ORA-1405 in alert log

Similar Questions

• ORA-12545 alert.log anti spam

  Hello

  Windows 2008 server x 64

  Oracle 11.2.0.3 x 64

  Client reported the response time very slow with the database; especially with the initial connection to the database. STATSPACK reports do not seem to show anything unusual. What is good, and it may or may have an effect on the performance of the connection, is an abundant amount of ORA-12545 error in the alert.log from the database server, so much so that since May 1st the alert.log won 300 MB in size for this single error! Precise moments show messages in the listener.log but this newspaper does not provide any error and said just that the connection has a flag "establish".

  Couple questions

  1. Within the messages it says "Tracing not lit not." - which trace must be activated and how I can further debug?
  2. When the search for the error number, it seems that this message should be on the client side and not in the alert.log to database. This makes me believe that perhaps the database trying to make connections to some other db or similar and generates this error because the tnsnames.ora servers cannot be configured for such connection. My premise is false?

  Here is the full error:

  ***********************************************************************

  Fatal OR connect error 12545, connect to:

  (LOCAL = NO.)

  VERSION INFORMATION:

  AMT for 64-bit Windows: Version 11.2.0.3.0 - Production

  Oracle leaves NT Protocol adapter for 64-bit Windows: Version 11.2.0.3.0 - Production

  Adapter protocol NT Windows NT TCP/IP for Windows 64-bit: 11.2.0.3.0 - Production Version

  Time: May 23, 2014 10:37:57

  Tracing not lit.

  AMT error struct:

  NS main err in code: 12545

  TNS-12545: Connect failed because target host or object does not exist

  NS secondary err code: 12560

  NT main err in code: 0

  NT secondary err code: 0

  NT OS err code: 0

  abandonment of opiodr treat unknown ospid (7604) following ORA - 609

  Thank you

  -joel

  In general, you now know which pollute the file alert_SID.log

  This is the code that runs on the Server DB that tries to access a remote database & fails.

  Oracle DB is the victim; not the culprit.

• CREATE/ALTER/DROP instructions and alerts log

  In the Oracle (12 c) Administrator's Guide under "monitoring errors with Trace files and alert newspaper ' is the following:

  Alerts log is a chronological record of the messages and errors, and includes the following items:

  -Any internal (ORA-00600), errors (ORA-01578) block and corruption blocking errors (ORA-00060) that occur

  - Administrative, operations such as CREATE, ALTER, and DROP statements and instructions STARTUP, SHUTDOWN and ARCHIVELOG

  -Messages and shared server process and dispatcher functions errors

  -The errors that occur when automatic refreshing a materialized view

  -The values of all initialization parameters that have default values at the time where the departure of the database and instance

  My question is about the second point (in bold).  I might be accused of not followed my journal to alert as closely as I should, but I have not noticed the CREATE/ALTER/DROP instructions in there.  I went to one of my test cases and created a table. No message was written for the journal of alerts.  I did a logfile switch just to make sure I was looking at the right file.  Yep - the switch is in the newspaper.  I dropped my test table - once again, no alert log entry was created.

  So my question is if the above is a documentation error or am miss me a piece of the puzzle?

  Hello

  It would really help if you posted a link to the document you are referencing, such as

  http://docs.Oracle.com/CD/B28359_01/server.111/b28310/monitoring001.htm#ADMIN11242

  The ball before the one you pointed out said «All the internal errors...» »

  The ball that you pointed out does not say "All", so I interpret that as meaning only some of the most remarkable commands CREATE, ALTER, and DROP are recorded, for example CREATE TABLESPACE or ALTER SYSTEM.

  Like you, I think that literature should be clearer on this point.

  Below is the article you cited, there is a link:

  http://docs.Oracle.com/CD/B28359_01/server.111/b28310/diag001.htm#CHDHEGBH

  which goes into a little more detail on this stuff is saved.  They are mostly all systemically important things, not things like creating a package, or editing a table individual users.  When the part you highlighted speaks of 'administrative operations, such as CREATE, ALTER, and DROP statements ', I think they're trying to distinguish certain types of CREATE, ALTER, and DROP statements, for example, things that only highly privileged users such as SYS or SYSTEM can do other, more frequent, CREATE, ALTER, and DROP statements.  Again, this is largely what I read in the literature, based on my experience.  Would be nice if the documentation is more explicit on this subject.

