Optiarc DVD RW AD - 7560A ATA DEVICE cannot read the PC DVD - ROM.

Similar Questions

• Optiarc DVD RW AD - 7560A ATA DEVICE cannot read the disc when inserted

  Cannot read any disc, I put in the drive.  I tried to uninstall the drive and restart without result. I also tried the upper and lowers them retreat to the registry and nothing. Ive tried the fix from microsoft and it is unable to help as well. Ive shot in car and handed in did not help. now when I put k say nothing happens, but when I click on it in the menu it says insert the disc and opens even when a disc is already in it. It's very embarrassing and frustrating.any help would be greatly appreciated.  Thank you

  BTW, sony vaio laptop and windows Vista edition Home premium

  Have you all? Check with your system manufacturer, the manufacturer of the device and the myce.com
  forums for the exact registry entries you need. And of course the drive could fail.

  It is sometimes useful to restart at the top and work down through them carefully as the
  Difficulty is often a combination of efforts.

  Rob - bicycle - Mark Twain said it is good.

• Optiarc DVD RW AD - 7640 ATA Device cannot read DVD

  When I insert a CD or a DVD, Windows Vista does not recognize the disc. If I double-click on the disk drive in Windows Explorer after that I insert the disc, I get the following error message:

  Insert the floppy
  Please insert a disk in the drive ( DriveLetter :).)

  Help, please.

  I tried everything that is published in previos sections but nothing works.

  Hello nikasru,

  ·         Your DVD player was working fine at all times before?

  You can try the below link which will automatically diagnose and repair problems with your CD or DVD drive trying to read or burn media.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again?

  I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again? I bought an old compaq desktop computer, and I want to update.

  It's probably too late because you have unsealed the package, but as you have relatively minor glitch of the material do not have a DVD player, did you use the (free) Windows 7 Upgrade Advisor to determine whether your computer hardware is capable of running Windows 7?

• When I place a disc in my CD - DVD player, it says that it cannot read the media.

  I use a Windows 7 computer and everytime I put a DVD in the drive, it says that it cannot read the disk media. I tried to uninstall and reinstall it, I also tried the Player update. The computer realizes that the drive is in the computer, but it will not play any DVD or CD. Anyone know how I can get running without having to disassemble the computer?

  Clean the disc with a DVD cleaning disc, available in most stores and retail businesses.  If this fails so that the reader has probably not and must be replaced.

• cannot read the sd card. PCI device problem

  PCI\VEN_10EC & DEV_5209 & SUBSYS_166E103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_166E103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  series of HP pavilion g4 laptop

  my laptop cannot read the sd card

  Hello

  What is the product/model of your computer? G4 something. The second driver on my very first post should work but why?

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5093402 & sw_lang =

  Now, I need to know the product/model of your computer and its operating system. Please, use the following instructions to find out:

  http://support.HP.com/us-en/document/c00033108

  Kind regards.

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• iTunes cannot read the contents of the iPod

  On a model MC540LL/A iPod running iOS 6.1.6 I get this alert:

  iTunes cannot read the contents of the iPod "IPod of Carl Carlson". Go to the summary in the iPod preferences tab and click on restore to restore the iPod to factory settings.

  There is no summary tab or the restoration.

  I have

  Restore all settings

  Erase content and settings

  along with several others that appear irrelevant.

  Which is appropriate?

  Thank you

  Connect your iPod to your computer and restore via iTunes

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  You can then restore the backup:

  To restore backup see:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  https://support.Apple.com/en-us/HT201272

• I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card

  I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.

  I'm a model so need to step by step instructions: o))

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.

  Method 2:

  I also suggest you to check if the memory card is detected by a different card reader.

  Method 3:

  I suggest you to see link and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Windows cannot read the disk in drive c.

  I recently bought 5 blank DVDs to burn files, but when I put the disk, it showed no AutoPlay, even if I check suggestions asking me every time, but when I double click on the CD player, it says this message, "Windows cannot read the disk in drive c." can someone help me with this problem?

  Not all DVDs are the same, there are many different types and some DVD players may require a particular type

  If the DVD is blank has nothing to read, that it is not formatted/prepared

  With a dvd in the drive, in Solution Explorer, select a file, rt-click and select send to DVD, it works

• Error copying file or folder: cannot read the source file or disk.

