Order binding OpenVPN TAP number

I am running a 64-bit Windows 7/8 environment AD using OpenVPN on remote computers to access our network/servers to our main office.

In general, once install us OpenVPN on a new machine and configure the binding (setting in network connections) order so this OpenVPN TAP adapter is at the top of the binding on a machine order everything is fine. The question that I have is some how the binding change periodically. I do not know what causes the effect to change, but it is causing quite a few problems with my machines, one being that it is no longer in communication with my WSUS server.

If I manually change the binding order so that the TAP water is at the top, all so well again.

My question is how can I statically set the binding order so that the OpenVPN TAP adapter is always at the top of the binding order. I tried to play with the 'metric of the interface' but that does not seem to have any effect on the binding order.
Any help would be greatly appreciated.

Rich

This issue is beyond the scope of this site and must be placed on Technet or MSDN

http://social.technet.Microsoft.com/forums/en-us/home

http://social.msdn.Microsoft.com/forums/en-us/home

Tags: Windows

Similar Questions

I just bought Adobe Acrobat Pro DC for my Mac ($449) and I received an order confirmation and serial number. I had been using a 30 free trial version. I don't have a confirmation e-mail. When is that coming? Do I have to download Acrobat, or does Adob

I just bought Adobe Acrobat Pro DC for my Mac ($449) and I received an order confirmation and serial number. I had been using a 30 free trial version. I don't have a confirmation e-mail. When is that coming? What should I download Acrobat or Adobe allows only the software I have?

within 1 business day pst.

You can view your account, too: Adobe ID

Just ordered and downloaded LR3 - number series number

I bought the Mac/English version, but when I went to download, the only choices I had were Mac or Windows languages.
When I look at the history of purchase or to the download history, it has no serial number.
Now what?
The upgrade from Lightroom 2

Maybe just run the test until you get your serial number? (Its the same software and fully functional - it just expires after a while if you don't give him a valid SN.)

Windows XP, keyboard tape number in place of letters__

My three year old was playing with my laptop. I try to type letters and is randomly put in numbers. I can't find help on this laptop because I can not type words! Help, please.

Disable digital mode by pressing the NumLock or NumLock key.

Exceeded series number order entry recovery disk

Order the recovery for Pavilion dv7-1245dx disc. I am in the USA so checked that. Entered the serial number on the purchase order. Returned incorrect number. I tried new and same error. Tried the letter instead of zero/zero - same error. Then, as the number started with NDT I guessed that it might be a Canadian product. Canada to check on the page previous and re-entered serial number. This time, he said I had overcome attempts allowed to enter a serial number. The link for the support was a mistake 404 impasse. Any suggestions?

Thank you

Hello

Make sure you have the correct serial number. by checking the entry in the bios. To do this, shut down the laptop. Tap away at f10, you press the power button to enter the Menu of the Bios - on the first page, you should see several details related to your laptop as the model n ° No. and also your serial number.

If you still have problems with the link (I usually do), try calling HP directly - relevant phone number can be found on the links below.

If you live in the United States, contact HP here.

If you are in another part of the world, begin here.

Kind regards

DP - K

Search B2B cases based on the id number or invoice order or...?
Hello
I want to search a particular instance in B2B reports based on the order Id or invoice number or number of payload.

Y at - it an option for this in Oracle B2B?

Or is it possible to set one of these identifiers as the Application Message Id?

Help, please.
The best way is to use XPath in the Document definition. You can set three of XPath in XPath document definition tab and to run B2B will assess the value of these XPath and who will store in DB. Then you can query DB or B2B reports based on these values.

You can view-

http://docs.Oracle.com/CD/E23943_01/user.1111/e10229/b2b_documents.htm#CHDDBEHB

Kind regards
Anuj

Return orders with three elements unique order number

Dear all

I want to return orders containing elements of each of the three elements (for example, 345, 7654, 876) in each order, if not.

