Similar Questions

• USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  Once again... Thanks for the tips...

• BlackBerry Smartphones new phone, no e-mail option configuration

  I just received my 8330 Verizon replacement today and went to set up my email, but nothing is done, there is no option for the setting up of email, just the Blackberry Enterprise option or configuration of e-mail to jump. I did something wrong here, or can someone ' a Please direct me to where I can solve this problem.

  Thank you

  Josh

  Thanks for the welcome, this is my personal phone, I think I know what happened now but... somewhere along the line, I guess Verizon and BlackBerry did not talk between them, after I activated my phone, but it seems now that the issue is resolved.  Thanks for your time though!

  Josh

• obiee11g: is there an option "configuration only.

  My attempt to OBIEE11G installation on linux failed to step "Setup." I searched the forums and found that I have to adjust SELINUX to disabled. I did this now.
  
  Now, what I have to do a fresh install everywhere and access configuration or is he in any case, go to step 'install' and go directly to step "configuration"? There is a "software only" option Is there a 'configuration only' option too?
  
  Thank you.
  
  PS: I wish that the mode would have checked if the "SELINUX" was set to "enforce" in the first place.

  Hello
  Yes, it is available. While installing obiee11g---> from, it will ask you need to select the installation option (simple, business and software only) here you need to select 'Software only '. Once this installation is made. you need to do the obiee11g u configuration must run below a

  Drive:\Oracle\Middleware\Oracle_BI\bin\Config.cmd obiee11g installed

  FYI... It is obiee11g with the only option of software on the steps of win 2008 Server

  http://obieeelegant.blogspot.com/2011/09/OBIEE-11g-111150-software-only.html

  You can get an idea and try to do the same thing under linux also

  Thank you

  Deva

• Error of invoices of purchases: subledger accounting options configuration is not complete for this book.

  I created a new book and made all the required settings for purchasing options and pay

  I created a purchase in Purchasing order and created an invoice in paybles

  but when I am trying to VALIDATE the invoice it is throwing the following error message

  "subledger accounting options installation is not complete for this book."

  I also created a subsidiary ledger and I also run the program "Update of the subledger accounting program" of responsibility for accounts payable

  Can someone suggest me a possible solution

  Thanks in advance

  When you set the ledger, it seems that you forgot to give the value for the field "method to account for the subledger.

  Specify 'Accumulation Standard' as the value for this field currently. You can change it later according to your needs.

  Kind regards

  Srini

• Configure the logging of the Oracle diagnostics for the IntegratedWebLogicServer option

  Hi all

  We have recently updated for jdeveloper jdev 11.1.1.9.0 11.1.1.7.0. And in version 11.1.1.7.0 it used to have the option "set up Oracle Diagnostic Logging for IntegratedWebLogicServer" in the menu (see image below) or of the

  «Server log > actions > set the IntegratedWebLogicServer Oracle diagnostics logging "to access the logging.xml file.but in jdev 11.1.1.9.0.» I can't find or the other place. Is it still there in jdev 11.1.1.9.0 or I need something to display the option configure?

  Your answers are appreciated.

  JDeveloper - 11.1.1.9.0_GENERIC_150314.0718.6673

  10.3.6.0 integrated weblogic Server version
  

  Java version - jdk1.7.0_85

  Thank you

  

  This is a known bug. In 11.1.1.9 you can only work directly logging.xml file.

  If you have access to support.oracle.com, you can look for bug 21151614.

  Timo

• Ask a compilation on the generation of files option

  Hi all

  There is such an option to generate all the compiled files which is not stored by default, but I can't remember now.

  Everyone knows this?

  Thank you and best regards,

  Yan

  -keep

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Compilation of CVI2013

  Hello

  I'm still discovering all these exciting features of CVI2013, so here I am with two issues related to the compilation:

  (1) on the compilation Options / Configuration Options Panel, the check box 'Show indicators of warning in the window output to build' doesn't seem to have an effect: in both cases, I get the warning messages (warning level set to Custom). What is a warning flag?

  (2) the announcement of the new Albums of CVI2013 claims to build faster. My impression is that now, with the help of CVI2013 in debug mode, take it same code about 5 times longer to compile. Unfortunately I did not measure the compile time before the upgrade, so it's an indicative value only. Is there a setting I have forgotten?

