ORA 12 c install error on openSuse: reference to the "__tls_get_addr@@GLIBC_2.3" undefined symbol
Hello world
I know that Oracle does not support the OpenSuSE, but all previous versions of the database has worked.
With Oracle 12 c, the installation fails. I get the error below.
No doubt someone has a useful idea?
Yours, user8632123.
NEWS: make f /home/oracle/base/rdbms/12.101/precomp/lib/ins_precomp.mk to reissue EXENAME = proc
INFO: make [1]: Entering directory ' / home/oracle/base/rdbms/12.101/precomp/lib'
INFO: Link /home/oracle/base/rdbms/12.101/precomp/lib/proc
INFO: usr/lib64/gcc/x86_64-suse-linux/4.7/... /... /.. /.. (/ x86_64-SUSE-Linux/bin/LD: home/oracle/base/rdbms/12.101/lib//libnls12.a(lxhlang.o): reference to the "__tls_get_addr@@GLIBC_2.3" undefined symbol
usr/lib64/GCC/x86_64-SUSE-Linux/4.7/... /... /.. /.. / x86_64-SUSE-Linux/bin/LD: Note: '__tls_get_addr@@GLIBC_2.3' is defined in OSR /lib64/ld-linux-x86-64.so.2 try so add to the linker command line
/lib64/ld-linux-x86-64.so.2: could not read symbols: invalid operation
INFO: collect2: error: ld returned 1 exit status
INFO: / bin/chmod: can't access to ' / home/oracle/base/rdbms/12.101/precomp/lib/proc'
INFO: no such file or directory
INFO: make [1]: leaving directory ' / home/oracle/base/rdbms/12.101/precomp/lib'
INFO: make [1]: * [/ home/oracle/base/rdbms/12.101/precomp/lib/proc] error 1
NEWS: make: * [proc] error 2
I use opensuse 12.3 and I have this error too.
My solution is
(1) backup (ORACLE_HOME) / lib/stubs, and then delete.
(2) change RMAN_LINKLINE in the {ORACLE_HOME}/rdbms/lib/env_rdbms.mk file
TO
RMAN_LINKLINE = $(LINK) $(OPT) $(S0MAIN) $(SSKRMED) $(SKRMPT).
$(LLIBDBTOOLS) $(LLIBCLIENT) $(LLIBSQL) $(LLIBPLSQL).
$(LLIBSNLSRTL) $(LLIBUNLSRTL) $(LLIBNLSRTL).
$(LLIBSLAX) $(LLIBPLSQL) $(LIBPLCN) $(LINKTTLIBS) - lons
(3) all reissue them.
Tags: Database
Similar Questions
-
I'm unable to install SETTLERS II 10TH ANNIVERSARY op system 2000/XP (XP recommended) processor 1.4 Ghz (I have 1.6 Ghz) memory 1 Gb (which I have). I get so far as to accept terms and conditions click 'accept' and then click 'next' and I get the message "The Settlers II is not responding" and then the window hangs and I have to stop to get rid of. I have other games that the State on the box, they are compatible, but the same thing happens with them also. Before that all happened, I installed successfully, played and then uninstalled the game Settlers II oringinal.
Hi dandylion,.
Thank you for using the Microsoft Answers forums.
Run utility windows install cleanup in your computer and then try to install these games.
Download the Windows install cleanup by visiting the link below.
http://support.Microsoft.com/default.aspx/kb/290301
If the problem still persists then try to install in clean boot mode.
To enter a mode of clean boot on your computer, follow these steps.
1. click on start, type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after starting the computer, try to install these games.
http://support.microsoft.com/kb/331796 . In addition, refer to the section on how to restore your computer to a Normal startup mode
Hope this information is useful.
Let me know if it worked.
Thank you, and in what concerns:
Umesh P - Microsoft Support
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.
-
I'm not sure when the problem occurred, maybe 2-3 weeks ago and trying to create a restore date system before the 'problem'... the dates do not go far enough?
Hi Kabramble,
· Did you the latest changes on the computer?
Check out the link to the Apple Web site and try the steps mentioned below.
Bugs and Error Messages
http://discussions.Apple.com/thread.jspa?threadID=786774
For further assistance, you can post your request in the forums of Apple.
http://discussions.Apple.com/category.jspa?categoryID=150
You will no more find system restore points if they are not created.
Restore points are saved until the system restore reserves HDD space is filled. As new restore points are created, old ones are deleted. If you disable the Protection System (the feature that creates restore points) on a disk, all restore points are deleted from this drive. When you turn System Protection, new restore points are created.
