Oracle APEX server requires a user name and password of the server said XDB?

Hello

After you install version 5.0 of the APEX and tries to access the page admin APEX with EPG, I am invited with a pop-window that asks you a user name and password for the XDB?

Does somone has experience with it? What can be wrong in the configuration?

Thank you in advance.

Kind regards.

Hello

I found the problem.

Is there somwthing wrong in the security settings.

I re - run one of the steps with the right parameters of the call:

DBMS_NETWORK_ACL_ADMIN.append_host_ace

There is an error in the settings.

Now, I'm working.

Kind regards.

Tags: Database

Similar Questions

  • HP printer requires a user name and password

    My wireless HP Deskjet F4583 printer does wonders with my Windows XP.

    Now, we have all upgraded to Windows 7 (very grumpy - everything works perfectly on XP)

    Tried feel secure by the wireless network ('I have' put in place) and suddenly get this:

    "10.0.0.3:80 server requires a user name and password.
    The server said: printer HP Networking @. »

    followed by the appropriate fields.

    So now what?

    Since when was a user name / password available - believe me I would have tried to omit creating the network - we do not have time to 'play' with our gadgets. We just expect that they can operate with minimum fuss.

    Help, please...

    Hi WJacobson,

    This printer does not require a username or password to print on it as long as it is connected to your wireless network. From what you explain, it sounds like the user name and password information required for access to your network. Follow the steps outlined in the document below to make sure everything is configured properly.

    Installation of the software of the printer on a wireless network

  • Netopia-3000 server requires a user name and password

    Original title: Netopia-3000

    It is an error message that I receive. I do not know what it is or why. It blocks my use of the internet for what it is. If you knkow how to get rid of it, or why I get this message please let me know. Thank you

    The 192.168.1.254 to Netopia-3000 server requires a user name and password.

    Hello

    Don't know if that's exactly what you're looking for, but this thread lists how to get online using Netopia 3000. http://www.Netopia.com/support/hardware/TechNotes/CQG_121.html

    I would also post questions in the support section of the site that I listed above.

    I hope this helps!

  • the wpad.home to the dsl router server requires a user name and password

    I recently downloaded some files for Silverlight and Microsoft Microsoft Security Update.  Now I started to get this message when I start my computer that says "the wpad.home of the dsl router server requires a user name and password", there also a warning that this information is requested on a non-secure server.    I hit Cancel and the window disappears and everything works, but I'm afraid that I picked up a virus and I don't want to put the password of my router in this screen.  Is this really a thing of Microsoft, or do I have some type of virus?  I run all my virus software and it found nothing, but I'm still worried.  Is any way to get rid of him?

    I have a Windows 7 64-bit system.
    Thank you.
    Beverly Graham

    It's Malware...  Thank you for the help :)

  • Requires a user name and password

    I have widows XP machine that does not require a user name and password when re-booting and/or marketing.  Where is the setting I can change to require a username and password?

    Hello MathewSwenson,

    You can make changes in the user account window.

    1. open Control Panel.

    2. click on the user account icon.

    3. click on the link to change accounts.

    4. in the window account to change, click the user you want to change.

    5. in the user window, click on change my name and make the necessary changes, and then close this window and click on change password.

    6. Finally close the user accounts window

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

    Vista - Windows 7 network connection. username and password is unknown.

    Hello

    I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

    If someone could answer this question, it would be great.

    Hello
    Maybe this can help.

    Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

    Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

    Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

    Public share
    = network Public (as Internet Café) in order to reduce security risks.

    For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

    http://www.ezlan.NET/Win7/net_name.jpg

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq.html#trusted
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    ------------------------------

    If your network consists only of Win 7 and you want a simple network, use it.

    http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

    After you have configured the homegroup, scroll to the bottom for the Permission/security section.

    -----------------------------

    Win 7 networking with other version of Windows as a work network.

