OR PXI-8196 target using a USB stick formatting

Hello everyone,

I use a PXI chassis with controller PXI-8196 and multiple PXI DAQmx cards. I need to format the hard drive on the target of PXI and reinstall the RT operating system as well as all other software. I am trying to restart the PXI with a USB bootable, but it gives me the option to format the hard drive.

Here are the steps I followed.

1. I created the disk bootable with MAX using the RT disc utilities > create Desktop PC USB Drive Utility (PXI-8196 does not have a floppy drive so I have to use a USB key)

2. I have connected a keyboard and screen to target to see it start.

3. I've also adjusted the sequence of boot as the boot option "USB HDD: LEXAR JUMPDRIVE SPORT" among those available in the boot sequence has the highest priority. (My USB is a USB of LEXUS so I'm sure that this particular option must be the first in the sequence).

4 but once I start my system. It does not give me the option to format (according to MAX documentation should give me an option to "format hard drive"). Here's what I see on the screen connected to the target

= = The output to the screen is bounded by these two rails =.

Boot mode safe of Romans...

Enter safe mode.

The IP address is: 10.10.10.2

_

===========================================================================

At the end of the last cursor keeps blinking and nothing happens

5. the 10.10.10.2 IP address is the address in the configuration I want to format and reinstall. So I don't know if he meant to keep automatically previous IP address.

6. to avoid the fact that there may be something wrong with the USB, I repeated the procedure as a whole with another USB drive. But exactly the same thing happens again.

Please help me it reboot with a USB port and format the hard drive and reinstall all software.

Thanking in anticipation.

Vivek.

Hello

Try this, go into the BIOS of the PXI, under LabVIEW RT to the startup configuration, change the Windows option / other OS. Then try what you are doing.

Let me know if it works for you

Tags: NI Hardware

Similar Questions

  • During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

    Hello

    During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

    I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

    Problem: I get the cannot install because it is a GPT partition.

    Y at - there no way to make these 2 USB sticks work?

    Thank you, Brad

    Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

    Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

    The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

    You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

    After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

    If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

    In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

    I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Install an SSD in a Dell XPS 8300 using a USB stick recovery

    My 1.5 as TB HARD drive crashed and I want to replace it with a 240 GB SSD.  I need to use a USB stick recovery to reinstall Win7 in my XPS8300.  I've heard that I need at least as big a player to use the recovery key.

    I will be able to use the USB stick recovery to install Win7 on a 240 GB SSD?

    I buy the Dell USB's recovery since I did not at the time I bought it in 2011.  So, I see that the 240 GB SSD will work.  Thank you.

  • Installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

    Hello

    During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

    I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

    Problem: I get the cannot install because it is a GPT partition.

    Y at - there no way to make these 2 USB sticks work?

    Thank you, Brad

    Rufus can create a bootable copy instead:

    Rufus - credit: Pete bastard/Akeo

    After installing Rufus:

    • Launch it
    • Select the ISO Image
    • Point to the file ISO for Windows 10
    • Check create a disk bootable using
    • Select GPT partitioning to EUFI firmware as the Partition scheme
    • Choose FAT32 NOT NTFS as file system
    • Make sure that your USB in the device list
    • Click Start
    • Close when you are finished
  • Possible to use a USB stick as data store

    I got an esxi 5 installed on a 8 GB USB key, but I want to use all the space on the left.

    I just need to create a really tiny VM, optimized to work on flash.

    Is not production

    Anyone got a way?

    Maybe...

    Download a binary nfsd?

    Download a binary of iscsi target?

    Do some virtual data store?

    Using the magical commands over ssh?

    Help.

    I really want to buy another sata controller + drive hard (there no so small that 8 GB hd now)

    No.... I mean with normal USB virtualization introduced in vSphere 4.1

    In vSphere 5 is fast enough to run a full USB 2.0 emulation.

  • Make Ubuntu 14.04 to Windows 7 using a USB stick bootable Windows 7

    I use Ubuntu 14.04 on an i5 Envy of HP Touchsmart, however, I want to upgrade to Windows 7.

