Optiarc DVD RW AD - 7560A ATA DEVICE cannot read the disc when inserted

Similar Questions

• Optiarc DVD RW AD - 7560A ATA DEVICE cannot read the PC DVD - ROM.

  I have sony vaio VGN-NR38S. It has a Optiarc DVD RW AD - 7560A ATA DEVICE.

  A few days ago I bought a DVD of driving test. I can't use this DVD in my laptop.

  I tried this DVD in other laptops and it works perfectly, but when I insert in my laptop, it says "Please insert the disk".»
  could someone help please.
  Thank you.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  =======================================

  As needed check with the Sony Support, their drivers and documentation online and ask in their forums
  on the problems known.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Optiarc DVD RW AD - 7640 ATA Device cannot read DVD

  When I insert a CD or a DVD, Windows Vista does not recognize the disc. If I double-click on the disk drive in Windows Explorer after that I insert the disc, I get the following error message:

  Insert the floppy
  Please insert a disk in the drive ( DriveLetter :).)

  Help, please.

  I tried everything that is published in previos sections but nothing works.

  Hello nikasru,

  ·         Your DVD player was working fine at all times before?

  You can try the below link which will automatically diagnose and repair problems with your CD or DVD drive trying to read or burn media.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Re: DVD of the (optical) drive cannot read a disc when inserted.

  Hello everyone.

  MY DVD drive can not read a disc when inserted.

  When I check the Device Manager, it has the following against the optical drive error message:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  How can I solve this problem and fix it for free if possible? Download a patch from the website of toshiba?

  Your help is greatly appreciated.

  Mark

  See also http://support.microsoft.com/kb/314060/en-us and post comments.

• Optiarc DVD RW AD - 7560A ATA DEVICE do not work

  My CD-ROM/DVD-ROM does not work.  Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
  1 device state poster (this device cannot start. (code 10)).
  2 update driver... shows that the best device driver software is already installed.
  3. it is the driver of manufacturing.
  4 driver provider Microsoft Driver version - 6.0.601. 18000, manufacturer-(Standard CD-ROM drives)

  Hope that enough information... Oh, my computer is computer laptop Windows Vista Service Pack 1, Sony VAIO - VGN-NR22OE.

  Grateful for any advice...

  Hi Nikki 801,

  Can you please try these steps?  Be very careful when you edit the registry.  If you would please do not delete anything immediately.  If you must please the following steps... If upper and lower filters is not in this registry key, simply leave the registry.

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

  1. Click Start
     Collapse this includes this image

     

     type regedit in the Search box, and then click regedit in the programs list.

     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

     Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

  3. In the pane, click UpperFilters, and then click Remove.
  4. Click Yes to confirm the deletion of the UpperFilters registry entry.
  5. In the pane, click LowerFilters, and then click Remove.
  6. Click Yes to confirm the deletion of the LowerFilters registry entry.
  7. Exit the registry editor and restart the computer.

  If you please you would follow with me as best as possible, I'd be very happy.

  Thank you

  Aaron Griffin
  Support engineer
  Microsoft technical support

• Optiarc DVD RW AD - 7560A ATA device no longer works, "Code 19" referring to information from damaged or incomplete prevents widows to start this hardware device.

  Tried updated driver and the Microsoft Automated Troubleshooting service who could not solve the problem. If I put a disc in the DVD tray with the intention of reading, you can hear the disc for about 20-30 seconds then silence analysis. Never, AutoPlay opens the disc. Help!

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Please start from the top and do ALL this, although you could have done some before as is often the
  all operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. If the player does not then continue to the next step.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• DVD Region, Nochanges remaining, Stuck on region 1, material is Optiarc DVD RW AD - 7560A ATA Device in a HP Compaq Presario C700

  Help can not read the DVD in my area, how can I change the ITI now or not at all.

  Hello

  It's design is if the region has been changed 5 times or more:

  DVD region information
  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  DVD region code
  http://en.Wikipedia.org/wiki/DVD_region_code

  You can buy devices that claim to be region free and software that claims to be able to
  other regions to read even if I have no experience with those.

  Region Free DVD Player Information
  http://www.dvdbuyingguide.com/codefreedvd/Codefree-FAQ.html

  Region Free & Code free DVD player information
  http://www.dvdbuyingguide.com/codefreedvd/bigfaq.html

  Forums - a lot of expert real help
  http://Club.myce.com/

  I hope this helps.

• device driver was not installed optiarc DVD RW AD 7581 ATA device

  Graduated fron windows vista home premiun, Ultimate and optiarc dvd rw ad-7581 ata device will not work. How can I fix it?

  Hello

  Check with the Maker system and/or the manufacturer support and Forums real player
  (if any). There is no reason for the reader who has worked on Vista HP does not play
  on Vista Ultimate.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The error that says it cannot read the disc.