    In the center of the network, by clicking on the type of network opens the window to the right.

    Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

    http://www.ezlan.NET/Win7/net_type.jpg

    Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

    Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

    Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
    Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    -------------

    If you have authorization and security problems, check the following settings.

    Point to a folder that wants to share do right click and choose Properties.

    In the properties

    Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

    This screen shot is to Win 7, Vista menus are similar.

    http://www.ezlan.NET/Win7/permission-security.jpg

    The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

    When everything is OK, restart the network (router and computer).

    * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

    * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

    ---------------------

    *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • local user name and password if the ACS server fails

    Hello

    I have every router and switch configuration for authentication of the connection via the ACS server.  I used these 12 lines below and it works very well.  Each engineer has their own account.

    AAA new-model
    AAA of default login authentication group Ganymede + activate
    the AAA authentication enable default group Ganymede + activate
    AAA authorization exec default authenticated if
    AAA authorization commands 15 default group Ganymede + authenticated if
    AAA accounting exec default start-stop Ganymede group.
    orders accounting AAA 15 by default start-stop Ganymede group.
    Default connection accounting AAA power Ganymede group.
    AAA - the id of the joint session

    RADIUS-server host x.x.x.x
    RADIUS-server application made
    radius-server key, regardless of

    ----------------------------------------------

    I would add to this a local username and password so that if the ACS server was offline engineers have yet to connect with a knowledge of username and default password

    username privilege 15 secret mypassword MYUSERNAME

    line vty 0 4
    local connection

    Q. How do I make ACS a first preference and connection server only local users username and password if the ACS server is down?

    Kind regards

    Kevin

    Now you have the password to enable as the fall back method:

    AAA of default login authentication group Ganymede + activate

    Change 'enable' for 'local' and the local (to the router) database of user names and passwords is used.

    The same works to activate authentication (the second line "authentication, aaa... ("in the config that you posted).

  • User name and password for the installation of VUM on 5.1

    During the installation of VUM you mush, enter a user name and password.  I am referring to the screen that says

    vCenter Server Information

    Enter in vCenter Server location and credential information

    "Please provide the necessary information on the server vCenter Server below.  VSphere VMware Update Manager will need this information to connect to vCenter Server on startup"

    Admin@system-domain should be used for this as it is used for component inventory server and vCenter facilities, or if you have a dedicated account for this other than admin@system-domain?

    If I used admin@system-domain during initial installation, what is the impact of the removal of the admin@system-domain to have privileges in vCenter Server?

    Thank you


    all credentials are for performs authentication in vCenter initially and they won't be reused.  I would like to use a domain account that is part of the Administrator role in vCenter.

    It is not a service account, VUM runs as local system.

  • What is the default user name and password of the dynamically created edge NSX gateway?

    Hello

    I created a NAT device on request and as part of it, but an edge gateway. What is the default user name and password to connect to the edge device?

    Thank you

    Pankaj

    I do not know the password by default, but you can either define easily. Just go to the network security &--> NSX edges, select your edge, click actions and identification of Climate change information. You can also enable SSH from there.

  • How to pass a user name and password in the URL for report BI Publisher as parameters

    Hi all

    I have a requirement to navigate to a specific report in the BI Publisher a

    external application when the user clicks on a link. I've had this work using

    the link below

    https://blogs.Oracle.com/XmlPublisher/entry/accessing_xmlp_enterprise_repo

    Now, when a user clicks on this link he is redirected to the BIPUBLISHER login page,

    How can we get around this to hardcode a username and password in the URL (like GO

    URL for analytics).

    Thank you

    Hello

    https://> /Analytics/Saw.dll? Answers & NQuser => & NQpassword =>

    Kind regards

    Dilek

  • How can I add user name and password in the target of the shortcut

    I have several shortcuts that require different from the username and passwords then my logon credentials.
    I know that there should be a way to add the username and password in the target of the shortcut.

