Orb is blocked at the start of the system on my Vista Ultimate SP2.
Original title: Orb
Hello
Orb is blocked at the start of the system on my Vista Ultimate SP2, even if the box is checked in the setup of the system. What could be the reason? And there at - it a danger by unlocking it? If this is not the case, how can I put it so that it hangs every time you start?
Thank you
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Let us know what happens in safe mode.
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
Tags: Windows
Similar Questions
-
I am currently on my laptop. I have my Windows Vista Home Premium desktop connected with a wire to the internet, and there is currently no link. I can't even connect wirelessly, and yet my laptop is fine with both. It was not identified until I restored the a few days before, and now he has no connection whatsoever. Type of emergency because my business is at a standstill right now because of this. Edit: Where you plug your cable internet on your computer, it normally has a flashing beside him, but it currently isn't. I can plug the wire into my laptop and it works fine, but not with the office. So I know this isn't a problem of modem/router, it's a computer problem.
Hello
Please follow the steps mentioned below and get back to us with the results.
Method 1: Wi - Fi and in Windows network connection issues.
See also: Internet to solve connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
In the case where the flash light does not appear, this could be a problem with the wire or the port network, so you can consider contacting the ISP (Internet Service Provider) to get help.
I hope that helps!
-
With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system, forever, until closing by force. What can I do?
It is very difficult to manage my files.I suggest you download Process Explorer. This freeware utility performs a similar function to the Windows Task Manager, but it goes much further.
For more information about Process Explorer, see here:
http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx
Explorer.exe is used by a number of applications. The posting process and see which element below uses explorer.exe.
-
Upgrade to 8.1 Windows blocked by the system administrator?
I'm trying to update to 10 Windows in Windows 8. Understand that first I need to update Windows 8.1.When I click on upgrade of Windows box 8.1 in the store, it comes with the message that it has been blocked by the system administrator. I am the only admin on our system at home. What can I do?
Hello
You can download and/or create 8.1 Win media from this link...
http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media
If you use an ISO, DVD, or Flash Drive, simply to run to Win 8 breast...
-
I have reset my laptop and I don't have the set up cd, I have the license key for vista ultimate can I download
Hello
"I reset my laptop."
What do you mean by that?
There are several methods to reinstall Vista.
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.
Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.
If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
I have two Acer Aspire laptops. They are totally frozen because of the virus.
I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement.
I have to rebuild my laptop.Hello
No - what are the two Acers come with a recovery disk?
If this is not the case, one of them would have a recovery partion, which specifically is to reinstall the operating system on it.
With an Acer, you press Alt + F10 at startup to start the recovery process.
All data are lost when you do the above.
And for the lost disc, contact Acer and ask them to send you recovery disks.
They do that for a small fee:
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Failed to open all files with the extension .exe in Vista Business SP2. Dialog box appears and asks which program to use. Seems to have lost the info file assoc after virus removal. Any suggestions?
Hello
Try the methods provided below and check if the problem persists.
Method 1:
Try the fix it or follow the manual for troubleshooting to solve the problem.
When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
http://support.Microsoft.com/kb/950505
Note:
The link above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756
Method 2:
Download and run Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
-
I am running vista ultimate SP2 32 bit. I'm unable to complete the installation. Support for koadak says that I need to update my windows install. When I go on the site microst, I don't know that one to download. I am running vista ultimate SP2 32 bit. I'm unable to complete the installation. Support for kodak says that I need to update my windows install. Help!
Update your OS via windows update (start > Control Panel > Security > windows update).
-
I tried to do a system restore on my laptop using the included recovery disks and had this error 0x400110020000100B. The drive looked pretty beaten last week so I ordered a new series. Now, when I got to put disc 2 in (to 80% full) I get the same error. I called customer service and he took me through the process of F9, nothing works and I also tried the F11 approach that made me not the case. I'm frustrated because I don't really have the money for a new laptop computer.
Laptop is a HP Pavilion DV6700.
Any help would appreciated more than you know.
The system is Windows Vista 32 bit
The guy on the phone said ' well, you know it's a pretty old computer... Thank you gee...
Hello:
See if you can make your own Vista installation disc if you can read the product key 25 character on the bottom of your laptop.
Here's how:
If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.
You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.
Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."
The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.
The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.
When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.
I selected no, make the ISO file.
It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.
I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.
When you enter the product key, he knows which version of Vista you have.
After you install Vista successfully, you can then install the drivers for your PC and driver page support.
Paul
-
How can I keep the "on-screen keyboard" to invite the user every time that I reboot? The system is Windows Vista.
Please explain what you mean... "incentive"?
The keyboard screen is not supposed to be enabled when the computer is turned on.
