Oracle Smart View 11.1.2.5.400 prompt bug still not fixed?

Similar Questions

• Smart View shows no value, but a snippet of data not

  I loaded data and calc would be
  
  When I go to smart View-> Refresh
  
  I have no data
  
  I think the my additional complication is my server essbase is also on my laptop
  
  Please notify
  
  Published by: level following December 19, 2011 10:55

  Are you sure you have not navigate without data on?

• Smart View Add - In in Excel 2013 disappers

  Hello

  Smart View add-in disappears whenever I run a special on a range of new or existing and close the Excel file. When I re - open this file Excel same or new, Smart View missing once again, so I go to Option > Add-Ins > and this is under the Application Inactive Add-Ins. To activate it, I'm going to manage the COM add-ins and check the Oracle Smart View for office option. It works, but I have to do it EVERY time that I re - open the excel file.

  Any suggestions or ideas?

  Thank you

  quick, followed to my previous note, with a slight variation on the solution of JM, I've been able to resolve these two issues of users on a system of users that the key was not in HKEY_Local_Machine but in HKEY_CURRENT_USER.

  so, to quote with slight modification...

  Open regedit and locate the entry

  HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins\Hyperion.CommonAddin\

  and make sure that the LoadBehavior key is set to 3.

  My guess is that the difference was caused by the way in which it has been installed and the local user rights.

• Error when using Smart View install link in the workspace

  Hi all

  We recently definitely use Smart View 11.1.2.5 instead of 11.1.2.1.

  So role the file to our users, we must update the link in the workspace.  I did it, copy the new .exe and file version.xml to our server that hosts the workspace, in the path of file Oracle/Middleware/EPMSystem11R1/common/epmstatic/wspace/SmartView.  I then removed the old files.  Now when I connect to HFM and go to the link, after a period of a few minutes, I get the error "Cannot find a version of the runtime to run this application."

  I tried to restart all of the services, a dead-end.

  No one knows what to do to fix this error?

  Thank you in advance.

  Brian

  Reply to my own post.

  This is a known defect in Smart View 11.1.2.5.  HFM Workspace do not recognize as valid an installation link.

  Thank you.

• Smart View Shared connections - Oracle Essbase - how comes?

  Test the new version of Smart view 11.1.2.2.310 on Office Excel 2010.  In Shared connections I show three Essbase servers

  EssbaseCluster-1

  EssbaseCluster-2

  EssbaseCluster-3

  Through the Regional service, ago only EssbaseCluster-3.  This file or search is connections shared pointing to 1 and 2?  If I try to open them, they give an error "unable to connect to the Essbase server.

  How can I remove these?  Click on the option delete is not available...

  JTS

  It is usually being taken from the register of Shared Services, if you run a report of registry you have 3 groups?

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Problem starting Smart View

  Hello

  I have a problem with Smart View, which disappears into the launch of Office.

  Can you help me solve this problem?

  Thanks in advance

  I use Smart View 11.1.2.5.000

  and office 2013

  Have you read and tried the following Oracle support doc - Smartview tab disappears from Excel (Doc ID 1991963.1)

  See you soon

  John

• Smart View - Essbase: connection clear the data grid

  Hi all

  I use Oracle Hyperion Smart View 11.1.2.3.000 and Essbase 11.1.2.3.000.4415 in Excel 2010.

  My spreadsheet contains data that I need to load into Essbase, but when I try to connect, the data grid is disabled...

  I have a workaround: duplicate the sheet, connection, and then copy - paste the data in the sheet of "new".

  It's very frustrating, is someone can help me please?

  See you soon,.

  When you refresh this worksheet for the first time, connecting to Essbase, going to go ahead and automatically retrieve the data of the cube - it is a normal behavior.

  Your solution - make a copy of the grid, refreshment and copy in the back, is the best workaround.

  Thank you!

• Smart View removes non-members of the model after Ad - Hoc analysis

  Hi all

  I have a spreadsheet that I recovered using Smart View 11.1.1.3 against Essbase 11.1.1.3.

  When I update this spreadsheet against using Smart View 11.1.2.5.215 11.1.2.3.500 Essbase spreadsheet seems to be remove the cells whose content is not a member in the database.

  
  

  Rest of the worksheet correctly refreshes and I receive the correct data in the worksheet by using the last smart view, but I need to have the content which is withdrawn.

  
  

  Anyone has any idea what is causing this question to ask?

  
  

  
  

  Thank you

  This has been resolved by an Oracle Doc ID 1571254.1

• Unable to access the Smart View 11.1.2.5.216 in Outlook 2007

  All,

  I uninstalled Smart View 11.1.1.3.x of my MS Windows 7 (x 32) Professional SP1 machine and installed Smart View 11.1.2.5.216 during the same session (that is to say, without having to reboot).

  While SmartView arrives perfectly fine when I access Excel, Word and PowerPoint and I can connect to the 11.1.2.3.00 EMP data sources, I don't see the Ribbon of Smart View under MS Outlook. This is in spite of:

  -After changing my MS Office 2007 installation to run Visual Basic Scripting Support on my PC for MS Outlook 2007 only (i.e., via Control Panel > programs and features > MS Office Standard 2007 > change > add or remove components);

  -remove the key HKEY_CURRENT_USER\Software\Hyperion Solutions and that underlie the subkeys, after uninstalling 11.1.1.3 and before installing 11.1.2.5.216

  There is no disabled COM add-ins displayed in MS Outlook 2007 and there is no other entries related to Hyperion (IE, HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins\Hyperion.CommonAddin) to amend\delete under HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\AddIns. Also, I searched but could not find the Smart View PST file on my machine.