  My problem occurs when you try to copy on the same computer I am on (or to a remote drive).  I get one of these messages in the dialog "error copying file or folder.

  box:

  Impossible to copy 'Filename': data error (cyclic redundancy check).
  Impossible to copy 'Filename': cannot read the source file or disk.

  Hey Norton victim,
  
  (a) what is your operating system?
  (b) what program file you are not able to copy?
  
  As the files are copied, Windows verifies that the data that has been copied are the same as the source files. The cyclic redundancy check (CRC) error occurs when the copied data does not match the original.
   
  This could be down to a mistake of the DVD, the disc goes wrong and has failed to 'read' the file properly or the file was placed on a bad sector on your hard drive. (Could be just down to a scratch or some marks on the dvd, maybe clean it if necessary and try again).
   
  I would run a check disk (CHKDSK) against the drive to rule that, although lacking - you have another dvd player to try the disc again? If so, try the dvd in another drive, or even a completely different machine to try to pin-point the problem.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
  
  FOR INFO:
   
  Data error (cyclic redundancy check)"Error Message When Outlook downloads E-mail
  http://support.Microsoft.com/kb/319128
   
  Aziz Nadeem - Microsoft Support

• Windows Media Player 12/Windows 7; Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support.

  Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support "?  I have Windows Media Player 12 and it comes a new movie.  I can play other discs blue ray on this computer, but not this one.  Is there an update that I'm missing or a codec I need?

  Thank you

  This new film format is not supported by Windows Media Player, here is a link on how to play a dvd on windows media... player and codecs...

  http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player.

  If you can not play... try using third-party codecs, but at your own risk :D

  Hope this helps you :)

• ORA-19846: cannot read the header of the data file of the remote site 21

  Hello

  I have a situation or I can say a scenario. It is purely for testing base. Database is on 12.1.0.1 on a Linux box using ASM (OMF).

  Standby is created on another machine with the same platform and who also uses ASM (OMF) and is in phase with the primary. Now, suppose I have create a PDB file on the primary of the SEED and it is created successfully.

  After that is a couple of log, do it again passes to the waiting, but MRP fails because of naming conventions. Agree with that! Now, on the primary, I remove the newly created PDB (coward the PDB newly created). Once again a couple of switches of newspapers which is passed on to the wait. Of course, the wait is always out of sync.

  Now, how to get back my watch in sync with the primary? I can't roll method until the required data (new PDB) file does not exist on the main site as well. I get the following error:

  RMAN > recover database service prim noredo using backupset compressed;

  To go back to November 8, 15

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 70 = device = DISK stby type instance

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover at the 18:55:32 08/11/2015

  ORA-19846: cannot read the header of the data file of the remote site 21

  The clues on how to I go ahead? Of course, recreating the eve is an option as its only based on test, but I don't want recreation.

  Thank you.

  I tried like below:

  1 a incremental backup of the primary of the CNS where off the eve also taken primary backup controlfile as Eve format.

  2 copy the backup of the watch parts, catalogged them on the day before.

  3 recovered Eve with noredo option - it fails here with the same error pointing to the 21 data file.

  OK, understood. Try not to get back the day before first, rather than restore the controlfile and then perform the restoration.

  Make it like:

  1. take incremental backup of primary SNA, also ensures the backup controlfile format.

  2. copy pending, get the location of the data file (names) by querying v$ datafile on the eve. Restore the controlfile ensures from the backup controlfile you took on primary and mount.

  3. Since you are using OMF, the path of primary and standby data file will be different. (/). If you require catalog data from the database files pending.

  (Reason: you restore controlfile from elementary to step 2, which takes place from the main access road). Use the details that you obtained in step 2 and catalog them.

  4. turn the database copy by RMAN. (RMAN > switch database to copy ;))

  5 Catalog backup items that you copied in step 2.

  6. recover the standby database using 'noredo' option.

  7. finally start the MRP. This should solve your problem.

  The reason I say this works is because here, you restore the controlfile to primary first, which will not have details 21, datafile, and then you are recovering. So it must succeed.

  In the previous method, you tried to first collect all the day before, and then restore the controlfile. While remedial classes, always watch seeks datafile 21 as he controlfile is not yet updated.