• How to create an incident rule to control of the 12 c Cloud Control alerts log errors

  I have a feeling it will be blinding in retrospect. I have 12 c Cloud control effective against a dozen guests and many DBs I have a rule defined for a database Instance that contains many points of interest - such as FRA filling. I chose each alert metric to see with the alerts log, including 'Generic Alert Log Error'. But I get error messages that appear in the alert log, as ORA-10173.

  Also, is there somewhere in the doco, or a data dictionary view, I can list all the parameters available?

  Thanks, helped these docs. It seems that Oracle has replaced generic monitoring with specific elements of monitoring, but it lacks some interested. However, the doc shows how this can be turned on again. Shame that it's hidden.

• ORA-16038: sequence of log 2 422 cannot be archived

  Hello

  I have a problem, when I try to start a database:

  SQL > the judgment;

  ORACLE instance stops.

  SQL > startup open;

  ORACLE instance started.

  Total System Global Area 1577058304 bytes

  Bytes of size 1305760 fixed

  964690784 variable size bytes

  603979776 of database buffers bytes

  Redo buffers 7081984 bytes

  Mounted database.

  ORA-16038: sequence of log 2 422 cannot be archived

  ORA-19504: cannot create the file «»

  ORA-00312: wire 2 1 online journal:

  "+ DATAGROUP/frge/onlinelog/group_2.354.833381221".

  ORA-00312: wire 2 1 online journal:

  "+ DATAGROUP/frge/onlinelog/group_2.355.833381221".

  Thank you

  Hello

  Please check your alert log content, that the location of the log file of the alerts can be found throughout this sql:

  SQL > select * from v$ diag_info;

  also, check out this site refrence: http://itbloggertips.com/2013/05/oracle-not-started-database-startup-fail-with-ora-16038-ora-19809-ora-00312-error/

  Kind regards

• Strange errors in the alerts log

  Hi, as someone relatively new to Oracle, I need help in the identification of errors in the oracle alert log.
  
  
  ORA-12012: error on auto run 92712 work
  ORA-29282: invalid file ID
  Thu Mar 14 23:17:50 GMT 2013
  
  I know that nothing should be running at 23:17 on the database, so I can only assume it is a work of maintanance - but how do I identify exactly what it relates to, and what is the error?
  
  Kind regards

  Error: ORA 12012
  Text: error on auto work
  -------------------------------------------------------------------------------
  Cause: Some sort of error was captured everything by making an automatic execution of a
  jobs.
  Action: Examine errors that accompanies it for more information on why the execution failed.

  SELECT * from user_jobs

  looking for id

• Average time of recovery in the alerts log

  Hi Experts,
  
  I found the following statement in the alerts log. my version of the 11.2.0.2.0 database - 64 bit.
  
  FAST_START_MTTR_TARGET 60 is too low, to the minimum achievable MTTR 61 rather helps - in my alertlog.
  
  I have found that whenever you set fast_start_mttr_target to a value other than zero, and while the MTTR is what WE, Oracle Corporation recommends that you disable (value 0) the following parameters:
  
  LOG_CHECKPOINT_TIMEOUT
  
  LOG_CHECKPOINT_INTERVAL
  
  FAST_START_IO_TARGET
  
  The values that I found in my database.
  
  fast_start_mttr_target integer 60
  
  log_checkpoint_interval integer 100000
  
  log_checkpoint_timeout around 1200
  
  FAST_START_IO_TARGET integer 0
  
  My question is will I have to perform no action, what I found in the alerts log. I read on the fast_start_mmtr_target according to my understanding
  
  The fast_start_mttr_target defines the average time effective to the target for recovery (MTTR), expressed in seconds.
  
  The default value of fast_start_mttr_target is 300 seconds (5 Minutes). and the maximum we can give 3 600 (1 hour).
  
  Administrators specify a (delimited) target time to complete the phase of recovery of cache recovery with the fast_start_mttr_target initialization parameter.
  
  Please suggest your ideas.
  
  Thanks in advance.

  Without knowing why, this parameter has been set to a specific value (in this case 60), I suggest you not change to something else. In general, the init.ora parameters are defined for some reason, I hope that logic.

