OR MAX see GPIB controller/board of Directors, but crashes on test/Scan troubleshooting

Similar Questions

• Error message: this isn't a problem with intellectual property. Board of Directors, but rather with your SQL Server when you visit a Web site.

  Original title: an error occurred in SQL server?

  Hello, I just wanted to go to this site, but this error pops up: error SQL

  An error occurred in SQL server:

  This isn't a problem with intellectual property. Board of Directors, but rather with your SQL Server. Please contact your host and copy the above message.

  «Back to index »

  Please help me, I just moved my computer so I had to disconnect from the internet, but now he has problems.

  Is the site I tried to go to: http://www.minecraftforum.net/topic/227822-166-millenaire-npc-village-076c-duplicate-villager-fix/

  Hey Brainiac,

  1. are you encounter problems with this site?

  2. are you able to connect to this site from a different computer?

  3. were you able to connect to this website before?

  4. you remember to make changes to the computer before this problem?

  The problem seems to be, with the site that you are visiting. You can check if you can access the site from another computer.

  Hope this information is useful.

• Using NI USB-GPIB controller Zeiss C90 CMM control

  I have a Zeiss PCDMIS CMM running 32-bit on Windows XP with PCI GPIB (488.2 2.7.3)

  If the controller is 8 bits, but work with my 32-bit system already, can I export the config VISA file, change on a 64-bit of Windows 7 with a USB to GPIB computer, and import this file into a newer version of the driver 488.2?  (change of bits or a more recent version of 488.2 will be a problem?)

  Hi Ryan,

  As long as you save this export config file, you should be able to load it into the second computer MAX.  I can't find anything that says that there will be problems with the little change.  If you are really worried about it however, give it a try without getting rid of your original computer.

  It seems that you already know how to transfer the settings above, but here's a KB on how to do this http://digital.ni.com/public.nsf/allkb/BF528312C9A5423A862565BC00731EC0.

• Can you change the type of device to 'USB Raw resource' to GPIB controller?

  I'm trying to configure a GPIB FL Contec GP - IB (USB) controller in MAX.  I could so he can register through the creation of a pilot of the Assistant driver VISA, but it fits as a "gross resource USB" rather than as a GPIB controller.  I can send and receive information from the controller, but it does give me an option to search for connected devices of GPIB communicate with them.  Is it possible to change the type of the device, maybe by manually changing the driver created by the wizard of the NI-VISA driver?  Thank you for your time.

  N ° do not use MAX at all. You can just create a GPIB-USB controller on your own. You should contact the seller.

• When I tried to installHoyelpuzzle and Board of Directors, it was installed but that it would not complete the installation

  I installed several card games again and had no problems.  But when I tried to installHoyelpuzzle and Board of Directors, it was installed but that it would not complete the installation. I have

  Windows Explorer and uninstalled until I reinstalled it.  I've done 4 times.  He went all way through the process, than to see a message that Setup could not be resumed.  Given that the other two disks of Hoyle have been correctly installed, why do I have problems with the drive of Hoyle puzzle and board? I contacted Hoyle and does everything that they told me to do.  But without success.  What could I do it wrong?

  Hello

  (1) what is the operating system that you use on the computer?
  (2) you get error codes?
  If you use Windows 7, Hoyle Board Games is not compatible with Windows 7.
  You try to install the game in compatibility mode.
  Click on the below link to check the compatibility of the game.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Hoyle%20Board%20Games&v=Encore&UID=&pf=0&PI=9&s=Hoyle%20card%20game&OS=64-bit
   
  You can check the link below:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
  You can check with the manufacturer of game for patches to run the game on Windows 7.
  http://support.Encore.com/
  I hope this helps!

• Using Agilent USB-> GPIB controller possible

  Hello

  When I have an Agilent USB-> GPIB controller so normally, I have to install the Agilent IO libraries for the windows driver.

  What should I do when I want to use the USB-> GPIB controller in Labview? There, I have NEITHER - MAX-> is the driver included in MAX or what I have to install both programs?

  thx for the help

  No, when you use a controller of NOR, you must NEITHER-488. 2. remember, the VISA is just one api that is above the actual hardware drivers. There is a specific hardware for the controller of Agilent driver and a driver of specific material for a controller OR.

  Where the driver is depends on your version of LabVIEW. On my 8.6 distribution, there is a separate DVD called NI Device Driver DVD.

• X61T works wireless after the replacement of the Board of Directors?

  Hello!

  I have a lenovo X61T, who recently had a Board of Directors system of, after a repair by a local warranty service workshop (CompuCom), we found that the wireless (and fingerprints, scanner...) were not working.

  It seems that LED to my bluetooth on the monitor lights up and works fine, I can be able to snap the cycle as the combo FN + F5, but whenever I try to turn on the Wifi, it does not. I keep on pressing power, and he never replies.

  I can't check the fingerprint sensor is working, but I was able to light up, to scan and connect to wifi networks of this card without any problems from my Ubuntu installation on a separate volume that had no problems with the new motherboard.