    I found several online orders, but none of them does not seem to work.

    following commands were tested:
    / u: Administrator /p:P@ssw0rd!
    u user_name-p password
    -l votre_nom_utilisateur - pw votre_mot_de_passe
    UserID = user/password
    / User UserName /pwd password
    / username username /pwd password

    Hello

    1. Your computer is on the field?
    2. What application do you need to save your id and passwords?
    3. Are you referring to online applications?

    If the computer on the domain, I suggest you contact the technet forum, where we have some support professionals who are well equipped with the knowledge on area issues, to do that please visit the link provided below.
     
    http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  • Not able to access the files of Windows 8 on a Windows XP-based computer on a network"requires a user name and password"

    I have a similar problem since an update of MS on a computer laptop XP and laptop W8.  Using a LAN cable, I can access the files from the XP laptop in the laptop W8 but suddenly not the other way around;  requiring a stranger Enter username and password .  MS is gradually becoming more and more hostile user!

    Separated from http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/how-can-i-disable-the-enter-network-password/5d9e2967-e946-4eb8-9173-e99de93af049

    Check this link and make sure that the settings are carried out in accordance with article.

    http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Watch the video of thehttp://windows.microsoft.com/en-in/windows/networking-home-computers-running-different-windows#networking-home-computers-running-different-windows=windows-7 link

    Thanks Peinium Dicki ,
    I had to renew the password of guest on the XP computer account then the LAN has worked well.
  • Windows Mail requires a user name and password I forgot

    Not much more to say other that how can I reset these two identifiers which have not been invited because in about two years, I have been using Vista Business.

    See you soon

    Paddo

    Call your ISP or your server, they have your track record, everything.

    As to why we asked you username and password, one more possible reason is your AV (anti-virus) program.
    Find out if your AV enabled option of electronic analysis. If so, please disable this option.
    Have you changed your AV program in 2 years? And changed what?

    t-4-2

  • about stored user name and password on the XP computer

    Hello
    I have a question about stored username and password on XP pro computer.
    If you go into control panel - user - accounts select the account name and there is an option to click on manage my network passwords.
    I have this computer from someone and I checked the "window system" under control panel, under the name of my computer, it says that this computer is part of the Working Group, not in the network domain.
    but I checked the manage my network passwords window and I found a saved username something like that...

    • Server: domainname.com
    • username: www.domainname.com/something

    This server name, address domainname.com, that I found on the list seems to exist as a real Web site and that the stored information seem to be created automatically for some reason any (not manually), but I was wondering what it is exactly...
    This means that my computer (my user account) is a network of area or participate in a domain network? or is it just to access the site online?

    Here's the link talking about stored username and passwords on XP, http://support.microsoft.com/kb/306541
    but I'm still confused because they speak of domain or the domain network? and my computer is in the Working Group, not in the domain network according to panel system from my computer window.

    If anyone can help me with an answer, I would really appreciate it!

    Thanks in advance.

    This means that my computer (my user account) is a network of area or participate in a domain network? or is it just to access the site online?

    Certainly, your computer is not connected to a domain or a domain environment. If you use your computer at home without any connected networks, it is not connected to a domain as such. By default, a computer would belong to a workgroup.

    You just leave things as they are.

  • Help me to change user name and password on the login page text

    Hi all

    My requirement is to change the username and password text on the UID and PWD connection page

    I followed the steps in the Guide of Oracle Access Manager Customization Chapter 4

    But he is not having changed in the login page

    Please help me

    Thank you.

    Published by: user10648177 on December 1st, 2008 01:02

    Hello

    What you really need to do is edit the oblix/lang/en-us/msgctlg.xsl file, change the values of the variables MUserName and MPassword as you want and restart the server identity. Of course, if your language is not en - us, you need to interpret the above path accordingly.

    Where did you find the instructions you need to change the oblixbasemsg.xml?

    -Vinod

Maybe you are looking for