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
a Lexmark 7600 Series printer will not print - cant install error 0x000003eb
I can't print with my wireless lexmark 7600 printer, we have changed the ink cartridges, which is what I thought the problem was and I bought lexmark ink cartridges. I have now uninstalled the printer and installed it again, in the end, it gives an error message saying it can't install error 0x000003eb. She completed the page alignment ok, we know what to do next, or what may be wrong, I followed all the advice of troubleshooting without result!
Hello
1. what operating system do you use?
2 did you change on your computer?
3. that all troubleshooting have you tried?
Method 1:
If you are using windows vista, I suggest you to follow the links and check out them.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Network printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
Method 2:
I also suggest you to contact the manufacture of your printer and check.
http://support.Lexmark.com/index?channel=supportAndDownloads&page=home&locale=en&UserLocale=en_US
-
"Reference to the error object not set to an instance of an object."
Why after an automatic update of windows 7, I get this error "error object not set to an instance of an object reference"?
Hi AHurst,
1. When you receive the error message?
2. the updates have been installed on the computer?
Check if the problem persists in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Restart the computer to return to normal mode
If the problem does not still in safe mode, and then perform the clean boot procedure to verify if a third party installed on the computer program is causing the error message.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: genuine
Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - F4GJK - KG77H-B9HD2
The Windows Product Key hash: iJAth4TbScMi8HdcPurlASXdEkw =
Windows product ID: 89578-OEM-7332157-00204
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6001.2.00010300.1.0.003
ID: {1875E091-75B7-41D8-958B-843FB221316C} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0x00000000
Build lab: 6001.vistasp1_gdr.100218 - 0019
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: 6.0.6002.16398Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: 2.0.48.0
OGAExec.exe signed by: Microsoft
OGAAddin.dll signed by: MicrosoftOGA data-->
Office status: 100 authentic
2007 Microsoft Office system - 100 authentic
OGA Version: Registered, 2.0.48.0
Signed by: Microsoft
Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_70AFE6BE-656-80070057_E2AD56EA-815-80070057Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{1875E091-75B7-41D8-958B-843FB221316C} 1.9.0027.0 6.0.6001.2.00010300.1.0.003 x 32 *-*-*-*-B9HD2 89578-OEM-7332157-00204 2 S-1-5-21-3856123575-3819749968-2084870378 Dell Inc.. XPS M1330 Dell Inc.. A12 20080708000000.000000 + 00032323507018400F8 0409 0409 Eastern Standard Time(GMT-05:00) 0 3 DELL M08 100 100 2007 Microsoft Office system 12 36C3896821FDB0 Cj14tOk8/me2hXF/W2AM1dxJcsw = 89451-OEM-6672833-45175 4 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6001.18000
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89578-00146-321-500204-02-1033-6001.0000-2972008
Installation ID: 002291501995125740168792437623497931990145071114719384
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: B9HD2
License status: licensedWindows Activation Technologies-->
N/A--> HWID data
Current Hash HWID: OgAAAAEABgABAAEAAQABAAAAAwABAAEA6GEAhAqefPQSeei4YNEM8kaDuLdEnPL0mEaGdW4LrFZGyg ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
REFERENCE DELL M08 APIC
FACP DELL M08
HPET DELL M08
STARTING DELL M08
MCFG DELL M08
M08 DELL SLIC
SSDT PmRef CpuPmHi crawlerpa,We have checked for Service pack 2 KB9481332 and the error code 8007321. Unfortunately, not found no information on this subject. We recommend you to cross check if the number you entered is correct and provide us with the exact error code.To download and install Service Pack 2, click download the Service Pack 2Kind regards
Syed - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hotfix required for the update install error Code: 0x800F0100
Hello
Ive tried installing updated KB2562937 nine times, whenever the installation fails with the error Code 0x800F0100, can someone help me solve this problem.
XP Pro SP3 operating system.
Thanks in advance.
otev
Hi otev,.
Before windows updates, follow these methods.
Method 1: Reset the Windows Update components.
http://support.Microsoft.com/kb/971058
Method 2: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3: Put the computer in a clean boot State prior to update installation to see if there are any software conflict as the clean boot helps eliminate software conflicts.
Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.
You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
Reference: http://support.microsoft.com/kb/906602
-
Cannot install Service Pack 3. Get the error code 0 x 80240036
Original title: update
Download tells me service pack 3 will not install error report 0 x 80240036
Hi, Corneille,.