Order of the tables:

order_no number (6).
item_no number (7).
ORDER_DATE date

Select * command
the point where (en) have at least three as shown above in a single order

Please guide me how

Kind regards... Soilihi

It is always useful to post examples of data as well as the results expected if we do not have to guess. I created my own sample data, so this may or may not work for you:

SELECT  ORDER_NO
,       ORDER_DATE
FROM    ORDERS
WHERE   ITEM_NO IN (345,7654,876)
GROUP BY ORDER_NO
,       ORDER_DATE
HAVING COUNT(DISTINCT ITEM_NO) = 3;

Test

SQL> CREATE TABLE ORDERS
  2  (
  3          ORDER_NO        NUMBER
  4  ,       ITEM_NO         NUMBER
  5  ,       ORDER_DATE      DATE
  6  );

Table created.

SQL> INSERT INTO ORDERS VALUES(1,345,TRUNC(SYSDATE));

1 row created.

SQL> INSERT INTO ORDERS VALUES(1,7654,TRUNC(SYSDATE))

1 row created.

SQL> INSERT INTO ORDERS VALUES(1,876,TRUNC(SYSDATE));

1 row created.

SQL> INSERT INTO ORDERS VALUES(2,1,TRUNC(SYSDATE));

1 row created.

SQL> INSERT INTO ORDERS VALUES(2,2,TRUNC(SYSDATE));

1 row created.

SQL> INSERT INTO ORDERS VALUES(2,3,TRUNC(SYSDATE));

1 row created.

SQL> INSERT INTO ORDERS VALUES(3,345,TRUNC(SYSDATE));

1 row created.

SQL> INSERT INTO ORDERS VALUES(3,2,TRUNC(SYSDATE));

1 row created.

SQL> INSERT INTO ORDERS VALUES(3,876,TRUNC(SYSDATE));

1 row created.

SQL> SELECT  ORDER_NO
  2  ,       ORDER_DATE
  3  FROM    ORDERS
  4  WHERE   ITEM_NO IN (345,7654,876)
  5  GROUP BY ORDER_NO
  6  ,       ORDER_DATE
  7  HAVING COUNT(DISTINCT ITEM_NO) = 3;

            ORDER_NO ORDER_DATE
-------------------- -------------------
                   1 02/23/2010 00:00:00

Actions through OpenVPN access problems

Hello!

If you are installing the client OpenVPN for Windows XP (regardless of the MS level) and it connects to the OpenVPN server can (sometimes after a reboot, sometimes right away) the other machine on the other end cannot access Windows XP actions if the connection machine a NetBIOS over TCP/IP (port 139) disabled. The error message is 'no network couldn't take the provided network path."

Œuvres ping and all the firewall is turned off. Sniff the OpenVPN adapter reveals that XP meets port 445 with a RST packet (also called connection refused).

OpenVPN adapter uncheck file service and print server and double check that it makes it work (i.e. XP starts normally answer on port 445 on OpenVPN adapter too). The print spooler service must be restarted too. But this only lasts until the next computer restart.

This would imply that the file and printer sharing service is not related to OpenVPN adapter but netstat - aon | find ": 445 ' watch 0.0.0.0:445 is correctly bound to the process of the system 4.

Gert Döring of openvpn-devel mailing list commented on the topic:

6/26/2010 Gert Doering<*** email="" address="" is="" removed="" for="" privacy="" ***="">

Hello

On Wednesday, 23 June 2010, at 22:50:45 + 0300, Henno Taht says:
> Wednesday, June 23, 2010 at 22:48, Gert Doering <*** email="" address="" is="" removed="" for="" privacy="" ***="">wrote:

> On Wednesday, June 23, 2010 at 09:10:10 + 0200, Jan just Keijser wrote:
> assigns an address 169.254. If it works for you as well, then perhaps the
> tap-win32 developers can dive more deeply into this and find out why windows
> the 'always connected' adapter to treat differently a ' application
> controlled ' adapter.
> >
> I guess that windows services are not "related" to the "dynamic"... interfaces
>
> You mean by dynamic interface, an interface that has "obtain IP address".
' > automatically "set?

