OR CVS

Similar Questions

• How can I extract and use the driver "exe" to communicate and to load an Excel "cvs" in my Amateur Radio transceiver?

  I use a Mac Mini OS 10.11.3 (El Capitan) processor 2.5 GHz intel Core i5.  With 16 GB of ram at 1600 MHz kDDR3.  I down loaded the program I need and you used my (Mac) excellent program to load the cvs program sheet.  However, the driver is contained in a 'exe' format and I can't or can extract my Mac to use this program.  This driver is required to enable communication between my Mac and radio transceiver.   The only option I see is to acquire a computer laptop windows to allow the use of this application unless there is a program bootable can I mix on an external hard drive and then use Bootcamp?  Help please.

  Try using CrossOver Mac, or install Windows in Boot Camp or an emulator such as VirtualBox or Parallels Desktop.

  (139948)

• Automator action "CVS Update" could not be loaded because the file ' / usr/bin/cvs "is not found.

  Hello

  I just receive my MBA a few weeks ago to Apple and noticed my Razor mouse worked only with BluTooth but not when it is plugged into a usb port.  Other mouse usb and external drives readers work well.  Razor support told me the plug-and-play subsystem has screwed up, and errors have been associated with Automator.

  I have only a local account and I have not linked to the iCloud account.

  I don't want to reinstall my laptop because I have 300 GB of data on it, as well as some programs that I installed.

  I think that a package is not properly installed or missing, but my OSX knowledge is poor, because I have just started using a Mac!

  Sophies-MacBook Darwin kernel version - Air.local 15.2.0 Darwin 15.2.0: Fri Nov 13 19:56:56 PST 2015; root:XNU-3248.20.55~2/RELEASE_X86_64 x86_64

  Error are usually refers to a/usr/bin/cvs binary missing, and he's not here.

  # ls-l/usr/bin/cvs

  LS: / usr/bin/cvs: no such file or directory

  Some key messages,

  The "CVS Update" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "Filter iPhoto items" cannot be loaded because the "iPhoto" application not found.

  Someone would let me know how I could diagnose it and perhaps repair?

  Best regards, Sophie.

  System.log reported,

  [dec 19 10:33:59 - Sophies - MacBookAir loginwindow [99]:-[SFLListManager(ServiceReplyProtocol) notifyChanges:toListWithIdentifier:] notified of changes of the list element with the identifier com.apple.LSSharedFileList.RecentApplications

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Add movie to iDVD Menu" action could not be loaded because the application 'iDVD' not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Add Photos to the Album' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'CVS Add' could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "CVS Checkout" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'CVS Commit' could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "CVS Update" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "Filter iPhoto items" cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Find items from iPhoto" action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Get iDVD slideshow Images' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Get Selected iPhoto Items" action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: 'Get iPhoto features' action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Import files in iPhoto' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Launch of remote broadcasting' cannot be loaded because the application "QuickTime Broadcaster" was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD New Menu ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD new sequence in the film ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD new slideshow ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IPhoto New Album ' could not be loaded because the"iPhoto"application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "New QuickTime slideshow" action could not be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Play Slideshow iPhoto' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Photos of the magazine' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: 'Set Background Image iDVD' action cannot be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set iDVD button face' cannot be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set Annotations of film' couldn't be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set the properties to read film' couldn't be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set the movie URL' could not be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "See the iDVD Menu hand" could not be loaded because the application 'iDVD' was not found.

  dec 19 10:34:13 Sophies - MacBook - Air SpotlightNetHelper [301]: tcp_connection_tls_session_error_callback 9 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22

  dec 19 10:34:13 Sophies - MacBook - Air SpotlightNetHelper [301]: 8 22 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error

  dec 19 10:34:44 - Sophies - MacBookAir syslogd [48]: sender ASL statistics

  P.S Xcode is installed from the app store.

  and MacPorts is installed.

• With the help of a .dll with a CVS 1458RT file

  Hi, I am a student engineer currently working in my internship. I want to build a program with some OpenCV libraries using the .dll files. I can run in LabVIEW on WindowsOS. I used Visual Studio to compile and make my own .dll files. But I want to load on a CVS 1458RT. I read that this particular CVS uses 'Real-time NI Linux.'  My question is if I can load a .vi with .dll files on this particular CV, or if I have to compile the .so files so he could read since it runs on a Linux environment? I haven't tried to load it with .dll and afraid to do.

