Optiarc cd - rw crx880a ata device will not recognize any cd

Similar Questions

• Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

  I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

  Thanks in advance.

  Hi quietly,

  If your CD/DVD drive doesn't work, how do you have a system restore?

  Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

  Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
  Check this box!

• error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

  error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Driver TSST Corp CDDVDW TS - L633L ATA Device will not load. The problem code is 19 / how to fix?

  HP Pavilion dv4
  TSST Corp CDDVDW TS-L633L ATA Device

  Control Panel / problem report and solutions
  Problem: Could not load software driver status: sent report

  Description
  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 19.

  Signature of the problem
  Problem event name: PnPDeviceProblemCode
  Architecture: x 64
  Hardware ID: IDE\CdRomTSSTcorp_CDDVDW_TS-L633L___0400___
  Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
  The PnP problem code: 00000013
  Driver name: cdrom.sys
  Driver version: 6.0.6002.18005
  Driver date: 11/04/2009
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Additional information about the problem
  Bucket ID: 619663520

  Control Panel / Device Manager
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried:
  Update driver software
  Uninstall / find the hardware changes
  Uninstall / reboot / new hardware found
  Properties / verification solutions

  How can I fix it?

  Hello

  Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  You have to restart the laptop after that.

  Kind regards

  DP - K

• Computer will not recognize Pro Duo or removable drives.

  Computer Vista will not read my Pro Duo chip, or it will show all removable drives except ROM USB where I have an optical mouse wirelesss connected (when I check my computer).  The import wizard shows only a USB where prior that he showed, f, g, h, etc.

  Thank you.

  Thank you for these two answers, unfortunately the first did not work, and the second deals with USB.  The computer will not recognize any location chip memory, they do not appear on the Import Wizard, or MY computer.  The only two drives that appear are drive C and drive J, which is where I have a wireless mouse hooked up.   Just before this problem I had... and still not... a bottom of screen message "one of the USB devices attached to this computer has malfunctioned... Click this message for more information."  The only connected usb is the mouse, and it works fine.  Solutions that deal with USB issues aren't really questions I have, except that in the future (if the problem remains) USB ports do not appear on my computer either.  Someone who has some said knowledgge I need to re - map the hard drive, or something?

  I really appreciate the time you people consume with it.  Any other ideas?

• Dynadock - USB Port Replicator does not recognize any USB keyboard

  Hi can any body help?

  I have a Satalite pro L300-154 with a Dynadock - Replicator to USB Port, but it will not recognize any usb keyboard.

  Have you checked if the laptop would recognize the external USB keyboard connected directly to the computer laptop s USB port?

  Please check this!

• Error code for driver Optiarc CD - RW CRX880A ATA 19

  I have an Optiarc CD - RW CRX880A ATA driver, recently, I couldn't use any disk, I watched a lot of pages different forum and tried to delete the UpperFilters and LowerFilters in the registry, but miss me the LowerFilters for whatever reason, any way I could fix this?

  It is copied directly from the driver properties:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
  (no solution at all)
  I have an Optiarc CD - RW CRX880A ATA driver, recently, I couldn't use any disk, I watched a lot of pages different forum and tried to delete the UpperFilters and LowerFilters in the registry, but miss me the LowerFilters for whatever reason, any way I could fix this?
  Thank you

  Hello

  Please make all these even if you've done it before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. If the drive does not appear, continue below.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support

• Satellite Pro L10 - USB port will not recognize devices

  Hello

  I got a L10 for 18 months. Under the guarantee, I got a replacement motherboard mounted. Everything has been ok so far. A USB port will not recognize devices, a port is ok, but randomly turns off a device attached to it and comes up with the message "USB device not recognized". The third port is ok all the time.

  Any solutions or suggestions?

  Post edited by: caddy

  I guess there is not enough power on the USB ports and external devices may not work correctly. It is not easy to say why this happens, but there may be a problem of welding.

  I recommend you contact the service again as soon as possible.

• T520 will not use any device DVD

  People,

  I was going to do a backup, when I noticed that the DVD player was no longer under my computer.

  I when in Device Manager, where he showed with a yellow X... I tried to update the device driver, it said that I had the right device. I've done many other things - nothing has worked.

  I really wanted to get the backup made, so I took my portable DVD player/burner and plugged. The laptop computer found a loaded device OK... but it does not appear in my computer. I had the same problem as the DVD drive internal.

  Then I got a USB drive external Passport, connected to the same USB port, no problems... He mounted the disk and I made the backup.

  My T520 will not use any device DVD... ideas?