No, I was thinking about interfaces that sort of "aren't always there.

But it was a false idea, interface TAP * is * always there - which of
controlled application is if she is 'connected to an ethernet cable.
(virtual, of course) all the time, or only if openvpn, it says so.

But my idea is not really sense – it's like windows would not be
Start windows sharing if the ethernet cable is not connected at boot time.

Gert

(this post never made to archives for a reason, even if Gert cc had openvpn-users and openvpn-devel)

Also, Jan just Keijser openvpn users list said:

2010-6-22 jan just Keijser<*** email="" address="" is="" removed="" for="" privacy="" ***="">

Henno Taht says:

The only thing I can think is that Windows XP explicitly forbidden access to the port 445 as contre-caution unless it comes from a "official" network card

That's exactly how it feels. But why the Windows XP (and only Windows XP) would block OpenVPN TAP adaptor (and only this particular card) service for sharing files and printer (port 445, aka microsoft-ds a.k.a. DirectSMB) and only when the IP map of OpenVPN is configured with DHCP (if you put the IP address manually, no problems).

Is there some sweet security mechanism integrated in the XP kernel that blocks incoming connections on port 445 (controlled by 'System' process with PID 4) if the adapter is 'virtual', even if process control binds to 0.0.0.0?

Hoping someone at Microsoft reads this,
Henno Taht

Hello!

If you are installing the client OpenVPN for Windows XP (regardless of the MS level) and it connects to the OpenVPN server can (sometimes after a reboot, sometimes right away) the other machine on the other end cannot access Windows XP actions if the connection machine a NetBIOS over TCP/IP (port 139) disabled. The error message is 'no network couldn't take the provided network path."

Œuvres ping and all the firewall is turned off. Sniff the OpenVPN adapter reveals that XP meets port 445 with a RST packet (also called connection refused).

OpenVPN adapter uncheck file service and print server and double check that it makes it work (i.e. XP starts normally answer on port 445 on OpenVPN adapter too). The print spooler service must be restarted too. But this only lasts until the next computer restart.

This would imply that the file and printer sharing service is not related to OpenVPN adapter but netstat - aon | find ": 445 ' watch 0.0.0.0:445 is correctly bound to the process of the system 4.

Gert Döring of openvpn-devel mailing list commented on the topic:

6/26/2010 Gert Doering<*** email="" address="" is="" removed="" for="" privacy="" ***="">

Hello

On Wednesday, 23 June 2010, at 22:50:45 + 0300, Henno Taht says:
> Wednesday, June 23, 2010 at 22:48, Gert Doering <*** email="" address="" is="" removed="" for="" privacy="" ***="">wrote:

> On Wednesday, June 23, 2010 at 09:10:10 + 0200, Jan just Keijser wrote:
> assigns an address 169.254. If it works for you as well, then perhaps the
> tap-win32 developers can dive more deeply into this and find out why windows
> the 'always connected' adapter to treat differently a ' application
> controlled ' adapter.
> >
> I guess that windows services are not "related" to the "dynamic"... interfaces
>
> You mean by dynamic interface, an interface that has "obtain IP address".
' > automatically "set?

No, I was thinking about interfaces that sort of "aren't always there.

But it was a false idea, interface TAP * is * always there - which of
controlled application is if she is 'connected to an ethernet cable.
(virtual, of course) all the time, or only if openvpn, it says so.

But my idea is not really sense – it's like windows would not be
Start windows sharing if the ethernet cable is not connected at boot time.