    I have a bootable windows disc 7. I changed in the BIOS boot sequence, so it runs first of usb, but unfortunately it is able to pass on the Ubuntu operating system. I also tried openinig the executable installer using 'wine' of usb and I get this error after clicking on "install Windows 7":

    Error:

    "Windows is unable to find a place to store temporary installation files. To install windows, make sure that a partition on your boot disk has at least 699 MB of free space.  "Error code: 0 x 80070490.

    I have over 200GB of disk space. I think I may have to use "gparted partition editor" but I'm not familiar with it either.

    Use your Ubuntu installation media to format and delete all partitions including the partition of Grub.

    May I ask how you created your bootable Windows 7 USB copy? It is possible, that it might not be bootable. I suggest that you make sure you follow the instructions below to create a bootable copy below:

    After graduating the .iso file, you can use the built-in Image disc burning tool or Microsoft .iso to USB/DVD tool to create a bootable DVD or USB (requires a blank DVD or USB flash to at least 4 GB key).

    After downloading the. ISO file, right click and click burn disc image

    Insert a blank DVD

    Click on burn

    Windows 8/8.1 users can mount the. ISO file and start the upgrade automatically. More here

    Important:

    If you create a USB startup key, make sure the USB is first in the FAT32 format.

    Connect the USB

    Open Computer

    Click with the right button on USB

    Click on Format

    Make sure that FAT32 is selected as the file system.

    For UEFI systems based

    If your computer is UEFI, they are normally the systems that come pre-loaded with Windows 8 or later, you need prepare the ISO for such a configuration file or you will receive an error during installation. The USB key must be formatted in FAT32 and use the GPT partitioning scheme. To do this, you must use Rufus, a small tool that you can download for free.

    Rufus - credit: Pete bastard/Akeo

    After installing Rufus:

    • Launch it
    • Select the ISO Image
    • Point to the file ISO for Windows 10
    • Check create a disk bootable using
    • Select GPT partitioning to EUFI firmware as the Partition scheme
    • Choose FAT32 NOT NTFS as file system
    • Make sure that your USB in the device list
    • Click Start
    • Close when you are finished

    Try to start it again, make sure that you select and remove each partition, select it the disk partition not allocated, click New and then select the larger of the main partition and then click next to install.

  • How to use a USB stick for extra storage

    I try to add the storage to my macbook air 11 inches so I have a USB to sd card and I was wondering how to add this on my main hard drive storage.

    Thank you!

    TheTrueTechie,

    Did you plug in the USB cable to your laptop?

    (psssst: you may want to consider another forum ID/handle)

  • Can I use a USB on an iPad Pro?

    I am looking for an iPad 12.9 pro with a memory of 128 GB. Also obtain loghning usb and keyboard. My question is this: can I use a USB stick with this for transfer autour files?

    For example: I'm starting a word on a desktop document, except at thumb drive and want to continue to work with the iPad Pro. Can I transfer the file to the iPad to change, resave the said folder and then go back on the desk with her?

    Could also transfer other files with this set autour upward?

    I need solutions for mobility and stationery and was looking to use it for small, things go, then an iMac for the intensive stuff.

    My idea would work out?  Thank you for your time and your help.

    You can use the portable hard drives Seagate/Western Digital Wireless

    OR

    These are your only alternatives for of SanDisk USB flash drives.

    https://www.SanDisk.com/home/mobile-device-storage/ixpand

    https://www.SanDisk.com/home/mobile-device-storage/connect-wireless-stick

    Good luck!

  • Recovery USB - stick (DVD player does not) Acer Aspire 7750 G

    Hello world

    My DVD player does not work for quit some time. This is no big problem for me, because one barely use it.

    Unfortunately, it is not possible to burn recovery DVD. In my view, it has an option to do a recovery USB drive. It would be a great solution! Unfortunately I do not have the possibility to do so. Is this only possible for computers without an optical drive? Is it possible to download the program with the option to use a USB - stick as in the YouTube video?

    YouTube instructionvideo

    Thanks in advance,

    Richard

    You can try to work around the problem, since I'm not sure that Acer was already an eRecovery on windows version 7 which allows to create USB recovery media.

