Oracle Database Express Edition used in a stand-alone database
I have developed databases for years in access. I had a lot of people want me to databases for them. I don't want to make databases in access and then have to worry about sending a database to a different State and then find out that the user has a different version of access installed and it does not work properly.Can I use Oracle database Express edition to create a database with a front end that I can send to others and they can install on their computer and run it? Or do need to install the full Oracle Express? In other words, is there like a version of the Runtime?
user13756579 wrote:
I saw that you had to install twice last night, messed up my password. The only thing that that worries me is the database always current running on the user's computer, when well even that they could not use the database for months at a time. These databases are of small databases to keep the data of the members of the group. That is to say. name, address, phone number, personal information and perhaps a scanned document or two.I have looked at other database programs, but won't put a lot of money if I could develop only 3-5 small databases annually.
You can develop your application in such a manner, that it will start service Oracle XE and stop it at the exit. Set the service to start manually. That's all.
Tags: Database
Similar Questions
-
I am using oracle 11g express edition, how I can change the service name and the port number?
I am using oracle 11g express edition, how I can change the service name and the port number?
What do you mean by "port number"? HTTP port (usually 8080), or listening port (normally 1521)?
To change the name of the service, you can use (as a DBA or SYSDBA)
SQL > alter system set service_name = '
'; -
Cannot uninstall or reinstall oracle 10g express edition w/Server 2003
Hello
I need help from you all, I have installed oracle 10g express edition in
Windows 2003 server in the drive d but I can't delete because the oracle not in
Add Remove program so I download the windows install clean up to remove
but after deletion, always in the program all I still can start and stop the
database but cannot go to the homepage of database. The error message (installation
cannot proceed as service OracleServiceXE is present on the system. Remove the
service, restart the translated retry installation) can someone guide me to use
command prompt to remove.
My email address [email protected]
Thank youGoTo D:\oraclexe\app\oracle\product\10.2.0\server\BIN
and clik cleanup.bat. This should eliminate OracleXE servicethen re - install XE (or) delete oraclexe folder and oracle logs and try to install.
-
Oracle 11g Express Edition is available?
Hi all
Could you please tell me if Oracle 11g express Edition is available whether or not?
Thanks and greetingsThere is no official communication about the 11G release date express edition.
You will have to wait and watch the official Oracle site for this.
Also check this:
http://News.techworld.com/applications/3203909/Oracle-stalls-over-11g-express-release/
http://PCWorld.about.com/od/businesscenter/Oracle-mum-on-11g-release-2-1.htm
Concerning
Rajesh -
Oracle 10G EXPRESS EDITION for windows7
Hi all
can you guys please give me the link to download oracle 10g express edition for windows7
I had already downloaded one for windows7, but when I go to install, I can't able to execute it, and that the file downloaded, said the PUBLISHER OF THIS PROGRAM could not BE VERIFIED.
SO CAN U PLZ GIVE ME LINK AS SOON AS POSSIBLE.
THANKS IN ADVACE.Hello
Have you checked the installation manual?
Windows 7 is not supported and you should go with a certified operating system.
Thank you
Hussein -
Oracle 10 express edition on windows server 2008
I installed oracle 10 (10.2.1015) on Windows server 2008
but unable to log on
getting error as
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
also the default browser not opening
Please help meSalvation;
I'm not sure 10 XE certified with win server 2008
Please see:
http://download.Oracle.com/docs/CD/B25329_01/doc/install.102/b25143/TOC.htm#CIHFEBGE
Operating system one of the following 32-bit Windows operating systems:Windows 2000 Service Pack 4 or later
Windows Server 2003
Windows XP Professional Service Pack 1 or later
"" I suggest, I suggest you close your thread here any change of State of thread to answered and move it to * Forum Home "database" Oracle Database 10 g Express Edition *.
