Optiarc bd rom will not read bluray after upgrade to windows 7

Similar Questions

• CD/DVD-Rom will not read the CD

  I just upgraded from vista to windows 7 Home premium database on my laptop and now my CD-DVD-Rom will not read any CD I put in the drive. He reads that DVD very well so I'm up for a loop now. My drivers are all far better that I can find. I know it's a CD-DVD-Rom, because before I updated I had no problem reading CDs and DVDs. This is a problem because all my anti-virus and other programs are all on CD. I don't know how to fix this. Any suggestions would be greatly appreciated.

  -Thank you

  Thanks for the post with suggestions. I have tried it all and still had the same problem. I called Dell and got the laptop computer and an hour with a tech restarted my computer and try to fix it, they decided that something in the upgrade process damaged my CDRom and they sent me a new to replace my current one. I'll get it Tuesday and weather post or not, that is the question. Just in case where there are other people out there who might have the same problem.

  -Thank you again for your help

• iTunes will not open even after reinstall on windows 7

  iTunes will not open even after reinstall on windows 7

  Hello mamaKAT,.

  Read the Apple article listed here:
  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
  http://support.Apple.com/kb/TS1717

  If this does not help, you should contact Apple support or post in the Apple discussion forums.
  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• CD rom will not read after inserting cd

  my cd rom always worked I had not used it for about 4 months. I tried all my CDs in it will go perfectly, but nothing happens after that it does not read that I have vista Home premium desktop. computer is a dell 2007 suggestions?  Thank you mary

  Hello

  Try this to see if the drive is viable at all.

  / Settings (BIOS/CMOS) often F2 then watch the display as you launch - set initialization
  order on CD/DVD first. Don't forget to when.

  Try to start a Windows Vista repair disc, and or a Linux boot disk.

  If the player does not start to these then it has failed, or other hardware issues
  which affect it. However, even it doesn't start that does not mean that there are not a few possible
  other features of the material problems affect the reader.

  The rest of the message is a response above.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• SlimType BD E DS4E1S will not read discs after windows update

  My laptop has a Slimtype BD E DS4E1S drive.  After doing upgrades with windows 7, it can now read all disks.  All MS suggests tried, but nothing has worked.  Don't ask, discs have been read in the same drive, before this problem started.  The computer is only a couple of months.  This utility shows no problem with the drive.  It just keeps telling me to insert a disc, such that no disk is detected.  Already tried changes to the registry (MS) and uninstall, reinstall the driver with no result.  Any suggestions?

  Hello

  I suggest you to wait for the manufacturer of your computer, ASUS responds again to you. It's a hardware problem and I suggest you contact the manufacturer of your computer for assistance.

  Kind regards.

• my laptop will not turn on after a recent windows update

  Windows recently did an automatic update on my laptop and need to reboot to complete. However, it will not turn on at all now. I tried to run the install disc and used to attempt to repair my system and yet it is said that it is not repairable. Ive also tried to restore to a previous point, and yet, he won't do that. Help!

  Hello

  1. the updates are was?
  2. what exactly happens when you try to start the computer? You get the error message?
  3. What are the error messages that you receive when trying to run the system restore or Startup Repair?

  Step 1: Use the option last good Configuration see and check if you are able to boot to the desktop.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Using-Last-Known-Good-Configuration

  Step 2: Check if you are able to boot into safe mode and send back the same.

• Satellite P770-118 - cannot read DVD after upgrade of Windows 8

  Hi, after installing windows 8 and put the Toshiba bios update, Ive found that the Blu-Ray/DVD will not work.

  Trying to find support on the internet is a nightmare can anyone help?

  Thank you

  Hello

  Check it please this Toshiba document - http://aps2.toshiba-tro.de/kb0/FAQ2B03F10002R01.htm
  Maybe this will help.

• HP940c does not web print after upgrading to Windows 7

  recently unclassified HP Pavilion 9500 from Vista Home Premium to Windows 7 Home Premium. After upgrade, can no longer print to Web sites - using IE 11.0. Before the upgrade was using IE 9.0. Tried to print from multiple sites by using the function "Print" in the "Tools" button Was able to copy information Word doc Web site and print it from there. All ideasas to problem?

  Hi twf42,

  Thank you for being an active member of the HP support forums.  I understand that you have an impression of Internet Explorer 11 problem on your Windows 7 computer.

  I have included a link in Microsoft Internet Explorer required 11.  Microsoft says IE 11 runs only on computers running Windows 8.1 or Windows RT 8.1.