  Has anyone any suggestions as to where else I could be looking or what else I could do to activate the smart display in MS Outlook 2007?

  Thanks in advance.

  JBM

  Have you tried under option

  

  HTH

  Amarnath

  ORACLE | Essbase

• Remove the hierarchy without affecting only not in Smart View

  I was wondering if someone was faced with the same question.

  We have an online form with all P & L SG & A accounts used for the planning session and we don't want any kind of indentation, and I'd rather flat. So, we used "delete the hierarchy", and it works perfectly in the workspace. But when we opened that in Smart View, it always shows the indentation in the rows.

  Is this a bug / it's just normal behavior / is because of the difference in the version for planning and smart view

  Planning Version - 11.1.2.2.300

  Smart View - 11.1.2.5 version

  Concerning

  Amarnath

  ORACLE | Essbase

  This was noted as a Bug 11790086 code: REMOVE the OPTION of HIERARCHY DOES NOT SCREEN IN SMARTVIEW

  "If a form uses the hierarchy for a line option or a column, the hierarchical structure always displays when the form is opened in SmartView.  The hierarchy option works correctly when the form is opened from the web of planning. »

  HTH-
  Jasmine

• error Smart view 11.1.2.3 in Excel after installing

  I have Microsoft Office 2007 and install smart view Hyperion Workspace 11.1.2.3 bit, but got an unidentified sells opened Excel.

  Kindly help.

  Please follow the steps below

  1. from Control Panel for any installed smatview, if so please uninstall the same

  2. take the backup of the Windows registry.

  3 remove the entries of HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\options

  4. download the latest version of smartview from the link below.

  http://www.Oracle.com/technetwork/middleware/smart-view-for-Office/Overview/index.html

  Also just to update before asking a question in the forum, please do a search there are many requests even posted earlier.

  Thank you
  ~ KKT ~.

• Connectin OBIEE Smart View 11.7

  Dear all,

  I am a beginner in Smart View.

  I have installed OBIEE 11.7 and I minimum Smartview 11.7 on homepage.

  Then I installed the same. Now, I need to connect to OBIEE since the MS Excel 2007 Smart View Tab.

  I'm clicking on Panel, Provate connection, create the new connection, and then I'm trying to enter the URL 'http://IP_ADRESS:PORT/Analytics/jbips'., its application to BOF user, password. When I tried to connect its says "error log".

  Please help me. I'm missing something.

  Kind regards

  Fayet

  Thank you Srini,

  Correct years was DOC ID:

  OBIEE 11 g 11.1.1.7.x: how to integrate with Microsoft Office OBIEE using Oracle Hyperion Smart View for Office (Doc, ID 1576336.1)

  https://blogs.Oracle.com/proactivesupportEPM/entry/smartview_office_assist

  Kind regards

  Bachelot

• Migration to Smart View Code

  Hi all

  Are there compatible functions in Smart View API to replace the below given functions add-in Essbase for the parameters provided, I tried to find the same Oracle doc without success

  HypSetSheetOption (Null, False, 15)

  HypSetSheetOption (Null, 16, False)

  EssVSetSheetOption (Null, 13, True)

  Thank you

  Rachid

  Not a big deal r.  I don't have them memorized.

  16 HypSetSheetOption t - it, isn't? Table 5

  You select alias 'On' with this Add-In function.  However, if you want to 'Description Only' (value 2) or 'names and Description' (value 1) in Smart View depends on whether you also use option 24 ('turn on the member name and Alias setting') in the add-in code, I think.

  In short, Smart View HypSetSheetOption 16 option replaces the combination of options of the Add-In EssVSetSheetOption 13 and 24.

  I'm looking to the last documentation available for the two-SV 11.1.2.3 and Add-In 11.1.2.2.

• Smart View recovery error

  Hello all, retrieving smartview, I get the following error.

  "Request Timed Out. "Contact your customer smartview system administrator to extend your Windows Internet Explorer time-out settings (receive Timeout, KeepAlive Timeout and ServerInfo Timeout).

  Please can anyone suggest where the parameters need to be changed. FYI, we are at Version 11.1.2.3 of smartview.

  Thank you

  Ted.

  Try Oracle Support - Smart View error: "the application has expired. Contact your administrator to increase netRetrycount and netRetryInterval"(Doc ID 744559.1)

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• ERPi landing page is empty when drilling of HFM/Smart View

  All,

  We implement ERPi 11.1.2.2.3 and have successfully used to load data from a source Oracle GL system in to a HFM 11.1.2.2.3 target system.  We have tested and experienced that pierce the works of Oracle GL of the loading of data established by clicking on the hyperlink source amount.  However, when we try to break through to the ERPi landing page of a grid of data HFM, shape or Smart View using the drill by the ERP Integrator option, the landing page says "No Data to display" in Pierce through summary and drill through the details of the form.

  We missed one configuration step in ERPi?

  Thank you in advance for your help!

  Mariko

  It turns out that this problem was caused by two things:

  1) ensure that your security is set on activate via drill with ERPi

  (2) the drill by POV is case-sensitive - if you use a grid of Smart ad hoc View, you must assign your POV exactly the name of the Member (I tend to type in lower case all the when you use an ad hoc network, when in reality, the members are a mix of upper and lower case)

  Who said: I noticed that in HFM 11.1.2.2.3 the POV selection in grids of data (and also process control) affects your selection to lowercase for the scenario, vision, value and many of our custom dimensions.  I don't know if it's a bug or a configuration problem (the POV has case-sensitive appropriate forms of data), however, you can avoid drill - through data grids.

  Thank you

  Mariko