  According to this, you must compile with specific OS file type: http://digital.ni.com/public.nsf/allkb/2EA49B05E67DDECF86256F9A006FB315

• Whence the ICD file located in a CVS of Linux RT system camera?

  Whence the ICD file located in a CVS of Linux RT system camera?

  Location of the camera ICD file can be found in the following in a Linux RT (CVS) system directory

  / var/local/natinst/niimaqdx/Data

  See you soon,.

  RUCHI

  / var/local/natinst/niimaqdx/Data

• CVS synchronization with time server (S) NTP

  Hello

  is it possible to sync my CVS-1459RT automatically to a time server NTP or SNTP?

  Thanks in advance.

  Thomas

  Hello

  found the solution in this document: https://decibel.ni.com/content/docs/DOC-39178

  Best regards

  Thomas

• NOR - RT.ini in the cvs-1458RT file

  Hello

  CRIO systems, there is a file named NOR - RT.ini, which can be used to settle the claim of commissioning, set the time zone, etc. It is normally located in the root. Is there a similar file for CVS-1458RT, and if so, where can I find it?

  Thank you

  Soheyl

  Hello

  If you go to/etc/natinst/share you will find no - rt.ini and lvrt.conf. Time zone is located in the [LVRT] section of ni - rt.ini (RTTarget.TimeZone = "Etc/GMT + 6" for example "), and the startup application are defined in lvrt.conf.

  I hope this helps!

  Katie

• Connection to CVS GigE camera via a network switch

  It is a fundamental and very simple question!

  I intend to connect two GigE cameras to NI CVS-1458RT for an application of Imaging. When I tested the configuration in MAX, I realized that I can connect the cameras directly to the PoE ports, or alternatively, connect the cameras directly to the network switch and in both cases, connect the CVS to my network via its ethernet port. I was wondering if there is a benefit by connecting directly the VCA cameras, if I do not anticipate supply their Poe or if my switch has PoE Betacam.

  Thank you

  Usually, you always want your cameras on dedicated lines, or at least only sharing bandwidth with other devices. The mechanism of transport used by GigE Vision isn't really sharing good bandwidth with other devices. If you only share the bandwidth on a link given with other devices, you can throttle each take only a percentage of the total bandwidth. If you have devices without camera on the link, they don't usually have a mechanism to control the gap inter-frame limitation insofar as GigE vision made which would be necessary for properly sharing the bandwidth without remove the packages of bandwidth.

  If you end up sharing one of the ports for the operation and configuration of the CVS on the network, you will be at the risk of losing image data packets whenever the rest of the traffic is sent. Although there are mechanisms in place to return data, these add latency and jitter to your purchase.

  Eric

• 1458RT CVS with 9144 chassis ethercat

  Hello

  I want to use a chassis with a CVS 1458RT EtherCAT. I'll have to dedicated to one of the three gige ports (1/3) to communicate with the 9144 chassis? Therefore 1 for my camera, 1 for gigE plant LAN and 1 for chassis EtherCAT?

  I know there are EtherCAT drive, I work with Allen Bradley, so I think to use a 9263 and a 9411 for analog player. Could you confirm that I will be able to control the analog output of the CVS at the EtherCAT frame to 4ms?

  Thank you

  Patrick

  As mentioned, you should be able to be in the 4 DC, you need. I will recommend you don't not to lower the engine of 1 ms... Also, you should be able to control the etherCAT carefree expansion chassis. However, you should be aware of the limits of the EtherCAT frame.

  This document is very useful:

  http://www.NI.com/white-paper/10555/en/

  You should also be aware that this chassis does not support interactive execution and only allows the use of the network variables. Also be aware that you must create the file bit FPGA and LabVIEW project deployment.

• CVS-1457RT engine of analysis?

  I can configure the CVS-1457RT for the scan engine?

  or do I need to compile a bit to access I/O?

  Best regards

  Henrik Ehlert

  The RESUME is not supported for the analytical engine, but it has a full API to work with an included bitstream to use i / S for typical tasks. Discover the variety of the RIO Vision and examples.

• Hard drive NI CVS-1456

  I NI CVS-1456 device and I would like to know what the hard drive size? Can someone help me or tell me how to get this info from the device itself.

  Thank you

  Shaun

  Shaun,

  Out of the box, the CVS-1456 has 256 MB of nonvolatile memory. I pulled this information from the following knowledge base:

  Specifications for CVS accessories and NI CVS - 145 x http://AE.natinst.com/operations/AE/public.nsf/webPreview/B57B1A01D02680DD86256F4000683FB2?opendocum... 

