OR-Motion PXI Card Device Status = does not

I can't connect with my motion NI PXI-7358 Controller card.  The general tab in MAX for the map shows that "Device status" = "does not" see the attachment.  I've not mapped and matched the remote device.  I also removed and re-installed PXI card without success.

Hi Jeffmg,

This seems to be a known issue. There is an internal knowledge base documenting this problem and a potential solution.

The solution according to the KB article:

"This problem can occur when a previous jury has been mapped to the host machine. The NIMtnSvr.exe is based on the ID Board and sometimes gets stuck. To resolve this problem, close any software OR run, and then open the Task Manager and end the process of NIMtnSvr.exe. This will disable the server and allow it to start again, the next time that it runs. When you open MAX, the boards will be displayed on the local host that is mapped correctly. »

N

Tags: NI Hardware

Similar Questions

  • T420 W7 Base system device driver does not

    Hello

    After reinstalling W7 the lenovo Solution Center complained by saying that the system device driver does not work.

    I saw that the SD card reader was not working and so I covered the missing pilot was that one.

    The Lenovo page I downloaded the driver for the card Multi for W7 and T420 port. After installing the message disappeared and SD cards have been recognized correctly.

    However, after restarting the system, after some time, the message appeared again and the card reader no longer works.

    I have install again and the same happened. He worked and after restarting two has stopped working.

    If find this mysterious altogether. I wonder if anyone knows how to solve this problem.

    I managed to solve the problem. Just in case anyone has the same problem I explain here how I did, although I'm not sure that this solution is universal.

    1 install the drivers from the Lenovo site.

    2. once the system starts to complain from the Device Manager where it says "Base system device" with a question mark. Then disable this device but do not uninstall the driver.

    3 reboot and it will be fixed.

  • W7 Device Manager does not recognize the Intel AMT devices

    Please help: where can I find - how to install the latest drivers Intel AMT for Windows 7.

    Hello

    Thank you for the question to Microsoft Community. I'll give my best to help you.

    From your problem description, I understand that the Device Manager does not recognize the Intel AMT devices

    What is the brand and model of the computer?

    Check out these links and see if they help.

    Computers that use Intel's vPro technology can have devices that are not recognized in Windows 7 Device Manager

    http://support.Microsoft.com/kb/976728

    Clean installation WARNING: Back up your files before you begin reinstalling Windows, even if you're reinstalling Windows on a hard disk partition. A clean installation replaces the current version of Windows and all personal files.

    If your motherboard supports AMT technology, you can download, install the drivers from this link.

    AMT: Intel® AMT Driver for Intel® motherboards

    http://Downloadcenter.Intel.com/Detail_Desc.aspx?&DwnldID=16936

    Note: This download is valid for the products listed below.

    Intel® card mother DB43LD

    Intel® card mother DQ43AP

    Intel® card mother DQ45CB

    Intel® card mother DQ45EK

    If the problem persists, I suggest you to contact Intel support. http://communities.Intel.com/Community/Tech

  • ENE PCI Secure Digital / MMC Card Reader Controller does not

    ENE PCI Secure Digital / MMC Card Reader Controller does not

    I suggest that you go the manufacturer of your computers website and search for drivers chipset update.

    Click Start, type: Device Manager

    Press enter on your keyboard

    Click with the right button on the controller listed in the tree view of the devices

    Click on uninstall

    Restart your computer and let Windows redetect.

  • NB250/Device Manager does not recognize webcam

    Hello:

    I have NB250 with Windows 7. There is no indication of a webcam. Device Manager does not recognize it either. I know that there is a download application to search for it on my computer but I don't know where to look for it. Thank you.

    Post edited by: chizuka

    Check if the webcam is enabled in the BIOS.
    To access the press of BIOS F2 when starting the

  • I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

    I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

    You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

  • Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

    Hi guys,.

    My Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

    Its not reading any cds/DVDs.

    Please could you help me how to fix it

    Once am put any DVD that the DVD is flashing and after a few seconds, his flashing no more.

    Mine is under WIndows Vista SP2

    I checked the CD-ROM/dvd-rom drivers in its 'active' display ' device working properly "Device Manager and registry also to 'upperclass' or 'lowerclass' settings entry just good.

    Please someone help me how to solve this problem.

    Thanks in advance.

    Kind regards

    Rambeau

    ++

    @bjawasa is 90% out of material. Lenovo ask to change your dvd - rom with a new free of charge if you have the warranty.

    You can call the help line: hindi or English speaking - 1800-3070-0010 (Toll-free) or 1800-113-324 (Toll-free)

  • Device Manager does not display devices

    Control Panel takes me to the MMC, but Device Manager does not display devices

    Hi Bandjo,

    ·         Device Manager is empty?

    ·         You have made any changes recently?

    ·         You have installed Windows XP Service Pack 3?

    Check to see if this article helps you.