  Thank you!

  Hi Wolfgang,.

  Thank you for the project. I confirm that we must, as you said, about 5 times more time to compile with CVI 2013. I don't have a reason for you at the moment, but I created a bug (#422103) report to study soon.

  Luis

• Internal error of the compiler-123002

  Hi all

  I read this error in other post (with the server), I did what it says also in Help:

  -J' reinstalled the drivers and all the things, Xilinx tools are installed as well.

  -I don't have that one device target FPGA (RIO0, SMU-7966R)

  I don't know what could happen, my projects used to run and compile correctly, I changed the location of the screws in the computer in order to get the orderer and there is suddenly no longer works.
  One thing that is quite rare is the option to "Select the server compile" pop up after I press the botton to cancel.

  "LAbview FPGA: the compilation can be performed by the worker of the compilation." The SME worker of compilation are configured incorrectly for this compilation, or maybe a status error '--> I did something with it. "

  When I create another project that connects a simple addition of two constants, don't let compile me, then... This isn't for lack of screws.

  Thank you in advance, it is such a thing as boring.

  Best regards
  Miguel.

  Hi all

  In fact I solved. What happened is that the path of the compiler has been moved to a different folder, so Labview was unable to find it. Put in the correct folder once again was the key.
  It was a stupid question finally, but information is pretty confusing sometimes. I put it here in case other people need.

  Kind regards
  Miguel.

• Disable CSS compile WARNING

  Hi all
  
  How can I disable the warning of compiler on the CSS styles. I need of the solution for the SWF compiled locally and those that are compiled in Flex Data Services. doesn´t Flex - config.XML has the possibility of node.
  
  Thank you
  
  David

  Brent Merci for your quick response. That option works well with the compilation on the spot. I found the solution if you compile with FDS.

  Sound in the docs under:

  Building and deploying Flex 2 Applications > Creating Applications Flex > 2 the kit Flex SDK and Flex Data Services Configuration > Flex Data Services configuration

  You can edit the config.xml file - webtier-flex and turn into production or use the queryString (showAllWarnings = false) If you just test.

  See you soon

  David

• Siri Option not available

  Just bought an iPad running IOS 9.2.1 3.

  In the General settings, I see no Option Siri nor I see the Option dictated in the keyboard settings.

  Restrictions is set to Off.

  I don't know this model iPad (MD-368C/A) IS compatible with Siri.

  Should Siri be downloaded and installed separately?

  It is not available in all countries. Here is the list where it is available.

  http://www.Apple.com/iOS/feature-availability/#Siri

• Call MATLAB MathScript SOAP

  Hello

  I have a generic question about whether it is possible to call functions that belong to non-standard MATLAB of MathScript box. In particular, I have the interface for communication with a web server using the Toolbox of Matlab WSDL and I have a pretty "as what", or with minimal changes, in a fellow engineer Labview module so that the instrument can send data to our centralized, system that uses SOAP as the interface.

  I prefer not to use if possible native SOAP of Labview modules.

  Thank you

  Fernando.

  You actually talk to the node in Matlab? MathScript is version or a language similar to Matlab. There is a MathScript node and a node of Matlab. The Matlab node called Matlab code using ActiveX server of Matlab. As such, it requires that you have Matlab installed on the computer. While MathScript is similar to Matlab, and Matlab code can be run "as-is" in the MathScript node, there are many differences (particularly with certain functions provided). The differences would be in the documentation.  The MathScript node does not call for Matlab code. However, you can call a shared library MathScript. You must compile your Matlab code in a shared library using the Matlab compiler. The target machine would need to have the execution of Matlab engine.

• Question of server FPGA compile

  Hello

  I want to implement a system of compilation farm. There is only a PC development (possibly 1 later) and compiles a worker. The question is, the compile Server (one which dishes to the worker of the compilation of the tasks) possible on the same PC used for development, and in the affirmative, he introduced the bottleneck important compared to using a dedicated machine?

  Thank you

  Hi ToeCutter,

  The compile server can be on the same PC that is used for development without any problem

  ' ' ' ' Refer to the getting started with the FPGA document compile farm, available by selecting Start "all programs" National Instruments "FPGA" start-up of the farm to compile FPGA, for more information about configuring and using FPGA compile farm.