  I installed a CD using Windows Media Player AutoPlay as my default for audio CD the 1st song plays, but when I select the next song, I get a red X icon and an error saying the disc cannot be read and it climbs to the 3rd song. So, if I select another song, I get several red X icons on several songs. It happens with all prerecorded CDs that I install. The disks are clean and new and everything worked fine before, but I had my Windows Vista Home Premium reloaded recently. I don't remember if the player has worked properly for reloading. Why can it read well enough to still play some songs if it cannot read the disc. I'm getting confused. Can someone help me sort through this and help me make it work? I'm not too computer, so be gentle. Thank you... Dave

  I installed a CD using Windows Media Player AutoPlay as my default for audio CD the 1st song plays, but when I select the next song, I get a red X icon and an error saying the disc cannot be read and it climbs to the 3rd song. So, if I select another song, I get several red X icons on several songs. It happens with all prerecorded CDs that I install. The disks are clean and new and everything worked fine before, but I had my Windows Vista Home Premium reloaded recently. I don't remember if the player has worked properly for reloading. Why can it read well enough to still play some songs if it cannot read the disc. I'm getting confused. Can someone help me sort through this and help me make it work? I'm not too computer, so be gentle. Thank you... Dave

  =====================================
  Intermittent problems can be complicated to solve but it
  seems that you have a hardware problem with the
  optical drive. The player may require, cleaning service
  or replacement.

• When I place a disc in my CD - DVD player, it says that it cannot read the media.

  I use a Windows 7 computer and everytime I put a DVD in the drive, it says that it cannot read the disk media. I tried to uninstall and reinstall it, I also tried the Player update. The computer realizes that the drive is in the computer, but it will not play any DVD or CD. Anyone know how I can get running without having to disassemble the computer?

  Clean the disc with a DVD cleaning disc, available in most stores and retail businesses.  If this fails so that the reader has probably not and must be replaced.

• Not possible to burn a DVD-tells me that it cannot read the disc

  What do I need to get windows or any other media player to burn a dvd movie cause that he told me that it can not read the disc. If someone can tell me what I please

  The only version of XP that included the possibility of creating a
  DVD-video is Windows XP Media Center Edition 2005.
  What has been consulted through Windows Movie Maker and
  was not shown to be extremely reliable.

  Beyond that... you need DVD Authoring software. The
  following freeware is an example:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Cannot read the disc for dragon 11, but will read and download dragon 9

  I can install version 9 of Dragon, but when I tried to upgrade to Dragon 11, it wouldn't read the disc of Dragon 11.

  I checked the disk on my laptop, and read 11 Dragon, she could not install the software for cause of memory.

  Hello

  · Another CD/DVD is getting recognized on the computer?

  Here are a few options you can try:

  1. you can download Dragon 11 on the manufacturer's Web site and try to upgrade.

  Link for reference: http://shop.nuance.com/store/nuanceus/DisplayHomePage?resid=Tj5UDQoBAlYAAAT0MkUAAAAD&rests=1312707596649

  2. install the application of the dish:

  a. Insert the Setup on the laptop disk.

  b. start Windows Explorer.

  (c) in Windows Explorer, click to select the drive for the installation disc.

  d. in the Edit menu, click Select all.

  e. in the Edit menu, click on copy.

  f. and paste it into an external USB drive or a USB flash drive.

  g. plug in the drive to the computer where you want to install Dragon 11

  h. on the file menu, point to new, click folder, type Setup 11 Dragon, and then press ENTER.

  i. double-click the folder and then click on paste on the Edit menu.

  j. double-click Setup.exe, and then follow the instructions that appear.

  You can also access: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

• Windows cannot read the disc in the drive F:\

  Hello

  HP laptop with Windows 7 Home Basic 64 bit, I bought the CD room worked well and I did not use the CD room for a long time so I inserted the blank CD and when I had just the triad to open the CD drive f:\ he says «Windows is unable to read the disc in the drive F:\» "and when I triad to burn the image on CD, it says"Windows can not burn the image drive f:\, please insert a writable disc in drive f:\. "and I triad to see if GTA IV Episode From Liberty City CD will work or not it worked but did not show the CD icon and the Autorun does not work and I tried other CD and I had the same problem that the autorun does not work and no icon for the CD.
  Here are some pictures:
  http://imgur.com/a/2vTXl#0

  I knew how to fix it

  Here is the http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-does-not-recognise-a-blank-disc-in-a-dvd/d6bed94f-c9df-45fd-9a54-51d5d5575b91 solution.

• Optiarc DVD RW AD - 7560 ATA device stopped working, code 39 how and what to do?

  IM using pc acer 4920 have been awhile this optiarc DVD RW AD - 7560 A ATA device no longer works with code 39. I your ipinion, thank you! xxx

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• error 39 for optiarc dvd rw ad - 7503b ata device windows Vista

  My optiarc DVD RW AD - 7530B IS NOT WORKING in WINDOWS VISTA

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">