Optical drive went lack of Vista SP1 based computer laptop HP

Similar Questions

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• Cannot update Vista SP1, the computer restarts and goes into repair mode.

  Im trying to install SP1 on a laptop with Vista installed. Everything is fine and the installation complete the part 2 or 3, then restarts. After that, I'll get the progress bar of vista for a few moments, then the screen goes black for a bit and then the computer restarts. If I restore to before SP1 has been installed on the computer is fine. I've run the preparation tool before installing SP update and that did not help either. Last know well is no help either. Any ideas?

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Important: How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/
  Support for Windows Vista without service Pack installed will end on April 13, 2010. To continue to receive updates for Windows security, make sure that you are running Windows Vista with Service Pack 2 (SP2). TaurArian [MVP] 2005-2010 - Update Services

• Two versions of vista on my computer laptop processor double the an on the E: drive the second on the C: drive

  When you turn on the computer, you get a boot menu and must choose which version of vista to use. I want to delete a single version, does anyone know how? I had to use a vista boot disk to fix another problem with him and it worked but left me with two versions of vista on my computer. Now, I want to remove the redundant version.

  Hi Shanks23,

  To change startup options in Windows Vista and later versions of Windows, use BCDEdit (BCDEdit.exe), a tool included in these versions of Windows. You may not use Bootcfg or NvrBoot to change boot options on Windows Vista and later versions of Windows, even if you can continue to use them to modify the options to start on earlier versions of Windows.

  To use BCDEdit, you must be a member of the Administrators group on the computer.

  Edit the start menu in Windows Vista and later versions

  In Windows Vista and later versions of Windows, new boot loader entries are not added to the boot menu automatically. You can place the boot loader entries in any order.

  You can use the displayorder option to set the order in which Boot Manager displays the boot entries in a multiboot menu. The command has the following syntax:

  bcdedit displayorder {ID} {identifier}...

  The ID is the GUID of the boot entry or a reserved identifier, {Current}). Separate each ID with a space. Remember to include the curly braces ({}).

  For example, to add boot DebugEntry entry to the start menu after the {current} entry, use the following command:

  bcdedit displayorder {current} {49916baf-0e08-11db-9af4-000bdbd316a0}

  You can also use the options /addlast and/addfirst/Remove to order and to remove items from the menu. For example, the following command adds the start-up input DebugEntry as the last item in the menu:

  bcdedit displayorder {49916baf-0e08-11db-9af4-000bdbd316a0} /addlast

  To verify that the display order is correct, use the following command:

  bcdedit

  When you type bcdedit without additional parameters, BCDEdit displays the entry of Boot Manager and boot loader entries in the order in which they appear in the menu.

  For more information, please see the links below.

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/e071dd6f-051d-4FD7-989a-327c5276c2c0

  Adding entries to startup

  http://msdn.Microsoft.com/en-us/library/ms791568.aspx

  Change the default boot entry

  http://msdn.Microsoft.com/en-us/library/ms791566.aspx

  BCDEdit Command-line options

  http://TechNet.Microsoft.com/en-us/library/cc709667 (WS.10) .aspx

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Replace hard drive SSD on HP Pavilion f030nd 17 - computer laptop

  Hi all

  I bought a laptop HP Pavilion 17-f030nd - computer. Now, I bought a lot of HP laptops for society, and replace the hard drive has always been a walk in the Park. You just remove the CAP with a few screws and replace the HARD drive.

  Now with this model, is not limited to delete? Can someone explain to me how do I replace the HARD drive? I can't find anywhere. There are a few screws, but it seems that I have to disassemble the computer laptop everything?

  Help is appreciated.

  Kind regards

  Willem
  The Netherlands

  Hello

  Well, life has changed. I have still a few laptops around and replace the HARD drive on them is a 5 minutes task. Now, for this machine, please see the page #105 of the first textbook on the following link:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=7265336

  With a little luck, you need 20 minutes to 30 minutes.

  Kind regards.

• How can get the keys to windows vista for my computer laptop elitebook 8530w c

  Hello

  I bought a computer laptop elitebook 8530w sn 2CE94100GR with vista installed windows. the laptop has collapsed, and now I need the keys to re - install windows vista back. The windows sticker is not there. kindly advice. Thank you.

  Hello

  I bought a computer laptop elitebook 8530w sn 2CE94100GR with vista installed windows. the laptop has collapsed, and now I need the keys to re - install windows vista back. The windows sticker is not there. kindly advice. Thank you.

  ===================================================
  For OEM support software... Check with your computer manufacturer.

• The script files are corrupted in vista on my computer laptop r61i

  Technical support of McAfee said that my scripts files are corrupted in vista on my computer r61i laptop... How can I download and replace on a preinstalled OS

  * original title - scripts to repair files in thinkpad r61i of vista preinstalled v

  Hello DonSchaffer,

  1 script are. what files you referring?

  2. What are the problems you are having with the computer?

  3. are you referring to the file damaged desktop system?

  Please give us more information about the files that you are talking about and the issues you have with the computer. If the system files are corrupted on the computer, I suggest that you run the tool on the computer system file checker. You can check the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Get original Vista OS on computer laptop back non genuine windows 7 ultimate with no cd?