  Use "localhost" as the host name of the server for your compilations to compile.

  Compile farm server uses the same compiling installed tools (Xilinx) on your PC, but instead to directly obtain the LabVIEW project files

  It compiles the files downloaded by the user, there is no difference in performance.

  I hope that helps!

  Kind regards

• LabVIEW FPGA CLIP node compilation error

  Hello NO,.

  I work on an application for my Single-Board RIO (sbRIO-9601) and faced with a compile error when I try to compile my FPGA personality via the ELEMENT node.  I have two .vhd files that I declare in my .xml file and all at this point works great.  I add the IP-level component to my project and then drag it to the VI I created under my FPGA.

  Within the FPGA personality, I essentially have to add some constants on the indicators and entries CLIP to my CLIP out and attempt to save/compile.  With this simple configuration, I met a compilation error (ERROR: MapLib:820 - symbol LUT4... see report filling for details on which signals were cut).  If I go back to my VI and delete indicators on the output (making the output pin of the CLIP connected to nothing), compiles fine.

  I've included screenshots, VHDL and LV project files.  What could be causing an indicator of the output of my VI to force compilation errors?

  Otherwise that it is attached to the output ELEMENT, a successful compilation...

  

  After that the output indicator comes with CLIP, compilation to fail...

  

  NEITHER sbRIO-9601
  LabVIEW 8.6.0
  LabVIEW FPGA
  Windows XP (32-bit, English)
  No conflicting background process (not Google desktop, etc.).

  Usually a "trimming" error gives to think that there are a few missing IP.  Often, a CLIP source file is missing or the path specified in the XML file is incorrect.

  In your case I believe that there is an error in the XML declaration:

  
    1.0
    RandomNumberGenerator
   
      urng_n11213_w36dp_t4_p89.vhd
      fifo2.vhd
   

  This indicates LV FPGA to expect a higher level entity called "RandomNumberGenerator" defined in one of two VHDL files.  However, I couldn't see this entity in one of two files.  If urng_n11213_w36dp_t4_p89 is the top-level entity, edit the XML to instead set the HDLName tag as follows:

  urng_n11213_w36dp_t4_p89

  Also - in your XML, you set the 'oBits' music VIDEO for output as a U32, however the VHDL port is defined as a vector of bits 89:

  oBits: out std_logic_vector (89-1 downto 0)

  These definitions must match and the maximum size of the vector CLIP IO is 32, so you have to break your oBits in three exits U32 output.  I have added the ports and changed your logic of assignment as follows:

  oBits1(31 downto 0)<= srcs(31="" downto="">
  oBits2(31 downto 0)<= srcs(63="" downto="">
  oBits3(31 downto 0)<= "0000000"="" &="" srcs(88="" downto="">

  Both of these changes resulted in a successful compilation.

  Note: The only compiler errors when you add the flag because otherwise your CUTTING code is optimized design.  If the IP is instantiated in a design, but nothing is connected to its output, it consumes all logic?  Most of the time the FPGA compiler is smart enough to get it out.

• Cannot use MATLAB MCR DLLS in LabVIEW

  General information:

  We would like to call a Matlab compiled DLL, which is based on the duration of the compiler Matlab (MCR), LabVIEW. We also want to use the LabVIEW Vision of data collection software. Use a map OR frame grabber is installed, and a camera is connected to the card. We were using an evaluation version of LabVIEW to see if you can solve this problem. We tried two versions of LabVIEW 8.6 and 2010.

  The problem:

  The installation program of LabVIEW place dll in the system32 folder. The names of some of these DLLs are generic enough. LabVIEW vision software includes tbb.dll in the System32 folder. Execution of the Matlab compiler also includes a tbb.dll, not in system32, but in it's own application directory. LabVIEW DLL / so everybody, which is kind of rude, but little matter which at the present time. The biggest problem is when I try to use Matlab in the same process as LabVIEW Vision. It is not possible to do so, because the names of DLL in conflict between them, and I have no control over the source or Matlab and LabVIEW code to allow them to be charged with the full path name.

  For this reason, we can use the LabVIEW software to solve our specific application.

  Hi marcus,

  R & D is aware of this problem and it has already been established as part of the Corrective Action that requires #245249. You can watch the future versions of LabVIEW release notes to see when it is fixed.