option of the BIOS in the g7-2210ex pavilion

Similar Questions

• There is an option in the bios to set the sata drive * IDE *-mode?

  There is an option in the bios to set the sata drive * IDE *-mode?

  Grobi

  Hi dude

  That s a funny question.
  No, there is no option in the BIOS!

  Please understand that there are various interfaces to drive HARD. IDE and SATA.

  There is a big difference between the two interfaces and the function of the HARD disk on the motherboard controller, you could use a HDD IDE or SATA HDD.

  But you cannot connect a SATA HDD to IDE or IDE HDD controller for the SATA controller. This is not possible due to different hardware.
  This is not possible and that's why these BIOS settings are not available or don t exist!

  Good bye

• Equium L20-264: can I unlock the options in the Bios to change the speed of the CPU & FSB

  Hello

  I have a toshiba equium l20-264 today and I was wondering if I can open it the options in the bios to change the cpu speed and the speed of the fsb.

  But if you don't don't do this, I already have a Dell Xps laptop Overclcoked to 4.5 ghz (twisted majorly) and I installed today a very powerful cooler and heatsink of heat inside my laptop, I'm ready to overclock bu ti do not know if I can via bios but if so could you point me to guides for a code name overclocking intel celeron m 360 : DOTHAN

  Help, please

  regards James...

  Hello

  Unfortunately, this is not possible on the laptop.

  I o year owner of 3 different computers; two laptops and a desktop PC. The BIOS on the desktop is different and allows to change and increase the CPU. But the laptops BIOS does not allow to do something similar.

  Why? Because the CPU overclocking would increase the internal temperature and make portable is not stable and perhaps that it would infringe the motherboards and CPU!
  The notebooks run with maximum efficiency. If you compare the notebooks modules with cooling Office cooling modules you will see the difference!

  Please don t waste your time and don t find any possibility to overclock the CPU and the FSB

  concerning

• No inheritance Option in the Bios button

  I have lenovo ideapad core i7 laptop z400.

  I checked all the options in the BIOS, there is no key inherited or a similar option it.

  in fact, it is now ACTIVE, if I press F2, decrease in brightness, if I press F3, the brightness increases.

  But if I press FN + F1, the true function of formula 1 is used.

  So how to disable the keys to this LEGACY?

  Good evening.

  Please take a look to our Knowledgebase article here: http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/Z400-Z500-P500-How-to-swap-function-keys-...

  It will show you a BIOS update that resolves this problem. Please read the article and the Readme file for the update carefully.

  Please post back to let us know how things work.

  I hope this helps.

• Laptop turned on, password appears on black screen, windows loading bar appeared, then got two options in the BIOS Setup Utility and change Boot Device order, I don't know what is happening, help please!

  My sisters notebook froze and she turned off the power switch, when she turned on the screen was black and a password box appeared when I entered the password, the XP loading bar came as usual and then I had two options at the bottom of the screen. We want to press F9 for and the other was to press F10 for BIOS Setup utility, after seconds, the screen went black and then appeared again the password and the circle continues. The laptop is only 1 week and I don't know if it's something she did or if it's a technical foul, I would be grateful if someone could help me or if I should take it to a technician. The laptop is a Compaq Mini 110 and it works on Windows XP Home Edition.

  Hi, your sisters Notebook is under warranty and it could be a hardware problem.

  As the laptop is only one week.

  I suggest that advise you your sister back to the place where it has been sold since.

  Slan go foill, Paul

• Option in the BIOS to "permanently disable" Computrace

  Hello

  In the configuration of the BIOS T500 is the option:

  Security: Computrace: Computrace Module Activation

  with 3 possible values:

  • Enabled (default)?
  • People with disabilities
  • Permanent disability

  I think I understand how Computrace BIOS works: at startup, the BIOS checks and ensures that the necessary drivers/services are present in the operating system file system before the OS supported boots. The Computrace service then runs 'hidden' in the OS and, periodically, telephone reception.

  I want to know is what happens if I select the BIOS option "permanent disability". The auditor of Computrace/charger is removed from the BIOS? Is it possible to never turn Computrace at a later date, perhaps by flashing the BIOS?

  Thank you

  Frank

  This field allows you to activate or disable the interface BIOS Service optional Computrace (R) of Absolute (R) Software module. Of Absolute Software's Computrace agent is a service solution designed to help track assets and provide recovery services in case the laptop is lost or stolen. The Computrace agent communicates with absolute software monitoring server at scheduled intervals to provide follow-up service. By activating the service, you consent to the transmission of information from and to your computer and the control of absolute software server. The Computrace service is purchased as a separate option and the monitoring server will allow its module security officer through an interface provided by the BIOS. The official follow-up Computrace can be used only in the United States, United Kingdom, Canada and Australia. Computrace (R) and Absolute (R) are registered trademarks of Absolute Software Corporation.