  Hi, I'm trying to get the original Vista OS on my laptop after having been "upgrded" I don't have the CD to install windows 7 ultimate (I think a trial) but I don't have the code to reinstall vista original key WHEN I can find the download for Vista OS! Can anyone help? PS I'm NOT as good with the PC so please if you can help, give an idiots guide (step by step).

  Thank you

  Simon

  You must contact the manufacturer of your laptop and see that if the disk system restore or recovery for your laptop is available, usually they will send it for a small fee.

  You could also see if this article applies:

  http://support.Microsoft.com/kb/971760

  writing in the new message: * e-mail address is removed from the privacy... *

  Hi, I'm trying to get the original Vista OS on my laptop after having been "upgrded" I don't have the CD to install windows 7 ultimate (I think a trial) but I don't have the code to reinstall vista original key WHEN I can find the download for Vista OS! Can anyone help? PS I'm NOT as good with the PC so please if you can help, give an idiots guide (step by step).

  Thank you

  Simon

• How do I reformat my hard drive and reinstall Windows Vista on my computer?

  original title: how to reprogram my computer

  How to reprogram my computer

  Hello

  do you mean reinstalling vista?

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• memory lost on drive C, use windows vista on acer computer

  On my computer acer drive C that corresponds to the drive were all downloads go. I noticed that I keep losing the memory on this drive. I have not downloaded programs for about 2-3 months. I have 69 Gb of memory on this drive > at some point 1 week ago, I got 29.5 GB of memory but with in any one week i ' am up to 25 GB of memory. Please note D drive is were my backup of files go and I noticed made a backup for several months.
  I regularly drive clean at least 1 to 2 times per week.
  But I noticed ago 1 hour I won 2 GB of memory.
  I had my computer for several years, I have not downloaded brand-new on the C drive.
  could someone help me with this problem.

  Hello

  By default, the system restore takes up to 15% of the capacity of your hard drive.

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Using the free program CCleaner to clean up unnecessary files on your hard disk:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Memory in Windows Vista based computer laptop problems

  System crashed repeatedly showing suite msgs:

  "IRQL_NOT_LESS_OR_EQUAL"

  "MEMORY MANAGEMENT".

  That's why I performed "Test of Diagonsitics" memory... it shows "detected hardware problems.

  How can I solve this problem? Is there a problem with my RAM? What should I replace it?

  Thanking you in advance,

  If you have run tests of memory and it does not... then a ram module is likely to be defective and must be replaced. You have more than 1 memory module... If you maybe only 1 of 2 that is faulty. The control program memory should tell you that it has failed and must be replaced.

• A hard time with the drivers for Vista Home Premium computer laptop computer network with Windows 7

  OK, I've read tons of information on that and I'm stumped.  I have an Epson Stylus CX6600 all-in-one printer.  I have my Windows vista Home premium networking with my 64-bit Windows 7 computer.  I go to the step where the machine Vista attempts to connect to the printer on the network, then it asks a driver.  The driver file is already on the vista machine.  I installed the latest drivers from Microsoft and epson on the Windows 7 machine and he always asks a driver.  Can someone point me to the exact file name and the location of the driver in the vista vista machine so I can simply copy and point to it my windows machine 7.  I did the updates from Microsoft to get all the latest drivers.  Thank you.

  You do not install the Vista drivers on Windows 7 computer.

  Repost nicely in the Forums of Networling, as it is a matter of networking:

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  Vista Networking forum at the link above.

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads?filter=answered

  Windows 7 networking forum.

  See you soon.

  Mick Murphy - Microsoft partner

• Web camera does not, windows vista on a computer laptop toshiba a300 satellite

  I was wondering if you might know how to solve my problem.  Recently, I restarted my laptop and have had problems with the installation of Service Pack 2.  However, he miraculously installed on the computer today and once rebooted after the installation of Service pack 2, it has now in an error box "the webcam driver open fail.  "Please restart camera or computer.

  I restarted the computer and there no resolver question and I can't open or find the webcam in my control panel and can not find if the driver has been corrupted or another.  Any help would be greatly appreciated.  Thanks a lot :)

  Hi Zam,

  I suggest you to follow the steps and check if it helps.

  Method 1: Download the latest driver for your Webcam from the link and check if it helps.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Method 2: You can also try uninstalling and reinstalling the drivers of Webcam and check if that helps.

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) search of Webcam.
  (e) right click on the webcam, and then click Uninstall to remove.
  (f) restart the computer, and then reinstall the driver for the webcam.

• Unable to share files or printers between windows vista desktop and computer laptop windows 7

  I'm trying to set up a home network, I have a windows vista desk top and AComputer laptop windows 7 I have already created a network servant but no machines recognize each other

  Please see the advice contained in the sharing of files and printers with different versions of Windows and networking of computers running different Windows versions . Boulder computer Maven
  Most Microsoft Valuable Professional

• Can I use creative cloud on Mac, Windows based computer laptop and iPad?

  is - can anyone confirm that I can edit and save raw files on a Mac, IPad, laptop computer windows-based? I use the Mac mini at home but travel a lot for work and would like to so edit and save photos on computer based Windows Mobile, the iPad isn't for serious editing, but I use it sometimes

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  -Special photography Plan includes Photoshop & Lightroom and Bridge & Mobile Lightroom