From your problem description, I understand that you can not install Windows XP Service Pack 3 and get an error code 0 x 80240036. I understand the inconvenience.
(1) you are able to install all other updates successfully?
(2) how you try to install Service Pack 3? Is it through Windows Update or Stand alone package?
(3) have you made recent changes to the computer before the show?
I suggest to perform the steps in the following article and check if it helps.
How to troubleshoot an installation fails in Windows XP Service Pack 3: http://support.Microsoft.com/kb/950718
Warning to temporarily disable security software: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Reference:--
Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717
It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
-
Sending a message using UTL_SMTP, get the error ORA-29278: SMTP temporary error
Hi all
I try to send mail from oracle plsql. for that I use the below mode operative but unfortunately not able to move forward.
procedure isSQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod PL/SQL Release 10.2.0.1.0 - Production CORE 10.2.0.1.0 Production TNS for 32-bit Windows: Version 10.2.0.1.0 - Production NLSRTL Version 10.2.0.1.0 - Production
call you as followsCREATE OR REPLACE PROCEDURE send_mail (p_to IN VARCHAR2, p_from IN VARCHAR2, p_message IN VARCHAR2) AS l_mail_conn UTL_SMTP.connection; l_reply utl_smtp.reply; l_smtp_host VARCHAR2(50) := 'smtp.gmail.com:25'; l_smtp_port NUMBER := 25; BEGIN l_mail_conn := UTL_SMTP.open_connection(l_smtp_host, l_smtp_port); utl_smtp.EHLO(l_mail_conn, l_smtp_host); utl_smtp.command(l_mail_conn, 'AUTH LOGIN'); utl_smtp.command(l_mail_conn, utl_raw.cast_to_varchar2(utl_encode.base64_encode(utl_raw.cast_to_raw('[email protected]')))); utl_smtp.command(l_mail_conn, utl_raw.cast_to_varchar2(utl_encode.base64_encode(utl_raw.cast_to_raw('mypwd')))); l_reply :=UTL_SMTP.mail(l_mail_conn, p_from); dbms_output.put_line( l_reply.code || ' ' || l_reply.text ); UTL_SMTP.rcpt(l_mail_conn, p_to); UTL_SMTP.write_data(l_mail_conn, p_message || UTL_TCP.crlf || UTL_TCP.crlf); UTL_SMTP.quit(l_mail_conn); END; /
and the errordeclare conn utl_smtp.connection; smtp_domain VARCHAR2(256) := null; BEGIN utl_smtp.command(conn,'STARTTLS'); utl_smtp.helo(conn, smtp_domain); send_mail(p_to => '[email protected]', p_from => '[email protected]', p_message => 'can i get message.'); END; /
I checked in Control Panel that IIS is installed and also SMTP is configured.ORA-29278: SMTP transient error: 421 Service not available ORA-06512: at "SYS.UTL_SMTP", line 21 ORA-06512: at "SYS.UTL_SMTP", line 97 ORA-06512: at "SYS.UTL_SMTP", line 159 ORA-06512: at line 5
I am able to ping HOST SMTP thro' TELNET
and I changed the parameter, SMTP_OUT_SERVER, as
I don't get no idea. is this due to use the GMAIL Server?ALTER SYSTEM SET SMTP_OUT_SERVER= 'smtp.gmail.com:25' scope = both
Oracle 10 g and Windows version is XP - SP3
Thanks for any help
Concerning
KnockaertWhen I googled for "Gmail PL/SQL" I find a lot of things, including the articles of blog with code examples. How about you?
-
UTL. MAIL error ORA-29279: SMTP permanent error: 501 syntax of address error in
Hello
I'm new to the forum please excuse if I post not properly without standards.
We need to send mails using the UTL. MAIL package and installed them on the database.
Whenever I try to send an email, I get the following error:
ERROR on line 1:
ORA-29279: SMTP permanent error: 501 syntax of address error in
[email protected]
ORA-06512: at "SYS." UTL_MAIL", line 654
ORA-06512: at "SYS." UTL_MAIL", line 671
ORA-06512: at line 2
The test code that I am running is:
BEGIN
UTL_MAIL. Send (sender = > 'test < [email protected] >',)
recipients = > "[email protected]"
subject = > 'test UTL_MAIL subject. "
message = > "UTL_MAIL test body");
END;
I tried different combinations:
BEGIN
UTL_MAIL. Send (sender = > "test"< [email protected] >"")
recipients = > "[email protected]"
subject = > 'test UTL_MAIL subject. "
message = > "UTL_MAIL test body");
END;
even tried
BEGIN
UTL_MAIL. Send (sender = > '[email protected]',)
recipients = > "[email protected]"
subject = > 'test UTL_MAIL subject. "
message = > "UTL_MAIL test body");
END;
Whenever I get the same error.