Respect of
HELIOS -
Creating Partitions in Oracle 10G Express Edition
Can I create partitions in oracle 10 g express edition?See for yourself:
http://download.Oracle.com/docs/CD/B25329_01/doc/license.102/b25456/TOC.htm#BABJIJCJ
-
Oracle business rule editor/designer as a stand-alone web application
Hi all
I want to use the engine of trade rules Oracle on non_soa J2EE application with weblogic server.i found my solution in this doc http://docs.oracle.com/cd/E28271_01/user.1111/e10228/non_soa.htm#ASRUG828
But I want to have my business rule editor/designer as a stand-alone web application for the use of analysts to create the new rule, modify existing and... .without deployment main editing application and rules affected on app at runtime.
Can I do it?
Thank you.
Fazel.
Check the functionality of the SOA composer where you can manage the rules and make them deployable to the execution of composites and applications that use the rules. You may need to develop the first time within Jdev but you can edit and change them in SOA composer. You can find the composer SOA in your local installation to http://hostname:soaPort/soa/composer /
In addition, please refer to the documentation here: http://docs.oracle.com/cd/E23943_01/user.1111/e10228/rtdt.htm
-
Oracle 10G Express Edition on Linux
Hello
I am trying to install this edition on Linux Mandriva. However, I get the message which I believe is trying to install Oracle on the root disk. Is it possible to load the installation package on the drive of the party that has 19 GB free space?
Error message is,
[root@mandriva-vm downloads] # rpm - ivh oracle-xe - 10.2.0.1 - 1.0.i386.rpm
Preparing... ########################################### [100%]
install the package oracle-xe - 10.2.0.1 - 1.0.i386 needs 397 MB on the / file system
It comes to my records.
[root@mandriva-vm downloads] # df h
Size of filesystem used Avail use % mounted on
/ dev/sda1 G 4.1 3.9 G 9,5 M 100%.
/ dev/sda6 3.4 G 215 M 3.2 G 7% / Home
/ dev/sdb1 384M 19 G 20G 3% do youHello
I confirmed our Linux expert. It is not possible to change the path during the installation of package as its already defined in the RPM,.
So only solution for you is the increase in size of the root directory.
Concerning
Rajesh -
Problem when running Oracle XE (Express Edition)
My oracle Xe worked fine before 3,4 days but since yesterday that he did not. When I run "Go to database home page", the firefox me gives error that
"Unable to connect".
Firefox can't establish a connection to the server 127.0.0.1:8080. »
I also tried in IE but don't find any results.
Before yesterday, it worked fine.
Also then I connect via SQL command line, one entering the user name and password, the error message displays
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Kindly help me in this situationhttp://www.Bernie-Eng.com/blog/2009/02/17/restoring-oracles-initial-database-settings/
-
"the machine virtual source is not recognized" using VMWare Converter stand-alone 4.01
All,
Shadow protect IT edition allows us to create backups of image files from our servers. We need the ability to convert files Shadow protect (SPF) in VMWare Server 2.x. files about half of our servers do not convert. We get a message that says: "the machine virtual source is not recognized. What gives? I know image backups are fine because I tested.
Any help would be appreciated.
Thank you.
vmnoob
We support only a few specific versions of ShadowProtect.
> StorageCraft ShadowProtect 2.0, 2.5, 3.0, 3.1 and 3.2
There may be additional restrictions when you attempt to use these types of files, such as the following from the Manual:
1. dynamic disks are not supported.
2. all the images in the backup of a machine must be in a single folder, without other images placed there.
3. for incremental images, so 16 incremental backups are supported.
4. images of systems with logical drives are not supported if the logical drive is also a system or an active volume
5. for volume-based cloning, all volumes on the disk until the active devices and the system must be saved.
5.1 for example, if a drive has four partitions, 1 to 4, with the partition as the active volume 2 and partition 3 as long as the system volume, the backup must include 1 to 3 partitions. (ShadowProtect only).
Kind regards
EvilOne
VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
-
Installation and use of the stand-alone converter 5.5
vSphere 5.1, 5.1 VMware, Windows Server R2 64 bit VM 2012
I am new to VM and VMware. I didn't realize until today that if you allocate a certain amount of disk space for a virtual computer and later decide to reduce the allocation of disk space, you must convert "" the virtual machine to an amount reduced space during the conversion. I allocated 300 GB to a virtual machine and I want to now the award to 100 GB. The real Windows Server 2012 R2 64 bit partition size is currently 40 GB.