Gert

(this post never made to archives for a reason, even if Gert cc had openvpn-users and openvpn-devel)

Also, Jan just Keijser openvpn users list said:

2010-6-22 jan just Keijser<*** email="" address="" is="" removed="" for="" privacy="" ***="">

Henno Taht says:

The only thing I can think is that Windows XP explicitly forbidden access to the port 445 as contre-caution unless it comes from a "official" network card

That's exactly how it feels. But why the Windows XP (and only Windows XP) would block OpenVPN TAP adaptor (and only this particular card) service for sharing files and printer (port 445, aka microsoft-ds a.k.a. DirectSMB) and only when the IP map of OpenVPN is configured with DHCP (if you put the IP address manually, no problems).

Is there some sweet security mechanism integrated in the XP kernel that blocks incoming connections on port 445 (controlled by 'System' process with PID 4) if the adapter is 'virtual', even if process control binds to 0.0.0.0?

Hoping someone at Microsoft reads this,
Henno Taht

I thought about it... just go into the drive you want to share, click share... click Permissions... add... click click on advanced... click on advanced search now... Select ANONYMOUS LOGON, and then click OK. You will probably even if connect to it using the format "\\192.168.0.1\a", but it works.

Estimate of poor cardinality using Bind Variables

Hi I'm using the 11.2.0.4.0 Oracle version. I have a query that is underway for the plan of the poor execution by the estimate of poor cardinality for two tables (I've extracted and published this part only) as I mentioned below, the individual conditions for which the estimate goes bad and moving entire query execution path.

These are for two tables and currently we use BIND variable for them in our code, and I notice, its best estimate gives with literals. I need to know how to handle this scenario that I need this query to execute for all types of volumes. Is there something I can do without changing the code, as it works well for most of the execution? In the current scenario of the main query that uses those below tables providing a plan (index + nested loop) that works very well for small volume, but running for 10 hr + for large volume as ideally its going to the same regime.
And Yes, most time that this request will be hit for small volume, but killing some appearance of large volume presents the performance of the queries.

Here are the values of the variable binding.

B1 VARIABLE VARCHAR2 (32);
B2 VARIABLE VARCHAR2 (32);
B3 VARIABLE NUMBER;
B4 VARIABLE VARCHAR2 (32);
B7 VARIABLE VARCHAR2 (32);
B5 VARIABLE NUMBER;
B6 VARIABLE NUMBER;

EXEC: B1: = 'NONE ';
EXEC: B2: = NULL;
EXEC: B3: = 0;
EXEC: B4: = NULL;
EXEC: B7: = NULL;
EXEC: B5: = 0;
EXEC: B6: = 0;

---- For  TABLE1-------
 -- Published Actual VS Etimated cardinality
 
 
-- With bind values
select * from TABLE1 SF
WHERE (   (SF.C1_IDCODE = :B4) OR (NVL (:B4, 'NONE') = 'NONE'))
    AND ( (SF.C2_ID = :B3) OR (NVL (:B3, 0) = 0));
Plan hash value: 2590266031
-----------------------------------------------------------------------------------------------------------------------------------------------
| Id  | Operation                 | Name                | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads  |  OMem |  1Mem | Used-Mem |
-----------------------------------------------------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT          |                     |      1 |        |  28835 |00:00:00.08 |    2748 |     46 |       |       |          |
|*  1 |  TABLE ACCESS STORAGE FULL| TABLE1              |      1 |     11 |  28835 |00:00:00.08 |    2748 |     46 |  1025K|  1025K|          |
-----------------------------------------------------------------------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
   1 - storage((("SF"."C1_IDCODE"=:B4 OR NVL(:B4,'NONE')='NONE') AND ("SF"."C2_ID"=:B3 OR NVL(:B3,0)=0)))
       filter((("SF"."C1_IDCODE"=:B4 OR NVL(:B4,'NONE')='NONE') AND ("SF"."C2_ID"=:B3 OR NVL(:B3,0)=0))) 
 