  HTH
  Srini

• an error of tns in the alerts log

  I migrated to the 11g database and continuously see below in the alert log file
  
  thread 1 cannot allot of new newspapers, sequence 2762
  checkpoint is not complete
  currently Journal # 2 seq # 2761 mem # 0:E:\redo1a.log
  currently Journal # 2 seq # 2761 mem # 0:E:\redo1a.log
  advance of wire 1 to record the sequence of 2762
  
  Fatal OR connect error 12170
  
  version information
  AMT for 64-bit windows 11.2.0.1.0 -.
  Oracle leaves NT windows 64-bit adapter protocol
  adapter to Windows's NT NT TCP/IP protocol for windows 64-bit version
  follow-up not lit
  AMT error struct
  main error code 12535 ns.
  
  TNS:operation TNS-12535 has expired
  secondary error NS: 12560
  NT main err in code
  
  What is it.is it normal duuring connection or something needs to be done

  its expected and normal behaviors in 11g

  You can change the old method, specifying

  DIAG_ADR_ENABLED_ = off
  

  in the listener.ora

  http://docs.Oracle.com/CD/E11882_01/network.112/e10835/listener.htm#BGBDIBFA

• A lot of ORA - in my alertPROD.log

  Hello
  
  EBS 11i (11.5.10.2)
  RHEL 4.6
  
  I scoured our database alert logs and I see a lot of following items:
  1)
  ------------------------
  ORA-01555 caused by the following SQL statement (query length s = 1286790742, SCN: 0x056d.6f011aeb):
  Mon Oct 11 17:52:22 2010
  SELECT TO_CHAR(REQUEST_DATE,'MM/DD/YYYY') FROM APPS. OE_ORDER_HEADERS_ALL WHERE TO_CHAR (ORDER_NUMBER) =: B1
  ------------------------
  2)
  ------------------------
  ORA-1652: unable to extend segment by 212992 temp in the SYSTEM tablespace
  ------------------------
  3)
  ------------------------
  [ORA-07445: exception encountered: core dump [ptmak () + 106] [SIGSEGV] [address not mapped to object] [0 x 8] []]
  Mon Oct 18 17:27:57 2010
  ------------------------
  4)
  ------------------------
  Instance of warning: Oracle running on a system with a file descriptor open low
  limit. Set your system to increase this limit to avoid
  serious performance degradation.
  ------------------------
  
  Have you seen this in your alert logs too?
  How solve you this error please...
  
  
  Thank you very much
  
  Ms. K

  Hello

  If the sendmail does not work and you have messages that are not sent, is expected to find these files - see (Solaris [TM] 9 & Solaris [TM] 10: default mailx cannot send e-mail without Sendmail daemon running [1003382.1 ID]) and the changes in behavior of Sendmail introduced in Solaris [TM] 9 [ID 1004793.1] for more details. If you don't mind not receiving these emails, you can delete these files.

  Thank you
  Hussein

• error of the oracle database to send alerts log

  Hi all
  
  actually I'm wondering about the status of database mail, and is the error produced in the last 24 hours in the critical mission of oracle 10.2.0.1 database every day... I set up SMTP and UTL_MAIL on the server but do not know how to send alert.log error and listener.log in the last 24 hours?
  
  I can handle the other requirements, but it will really be difficult to mail that a few lines and error codes occurred in the last 24 hours in the alert.log file.is there any table in the database that records all error messages written in the alert.log with description?
  
  I have my using RHEL5.2 ACE. so any help will be much appreciated...
  
  Thanks and greetings
  VD

  Hello

  How can I insert the latest 24 hours of UTL_FILE data? I have that in mind to create the file and send it and there is no parameter "attr_inline" I think it shows mesga ein mail itself...

  I do not have you here.

  so, how can I insert 24 hours of data in this file?

  For this you have to use some OS commands to read the data of alertlog last 24 hours being transferred to the tempfile.

  Try to play the file using UTL_FILE and type checking 'ORA' messages and if found none and then concatenates the string to clob variable and you can use it in utl_mail.

  I use this code to read the log file of the last until the (300) limit in size. It will return the contents of the logfile from lastline.