It seems to work with a server exchange e-mail, but never on the SMTP server.
In the SMTP address of the sender server logs is not to have the <>of brackets unlike other emails that are sent to the course.
It seems that the SMTP server is quite strict and the SMTP administrator will change all the settings on the server.
The version of oracle is as follows
Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production
Could you please help me with a solution.
Some how the brackets are undressing (which usually UTL MAIL package), is it possible that I can include the brackets.
Published by: 984757 on January 29, 2013 02:56
Published by: 984757 on January 29, 2013 02:57I don't like UTL_MAIL - UI abstraction clumsy and poor and not very well written.
Had a look at the code. It does this:
WHILE (ALL_RCPTS IS NOT NULL) LOOP UTL_SMTP.RCPT(MAIL_CONN,'<' || GET_ADDRESS(ALL_RCPTS) || '>'); END LOOP;
The process function GET_ADDRESS() ALL_RCPTS parameter, returns the address 1 of him and updates (in and out) parameter with the remaining string.
SQL> var address varchar2(200); SQL> exec :address := '
,[email protected]'; PL/SQL procedure successfully completed. SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address ); [email protected] [email protected] PL/SQL procedure successfully completed. SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address ); [email protected] address= PL/SQL procedure successfully completed. SQL> The address is explicitly surrounded by square brackets in accordance with RFC. So what needs to see your SMTP server.
If this isn't the case-maybe then our UTL_MAIL versions do not match. I don't remember what version I pulled and unpacked UTL_MAIL package code I have.
Personally, I stopped using the UTL_MAIL earlier. Missing in may points. I wrote my own e-mail package that supports multiple attachments, formatting complex Mime, attachments of 20 + MB in size and so now - running on the UTL_SMTP interface (which provides for mail transport layer). And for the problems you are having, I suggest considering using UTL_SMTP directly.
Published by: Billy Verreynne on 29 January 2013 12:52
(Updated with names of entities HTML code for the code snippet to render correctly) -
ORA-01031: insufficient privileges error?
Hello
I changed the password for user SYS and SYSTEM. I can connect before changing
sqlplus "/ as sysdba" automatically.
but now I can not connect and it gives me ORA-01031: insufficient privileges error.
But if I type SYS user name and his password I can connect.
for example:
-------------------
oradw@trdw1test:/ORCL/bin > sqlplus "/ as sysdba".
SQL * more: version 9.2.0.8.0 - Production Thursday, May 26, 16:21:17 2011
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
Enter the user name: sys as sysdba
Enter the password:
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production
With partitioning, OLAP and Oracle Data Mining options
Release 9.2.0.8.0 - Production jserver
SQL >
-------------------------------
I created the new password file, but still I can not connect. I checked the user of the OS, but we never touch any configuration.
Could you please help me how can I solve this problem?
DB version: 9.2.0.8
greetings and thanksCheck your sqlnet.ora file in ...db_1\NETWORK\ADMIN (default)
If in file
# This file is actually generated by netca. But if customers choose to # install "Software Only", this file wont exist and without the native # _authentication, they will not be able to connect to the database on NT._ SQLNET.AUTHENTICATION_SERVICES = (NT)
to take
SQLNET.AUTHENTICATION_SERVICES = (NTS)
-
How to install Firefox on Opensuse 11.4 29
I intend to install Firefox on Opensuse 11.4 29
29 Firefox as last selenium (used for the automation of GUI) supports up to 29
OpenSUSE 11.4 due to my project requirements.
After you have installed Opensuse 114, I knew this version of firefox by default is 4.0b12.
I met under the site
https://en.openSUSE.org/Additional_package_repositories#Mozillabut this does not indicate a 29 Firefox version.
Thank you
Notice the b9 as that means it was beta version 29,0 9. In other words, that he could ask for an update to the latest beta version of 36.0
https://FTP.Mozilla.org/pub/mozilla.org/Firefox/releases/29.0.1/
-
Hello, I did a disk eraser and reinstalled everything (to clean computers), then when I had to reinstall firefox I had a problem. I play a game called Fallensword. He has a script called Fallenswordhelper. So I installed GreaseMonkey, then when I tried to install the scripts said "Script cannot be installed error: failed @require json2.js. I did it for my computer every year since I started to use computers. I've never had this before. Please help me to get a fix for this, because I google it and cannot find an answer.
