OR e/s 14 Instrument installation wizard is not compatible Measurement Studio

Hello

I want to create an Application for Windows OR VISA using Visual c#, but I can not find this new project dialog box template.

I also read this post (http://forums.ni.com/t5/Measurement-Studio-for-NET/Can-t-find-Microsoft-templates-for-Measurement-St...), but it seems that it is not my problem.

When I tried to reinstall Wizard NI Instrument of e/s, I found that it provides no support for Measurement Studio.

I installed MS Visual Studio Ultimate 2012, Measurement Studio Enterprise 2013, NI-VISA 5.4, OR-488. 2 3.1.1 OR August 2014 by this order device driver. My OS is Windows 7 Professional 32 bit.

What should I do now?

Thank you
Thang

Hello thangvq,

I took a look at the Release Notes for measurement Studio 2013, and it seems that the Instrument i/o Assistant OR not is not supported in versions of Visual Studio 2010 at the latest.  Take a look at the Support section of the drivers on page 5 for more information.

Myriam

Tags: NI Software

Similar Questions

  • I just bought the edition student pro Adobe Acrobat XI from amazon. The installation wizard does not recognize my valid serial number. I entered it with and without a hyphen. What should I do?

    I just bought the edition student pro Adobe Acrobat XI from amazon. The installation wizard does not recognize my valid serial number. I entered it with and without a hyphen. What should I do?

    Is the serial number a 24 digit code?

    It is best to contact the Support from Adobe and check with the serial number once:

    "Click the button still needing help, and then select the Chat option:

    https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_account-settings _stillNeedHelp

  • "This installation disc is not compatible with your version of Windows.

    I have a center of Lenovo think that I got from a friend. When I tried to install Windows 7, I get a pop up window that says: "this installation disc is not compatible with your version of Windows.

    Contact Lenovo and get a set of discs of recovery/restore the system if you want to reinstall the version of Windows that comes with it.  Now, your most likely problem is that you have a record of 64-bit and you try to install it inside the XP which is a 32-bit operating system.  Will not work.

  • Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

    Please help me

    Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

    Hi the prey,

    ·         What is the brand and model of the computer?

    You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

    Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

    Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

    Windows 7 Upgrade Advisor - download - Microsoft Windows

    See also:

    Installation and reinstallation of Windows 7

  • Instrument IO Wizard can not find down Version LabVIEW

    Instrument IO Wizard only uses with LabVIEW last?

    I have install SP1 2011 LabVIEW and LabVIEW 2012 SP1, but I can't find Instrument IO Assistant in LabVIEW 2011 SP1.

    Is there a possible way to use the Instrument IO Assistant in the two Version of LabVIEW?

    I have install the LabVIEW with Device Driver 2013.08 2013, it seems that I could use Instrument IO Asisitant in both LabVIEW 2013 and 2012SP1, but still not found in LabVIEW 2011 SP1.

    I guess that maybe there's that something has changed since the Device Driver 2012.08.

    I hope that this maybe a little help for other people.

  • Xmarks is functional? It didn't work for a week and the installation wizard does not work.

    The last time worked Xmarks was on 25 October. I am connected correctly and it tries to synchronize, but never finished. Even the Xmarks Setup Wizard does not work. It is a very useful addon in the past one I hope he'll return to work.

    I had this problem too. I'm running Firefox 25.0 and used Xmarks 4.2.1. Sync would not end. I downloaded Xmarks 4.2.3 from Xmarks web site (not the site of Mozilla Add-ons that apparently has 4.2.1) and now everything looks OK.

    Mark

  • Receive error message: Windows 7 installation disc is not compatible with your version of Windows.

    I bought windows 7 from the College Bookstore, and I can't install it - why this

    He says that the installation disc is not compatiable with your version of windows. to upgrade, you need the correct installation disc

    Hello

    You don't say what you are upgrading.

    Please read this information.

    Windows 7 upgrade paths:

    http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

    Once you have read the foregoing regarding the upgrade paths, please also read this.

    Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

    If this is not available, Windows 7 will not properly work for you.