  UTL_FILE. FSEEK (F1, flength - 300);
  I'm in reverse 0... Flength-2
  loop
  Start
  -utl_file.fseek (F1, null,-2);
  UTL_FILE.get_line (F1, Err1);
  Exp_error: = Exp_error | LRC | Err1;
  exception
  When no_data_found then
  UTL_FILE. FCLOSE (F1);
  p_Exp_error: = Exp_error;
  "exit";
  -output when Err1 is null;
  end;
  end loop;

  Kind regards
  CGI

• Errors in archiving in the alerts log

  Hello
  
  I have an Oracle Database 9i (9.2.0.7) for which I shot on the mode of arhivelog a week ago. In this PB in the alerts log there following errors:
  
  Arc1: Evaluating archive log 1 thread 1 sequence 1221
  Arc1: Impossible to archive log 1-wire 1 sequence 1221
  Newspapers archived by another process
  Arc1: Evaluating archive log 2 thread 1 sequence 1222
  Arc1: Impossible to archive log 2 thread 1 sequence 1222
  Newspapers archived by another process
  
  and there is no message like "Archiving completed" because of another problem - there was a mistake in specifying the format of newspaper. The of log_archive_format is incorrectly set to 'DB001_%s_%t_%r.arc' so also there is another trace file that says that:
  
  SESSION ID: (9.1) 2009-03-11 08:42:00.023
  ORA-00294: format specifier invalid archivelog 'r '.
  
  (There are two things: 1) to change the format of journal archive
  (2) to deal with the other issue: impossible to archive log 2 thread 1 sequence 1222
  Newspapers archived by another process
  
  What is the process to do this? Will be grateful for the help. The database is now.
  
  Thank you
  Cedric
  
  Published by: orausern on May 1st, 2009 01:14

  orausern wrote:
  Thanks for the suggestion, I tried it, but it gives an error like:
  ERROR on line 1:
  ORA-02095: specified initialization parameter is not editable

  In addition to the parameter log_archive_format isn't editable session or system. My concern is that since this error is over a week old, it will allow me to close the db itself (when I get the permission to do so), or there will be a problem if I try to close the db, then restart. so I do not know how...

  Thank you
  Cedric

  I guess you took bad, this setting can be changed indeed but the effect of this would come at the next startup only one, this is a static setting.

  http://download.Oracle.com/docs/CD/B10501_01/server.920/a96536/CH195.htm#REFRN10089

  If you need to do something like that,

  alter system set log_archive_format= scope=spfile;
  

  Do a reset and setting of parameters entered into force. No matter what dba account must be able to change this setting, but for the bounce of the db, you must have Sysdba privileges. This setting won't make your startup or a stop, they should go ahead without problem.

  HTH
  Aman...

• ORA - 376 encountered alert server SMG-3506

  Hi team,
  
  I have a with 9 GB undo tablespace, I think to create a new and remove an old
  to decrease the size.
  
  I do these steps:
  
  stop immediately;
  startup restrict;
  CREATE THE "UNDOTBS02" UNDO TABLESPACE
  ALTER system set undo_tablespace = undotbs02;
  Shutdown;
  start-up;
  
  Now, I want to remove the old undo tablespace
  alter tablespace undotbs1 offline;
  
  and have this msg in the alert.log
  
  Completed: ALTER TABLESPACE "UNDOTBS1" CONNECTION NORMAL offline
  Wed Mar 25 23:15:54 2009
  ORA - 376 encountered alert server SMG-3506
  
  Is correct my process?
  
  I use this version
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for 64-bit Windows: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production
  
  Thans
  
  Published by: mauro brn on March 26, 2009 12:36 AM

  Mauro brn says:
  a question:

  before the fall, I put on the tablespace online?
  and then
  DROP TABLESPACE including THE CONTENT;

  You can remove a tablespace online or offline.
  but in this case, it's still better than it already is in offline mode as it is an obvious sign that nobody uses.

  And before the fall of check
  sqlprompt > show parameter undo_tablespace;

  A new undo it points to the tablespace.

• Oracle errors in the alert.log

  Hello guys,.
  
  I have the setup of the Oracle Release 10.2.0.1.0 Server follows:
  -Windows 2003 Server SP2
  -3.25 GB of RAM (I think it's a 4 GB but it's a windows 2003 standard edition)
  -2 Intel Xeon Quad core
  -3 disk partitions (C - > 40 GB, 25 GB free / E-> 100 GB 85 GB free / F 300 GB-> 270 GB free)
  
  The PRISM instance configuration is:
  ARCHIVELOG: TRUE
  SGA size: 584 MB
  Full PGA size: 40 MB
  Services running (OracleDBConsolePRISM, OracleOraDb10g_home1TNSListener, OracleServeicePRISM)
  
  
  The problem is that there are only 5 users who use this database, but there are a lot of errors in the alert.log that makes the database is unavailable, the error messages are like this:

  Mon Feb 16 16:31:24 2009
  Errors in file e:\oracle\product\10.2.0\admin\prism\bdump\prism_j001_11416.trc:
  ORA-12012: error on auto execute of job 42567
  ORA-00376: file ORA-00376: file 3 cannot be read at this time
  ORA-01110: data file 3: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\PRISM\SYSAUX01.DBF'
  ORA-06512: at "EXFSYS.DBMS_RLMGR_DR", line 15
  ORA-06512: at line 1
   cannot be read at this time

  The content of prism_j001_11416.trc is:

  Dump file e:\oracle\product\10.2.0\admin\prism\bdump\prism_mmon_4620.trc
  Mon Feb 16 11:07:33 2009
  ORACLE V10.2.0.1.0 - Production vsnsta=0
  vsnsql=14 vsnxtr=3
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With the Partitioning, OLAP and Data Mining options
  Windows Server 2003 Version V5.2 Service Pack 2
  CPU                 : 8 - type 586, 2 Physical Cores
  Process Affinity    : 0x00000000
  Memory (Avail/Total): Ph:1981M/3325M, Ph+PgF:3612M/5221M, VA:1278M/2047M
  Instance name: prism
  
  Redo thread mounted by this instance: 1
  
  Oracle process number: 11
  
  Windows thread id: 4620, image: ORACLE.EXE (MMON)
  
  
  *** SERVICE NAME:(SYS$BACKGROUND) 2009-02-16 11:07:33.480
  *** SESSION ID:(161.1) 2009-02-16 11:07:33.480
  KEWRCTLRD: OCIStmtFetch Error. ctl_dbid= 1515633963, sga_dbid= 1515633963
  KEWRCTLRD: Retcode: -1, Error Message: ORA-00376: file 3 cannot be read at this time
  ORA-01110: data file 3: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\PRISM\SYSAUX01.DBF'
    *** SQLSTR: total-len=328, dump-len=240, 
        STR={select snap_interval, retention,most_recent_snap_time, most_recent_snap_id, status_flag, most_recent_purge_time, most_recent_split_id, most_recent_split_time, mrct_snap_time_num, mrct_purge_time_num, snapint_num, retention_num, swrf_version}
  *** kewrwdbi_1: Error=13509 encountered during run_once
  keaInitAdvCache: failed, err=604 
  02/16/09 11:07:33 >ERROR: exception at dbms_ha_alerts_prvt.post_instance_up308: SQLCODE -13917,ORA-13917: Posting system
   alert with reason_id 135 failed with code [5] [post_error]
  02/16/09 11:07:33 >ERROR: exception at dbms_ha_alerts_prvt.check_ha_resources637: SQLCODE -13917,ORA-13917: Posting syst
  em alert with reason_id 136 failed with code [5] [post_error]
  02/16/09 11:07:33 >parameter dump for dbms_ha_alerts_prvt.check_ha_resources
  02/16/09 11:07:33 > - local_db_unique_name (PRISM)
  02/16/09 11:07:33 > - local_db_domain (==N/A==)
  02/16/09 11:07:33 > - rows deleted (0)
  02/16/09 11:07:33 >ERROR: exception at dbms_ha_alerts_prvt.check_ha_resources637: SQLCODE -13917,ORA-13917: Posting syst
  em alert with reason_id 136 failed with code [5] [post_error]
  02/16/09 11:07:33 >parameter dump for dbms_ha_alerts_prvt.check_ha_resources
  02/16/09 11:07:33 > - local_db_unique_name (PRISM)
  02/16/09 11:07:33 > - local_db_domain (==N/A==)
  02/16/09 11:07:33 > - rows deleted (0)
  *** 2009-02-16 11:07:41.293
  ****KELR Apply Log Failed, return code 376
  *** 2009-02-16 11:08:35.294
  ****KELR Apply Log Failed, return code 376
  *** 2009-02-16 11:09:38.294
  ****KELR Apply Log Failed, return code 376
  *** 2009-02-16 11:10:41.295
  ****KELR Apply Log Failed, return code 376
  *** 2009-02-16 11:11:44.296
  ****KELR Apply Log Failed, return code 376
  *** 2009-02-16 11:12:29.328

  And this is an excerpt from the listener.log file:

  TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-FEB-2009 11:05:44
  
  Copyright (c) 1991, 2005, Oracle.  All rights reserved.
  