I am the original author of FallenSwordHelper. It was due to some changes in GreaseMonkey 0.9.0, which made it impossible to have local scripts.
I did an update (temporary?) so that extra all scripts (such as json2.js) now use absolute URLS.
See also the official website of FSH
-
Error with Wi - Fi for the night: "no hardware installed.
Hello
I am writing to a very painful problem occurred a few days ago (8 Feb). I went back to my Mac, a Mac Book Pro 13 "(fin 2011) and I found the wi - fi completely turned off, with an alarming"no hardware installed"error." Here is a screenshot:
Ethernet works fine (thankfully).
As a first step, I have re-installed OS X El Capitan (10.11.3), without wiping the hard drive. Nothing has changed.
Then I restored the system of my time since the standby Machine. Yet once, nothing has changed.
I also bought a USB wifi, USB Asus N10 Nano, but still no sign of life since Wi - Fi.
Here are a few screenshots of the information system:
Network/Wi-Fi
Hardware/USB
I don't know what to do next or where to look further.
Any tips?
Thank you very much!
Nicholas
In some cases, this problem is caused by a hardware failure. A loose connection, a short circuit or microscopic pause in a weld joint can open and close according to temperature, making intermittent failure.
Please test after taking each of these steps you have already taken it. Back up all data before making any changes.
1. Disable Bluetooth. If you have a desktop Mac, you will need a wired keyboard and mouse to take this step. Those that are useful to have anyway, because Bluetooth is not totally reliable. If a Wi - Fi connection works with disabled Bluetooth but not when you turn it on, remove all the pairings in the Bluetooth preferences panel and recreate them. Restart the computer and then test again.
2. There are some reports that the problem has been solved by unchecking the box marked
Continued access to the Wi - Fi network
in the tab of the energy saver preferences window power adapter. I can't confirm.
3. reset the NVRAM.
4. reset the system management controller.
5. start in recovery mode. In the menu bar of the OS X Utilities screen, there is a menu of Wi - Fi. Try to connect.
6. triple - click anywhere in the line below on this page to select this option:
/Library/Preferences/com.apple.Bluetooth.plist
Right-click or Ctrl-click on the highlighted line and select
Services ▹ reveal in Finder (or just to reveal)
of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash.
* If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
7. an appointment of 'Genius' to an Apple Retail Store, or select another authorized service provider.
-
Cannot use the references in Subvi cluster (error 1055, invalid references)
Hello
I'm going through a lot of that through a cluster to a Subvi.
The idea here is to manipulate objects in the MainVI in the nodes property thorugh Subvi, which gains the reference number of the cluster.
In the Subvi, I use unbunling by name to access the references I need. However, I get an error 1055 (invalid references) every time I try to access the object by using the node property.
What I am doing wrong?
Attached you will find three files:
The mainVI: Main.vi
The Subvi: Single_Cam_RefBased.vi
The def of the type for the cluster: RefClusterTypeDefinition.ctl
Thanks in advance,
Marcel
SteveChandler wrote:
The constant you have wired to the bundle is not the same as the cluster of type defined wired to your Subvi.
I was going to say the same thing. This should be the first thing to try. (I haven't studied the Subvi, but it seems buggy too...)
COMMENT: Again something is screwed in the current VI which makes no sense. Hovering above the terminal should tell us information about the corecion, but in this case it is said that the terminal is something like a cluster of error. This might just be a cosmetic bug...
Maybe you are looking for
-
33 Firefox extension for all users
How can I make an extension available for all users using Firefox 33?I have the as and extract if necessary?
-
Cannot connect my Satellite L to the printer
Why my lap top does not send a command to the my printer?I tried a new USB cable and USB ports, it shows that the jets of ink are empty. I have connected my other laptop and all is well. Can someone give me some advice?
-
Is this the same one that the market or to start up your computer?
-
I pasted in the middle of the upgrade to window 10
I stuck in the middle of the upgrade to window 10 then I shut down the system and turn it back on and system does not start, how to recover my previous window?
-
All of a sudden, when I try to open a site on the internet for a site (store selling crafts in Monona, wi) I get a page of advertising that has no place to remove. I have to turn off my computer wrong to start all over again. And regardless of the s