  -Fred

  I did a quick search and voila. See the Windows 7 box.

  http://support.Microsoft.com/kb/314060

• BlackBerry Smartphones after upgrade attempt for 8310, device will not - restart only flashing red

  Problem: I tried to upgrade the software of the device to 4.5 and now THE DEVICE WILL NOT RESTART at ALL. Not with a hard reset. Not using the SIM card and the battery of my 8310 and put in his. Nothing. Just a red light that flashes in a model: two quick flashes then pause; two quick flashes then a pause, etc.

  Reminder: This 8310 got to. 4.2.2 software device and something like 2.6 on the desktop. I have downloaded/upgraded to 4.6 for the office and 4.5 for the device since the AT & T site. The Director of office prompted me to install the new software for device... good. After a few minutes, I get an "unknown error" message and it stopped the installation. Following a support article, I uninstalled reinstalled two updates, but then the problem occurred: NOTHING happens on the screen of the device at all, just the red light flashing when the unit is plugged.

  The AT & T store told me that it's the tenth 'dead' curve he is seen in about a week, apparently all occurring when people tried upgrading the software. All the thoughts/help to offer?

  Help, please!

  Check this instruction:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

• Windows 7 will not recognize driver for HP Scanjet 5370c scanner

  I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

  Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

  Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

  http://www.Hamrick.com/

• Tecra M1 will not read any type of SD card

  Help!
  According to the title, my M1 will not read any type of SD card. I'm running the SP2 of XP reloaded from original floppies, and it is fully up-to-date with Windows Update.
  The little green light adjacent to the slot flashes briefly on the insertion of a card, but nothing happening for example no open option window and nothing visible in my computer.

  I downloaded the latest drivers and installed according to the directives of the readme.txt file and even thought to copy the SDDEVMGR.dll in the System32 folder.
  I obviously lack something, so any help or pointers are welcome.

  Thank you very much. Craig

  Hello

  Usually, books are not all sizes of SD card and so you should be sure that the used SD card is supported and compatible with the Tecra M1 card reader.

  But if you are using a compatible SD card the laptop should be able to read/write on the SD card.
  I try to remove the SD card in the Device Manager controller and remove the driver software malfunction. Restart the computer and install the latest drivers again.

  PS: A registry cleaning would be desirable. CCleaner is a great registry cleaning applications

• File Manager XP PRO SP3 will not recognize USB floppy A: drive

  File Manager XP PRO SP3 will not recognize USB floppy A: drive

  The system tray alerts "new hardware found" and "installed".

  In the system. material | Device Manager | floppy drives, the disk is present, activated and works

  If I pay BACK the drive is located and can be read and written.

  The drive is not the case in (windows explorerer file manager.

  The drive is not present in administrative tools. computer management | storage | removalable storage | libraries.

  In the removable storage service is started.

  If bottom line, the usb floppy is a material recognized, works under DOS, but there is no access to XP.

  This happens with two floppies different usb connected directly to a laptop (not a hub). When connecting to another XP computer, the disks are immediately recognized in the file manager and work as expected.

  Any ideas?

  It's embarrassing, BUT I solved the problem by using TweakIU. It seems that in the workstation. The floppy drives were not verified. Verification of A & B readers did the trick.

• Fuze 4 GB will not recognize the change of information tracking

  Right then, I had some problems with my Fuze MP3 player. When I download the new music on the device, the ID3 tags all come out the way they are supposed to. However, if I remove the music that is on the drive and replace it with the same tracks with ID3s update, it will not recognize the change of title, album, or artist, if the song file will be updated. I know because I had problems with the songs with the same name or accidentally given songs the name of another song, which resulted in incorrectly labeled music.

  I tried to format the drive, I tried to remove the music manually in the file system, I tried to change the USB mode and delete the file that I said holds the ID3 data, and I tried all the possible permutations of disconnection and let the Player recognizes the changes. This includes the removal of all the music in the player, disconnection of the latter, confirming that there is no music on the system, to change the USB mode, deleting the file with the ID3 information, turning the rear USB mode, reconnect, put my music on the device, and the problems have not been resolved.

  It is likely, it is just to be fickety, and there is something I'm don't is not right, but it's the second "rocket" I've owned - I love the model and went up to return a Fuze + in favour of the former model - and one has never had this problem. I'm willing to try anything within reason to solve the problem, so I hope someone can point me in the right direction.

  In fact, the problem was not as expected at all. I think it turns the problem is Windows Media Player, which I only use to sync my music on my MP3 player, had a library with outdated information. So after the Player update multimedia, I refreshed my library recordings and everything worked as you wish. I just to make sure that if I make changes to existing songs in my library.

  Thanks for all the help, guys, guess it was on my end.