    None of the items appear in the device list manager when you open

  • My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

    My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
    Convenience store said to click on properties Insert the diskette and
    Double click on open, but when I do that it stop computer
    and opens the recovery and ask for a correct diskette,

    Hello Tallm,

    Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Device Manager does not display c or D drive.

    The Windows Device Manager does not display the drives c or d.  With File Explorer, they show and are easily accessible.  What's wrong?

    Hi Alberini,

    You would actually use the Device Manager to determine which devices are installed on your computer, update driver software for your devices, check to see if hardware is working properly and change the hardware settings. You can also use Device Manager to update a driver that does not work properly or restore a driver with its previous version.

    To view the files or the drive hard internal to your computer, would use you Windows Explorer.

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Card player AutoPlay does not work. My two computers are networked. How can I fix it for automatic playback works?

    Card player AutoPlay does not work. My two computers are networked. How can I fix it for automatic playback works?

    Hello

    I suggest you to try the steps in the following Microsoft Help article and check if it works.

    Troubleshoot AutoPlay:

    http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

    For more information, see the following link:

    http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

    Hope the information is useful.

  • Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

    * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

    My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

    Hello Teresa,.

    The probable cause of this problem could be due to wrong settings for internet explore.

    Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
    http://support.Microsoft.com/kb/956196/en-us

    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    Hope this helps, please answer with the results for assistance.

  • subscription to adobe illustrator. With my money withdrawn credit card, but subscription does not work (and it doesn't work all day). What do I do?

    I made an annual subscription to adobe illustrator. With my money withdrawn credit card, but subscription does not work (and it doesn't work all day). What do I do?

    I read that it will take as much as 24 hours for a purchase to show your Adobe account

    Your subscription to cloud shows correctly on your account page?

    If you have more than one email, you will be sure that you use the right Adobe ID?

    https://www.adobe.com/account.html for subscriptions on your page from Adobe

    .

    If Yes

    Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

    -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

    .

    If no

    This is an open forum, Adobe support... you need Adobe personnel to help

    Adobe contact information - http://helpx.adobe.com/contact.html

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    -Select your product and what you need help with

    -Click on the blue box "still need help? Contact us. "

  • The country where the card was purchased does not match the country of your Adobe ID.

    I'm from Ecuador and I bought a card edition student and teacher in the United States, but when I want to record the code here in my computer, I got a message says: the country where the card was purchased does not match that of your Adobe ID. You can try to sign with a different ID Adobe or contact us if you need assistance. WHAT CAN I DO?

    "You can try to sign with a different ID Adobe or contact [Adobe] If you need help.

    To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
    Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

    Get help from cat with orders, refunds and exchanges (non - CC)
    http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

  • Research in Motion driver device network does not start

    I spent the last two days, trying in vain to connect my playbook with my computer via usb.

    I tried a lot of things I've read on the messages that other people have done to solve similar/identical problems, but none of them have absolutely made no difference at all for me.

    Quick summary:
    -The playbook has updates.
    -The usb cable is fine as the playbook connects correctly to a different machine of windows 7.
    -The usb ports are fine (tried many of those on this machine), other devices connect without problem.
    -Have you tried Blackberry Desktop and Device Manager, 7 and 7.1.
    -Playbook has wifi off and regular file sharing on.
    -Have you tried to adjust the 'windows' and 'auto-detect' options of connection on playbook.
    -I uninstalled/installed the Device Manager, Office Manager and the individual drivers several times, with and without restarting the computer and the playbook.
    -Turned off firewall and anti-virus
    -Removal of all applications start and all non-microsoft services.
    - And many other things that I forget immediately.

    I don't think that anything I have read that I have not has tried.

    The problem is very specific. The network adapter (Research in Motion Network Device) seems to be able to install correctly but does not start. After installation, for a few seconds, it is said works normally, then change to the yellow triangle with exclamation point and Driver Details indicates that he failed with code 10, although sometimes the error number is different.

    I watched the windows event logs and it has entries by the driver, not to start but no explanation as to why.

    Has anyone else had this problem? And if so, what can I do about it? Please, I've spent days messing around and I can't spend more time on this nonsense.

    It's weird, I never had a problem one of my devices Android or Apple connection to this computer, only this device. Very discouraging.

    Hello

    There is some information on blackberry - deploy here:

    https://developer.BlackBerry.com/native/beta/documentation/com.QNX.doc.native_sdk.QuickStart/topic/r...

    It's for BB10, but it works on the PlayBook as well.

    You must enable the developer mode on the PB. The IP address is the general number of the machine's IP - that gets it to your wireless infrastructure - not the INVESTIGATION period specific developer, which I think is only used for the USB connection.

    The problem with the deployment on wifi, it's BB tends to close the wifi interface, if you do not use it for a while. So, I think that before you deploy, I often use the Web browser on the BB to wake up the network.

    It's all a bit wildfire, to be honest. I'd rather have the USB works, but (for me) which could be a Linux issue, not a BB one.

    Best wishes

    Kevin

Maybe you are looking for