  System parameter file is e:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  Log messages written to e:\oracle\product\10.2.0\db_1\network\log\listener.log
  Trace information written to e:\oracle\product\10.2.0\db_1\network\trace\listener.trc
  Trace level is currently 0
  
  Started with pid=9212
  Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=akscl-mfs15.am.enterdir.com)(PORT=1521)))
  Listener completed notification to CRS on start
  
  TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
  16-FEB-2009 11:07:25 * service_register * prism * 0
  16-FEB-2009 11:07:31 * service_update * prism * 0
  16-FEB-2009 11:07:34 * service_update * prism * 0
  16-FEB-2009 11:07:37 * service_update * prism * 0
  16-FEB-2009 11:07:57 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=PRISM)(CID=(PROGRAM=\\akscl-mfs15\PRISMPM\PRISMPM.EXE)(HOST=xx-W20972)(USER=CSC3157))) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.225.7)(PORT=1607)) * establish * PRISM * 0
  16-FEB-2009 11:07:58 * service_update * prism * 0
  16-FEB-2009 11:07:58 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=PRISM)(CID=(PROGRAM=\\akscl-mfs15\PRISMPM\PRISMPM.EXE)(HOST=xx-W20972)(USER=CSC3157))) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.225.7)(PORT=1608)) * establish * PRISM * 0
  16-FEB-2009 11:07:58 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=PRISM)(CID=(PROGRAM=\\akscl-mfs15\PRISMPM\PRISMPM.EXE)(HOST=xx-W20972)(USER=CSC3157))) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.225.7)(PORT=1612)) * establish * PRISM * 0
  16-FEB-2009 11:07:59 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=PRISM)(CID=(PROGRAM=\\akscl-mfs15\PRISMPM\PRISMPM.EXE)(HOST=xx-W20972)(USER=CSC3157))) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.225.7)(PORT=1613)) * establish * PRISM * 0
  16-FEB-2009 11:07:59 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=PRISM)(CID=(PROGRAM=\\akscl-mfs15\PRISMPM\PRISMPM.EXE)(HOST=xx-W20972)(USER=CSC3157))) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.225.7)(PORT=1614)) * establish * PRISM * 0
  16-FEB-2009 11:08:01 * service_update * prism * 0
  16-FEB-2009 15:05:26 * (CONNECT_DATA=(SERVICE_NAME=PRISM)(CID=(PROGRAM=C:\Program Files\Microsoft Office\OFFICE11\EXCEL.EXE)(HOST=xx-W21498)(USER=csc2682))) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.131)(PORT=1999)) * establish * PRISM * 0
  16-FEB-2009 15:05:27 * (CONNECT_DATA=(SERVICE_NAME=PRISM)(CID=(PROGRAM=C:\Program Files\Microsoft Office\OFFICE11\EXCEL.EXE)(HOST=xx-W21498)(USER=csc2682))) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.131)(PORT=2000)) * establish * PRISM * 0
  16-FEB-2009 17:33:26 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2513)) * establish * PRISM * 0
  16-FEB-2009 17:33:26 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2514)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2515)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2516)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2517)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2518)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2519)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2520)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2521)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2523)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2524)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2525)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2526)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2527)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2528)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2529)) * establish * PRISM * 0
  16-FEB-2009 17:33:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=PRISM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=144.180.227.18)(PORT=2530)) * establish * PRISM * 0
  16-FEB-2009 17:33:29 * service_update * prism * 0

  Please need help to solve this problem, cordially.

  Cristian Orellana says:
  Hello

  Thank you for the time, I already read something about recovery logs, but everything indicates that the redo log should be smaller and more groups, it's a small database like already post, only 5 users working in there.
  Do you think I need to increase the size of the redo log members?

  Kind regards.

  Without no doubt... but I would certainly add two members of each group and spread members around you to the disks. In its current form, with only one member of each group, if you lose a redo log, you have no redo data recovery. Problems of performance aside, your database is at risk.