• NEITHER CVS using Labview Linux?

  Hi, I have a CVS here, as well as 1455 development under labview linux machine. I've used MAX to set up this CVS, but it seems that my labview is not MAX, and I can see on the site it seems to be available for Linux. Could someone point me in the right direction to set up/use my CVS using labview linux (I've got installed 8.5).

  You need to write code CVS to turn an image into a table of number using IMAQ ImageToArray.

  Then, use the shared variable or TCP/IP to return data to the host VI.

  However, there are two things to remember:

  1. an image won't be like in real-time, as show on VI target itself.

  2. because the Vision Development Module does not support on Linux, all the processing of the image on Linux must develop in yourself.

• How read .cvs web server?

  Hello

  I assumed it would be easy, but I'm not having any luck here... I would create a VI to read each of the .cvs file located on a local web server (see imagesfor more details).  Any suggections?

  Thank you

  Pete

  PJackson wrote:

  I can stick this same path in the Open box of excel and the data loads perfectly...

  This is because Excel does some fancy way, analysis, sees the URL and load the file on the web rather than from the local disk. It is in no way standard behavior (although perhaps, it will be in a few years). Until then, you can not treat a URL - an address for a file on a remote web server - as a local file. RavensFan suggestion might work if you set the sharing of files on the remote computer, but then you do file sharing, do not download from the web. To download a file on the web, use the HTTP screw or a Datasocket Read, which is probably the easiest option here. For Datasocket Read, provide the URL (http://10...) as well as the connection to the wire one string empty type. You will have the entire file as a string on the output data, which you can subscribe to the channel of spreadsheet in table for a table.

• How to convert. VCF to CVS files

  I have a contact file .vcf and want to change to .cvs for import into hotmail

  Hello

  -What version of the operating system is installed on your computer?

  I suggest you to consult the following link to convert the file format of contacts.

  Import, export, or change the format for contacts

  Always if you have any questions, I suggest you to post your questions about the Windows Live community.

  Windows Live Hotmail Portal

• 1456 CVS - VISA error connection problems?

  Hello

  I bought a new unit 1456 of old stock, put CVS to update its bios and all the software and will have questions, operate without errors.  It is connected to a Point gray Flea2 640 x 480 camera.  I use Vision Builder for Automated Inspection 4.0 (trial for now, the full version is on order).  Here is a description of the problem.

  1. I can see and connect to the camera via VB for AI or MAX.

  2. There is an error VISA to the MAX with the camera:

  0XBFFF00A8 (VI_ERROR_NPERMISSION)

  viFindRsrc return 0xBFFF00A8 (access to the resource or the remote machine is denied. This is due to the lack of sufficient privileges for the current user or machine).

  Please check the settings of the remote machine and make sure that you added the computer's network address to the whitelist.

  Possible causes of this error:

  1. the remote machine, you access didn't you leave granted.

  2. the remote machine, you access you refused permission to access its resources.

  3. you may have configured your server with a specific IP address and set up your client computer to different IP address rather than the computer name (IE, the client IP address is assigned by a DHCP server).

  3. all software appear to be up-to-date.

  4. There is also one uninstalled OR-IMAQdx with a component IEEE 1394.  Currently installed is NOR-IMAQ for IEEE 1394 2.0.5.  When both are installed, the camera is listed twice.  Which of these is best, or necessary, or both are needed?

  5. the error when I create a new acquisition in VB to HAVE.  I can well access the camera, capturing images and change the settings.  As soon as I try and run the inspection (which brings me to register the program in the unit of 1456), program errors, the inspection does not and does not allow me to acquire new images of the camera until the unit of 1456 has been restarted (reopening the program does not help).

  6. the error that appears after trying a purchase of the aircraft of 1456 is:

  ---------------------------

  Inspection open error

  ---------------------------

  The validation of inspection returns errors. Possible reasons include:

  -Some image files used by acquiring simulate steps are not available on the remote target.

  Save the image folder 'c:\User Images' folder on the target.

  -The screws used by LabVIEW enforcement measures are not available on the remote target.

  Save the screw or LLBs in the folder 'c:\User screws' on the remote target.

  -A few steps of inspection are not supported on this goal.

  -Inspection step on the target plugins are missing or damaged.

  Details:

  State: Inspect - step 1: 'Acquire picture (IEEE 1394) 1' could not be initialized.

  This problem has been resolved.  Apparently the 1456 dislikes Point Grey Flea2 color cameras, but it works very well with mono 8 - bit counterparts.  Thank you
  Tom