectively 98c, 68(c), 176c... hope that helps. Thank you

    lI would trust these numbers more than Speccy.

    They seem to be in a normal range and as a precaution, please see this article on heat reduction.

    http://support.HP.com/us-en/document/c01657439

  • Operating on Satellite A100 temperature

    Hello

    I have a laptop Satellite A100 - 237 (PSAA9). I recently updated my BIOS of 1.20 to 2.00 because the unit cannot detach confirmation. After the update, I noticed that the fan of the laptop is still at the average speed to high independently operating environment, CPU load, etc.. It keeps spinning and spinning and my CPU temperature is much higher than before, still at about 57-58 C.

    Now, I don't have a clear idea what, exactly, are the limits of the operating temperature normal for my CPU (Centrino Duo 1.83 GHz) but I guess 57-58 C is a little higher. I do not suffer slowdowns or spontaneous reboots or the camera, the unit performs all also large, but heat becomes distress after a while and I'm afraid that I can run in VERY SOON heat-related problems. The unit cools pretty quickly - down a bit - and when I put it to sleep, but after session restore heat accumulate again. In addition, the heat is more visible on the left side of the device, but I think is quite normal that the CPU and the HARD drive is located on the left.

    I bought my camera in August and have not been cleaned once again. I should get cleaned CPU fan? Wouldn't be of any help?

    The temperature of the CPU of 57-58 C is not uncommon. It s a normal life. I guess the CPU temperature can increases to 70 ° C when performance heavy as 3D or games software is running.
    Of course, it s advisable to clean the fans from time to time.

    But what about Toshiba Power saver settings? Here, you can change the CPU speed treatment and cooling modes.

  • Best practices: room temperature?

    We are negotiating with our neighborhood on what is ideal and preferred room temperature for our mac Labs.  I found a thread on the hour but it is specific to the valleys and I was wondering what was the ideal room temperature for keeping our laboratories.  Is there an official Apple SOP on that?

    "temperature is between 20 ° C / 68 ° F and 26 ° C / 79 ° F, with an average at about 23 ° C / 73 ° F.". Whatever it is above 27 ° C/80 ° F is potentially harmful to your computer. »

    Thank you

    Fact

    Mac Pro temperature Questions

    See the commentary by a brody

    and thread

    KMB kmbp: how to deal with the MacBook Pro and MacBook heat?

    See also

    http://computers.tutsplus.com/tutorials/keeping-your-cool-with-Apple-Mac-operati ng-temperatures-mac-52077

    Apple laptops

    Mac Laptops: Apple Support operating temperature:

Maybe you are looking for

  • Calendar cards Gets the wrong location

    If I open Maps, type in a destination and set it to go home' - it does - no problem. If I set a location to the calendar and travel time from home' - again - the arrow. But... Click on the graphic of map of the calendar to open cards, and suddenly I

  • Programmatically change the sampling for AO / DO

    Hello I'm doing some AO / DO with a few tips, PXI, including a series PXI-6221 Mr., I wonder if it is possible to progammatically change the sampling frequency at a certain point in time. After awhile my program between a low-maintenance lifestyle an

  • The differences Multisite and Multiway conference

    Hi all Can you tell me what are the multi-site and multiway conferences? Also, what are the differences between these conferences?

  • Remote Desktop for the external IP address is no longer works

    Hello and thanks for your help. For months I could access my desktop from my laptop (via Remote Desktop) / Tablet (via PocketCloud), both inside and outside my network. Recently, the external IP address for my router has changed. As this happened, I

  • Reinstall: HP Setup Manager Wizard.

    When I open the HP Installation Manager and go for Support, I see a "error occurred" near the HP Total Care logo with yellow and green hands. If I can reinstall this program or how can it be solved? Thank you