  Disable = permanently block the Computrace module interface.
  Disable = block (default) Computrace module interface.
  Activate = Permit the Computrace module interface.

  The absolute anti-theft solution is currently disabled. Note the options to enable or disable will be permanently activate or deactivate the function and no changes will be allowed.
  ---------------------------------------------------------------------------------------------------------------------------------------------------

  In addition, if people are questioning the service - for individuals you can get info here: http://www.lojackforlaptops.com/learnmore.asp

  For all software solutions - the info is here: http://www.absolute.com/

• There is no option in the bios to enable the memory remapping? !

  There is no option in the bios to enable the remapping... my last windows 7 x 64 memory showed all my 4 GB of ram... but however I have clear now to install win7 x 64 or x 64 pro win8 it said usable 3.79 and info pc does not recognize my nVidia GPU (only graphics card intel HD recocnizes) while the nVidia control panel can recognize GPU and intel HD graphics together... my system is asus u36jc notebook... help is there Please...: |

  Hello

  Please contact Miceosoft answers.

  Memory remapping option is not available in the BIOS and we can't really. If you do not want to remap the memory, turn the computer off, remove the cover from the chassis and modules of memory Exchange (only if there is more than one).

  I assume you are using an Intel core i processor series, 2nd or 3rd generation. Usually when your pc doen't need many complex graphic treatment, the processor works as the graphics processor. In this case, when you check with Windows, it will show only currently work graphics processor - Intel HD graphics card. In addition, you can switch between graphics, to know what is the default value. In this way, if you select graph nVidia, Windows will display it info.

  I suggest to keep the setting of graphics as such for extended battery backup.

• All vmware products does boot from USB option in the bios?

  All vmware products does boot from USB option in the bios?

  Hello

  No it is not yet possible. I hope that this will change, but not at the moment.

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• NB500-107 - no option in the boot on USB

  Hi experts,

  Help, please. I can't do my NB500 begin on an external DVD - rom because there is no option in the BIOS, only the HARD, LAN and Fdd drive... I replaced my faulty HDD... Please help

  Thank you...

  When you start your press NB Please F12 to get into the boot menu. USB option is listed here?

  In General, Toshiba offers small tool for installing on USB recovery image. This bootable USB key can be used for recovery image installation.
  You created this USB key in the past?

  Out of curiosity: what operating system you want to install?

• update the BIOS of motherboard for HP Pavilion M7570n and now my computer going in circles

  I have a HP Pavilion - XP or version of the original software m7570n!

  Motherboard is HP/Compaq name: Leucite-UL8E

  http://support.HP.com/us-en/document/c00714544

  I downloaded and installed from HP website: update the BIOS of motherboard P5LP - THE

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-54482-1&cc=us&DLC=en&LC=en&...

  Now my computer boots into a circle.  It begins... window XP blink... I can see a quick blue screen and some info, but too fast to read... then at startup mode without failure, etc, etc, etc! Each option piced it goes back to the circle of frustration.

  I entered F1 and set it for return to the settings by default, but who has not set.  I see several suggestions to pull CMOS jumpers, but fear just start riders pulling and causing damage.

  Someone can give me a step by step repair to understand where and how update BIOS software... is so simple that all reinstall the same file again?  I have the origianl file downloaded on my USB key.  I'm not comfortable with moving forward in fear of more damage!

  THANKS FOR ANY HELP IN ADVANCE!

  TIM

  NOW FOR THE FINAL SOLUTION:

  Google is my - so true!  I did google how to reflash the BIOs, but I kept? How I was going to do when I've never seen a 'USB key' as an option in the BIOs boot sequence.  I then looked to do the 'flash' of a CD - with the boot BACK on it, files but everywhere I read on line discussing this method - said most flash programs require you to save first the old BIOs files - you can't do from the BACK / BIO Flash or at least I haven't found a way to BACK startup disk!

  NOW, I'M TOTALLY FRUSTRATED!  Now what should I do?  I knew that the 'blue screen of death"contained the error message that I need to know! I just need to read it, but I couldn't because it flashes in a fraction of a second? GRRRRRRRRRR

  WELL!  I grabbed my digital camera Sony - put on 'SPEED' shot!  I started the computer and kept shooting until I captured the screen!  The error message was "0x0000007B"!