  If the wireless card works in linux, so this leads me to think it's vista (32-bit business) that has the problem

  Here's what I did:

  1. Uninstalled and reinstaled drivers (did not remove the driver software, I should try that?)
  2. A ran an update of the system (found that the new bios necessary Council an update, but otherwise I'm keeping my system up to date, check every month at least for new updates)
  3. Turn off the TPM (Client Security Solution) completely (then maybe I need to reset that?)

  I don't know what could be causing the problem, I have tried to set up a connection profile and specify the wireless network and other, but I get an error saying that the wireless radio is turned and press repair to fix the problem, it does not work

  I did save the results and have save them as an HTML file (to see what happens when he tries to shut up... here are some of the messages in the newspaper that I found interesting: (the paper is long enough, so I could send it to someone if they requested))

  ERROR AcSvc (SYSTEM (Prvlg).3360.4068) [9/12] 14:24:20:405 CIpNotify::GetIpAddress: network cable not connected to adapter PCI\VEN_168C & DEV_1014 & SUBSYS_058A1014 Ok AcSvc (SYSTEM (Prvlg).3360.4068) [9/12] 14:24:20:420 GetProfileStatus: addressn Ip obtained for PCI\VEN_168C & DEV_1014 & SUBSYS_058A1014 Ok AcSvc (SYSTEM (Prvlg).3360.4068) [9/12] 14:24:20:452 GetProfileStatus: call AcTcpIpServices::IsValidIP for PCI\VEN_168C & DEV_1014 & SUBSYS_058A1014 Ok AcSvc (SYSTEM (Prvlg).3360.4068) 14:24:20:483 [9/12] AcProfileStatus::AcSvcIsValidIP (CAcLanSettings LanSettings)) EntryERROR AcSvc (SYSTEM (Prvlg).3360.4068) [9/12] 14:24:20:514 AcProfileStatus::AcSvcIsValidIP no valid IP [0.0.0.0]        

  ERROR SvcGuiHlpr (Mike (Prvlg).2304.5200) 14:24:20:826 [9/12] AcDiagnostics::AcDiagnostics: call AcSvcGetWLConnectionStatus() for pnpid = (PCI\VEN_168C & DEV_1014 & SUBSYS_058A1014)

  ERROR SvcGuiHlpr (Mike (Prvlg).2304.5200) 14:24:20:857 [9/12] error Impossible de AcDiagnostics::AcDiagnostics to the adapter object get

  Then I thought about it... Fix anway, would try to Exchange wifi cards and out the keyboard and the palmrest. Found that there are locations for 2 cards, put the card wifi of origin in another location, and before power to set up, wifi worked as if it never failed!

  So I swapped back to the original square and voila, the problem is back. Vista seems to not be happy, but fortunately, I know that the slot works very well since it was detected by linux.

  So ultimately has this amazing piece of hardware continues to grow on me. This is my first laptop class IBM Business and I must say that I am very happy!

• Activation failed for controller board B200 M4 7.0 with UCS Mini 3.0 firmware (2 c)

  The blades of B200 M4 comes with firmware of the controller Office 7.0 and the UCS Mini comes with the latest code of 3.0 (2 c).  Once associated with a Service profile, the firmware controller board 7.0 activation fails.  The blade software 3.0 (2 c) comes with the 6.0 Board controller firmware.  I downloaded the firmware 2.2(5a) blade server package, so that the UCS to 'see' the firmware 7.0.  Then, I changed a bunch of firmware 3.0 (2 c) host to include firmware controller board for the M4 B200 but activation 7.0 still does not work after reboots.  Reacknowledging the blades does not change the result.  Any ideas?

  Michael,

  You did the right thing by adding the 2.2.5a firmware.

  Were you running CLI activation?

  #scope Server X / Y (blade chassis X Y)
  # scope boardcontroller
  # Display image (this will list all versions of firmware)
  # enable force version.0 firmware (Select a version lower than that already running)
  buffer validation #.

  If the foregoing is successful then reset MMIC

  Try--->

  In the firmware of the political host do not check the controller board for the B200M4 leave the field blank. Then manually activate tab firmware installed in the server.

  Kind regards

  Saurabh

• Controller board and B200 M3

  Hello

  What is the controller board? What do I do?

  I need to upgrade a UCS field with 12 B200M3 at UCSM 2.2(1b): do I have to upgrade the controller card?

  which version is right: 11, 5 or 8?

  Any information on edge controller is welcome.

  Thx a lot.

  ARM

  Nicolas.

  PS: pictures as an attachment.

  Hi delahais,

  To answer these questions,what is the controller board? what should I do? Take a look at the link below.

  https://supportforums.Cisco.com/document/29806/what-BMC-and-what-are-TAS...

  I need to upgrade a UCS field with 12 B200M3 at UCSM 2.2(1b): do I have to upgrade the controller card?