    Run the "Windows 7 Upgrade Advisor.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

    Check if your specifications are compatible for Windows 7:

    "Windows 7 system requirements"

    http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

    "Windows 7 Compatibility Center" for software and hardware:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    See you soon.

  • Reader XI Customization Installation Wizard does not remove previous versions

    Downloaded the installer msi drive XI and XI Customization Wizard.

    Created installtion STD and setup.ini files, and specified to remove previous versions of the wizard.

    Recorded this and deployed to test machines via WSUS server and third party software, Local Publishser updated and included the mst and ini files update package in.

    XI player installed.

    Reacer 10.1.4 is not uninstalled.

    Checked again and uninstall all previous versions of the player is selected.  Documentation indicates that any version 6 upwards will be uninstalled, but it didn't happen.

    What else is needed for the old version to uninstall when XI is installed?

    TIA

    Rick

    Hi Rick,

    Try to close the Customization Wizard and he raises. Open the same drive package again.does the box remove previous drive appear checked? If Yes, then it should certainly delete the previous version of the player either 10.1.4

    If on the reopening of the whole, the Remove previous drive checkbox unchecked then check and save the package. Now when installing this package, previous drive is removed. I just checked myself!

  • Photosmart Plus B209a-m installation CD is not compatible with Windows 8.1?

    For the ninth time now, after that some updates from HP that I'm no longer able to use the scan function on the HP Photosmart Plus B209a-m all-in-One printer I've owned for more than two years now.  I tried all the things suggested the HP Support Assistant, including the feature troubleshooting and restarting.  So I took the next step in uninstalling the printer and put it back, eventually.  Or try to reinstall, it is.

    I had a Windows 7 HP laptop when I bought the printer, but now I have a newer HP laptop who initially missed out on Windows 8, but has recently been upgraded (?) to 8.1 Windows.  I was able to install the printer, after that I'm the new laptop under Windows 8.  But when I put the CD is no longer allows me now to proceed with the installation.  Of initial pop-up box tells me to click on 'Install', but the only available choice is "quit".  In addition, it has a red square with a white 'X' in the upper right corner of the popup box.  I have never seen that in any of the previous eight times I had to re - install the printer.

    So now what should I do?

    Terry Sullivan

    The original CD was manufactured before Windows 8 or 8.1 have been released, I would suggest downloading the recommended full 8.1 HP here windows driver.

  • I have digital Sony Hanycam and the installation disc is not compatible for Windows 7

    Sony Digital Handycam

    Model number DCR - TRV14E
    Is it possible that I can view and edit the pictures with out having to purchase a costly computor.

    Sony Digital Handycam

    Model number DCR - TRV14E
    Is it possible that I can view and edit the pictures with out having to purchase a costly computor.

    ============================================
    FireWire (IEEE 1394) (Sony i.LINK) (not USB) connection
    in collaboration with Windows Live Movie Maker and Windows
    Live Photo Gallery can be your solution.

    See the following articles:

    How to import photos and videos in Movie Maker?
    http://Windows.Microsoft.com/en-us/Windows-Live/Movie-Maker-import-photos-videos-camera

    How to import videos in Windows Live Movie Maker
    http://www.Dummies.com/how-to/content/how-to-import-videos-into-Windows-Live-Movie-Maker.Navid-323836.html

  • Installation Wizard downloads and runs the HP printer

    Learn how to download and run the wizard to install printer HP (PIW). Printer Installation Wizard allows to solve many common installation problems, such as finding the correct driver for your printer, using your HP printer the same way that you used with your old operating system. Printer Installation Wizard is not available for all products, only works in Windows 7 and Windows 8, and you connect your printer to your computer with a USB cable to run the wizard. For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support. This video was produced by HP.

    I hope you find this information useful.

  • HP installation wizard cannot find a printer

    I am using HP Photosmart C3100 all-in-One on a MacBook Pro. I reinstalled and tried all the quick fixes, but this remains a problem: while I can print fine from my computer, I can't scan. When I use the HP Installation Wizard, there not my printer.  HP Device Manager also cannot find the printer. Oh, how strange! Any help, people? Thank you!