  I googled the error message and found this site:

  http://pcsupport.about.com/od/findbyerrormessage/a/stop0x0000007b.htm

  I have read on the list of options and decided that the setting in the BIOs should be where I wanted to start.  I changed the setting for the "RAID" to FDI HHD... BINGO!  I'm back in the game!

  SO THANK YOU FOR YOUR HELP AND TAKE THIS INTO ACCOUNT FOR FUTURE TECH SUPPORT QUESTIONS!

  TIM

• Where are the options of the trackpad in Sierra OS?  In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  Where are the options of the trackpad in Sierra OS? In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  System Preferences > Trackpad!

• When I turn off the option "optimize the iphone storage" in iCloud photos, made my phone automatically re - download all my photos/videos in my phone again?

  I used the option "optimize the iphone storage" on my old phone to save space, but I hated waiting to load when I want to watch them. Now, I clicked on "Download and keep the originals", but I can't tell if my phone is re - download the original photos/videos to iCloud to my phone. What does automatically or are these pictures forever in the version "optimized" on my phone?

  Subsequently, it must download the originals. Synchronization is VERY slow, so it may take some time depending on how many photos you have.

• Options of the SSD in late 2013 Mac Pro update?

  Options of the SSD in late 2013 Mac Pro update?

  Mac Pro has 256 GB which is almost full despite the displacement of all the large files (Photos, downloads, etc.) out of the disc. I'm at a point where the Player update seems to be a must.

  OWC option seems a bit of a hack using a slower drive and a controller.

  https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013

  MCETECH claims to use a new disk allowed Apple with trim shoring and the ability of bootcamp to use Windows (important to me).

  http://store.mcetech.com/mm/merchant.MVC?Store_Code=MTOs & Screen = prod & Product_Cod e = 1TBPCIESSD-MP13

  There are eBay sellers who claim to use the running game in recent versions of the end of 2013 Mac Pro.

  http://www.eBay.com/ITM/new-Apple-Samsung-1TB-PCIe-SSD-MacBook-Pro-iMac-MacPro-L ate-2013-2015-SSUBX-/ 151605593746

  and

  http://www.eBay.com/ITM/new-Apple-Mac-Pro-late-2013-1TB-PCIe-SSD-Flash-storage-M Z-KPV1T0R-0A1-605-00108/351601210482?_trksid=p2047675.c100005.m1851 & _trkparms = AI d 3% D 222007% 26algo % 3DSIC. MBE % 26ao %3 D 1% 26asc %3 D 38804% 26meid % 3Dff768b1c384b46d68010 bf8050452542% 26pid %3 D 100005% 26rk %3 D 4% 26rkt %3 D 6% 26sd %3 D 151605593746 & rt = nc

  two sellers have a very high rating, but I don't trust eBay.

  The MCETECH seems to ensure ongoing compatibility as it is a part of Apple.

  Any ideas or experiences with the above or other good known options?

  OWC option seems a bit of a hack using a slower drive and a controller.

  https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013

  I think you're bad read the OWC page. They propose to replace the internal SSD stick with their largest capacity SSD stick. The external box is only for you to continue to use the original USB key (perfect condition) as an external drive, if you wish.

• How can I change the display option in the Photos of "Dungeon sorted oldest first" to sorted most recent first?

  All my photos are displayed as "oldest first". I want to change that "declining" but it doesn't seem to be an option as the Dungeon sorted oldest first is "grayed" and is not accessible."

  You can't because it's not an option - you can ask Apple - http://www.apple.com/feedback/photos.html

  It will contain all the photos - so you can make a smart album with a criterion not responding as date is not 1/1/1000 intelligent alum can be sorted by title or date, alphabetical order

  LN

• Why "Quit" option in the menu did not close the app?

  When I press the options on the menu, I select "Quit" and Firefox on Android latest version resignation and clean as it was created. However, when I hold the button pop up list of the still running on my Android app, it shows Firefox still works even I selected the option "exit". I tried to check this topic on the forum of the site but nothing came. I know that I am new to this technology with Smartphones, but I want Firefox to be the best browser, then I missed something that I need to install to quit Firefox or it is a bug, I assumed report? Thank you for your help.

  Good question Junwookee,

  Don't worry, when you press "Quit", Firefox stops running. You can check this by opening your phones settings > Applications > running. You will see that Firefox is not on the list.

  Unfortunately, I don't think that Firefox is able to evade your thumbnails of recent applications. These miniatures are in fact all the recently used applications, even if they are not still running. If you wish, you can hide thumbnail of Firefox by hitting swipe he took off to the side of your screen.

  Nevertheless, I filed a bug for you, because the situation is that can be confusing:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=1096630

  Best,

  Jayelbe