order a "pulsed" LED

Similar Questions

• LED Ring vs Squared LED for wedding photos

  I'm stuck between order these two LED lights for interior shots in low light. I have a 50 mm F/2.8 fixed but still don't think it's enough. I saw these two types of lamps, but was informed by a photography store local circular lights are more for portraits upclose and recommended the square LED. I'm going to walk around taking pictures.

  Any suggestions?

  Using Canon 3ti

  50mm and 15-55mm lens

  Thank you

  Get an external flash instead.

  Your T3i may act as a master flash, so you can even get the external flash off camera for even better results.

  Canon has recently updated their flash 430EX, so 430EX II sells for what I consider a good price.

• T410 + battery Slice - sleep problem

  Dear community,

  I have a Thinkpad T410 with the following specifications:

  Intel Core i7 620 m

  4 GB of RAM

  NVIDIA nv3100m

  Windows 7 Professional x 64

  I have problems if I go to fashion 'sleep'. If I press mode 'sleep', the t410 go to sleep less than 1 second pulse led on the power button, and the sign of the moon on the back of the LCD turns off. Next time if I turn on the T410, Windows asks me if I will start normally or in safe mode. So this means that the battery or the T410 certainly interrupts the current, and they seem to have no power. But it doesn't happen every time. For example, I give the following:

  Main battery: battery 100%: 100%: "sleep" mode works perfectly

  Main battery: battery 100%: 50%: "sleep" mode works perfectly

  Main battery: battery 100%: 0%: "sleep" mode works perfectly

  Main battery: battery Slice 75%: 0%: "sleep" mode works perfectly

  Main battery: between 60 downto 0% battery range: 100%: standby mode does not work.

  I did this for the moment a long time. I can't give a percentage by exactly, when the sleep mode does not work, but if the slice to 0% and the main battery approximately between 60% downto > 0%.

  I updated my BIOS and also the energy Manager. But there is the problem more far.

  Anyone have the same problem and have a solution for this? I think that behave in the system/T410 isn't normal right?

  Thanks in advance for your help. I look forward to your answers...

  Best regards

  Dear community,

  I know that the subject is almost a year, but I have a solution for the problem mentioned above.

  If you install the "Intel AMT 6.2 management engine Firmware" problem is gone.

  I am very pleased to find this solution. Now I can to each battery charge percentage goes into sleep, even with the battery installed slice mode.

  Best regards

• How to put a meter index events who has access?

  Hi all

  Noob here again. I guess I'm missing something here, but I can't seem to find what I need to do.

  I have an external/master while loop for my vi. I have a case of event inside.

  I have a couple of clusters, a left... and a good.  Each has a series of 7 LED Boolean controls. And 7 digital controls.

  I've set an event for every change in the value of the Boolean LED.

  I am eager to follow the order that each LED is selected and set the value of the digital correspondents to this index.  This will show the user on the GUI, the number of each has been selected.

  I'll run through these more late to know the order they were selected (R2, R1, L1, L4, L5... etc), thinking when it's time for the event to spit this return info, I'll create a text with R2, L1, R1, L4, L5, etc to see what signals will send time.

  I've seen examples of using a shift register in a loop for something like that, but I don't want to be in response to random user... they can click on part and the other in an order, and I need to enter it.

  I can't find any numeric variable type, I can put in the block diagram to act as a meter index... all I see are constant.

  Any suggestions?

  Thanks in advance,

  Cayenne

  I thought you said you understood examples of shift register.

  The wire is the variable.  If you want to increment the value in a thread you put a function + 1 on it.  Her son in the shift register on the right hand side the shift register left side gives the new value in the next iteration of the loop.

  I recommend you watch the LabVIEW tutorials online
  LabVIEW Introduction course - 3 hours
  LabVIEW Introduction course - 6 hours

• Smartband Feature request

  Hello

  3 months using the smartband with my Z2 phone, I miss some important features:

  1. Auto silent mode: usually, I have my phone in silent mode, because the vibrations smartband are sufficient for calls and notifications. The problem is when I leave my phone away and disconects from smartband. If I get calls or notification, when smartband is off limits miss me them because the phone is in silent mode. An automatic silent mode when smartband is connected will be a great feature. I tried with Smart connect app, but smartband is not available for creating a new event when is connected/disconnected.
  2. Auto Unlock. Smartband NFC could be used as a key to unlock the phone instead of manually password/unlock model. Very useful when you have unlock password required by a working profile e-mail account.
  3. Display time with leds/vibrations. A way to know the time directly from smartband if you do not close clock/phone. For example, with the number of led flashes. First led to show the hours and the second and third leds to show the minutes (second ducts for decades and third unit). 18:25 times, in order first testament led flashes 6 times, second led flashes 2 times then and third led will Flash 5 times.
  4. Manually the sport mode. Specify on lifelog manually what sport you start/stop and let the smartband collect accurate information on the sport (tennis, squash, mountain BIKING, swimming, etc...)