What I want to do is to install the Converter 5.5 on the same physical server (Windows Storage Server 2012 64 bit) where I currently have installed 5.1 vSphere. I would use 5.5 of converter to convert the virtual machine that has excessive disk space allocation of the physical server.
1. What are the options use during installation of 5.5 Converter (Converter Standalone Server?, Converter Standalone Agent?, Converter Standalone Client?, etc..)
2. are there any special advice and guidance for conversion into a VM with less disk space allocation?
Thanks in advance.
First I create a VM "empty"? I see are my existing VM, without the possibility to appoint a new virtual machine.
No, you don't need create a VM 'empty', just type the name for the new virtual machine and try to use a different name of the VMs on the right panel.
-
Install Oracle Application Express
I need to install Oracle application Express, I have install 12 c database and I got to know that the Oracle Application Express will default installed with Oracle Database 12 c. now, when I try to access it displays a white screen only, below is the address of the site...
http://localhost: 8080/apex/f? p = 4550:1:7221912349713
Concerning
Hi user1863983,
In case you want to use ADR in stand-alone mode, follow the link documentation of ADR to address:
Reference: running in stand-alone Mode
You must do the following:
- Navigate to the directory where ADR has been unpacked and run the following java command:
java-jar ords.war
- Set the location of the folder that contains the Oracle Application Express static resources when you are prompted.
If you have downloaded apex and who unpacked in a location then this parameter would be:
Pics If you install from the apex comes with 12 c database:
\apex\images - Set the HTTP port to the desired number viz.8081 when prompted
I hope this helps!
Kind regards
Kiran
-
conflict between 10g and 10g express edition
Hello guys... I got in my system oracle 10g Enterprise edition and then I installed oracle 10g express edition... and the problem is that if m trying to connect via the sys account then he gets login in the express edition of 10g and m not able to access my 10g database... Enterprise edition so
My question is how should I get login in my enterprise edition 10g using the sys... account so please help me out
Thanks in advanceHow do you try to connect from the command prompt? I do not use XE, but if you try the command prompt, what happens when you issue.
c:\set oracle_sid=
After that, try to make the connection and post your comments.
HTH
Aman... -
problem in the express edition of 11g istalling
I managed istaled oracle 11g express edition. When I pressed start database displays an error "windows cannot find 'http://127.0.0.1: % HTTPPORT%apex/f?p==4950'.» Make that you entered the name correctly and try again "". "
And there is no option of database homepage.plz goto me didn't help
Try to replace HTTPPORT % by value of the port, should be 8080.
The installer for this shortcut usually isn't quite get finished successfully. Also allows to check, in the output of "lsnrctl status" one of those that you have three different termination points, is for the 8080 http port. If you do not have all three, the web pages are not going to work.
Maybe you are looking for
-
QuickTime Pro 7 has been interrupted?
Hello I use my QuickTime 7 Pro license in the OS X El Capitan! Can I use it in macOS Sierra? The latest version is 7.6.6 I use in El Capitan? Will not be updated more or been discontinued? Thank you
-
FIRST HP: HP first Cas.Mode in the functions of the program
Hello community, I learn HP first language programming but I am not really associated with this, I would like to know the basic structure using the matrix and CASE work (both in programming mode). I have "he's really appreciate some examples with pro
-
Satellite P300-1gn starts up it free or by touching the Mute button
My satellite P300 1gn starts that it self.It starts also toutching the Mute button or button CD (they are part of the extra of the enlightened next buttons set the power button. Is it possible to disable these keys additional lluminated? I wonder tha
-
The nag screen to get update's coming two everyday when I click on "ask me later". This is not 'later' in my book, it's going to take longer than two words for my av provider update their plug-ins, I bet. OK, I know in the grand scheme of things, it
-
cpu high displaying the menu plugin content load
When I just opened the dialogue content plugins the CPU load increases significantly (about 70 percent). because of this, I find it difficult to make any changes. This happens every time. This has happened Each time Firefox opened == Sorry, I don't k