  HTH

  -Jonathan Rolland

• 12.1.1 new install: AC-00402: cannot read the driver file: addbtmpl.drv

  Hello
  
  Im making a new 12.1.1 install the new test server and unziped downloaded media on the disc (not not using DVD). I ran not adautostg.pl because I felt is was not necessary because the downloaded media.
  
  I did the pre-installation steps according to metalink 761566.1
  He did uncompress drives then I get the following error and I can't file: addbtmpl.drv anywhere. This is step 2 of 5-> database configuration 92% (RW50004). I can't proceed immediately.
  
  /U01/app/Oracle/DB/tech_st/11.1.0/appsutil/log/VIS_ < servername > 09171403.log
  
  Logfile located at /u01/app/oracle/db/tech_st/11.1.0/appsutil/log/VIS__ < servername > ApplyDatabase_09180926.log
  
  
  | 0% completed AC-00402: cannot read the driver file: /u01/app/oracle/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
  
  Cannot run configuration database using RapidClone
  
  RW-50010: error:-script returned an error: 1
  RW-50004: Error Code when you run the external process. Check the log file for more details.
  Install the driver of database running for instance SCREWS
  
  Thank you

  Im making a new 12.1.1 install the new test server and unziped downloaded media on the disc (not not using DVD). I ran not adautostg.pl because I felt is was not necessary because the downloaded media.

  You don't need to run the intermediate script if you have downloaded the site Web e-Delivery - in the electronic help files fast delivery to install in Oracle E-Business Suite Release 12 [406138.1 ID]

  I did the pre-installation steps according to metalink 761566.1
  He did uncompress drives then I get the following error and I can't file: addbtmpl.drv anywhere. It is step 2 of 5--> (RW50004) database configuration 92%. I can't proceed immediately.

  0% completed AC-00402: cannot read the driver file: /u01/app/oracle/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv

  It seems that the file is missing.

  Please run md5sum according to (checksums MD5 for R12.1.1 Quick Install Media [802195.1 ID]) to check the integrity of the domain stage directory before running the quick installation.

  Thank you
  Hussein

• Bridge cannot read the format from my new camera RAW

  I just bought a new Sony SLT - A58 but bridge says that it cannot read the RAW format, so, I can't download my pictures.

  I went online and found an Adobe Camera Raw 6.7.1 and DNG Converter 7.4 plugins that supposidely would solve the problem. Nothing helps. Still refuse to recognize the RAW format.

  Desperate as it's my job to camera and and need it up and runing as soon as possible. I have had absolutely no problem with my older Sony A100.

  What's weird is that... If I pass the photos in the converter, it shows me the .dng pictures version, so something is there. Why the bridge can not see my RAW photos? ... and also, leave tons of caches and weird icons in the file, a real mess.

  I'm on Mac OS 10.6.8 platform (Snow Leopard) and using CS5... and Yes, all my programs and software are up-to-date.

  Thank you for your help...

  ... and happy new year

  So if the RAW support is specific, why do a plugin for CS5 and for my camera?

  Adobe has released versions of Adobe Camera Raw (ACR) immediately to ACR 1.0 (which was compatible with Photoshop 7). However, cameras supported varies according to the version of ACR and the version of the Adobe application.

  You must match:

  • your camera brand and model
  • the version of Camera Raw that takes in charge your camera brand and model
  • the specific version of Adobe software that supports the version of Camera Raw that you need.

  In your case, the Sony SLT - A58 was first based ACR 7.4 - which is only supported in CS6 and later versions. CS5 is not compatible with ACR7.4.

  Full list of supported devices is here

  http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

  Applications of camera Raw compatible Adobe are listed here

  http://helpx.Adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  CS5 is certainly not an antique and the A58 Sony isn't a huge technology Hasselblad. I have friends who have a large Nikon and Sony A77 and Canon and import their FIRST in their Bridge CS5.

  All that matters is that the specific camera corresponds with what version of ACR - and what applications are Adobe are compatible with this version of ACR.

  Can't comment on great Nikon or Canon mentioned above without specific camera model numbers.

  However, the Sony A77 is supported by ACR6.5 which is compatible with Bridge CS5 +. Easy to see why this combination works.

  Similarly, your Sony A100 was first supported by ACR 3.5, which is compatible with Bridge CS2 +. Easy to see why it works.

  Always read the tables linked above Adobe and cross with each other. That should clear up your confusion.