  Thank you very much. I hope that smartband will not be abandoned in the near future product

  BR,

  Jambo.

  You must send to Sony developers because it is a user forum in support http://developer.sonymobile.com/about/how-do-i-get-in-contact/

• Download link in the order page led to "You have no download" in the download page

  I have the PhotoShop and first element 11 ten days before the release of version 12. I applied for the free update, and this upgrade on order page order 10/1. The download link on the page of order, however, leads to the page "Your downloads" with "you have now downloads! I opened case and has asked for help. 10/8, I was told that the case has been sent to "Senior Team"! When I heard no response and asked him again 10/14, I was told basically 6/10 I have to just wait and not ask questions. He is now 10/25 and I'm still waiting. What I really want to know, is how much time is the 'Senior' team is backlong wait time and it's really big a problem?

  Hi PawPawCat,

  Please give me the number of cases. and I'll look into it.

  Otherwise you can try to download 11 elements of direct download links available at: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l

  But make sure you follow the steps mentioned on the page before you start the download.

• How to order screen for Toshiba Satellite M50-A-110

  Display on my M50A110 has been broken, and I want to order a new. How can I order this part?

  All the info I have on it are specs on toshiba.com and I'm not sure if that's enough (screen size: 39.6 cm (15.6-inch) type: screen Toshiba TruBrite® HD TFT high brightness with 16: 9 aspect ratio and LED backlighting internal resolution: 1366 x 768)

  Given that I can't find option change anywhere, what I really wanted to ask is what is the part number display on the order of display for Toshiba Satellite M50-A-110? I don't have tools with me to disassemble, and I want to order the part as soon as possible. Sorry for the spam of this thread.

• Apple Watch continues to pulse messureing

  My Apple Watch stops the messuring pulse about 3 Minutes after the beginning of a workout.

  in Helthapp, I see a messure pulse after the start up to 3 Minutes, then it stops frequently.

  The next point of messure of pulse is if I stop the workout, it'll be 1 or 2 hours later.

  Any idea?

  Hi Michael

  On your iPhone, in the application of the watch, go to: Watch My > Workout - if it is currently enabled, disable power saving Mode.

  Otherwise, the following steps may help:

  • Close all open applications on your iPhone to them and then restart your iPhone and your watch:
    • To close open applications on your iPhone: click twice on the Home button, and then drag upward on each preview of the app.
    • Both devices turn off together, and then restart your iPhone first:
      • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.
      • To reactivate: press and hold the side button until you see the Apple logo.
  • If this does not help, try next disconnect and rematching of your watch:
    • The app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.
    • Choose to restore your watch (backup restore) when provided the opportunity during the whole. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support

  If the problem persists, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:

  https://www.Apple.com/support/watch/contact/

• Satellite A350-212 on the fence the leds on my laptop

  Hello

  There are seven symbols that are related to windows media player on my laptop near the power button... I could close with touch first conducted before, but recently it does not work, I could not close all of the led or rather the power button close to ligtings on my laptop... I know that I don't have a big problem with my laptop but it is important to me, if you could help me with this, I'd be happy...

  Hello

  The first button turns on and off lighting
  I think you have some problems with the installed VAP (value added package).
  This is why I would recommend reinstall this package again
  Firstly uninstall the VAP system.
  Then restart the device and download the Toshiba VFR pilot European page.
  Then install again, reset the laptop.

  In order to get the FN button to work, you need to install the Flash memory card Support utility.
  If you use Windows 7, then you can download this tool updated Sat L500.

  Welcome them

• LED power button problem FIXED on Satellite P300

  Toshiba
  LED power button fix

  Toshiba
  Satellite P300-h-13

  By Thom
  Wijtenburg

  First of all, I would like to
  say you that I came up with this correction, after a clean reinstall of the
  Vista. (I used the serial number of windows on the bottom of my laptop for)
  install, so it's the same license as the OEM of windows and therefore
  Tout_a_fait legal.) After the clean install and installation of all the
  the drivers listed on the site of toshiba LED power button (also
  known as the mute button) and the CDDVD butten (mediaplayer button)
  stopped working. After browsing around forums toshiba I found
  this case, I removed the support button utility that the mute button has acted as
  a mute button. Also the mediaplayer button worked fine. Reinstalled
  the utility support for the button and they have stopped working. After many
  toshiba calls (I think about 5-6 in one day) they opened a
  support ticket for me, because they (team support callcenter)
  could not find a solution. Following their advice, I did the
  next to try to make it work:

  * Don't have a system restore with the restore DVD.
  * Do you have an another clean install.
  * Install the drivers in various ways (alphabetically reversed by alphabetical order and order of collection DVD).
  * update my BIOS.
  * downloaded a 'new' version of value added package (which was the same thing I already had).
  * installed the VAP with and without technical support button utility, no changes.
  After doing everything
  This, they said that they did not know the cause of my problem (at the beginning
  they thought it was hardware related). They came with a possible
  anwer:

  "It is."
  possible that we removed some features of windows vista
  operating system so that our one utility for device drivers
  work. In addition, we do support the configuration, that we delivered
  When you bought the laptop. »

  Now of course, I have
  understand that. I waited allmost a week, no response. Neither
  by electronic mail, or by phone, so I decided to google more
  on the problem.

  After a certain
  some research on Toshiba forum and Googling I came across
  a thread that sayd I must first install the utility 'control '.
  and the button press. Unfortunately what it did not work.

  Then, all of a sudden
  Windows displays a message saying that I should install the TOSHIBA.
  "ACPI-based value-added general use and logical device driver.
  I clicked on the provided download link, and the VFR package was a newer version
  version of the support page for my laptop which is held. So I downloaded
  This PPV version 1.17 and installed it. After a reboot, the buttons
  still did not work. But at least I got the file HWSetup.exe, where I
  could turn the LED off. Look into the button holder utility, I have
  saw that there where buttons like "Toshiba Assist" which my
  the laptop model is not.

  Navigation
  through the toshiba forum I found a file named ButtonSettings.ini, in
  which I can manually configure special keys. After a google
  search on the name of the file, I found that all the buttons list
  in a registry key. I saw the "Dimmer" file using the button
  folder and clicked on it. Poof... lights went out. Click again,
  Poof... lights turn it back on. So I replaced the wrong button definitions
  with CDDVD and dimmer values. Saved my changes but is not a restart.
  Opens the support button utility and change the path of
  MediaPlayer (who was always there to a previous definition) to
  Dimmer.exe. checked to see if the button CDDVD pointed
  MediaPlayer and restarted. When everything has been started, I pushed on the
  button again and presto... MUTE lights off. Pushed again, poof...
  lights. Pressed the mediaplayer button and started to mediaplyer. I have
  has been very happy when everything worked.
  Now that you
  know the story, here's the fix.

  * Difficulty: *.
  * Download and install the new VAP from here: [http://cdgenp01.csd.toshiba.com/content/support/downloads/util_tvap_26084A.exe]
  * Choose Edit in the installation and make sure that everything is checked
  * do NOT restart after the installation.
  * Download the ini fix and the fixed registry
  * Uncompress its contents into your working folder.
  * Copy the ini into C:\Program Files\TOSHIBA\TBS (where C: is the drive of program files)
  * In this same folder, start the exe called TBSbtnSt.exe
  * do NOT restart, click on 'no' in the dialog box.
  * Double click on the registry key, and then click 'Yes' to add to the registry
  * Then open the button support utility by clicking Start-> Toshiba-> utilities-> Toshiba assist. Help go to optimilization and click support button tohiba
  * If the path or the description is disabled, fix, and then click Save. See also if the CD/DVD mediaplayer points.
  * Restart you computer now.
  * If everything is is well past your special buttons should work.

  * WARNING: *.

  It worked for
  me, with my Toshiba Satellite P300-h-13, edition windows Home premium 32-bit.
  It should work on any model of 6 buttons with the mediaplayer and the mute
  buttons. I am in no way responsible for any damage that may arise
  If the fix does not work correctly. There is absolutely no. GARUENTEE
  It will work for you. If the answer is Yes, he does, and if it's not it
  doesn't work.

  * Author: *.

  I came
  With this fix by myself, without any help from toshiba support. I am
  the original author of this text. This document is for information
  purposes and should not be modified in any way.

  This page is
  also hosted on my Web site for documentation purposes. I have
  contacted toshiba support on my support ticket and has asked to
  Cancel and read this. I have also explained in the world.

  Wow, that's really cool! I think that a lot of users here would appreciate this extraordinary well documented fix.

  Thanks dude. :)

  Welcome them

• Satellite L40 - 15G - does not start, only power LED lights

  Hello.

  I have a Satellite L40 - 15G that will not start. I click the power button, or with the battery, and only the power led alternately. I can open and close the cd/dvd, but nothing else works. No beeps when I remove the memory, the hard drive led blinks even. I tried with another hard drive, and it's the same thing.

  Could this be the motherboard, the processor?

  Appreciate the help!