    This free software allows you to create a virtual DVD/rw drive and use it to create an iso file, then you can ise this iso file to create a USB stick recovery using rufus:
    of http://www.techsupportalert.com/content/TotalMounter-Free-Virtual-CDDVD-Burner-that-facile-use.htm

    http://Rufus.AKEO.IE/

  • HOW TO USE A USB MODEM 2 PC

    I have a usb modem how I USE MODEM 2 PC (win 7 + win7)

    Hi Arshad,
     
    1. are you using a USB stick modem or is it a USB router?
    2. you are trying to connect the USB modem to two computers at the same time?
     
    I suggest you to refer to the procedure described in the link and check if it helps.
  • Unable to connect to targets PXI - 8196 RT in MAX

    I'm trying to set up the initial connection to my goal of RT (it is a model used, configured by an engineer OR running LabVIEW RT front arrived at our laboratory), but did not have much success.  I have connected the target RT, a PXI-8196, directly on my Windows computer using an Ethernet cable and manually set an IP address for this connection in Windows Network & Sharing Center.  When I try to connect to the target of RT in NOR-MAX, I do the following:--> create a new--> remote device (not on the local subnet) enter the IP address I specified manually.  When I type "Finish", however, I get the following error message: "failed to initialize the remote connection or targets.

    I have disabled the Windows Firewall on the Ethernet port and also downloaded and re-installed PXI Platform Services.  Is there a step I'm missing, or anyone any suggestions of what else to try?

    I use NI MAX version 5.6, Windows 8 running on the host computer and the on-board computer is a PXI-8196.  Thanks in advance!

    I just went through this with another PXI controller.  Absolutely, you don't want the PXI to reach a binding address local 169.254.x.x, because this will allow you to force MAX to connect.

    Start by setting is using your PXI controller upwards with a monitor, so you can see what is happening, and that it address and a keyboard, if you need to enter the BIOS of the controller.

    On your PC, connect an Ethernet cable from the NETWORK adapter that you use for communication PXI for PXI.

    Assuming that your PXI has a 169.254.x.x address, configure your NETWORK card to also have a similar (but different) address, by using a subnet mask of 255.255.0.0 (so the 169,254 pieces must match, but the other two numbers is not guaranteed).

    Now open MAX.  Click on remote systems.  I guess you don't show anything there, and the right pane is empty.  In the right pane, click on «Create a new...» "and select"remote device (not on the local subnet).  Yes, it is on the local subnet, but never mind.  When it prompts you for the IP, put the IP address that the PXI monitor shows like PXI IP.  He must find the controller almost instantly.

    What I'd do next is to configure the IP address that you want to use.  In my case, I use addresses from 10.0.x.x for both my network cards that "speaks" my PXI and PXI.  While MAX talk to your PXI, you can set the IP address, and then restart the PXI - you should see it happen to the new IP address you specified.  Of course, if you change its IP address to a 10.0.x.x address, you will need to change your NETWORK card to also use an address in this range.  Once both have been reset, MAX should be able to find the PXI under remote systems.

    Now, all you have to do is add/remove software and you should be good-to-go.

    Bob Schor

  • Is it possible to copy my files to a USB stick and use it as a backup?

    * Original title: computer problem

    Hi guys, first of all excuse my English because it is not my natural language. My problem is this: I think that my office is stressful on me. It's freezing and sometimes it does not start. I'm trying to back up my files, but I'm not. Is it possible to copy my files to a USB stick and use it as a backup? If so should what files I back up? Is it possible to do a reinstall? I have a Dell OptiPlex 745 with windows vista ultimate. Any help would be welcome.

    Kind regards

    Leslie

    Hello

    How to make a backup of files:

    Go to the file/s you want to put (Documents, music, Photos, etc. in Windows Explorer) > right click on it/them > hover over send it to the mouse cursor > select external hard drive or Memory Stick that you plugged them to save.

    And it's method of Dell to backup your data and reinstall of the operating system:

    Restore your Computer´s software to factory for Windows Vista settings

    http://www.Dell.com/support/article/au/en/aubsd1/SLN117599?c=au&l=en&s=BSD&CS=aubsdt1

    See you soon.

  • Xcdt satellite 2540 - USB port to use a USB key?

    Hello... I would like to give my old Tohsiba (Satellite 2540XCDT) my aunt to use either a connection dial-up / ADSL / ADSL2.

    It has a USB port - this port can be enabled to take a USB? Download a driver for it? Where can I find a driver for this system?