• Creating the external Table to alert log

  Hello
  
  I create an external table in oracle database 11g for the alert log file monitoring (to find the ORA errors), I used this statement to create an external table
  
  Create the directory TESTForAlertLog as 'E:\oracle\product\10.2.0\admin\db\bdump '.
  
  create table Alert_Log)
  Message varchar2 (30),
  Date of the day
  )
  (external) Organization
  type oracle_loader
  Default directory TESTForAlertLog
  (settings) access
  records delimited by newline
  fields ended by ',' possibly framed by "" "
  missing field values are null
  (
  "Message."
  'DAY' DATE 'DD MM YYYY ".
  )
  )
  location ("alert_db.log")
  )
  reject limit unlimited;
  
  Output is
  
  DAY OF MSG
  
  ORACLE V10.2.0.1.0 - Production vsnsta = 0
  ORACLE V10.2.0.1.0 - Production vsnsta = 0
  ORA-1109 marked during: ALTER DATABASE CLOSE NORMAL...
  ORA-00313: open failed for the members of the group log 1 of thread 1
  ORA-00312: thread 1 1 online journal: ' E:\ORACLE\PRODUCT\10.2.0\ORADATA\db\REDO01. JOURNAL"
  ORA-27041: could not open the file
  ORA-00313: open failed for the members of the Group of newspapers wire 2 1
  ORA-00312: wire 2 1 online journal: ' E:\ORACLE\PRODUCT\10.2.0\ORADATA\db\REDO02. JOURNAL"
  ORA-27041: could not open the file
  ORA-00313: open failed for the members of Group 3, Journal of thread 1
  ORA-00312: wire 3 1 online journal: ' E:\ORACLE\PRODUCT\10.2.0\ORADATA\db\REDO03. JOURNAL"
  ORA-27041: could not open the file
  ORACLE V10.2.0.1.0 - Production vsnsta = 0
  ORACLE V10.2.0.1.0 - Production vsnsta = 0
  
  But I need the eyes of output like this
  
  
  DAY OF MSG
  
  ORACLE V10.2.0.1.0 - Production vsnsta = 0 lun 22 dec 13:10:48 2008
  ORACLE V10.2.0.1.0 - Production vsnsta = 0 lun 22 dec 13:10:48 2008
  ORA-1109 marked during: ALTER DATABASE CLOSE NORMAL...
  ORA-00313: open failed for the members of the group log 1 of thread 1
  ORA-00312: thread 1 1 online journal: ' E:\ORACLE\PRODUCT\10.2.0\ORADATA\db\REDO01. JOURNAL"Mon dec 22 13:10:48 2008
  ORA-27041: could not open the file
  ORA-00313: open failed for the members of the Group of newspapers wire 2 1
  ORA-00312: wire 2 1 online journal: ' E:\ORACLE\PRODUCT\10.2.0\ORADATA\db\REDO02. JOURNAL"Mon dec 22 13:10:48 2008
  ORA-27041: could not open the file
  ORA-00313: open failed for the members of Group 3, Journal of thread 1
  ORA-00312: wire 3 1 online journal: ' E:\ORACLE\PRODUCT\10.2.0\ORADATA\db\REDO03. JOURNAL"Mon dec 22 13:10:48 2008
  ORA-27041: could not open the file
  ORACLE V10.2.0.1.0 - Production vsnsta = 0
  ORACLE V10.2.0.1.0 - Production vsnsta = 0
  
  I need the message and time of the message occurred
  
  No idea... is it possible to get this output...
  
  
  Thank U very much
  
  Concerning
  
  SHAN

  Read this - he explains how:
  http://www.singleQuery.com/2007/02/read-the-alert-log-with-SQL/

• Why my alert log file is not updated

  Dear all,

  Please find below my workplace

  OS - Windows server 2012

  version - 11.2.0.1.0

  Server: production server

  I checked my alert log file, there is no entry in recent day. He finally stopped on August 31. Please find entry line last two in the alert log file

  Mon Aug 31 10:30:23 2015

  Archived journal 72088 extra for each sequence 1 79292 0x38b3fdf6 dest ID thread entry 1:

  Why it is not updated after August 31.

  Please help me on the rest of my points

  (1) is there a way to know why he is not up-to-date.

  (2) If an order wrongly manually to alert the log entry, so how can I take to update as usual.

  Please make sure that you review the correct alerts log by using the following query:

  SELECT THE VALUE

  V $ diag_info

  WHERE name = "Diag Trace"

  If this is the right place, then perhaps there is no activity that should be recorded in the log of alert since August 31.

  You can manually print something for journal alerts to check this using:

  Exec DBMS_System.ksdwrt(2, 'TEST');

  Alternatively, you can manually run the command of journal and see if new lines are written to the log of alerts using the following command:

  alter system switch logfile;