Here's how to turn off on-screen keyboard:
http://www.Vistax64.com/tutorials/72733-screen-keyboard.html
-
Blocking of the system during the seizure.
I have recently reinstalled windows and it worked find for a few days. Then it automatically loaded 170 updates. Since then every time I type in any program quite frequently the disapperars slider and the system hangs. I have to click the mouse to cursor to reappear and be able to type. the reason why I have re installed windows was because of this error and because programs are not open when the computer woke up from his sleep.
I have updated the drives for my chipset, but it made no difference. I use a desktop computer with windows 7 installed.
Hello
1. do you get an error message/code?2. What is the brand and model of the keyboard?3. the problem occurs with different keyboard?This problem can occur because of a third-party program or application in conflict with the work of the keyboard.Method 1:Try to run the troubleshooter of performance and check if it helps.
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterMethod 2:Step 1:I suggest you to check if the problem persists in safe mode.Reference:Start your computer in safe modeStep 2:If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135
Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"
under more information to prepare the computer to start as usual after a repair.Method 3:Check out the link and follow the steps in the article:Crashes Windows or freezesNote: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.Also check this link for more information:Optimize Windows 7 for better performanceNote: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.If the problem persists, you can write to us and we will be happy to help you further. -
Ideas:
- You have problems with Starry night pro 6.3 of programs
- Error messages that Starry Night Pro has stopped working Windows will close the progrsm
- Recent changes to your computer that is upgraded from Vista Ultimate to Windows 7 Ultimate
- What you have already tried to solve the problem running in compatibility mode
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Follow the steps below to run the pro6.3 starry night in Vista SP2 compatibility mode:
http://www.SevenForums.com/tutorials/316-compatibility-mode.html -
Good question after the fresh install of Vista Ultimate
I just be reformatted my laptop Vista ultimate.
But now, I found that I lost half of my volume, and when I put my external speakers to stop the song in the media player and I have to start the song so she can play through the speakers.
If I remove the speaker from taking while playing music no sound comes out of the computer as it should do.
Help, please.
Hello
Have you tried to update a sound driver or upgrade Windows by default?
http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
-
Satellite P300 - 18 M; The clean installation of Vista Ultimate failed
Hello everyone,
I recently bought a Toshiba Satellite P300 - 18M. Now, I want to install Vista Ultimate on a totally clean system. The installation runs, but at the final stage (end), which takes about 2 hours, the screen becomes black with just the mouse showing pointer. I sometimes triep to leave from one day to the next day, she who does not help.
Anyone who has ever heard of this problem and knows how to solve? If all goes well...Greetings.
Never heard of this issue, but it would be interesting to know if you can restore the laptop using the recovery disk Toshiba of origin.
It work?By the way; Did you include the SATA drivers before starting the installation of Vista?
-
Another forum for desktop icons frozen suggests will restore program, but I'm having trouble
by following the instructions given. Any detailed instructions and suggestions - or any other solutions would be much
appreciated!
You are welcome; Sorry, it didn't fix it.
It seems that by what you tell us it works OK in Mode safe as the system restore worked.
Function icons open programs and run in a reasonable manner in Mode safe?
Try this:
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Here is information on improving the performance of MS, but it was not intended to fix the frozen icons!
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
There are many things that could cause this type of problem.
They may have installed more then an Antivirus, which is a no-no.
If the worst happens, instead of scrapping, back up the data and reinstall Vista from the DVD or from the recovery partition.
See you soon.
Maybe you are looking for
-
Toshiba 40SL980G - the Youtube app after the firmware update.
Hello So today, I've updated the firmware of my TV (40SL980G) and after the update of the youtube app is missing and also the social place of Toshiba places is not accessible. I did reset TV after the update.I checked the firmware download page, but
-
New installation of Vista on Satellite A100
Hello I just want to know how to install a clean OS (Vista) on my laptop. Can I use the disk at any time to upgrade?What problems are possible? ConcerningRambo
-
AVI video files play sound but no video in Windows Media Player 7
My video files avi play sound but no video in Windows Media Player 7. Video files avi are since 2002 and has played very well until I'm a new PC with Windows 7 so I know that the files are not corrupt. All my other files and videos play fine in Media
-
uninstall a program that allows to uninstall
When I try t o uninstall AiO Kodak I get: the component that you are trying to use is on a cd-rom or another removable disk that is not available. I have the original disc, but do not know how to use it to uninstall the program.
-
Why not update Node.js? There is a serious security risk
It has been weeks you na not refresh Node.js frame inside your application, which is free, open source runtime. You are waiting for a media sensationnalistes article/news to take action?[link removed by Moderator]