  Hello

  Unfortunately, it looks like a hardware malfunction. I guess that it s related to the motherboard or perhaps CPU, if you have already tried another memory module.

  You should go to an authorized service provider. Guys have good diagnostic tools to check your laptop and repair. In addition, they can order spare parts Toshiba.

  Sorry, but everything that s what I can say. Here he only a user to s forum

• Satellite U400-12F: LED power button & HDD protector tool does not work

  Hello

  I have a Satellite U400-12F and I bought a Vista Ultimate.
  After you have installed all the drivers and Toshiba of the corect order downloads, the button to turn on the power lights does not work.

  And I tried to install HDD protection Utility but the installer returned an error like 'cannot be installed on this model.
  Do you know why these problems?

  Thank you very much
  concerning
  Daniel

  > After installing all the drivers and software of Toshiba by order, the button to turn on the power switch lights does not work.
  Please check the BIOS settings. As I m not wrong not it takes an option called LED illumination or something like that. There you can turn on and off.
  Also, try to customize the special button of TOSHIBA using the Toshiba control utility.
  There are also some useful options.
  But to be honest I n not know exactly if this button doesn't work with Win XP. Maybe this feature is not available in XP.

  > I tried to install HDD protection Utility but the installer returned an error like 'cannot be installed on this model.
  This error message appears if you try to install a tool that was not designed for this series of laptop.
  The U400-12F seems to belong to the PSU40E. Check if it s a good tool.

• Flashing orange LED on Qosmio F20

  To cut a long story short, my Qosmio is no longer in effect.

  It has 5 LED lights on the front. I need to know what message they give some in order to identify the problem.

  Five to the left led flashes orange (irregular) and refuse it to power Qosmio. The flashing light does not occur when the Qosmio is not connected to the electric network.

  Basically, I need to know what know me.

  Thank you.

  Hello

  Of course, there is a power electronic and portable problem sends the hexadecimal code. To know what this code means that you know exactly how to read this code.

  Unfortunately I didn't find any public documents about it. In any case, I believe that without service there is not much to do. Or maybe you try fix it yourself?

• Pavilion 22cwa: HP Pavilion 21.5 inch IPS LED HDMI VGA Monitor

  Hello

  I have recently bought HP monitor connected to my laptop and installed the driver.

  My only problem is the annoying icon on the upper right of my screen. It seems that it is a characteristic of the pilot. it disappears when I step outside, but whenever I start my computer it comes back on. (closing is basically software closure of the driver, so he starts each time I restart my computer)

  is there a way to disable this feature?

  

  Hi @CrazyCoder,

  Welcome to the HP Forum! Is a great place to find answers and advice! You have the best experience on the HP forum, I would like to draw your attention to the Guide of the HP Forums. First time here? Learn how to publish and more.

  I understand that you have recently purchased the HP Pavilion monitor and it works well except that you have an icon in the top left that you find boring. This icon is most likely for the my display software. Here is a link to the Guide to the user IPS LED backlit monitors for you to review. You can

  My Display software allows to choose preferences for optimal viewing. You can choose the settings for games, movies, photo editing or just work on documents and spreadsheets. You can also easily adjust settings such as brightness, color and contrast with my display software. You can uninstall the software, if you choose to not use it. If not, you should check the settings in order to determine if there is an option to hide the icon. Please let me know how it goes.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. "In addition, by clicking on the" ""Twww.Mountainview.rsb.qc.ca Up ' below is a great way to say thank you!

• the power led stops working...

  in my macbook pro (early 2011) during the update of the el capitan 10.11.2 to 10.11.3 power led to go to Flash mode & stops working after update.can help me! ?

  The usual remedy is to reset the SMC. Read all the steps.

  Before resetting the SMC

  Try each of the following steps in this order before reset you the SMC. Test the issue after execution of each troubleshooting step to determine if the problem persists.

  1. Press Command + Option + escape to force quit all applications that are unresponsive.
  2. Put your Mac to sleep choosing the Apple () menu in the menu bar at the top left and then choosing sleep. After that he went to sleep, to wake up the computer.
  3. Restart your Mac by choosing the Apple () menu in the upper-left menu bar, then selecting restart.
  4. Stop your Mac by choosing the Apple () menu in the bar menu at top left and then choosing stop.

  Resetting the SMC on laptops with a battery you should not remove on your own

  1. Shut down the computer.
  2. Plug the MagSafe power adapter to a power source, connecting to the Mac if it is not already connected.
  3. On the built-in keyboard, press Command-Option-shift keys (left side) and the power at the same time button. Power adapter light can cycler deactivation / activation once.
  4. Release all the keys and the power button at the same time.
  5. Press the power button to turn on the computer.