    We invite you with pleasure

    Please remove the current software that is bundles with 10.6 following Uninstall HP under Applications > Hewlett-Packard.

    Once you have finished restart your Mac, download and install the correct software below:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77264-1&cc=us&DLC=en&LC=en&OS=219&product=1146331&sw_lang=

    Then, restart your Mac once more and run the software update to ensure that the most current drivers are installed.

    Please let me know of any problems,

    Shlomi

  • Hyperion 11.1.2.1.0 installation wizard

    Hai all
    I downloaded and extracted the zip of the files associated with hyperion planning 11.1.2.1.0 (Microsoft Windows 32-Bit) installation. All extracted zip files are located in the same place.
    But when I double click the file InstallTool.cmd and the Installation Wizard does not appear in my windows.

    VMWare OS: Windows 2003 (32 bit)


    Kindly guide me to solve this problem.

    Thanks and greetings
    Alizée

    The full path where you extracted the files, if it is the full pathname contains spaces, that it will cause the installer to fail.
    Otherwise from the installer should open a command window, if there is no probloems will display all errors before closing.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Hyperion Planning 11.1.2.1.0 Installation Wizard

    Hai all
    I downloaded and extracted the zip of the files associated with hyperion planning 11.1.2.1.0 (Microsoft Windows 32-Bit) installation. All extracted zip files are located in the same place.
    But when I double click the file InstallTool.cmd and the Installation Wizard does not appear in my windows.

    VMWare OS: Windows 2003 (32 bit)


    Kindly guide me to solve this problem.

    Thanks and greetings
    Alizée

    You have all the spaces in the full path, if so remove the spaces or move to a directory without spaces.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • What can I do when Texas Instruments PCIxx12 Integrated FlashMedia Controller is not compatible with Windows 7?

    I have a gateway C - 140 X for a good 2 years and I find always the best of the class. The current version is Windows Vista Ultimate Edition.  The upgrade path should be got Windows 7 Ultimate, which, incidentally, should some sort of reduction but I understand he must make an economic profit.

    I ran the Windows 7 Upgrade Advisor Beta .

    Report all gave his go-ahead, but one Texas Instruments PCIxx12 Integrated FlashMedia Controller by Texas Instruments Inc. device is not compatible with Windows 7. So I can't upgrade once the device is compatible.

    The obvious answer is to consult the website of the manufacturer of Texas Instruments or gateway OEM.
    The gateway OEM does not help because it has stopped supporting once he sold to MPC, which then went bankrupt while the drivers are available on the gateway site to download only for Windows Vista.
    Looking at the site of Texas Instrument is a maze leading to difficulty finding support on the device in question. I'll try to contact the support from them, but what do I do? I mean the device is able to run Vista and other Texas Instruments products are compatible but just the card reader.

    If you tell me to new contact the third party or the manufacturer's website, then I ask that you give me the link to the support or the driver.

    I tried to control the Windows 7 Compatibility Center , but it is not upward.

    I got it.

    After the upgrade from 32-bit Windows Vista Ultimate 64 bit of Windows 7 Ultimate that required me to do a clean install. I prefer clean install because it is sure that everything works. Yet once I was pounded by an unmanned aircraft. In the hardware Manager, he has been shown as a mass storage controller. I forgot my card reader and more worried about trying to get the driver for the mass storage controller because it seemed important to something. Then I let down, but after a few days, I looked around the same instance in the forums which turns out be my card reader. I went back to the drivers from the website of the gateway for card reader Driver .

    I just installed the Vista driver and now it works. Everything on my computer now works with Windows 7 64 bit by going to manufacturers for devices. Broadcom Bluetooth.
    Wired and wireless from Intel.
    Mass of Intel storage.
    The rest was from Windows Update, check all out them.

    The only thing I feel crazy is that send to Onenote 2007 is not compatible with 64 bit OS and the strength to wait for the next version of Office for it to work.

Maybe you are looking for