    (Recently I hooked a new Lexmark printer into the USB port and managed to get the printer doesn't work after loading software CD - a little slower than the old connection with the HP Inkject printer, but works nevertheless.) .... Made me think that maybe I could get a memory stick for this?

    Also... Any chance I can still switch from Windows 98 to Windows 2000 online? And it would help at all with performance improvement? Or cause complications more?

    And... ADSL or ADSL2 will be better than just using a slow dial-up? (or is this old system quite simply too slow anyway?)

    ... It used to work fine on just dial-up, although the memory buffer (or course) on video content - and I always think that one probably even with ADSL/2?) ... But things have changed there! (my new Toshiba Satellite XP a is zero, so I don't know how this old system would work these days?) Any comments?

    Hello

    > It has a USB port - this port can be enabled to take a USB? Download a driver for it? Where can I find a driver for this system?

    Looks like you are using Win 98 OS is usually very old new Microsoft operating systems; Windows Me, 2000, XP and Vista include the Generic USB drivers and it is not necessary to install any USB drivers but more old OS like Win 95 or 98 needs USB drivers Win

    See this page:
    http://www.technical-assistance.co.UK/KB/usbmsd98.php

    You would be able to download the USB drivers to use the USB flash memory.

    > Any chance I can still switch from Windows 98 to Windows 2000 online
    No, I don't think this is possible if you want to use W2K then you need to purchase this OS, but since it is an old OS I doubt you could buy this OS.

  • Toshiba Regza 46VL743G - playing files via USB stick

    Hello

    I have problems with playback music and videos via USB. I tried to format my USB for different file systems (ntfs, fat, ms - dos, for example) and video formats, but the screen is black, I launch the media player.

    My TV has played with MS-DOS Format the photos, but no mp3 or divx/avi files. I run the multimedia player with 'video' the led of the USB stick flashes, but after a few seconds the led turn off (I think that the stick loses power).
    My other TV (LG 55LE7510 55 '') plays all video files and mp3 without any problem (ntfs and video format *.avi)

    Someone has an idea?

    Hey,.

    Have you tried another USB key and the same thing happens with another USB key? Usually, you use the FAT32 format for your USB key. Then the TV will be able to recognize it and all the files it contains.

    According to the specifications of your TV supports jpeg files (USB and SD card), MP3 (USB) and video DivX SD (USB).

  • HP require a new 32 G USB stick "" not labeled as compatible with Win 8."

    OS Win Pro 8.1

    Product: HP500-125

    Question: HP Recovery set using the USB.

    Problem: HP require a new USB stick 32 G ""not labeled as compatible with Win 8. "I don't have to buy such a stick in my place (Brisbane, Australia).

    Can you help me?

    CherylG.

    I have for the usb drive that you suggested, and it happened today however it does not resolve the difficulty, even if the product is satisfactory. Consults with the HP support has finally confirmed that the provided HP recovery media software does not work with Win 8.1Pro with media library.

    So, in a way, the problem is solved by default... I used successfully in place of Windows Recovery Media Creator.

Maybe you are looking for

  • How to run a timed loop which exports an iteration by 24 cycles cycle then resets

    Good afternoon: I'm a bit stuck on how to set this up: I need time 24 hours, 1 loop / hour. Each iteration of the loop/hour, I need an output (out of the loop) to activate a particular sequence. I can not understand how to get the loop either 1) put

  • 0x8ddd0002

    When I go to the Windows update site, I get the error code following 0x8ddd0002. That I'm not the administrator. This has also happened with a few programs I want to uninstall as well. In the article on support.microsoft.com/kb 316524 all patches for

  • error 0210: stuck key 7B

    Hello I just upgraded to the most recent updated to Microsoft Update on an IBM Thinkpad T41. A reboot is required, and now I get error 0210: Stuck Key 7B. It doesn't seem to be a stuck key. Help, please! Thank youJoanna Kaul

  • Hello... I m new to this error 13 shows and I need fast response

    Hello... I m at this news and here's some update for windows media player I click Update after the update when I restart the system after that songs do not play but the error is showing the error 13 and I need quick response

  • How can I restart without computer freezing after login?

    so I tried to burn a cd using the zune software, and the computer froze on me, after I restarted, I connected it immediately frozen on me and the screen looked like a TV that has been tuned to a channel that does not exist, essentially static. What d