  Microsoft Internet Explore 11 system requirements

• CDDVD rom will not read the dvd rom or DVD

  my cd/dvdwrighter reads only cd rom not my dvd rom or DVD

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• DVD rom will not read the original (only) dvd.

  There is a message that says that it can not switch on analog copyright protection and a new driver must be installed. I don't know how to do in this regard. He used to play anything, and this problem only occurred after someone tried to install software for the 3D map. The operating system is Windows 7 Service pack 1. Kindly help.

  There is a message that says that it can not switch on analog copyright protection and a new driver must be installed. I don't know how to do in this regard. He used to play anything, and this problem only occurred after someone tried to install software for the 3D map. The operating system is Windows 7 Service pack 1. Kindly help.

  ====================================================
  If it is a recent issue, it may be worth trying to do
  a system restore to an hour before the beginning of the question.

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  More info...

  The free VLC Media Player may be worth a try...
  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.7 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.7 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• VMware Server on windows 7 host, will not autostart invited after upgrade to vista

  I have upgraded vista to winodws 7.  I had to reinstall vmserver 2.01 for networking.  The last problem is that Vmserver auto start the guest.

  I changed the options for start/stop of the virtual machine settings.

  

  This worked under Vista 32-bit, but not under Windows 7 RTM 32-bit.

  any ideas?

  I am currently using vmrun to start from a batch file

  Follow-up: I could get this to work, although the causes escapes me and the fix is not pretty:

  1. Remove VMWare Server

  2 remove folders vmware related in c:\program files (or installed path)

  3. manually remove all references to "vmware" of the registry

  4 reboot.

  5 reinstall the server vmware to the default locations.

  I tried everything but the manual registry clean.  (Standard warning blow your system here)  Once I did this and reinstalled, now auto-start for clients with the host properly operating system.

  I hope this helps someone else.

• Acer Aspire M5-481TG - card reader does not work after upgrade to Windows 10

  Hey!

  I can't get my card reader works after upgrade to windows 10 64-bit...

  Device Manager gives me return error Code 48, tried to install different drivers, I have found for Realtek PCIE Card Reader... None of them work...

  "Code 48: the software for this device has been blocked from starting because it is known to have problems with Windows.

  Have you ever tried the Realtek website?

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  Please uninstall the driver installed before installing this, on right click Device Manager, choose uninstall, and check the box uninstall the software too.

• No CD/DVD drive after upgrade of Windows 8 on Satellite Pro S300L

  The cd Rom drive no longer works after upgrade to Windows 8.
  The drive is not displayed in the Solution Explorer, either. It is mentioned: error in the register.

  I can not change the right driver in Device Manager - probably it was deleted.
  Is the driver of the * MATHSITA DVD-RAM UJ880AS drive * for Windows 8 available?

  How can I make my cd Rom drive working again?
  How can I fix the error?

  Could guide you me in registry change (upper and lower filters) if necessary?

  Post edited by: GRIX

  Hello

  Check please follow thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=68988

  Here, you can find the solution to your problem.

• Carpet * a DVD-RAM UJ-820 s will not read the cd rom cd-rom dvd

  OK, I read the other posts on these discs. Mine will play DVD movies and play them. It will not read the dvd ROM CD CD-ROM etc.
  This cannot be a hardware problem, it must be the software should not it?
  Can anyone help?
  Does anyone have information on how to remove these disks of the computer? Im sure I can install a new one myself if I really need to.
  Unfortunately the computer is just out of warranty

  Hi Robert,.

  Unfortunately, your problem sounds like a problem with the hardware with the optical drive. The player itself must be able to refocus its lenses to switch between DVD and CD formats, and also to pass the pressed DVD and DVD burned.

  I suggest you tyre remove the device from the Device Manager Control Panel, then restart your laptop so that the optical drive will be recognized as a new component hardware and Windows will then be re - install with standard drivers etc. If this does not work then it looks like a new drive will be necessary.

  Unfortunately you say not what model of laptop you have (the removal procedure is not the same in all cases), but in general if the car is equipped with in-house it is held in place with one or two screws accessible from the bottom of the laptop that should be removed first, then the optical drive can be slid out of its location.

  Kind regards

• DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive

  Original title: Dvd rom problem

  Am running windows XP. DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive. Any help out there?

  Hello

  1. When did you start to question?

  2. did you of recent changes on the system?

  3. you receive messages or error codes?

  You can check the following link and try to run the Fixit and check.

  Your CD or DVD drive cannot read or write media