  Whenever you upgrade the firmware of your UCS environment is recommend that you upgrade all of the UCS components including the components of the blade as the BMC

  which version is right: 11, 5 or 8?

  It depends on the version of the firmware that your UCS environment is running. For example, if your ucs environment is running firmware version 2.2 (1) and you have b200 m3 blades you want to select later who is 11.

  You can check the correct version by going to the package of blades bundle UCS in UCSM (see attached screenshot)

  Let me know if you have any questions, and if this is the information you were looking for.

• What is the function of the controller board?

  Hello!

  It seems that two series B as well of the C series have dashboard controllers. What is the purpose of the controller board?

  We have the BMC/MMIC for managing the server and read the sensors. The CMC to function as the 'control plan' of the IOM in the chassis. But what made this controller card and why cant I see not before M3 version on the blades?

  I've read a few people saying that the controller card is the same as the BMC/CIMC, but why then cisco would write things like: "once the CIMC firmware is upgraded, upgrade the room controller."

  And I also found this: "Cisco UCS C-Series M3 rack servers have firmware controller board that controls many functions of server such as eUSBs and connectors e/s. You can activate firmware controller board on these servers in a rack.<- is="" that="" not="" the="" bmcs="" function?="" if="" not,="" why="" is="" this="" function="" not="" usable="" in="" the="" m2="">

  Best regards

  Hello

  The controller card and MMIC are two different components. Be aware that the BMC/MMIC are identical from a point of view of terminology.

  The controllers of the Council is to regulate the voltage to the DIMMS to the ECC/UECC errors. The extent of why wasn't in the m1/m2 line (I think the b230 m2s have controllers of the Commission), the m3 line is when the value has been added.

  I hope this helps.

  Justin

• Model number of Board of Directors system satellite 1800 412

  What is the model number of Board of Directors of satellite 1800 412 system?

  Hello

  I found this page.
  http://www.sparepartswarehouse.com/DeviceType-vendor-modelline-modelseries-partList.aspx?DeviceType=0&vendorlevel=ModelSeries & modelseriescatid = 51077 & partcatid = 140747 & filter = 2

  You will find different tips for Satellite 1800. It is not a Satellite 1800 412, but I think it should also work.
  But the best way is to contact the Toshiba authorized service partner in your country. You can order the compatible card of these guys here, and you can be sure it's a good advice.

• For the USB Hi-Speed and Licensing policy GPIB controller

  Hello

  I wanted to confirm understanding licensing NI VISA.

  If I use the GPIB controller OR to the USB Hi-Speed, is NEITHER VISA license are included?  488.2 NOR pilot is that CD is included along so I guess its license.

  In accordance with the licensing policy as long as you are using hardware NOR the license included.

  Here is the sentence that does this is clear.

  "Are examples of products that include the driver NI-VISA LabVIEW, CVI, TestStand, NOR-488. 2, GPIB controllers, PXI controllers, etc. If you do not use a software or hardware, you can buy NI-VISA development software separately. »

  If my understanding is 488.2 and NI-VISA OR license is included if you use the NI GPIB for Hi Speed USB controller.

  Thank you

  ANI

  It's true and you can deploy a runtime of NI-VISA smaller with your executable file.

• LAN at impact software GPIB controller

  I wrote a Labview program on a PC with a GPIB controller to copy card to control an electronic load GPIB using NI VISA and provided seller Labview VIs that use NI-VISA.  I now have to implement the same program on a laptop using a LAN to the GPIB converter or him to talk about the electronic load.

  What is the difference in how this LAN to the GPIB device gets programmed verses a gpib controller direct for the same instrument?  Is the code I wrote already not usable?  What should I write orders direct TCP/IP now out of my Labview program?

  You replace the resource only if you change the instrument gpib address or number of the controller. If you use aliases, you wouldn't change all your code.

• HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  MODEL

  Compaq Presario CQ42-372TU computer laptop

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCac=...

  PLZ ANY BODY HELP ME

  You can upgrade to an SSD.

  The simplest method is to use an SSD as the Corsair Force 3 and don't forget that you buy the kit of migration.

  The migration kit comes with cloning software and a usb to SATA power cable that connects again SSD.

  It is recommended that you purchase and SSD that is approximately 256 GB in quality if you can find one that is affordable.

  SSD with migration in a kit options search I did.

• Error 00ce after replacement of the Board of Directors

  Hi all

  We recently have a defective Board on a m93z, I had a technician who came to change the Board of Directors. After the passage of the motherboard, I got an alert from the bios telling me that the serial number and model are not valid in the bios. I ran an update of the bios of the exe on this site, but it did not work (os version).

  The tech told me that it was easy to change but at the moment, I have no idea what to do.

  should I use winphlash and how?

  Download the iso CD to update the BIOs of your machine. Burn this disc and boot the computer from it. During the update of the BIOs, gives you the opportunity to update the machine/model Type and serial number.