-- With literals 
select * from TABLE1 SF
 WHERE  (   (SF.C1_IDCODE = null) OR (NVL (null, 'NONE') = 'NONE'))
      AND ( (SF.C2_ID = 0) OR (NVL (0, 0) = 0));
   Plan hash value: 2590266031
--------------------------------------------------------------------------------------------------------------------------------------
| Id  | Operation                 | Name                | Starts | E-Rows | A-Rows |   A-Time   | Buffers |  OMem |  1Mem | Used-Mem |
--------------------------------------------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT          |                     |      1 |        |  28835 |00:00:00.03 |    2748 |       |       |          |
|   1 |  TABLE ACCESS STORAGE FULL| TABLE1              |      1 |  28835 |  28835 |00:00:00.03 |    2748 |  1025K|  1025K|          |
--------------------------------------------------------------------------------------------------------------------------------------

--------For TABLE2 ----------------------- 
-- Published Autotrace plan, as it was taking long time for completion, and actual cardinality is 45M, but its estimating 49 With bind value---

--withbind value
select * from TABLE2 MTF
WHERE (   (MTF.C6_CODE = TRIM (:B2)) OR (NVL (:B2, 'NONE') = 'NONE'))
  AND (   (MTF.C3_CODE = :B1)  OR (NVL (:B1, 'NONE') = 'NONE'))
  AND (   (MTF.C4_CODE = :B7)  OR (:B7 IS NULL))
  AND (   (MTF.C5_AMT <= :B6)  OR (NVL (:B6, 0) = 0))
  AND (   (MTF.C5_AMT >= :B5)  OR (NVL (:B5, 0) = 0));
Execution Plan
----------------------------------------------------------
Plan hash value: 1536592532
-----------------------------------------------------------------------------------------------------------
| Id  | Operation                  | Name         | Rows  | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
-----------------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT           |              |    49 | 10437 |   358K  (1)| 01:11:43 |       |    |
|   1 |  PARTITION RANGE ALL       |              |    49 | 10437 |   358K  (1)| 01:11:43 |     1 |  2 |
|*  2 |   TABLE ACCESS STORAGE FULL| TABLE2       |    49 | 10437 |   358K  (1)| 01:11:43 |     1 |  2 |
-----------------------------------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
   2 - storage(("MTF"."C4_CODE"=:B7 OR :B7 IS NULL) AND ("MTF"."C3_CODE"=:B1 OR
              NVL(:B1,'NONE')='NONE') AND ("MTF"."C5_AMT"<=TO_NUMBER(:B6) OR NVL(:B6,0)=0) AND
              ("MTF"."C5_AMT">=TO_NUMBER(:B5) OR NVL(:B5,0)=0) AND ("MTF"."C6_CODE"=TRIM(:B2) OR
              NVL(:B2,'NONE')='NONE'))
       filter(("MTF"."C4_CODE"=:B7 OR :B7 IS NULL) AND ("MTF"."C3_CODE"=:B1 OR
              NVL(:B1,'NONE')='NONE') AND ("MTF"."C5_AMT"<=TO_NUMBER(:B6) OR NVL(:B6,0)=0) AND
              ("MTF"."C5_AMT">=TO_NUMBER(:B5) OR NVL(:B5,0)=0) AND ("MTF"."C6_CODE"=TRIM(:B2) OR
              NVL(:B2,'NONE')='NONE'))
  
-- with literal
select * from TABLE2 MTF
WHERE (   (MTF.C6_CODE = TRIM (null)) OR (NVL (null, 'NONE') = 'NONE'))
 AND (   (MTF.C3_CODE = 'NONE') OR (NVL ('NONE', 'NONE') = 'NONE'))
  AND (   (MTF.C4_CODE = null)  OR (null IS NULL))
   AND (   (MTF.C5_AMT <= 0)  OR (NVL (0, 0) = 0))
  AND (   (MTF.C5_AMT >= 0)  OR (NVL (0, 0) = 0));
Execution Plan
----------------------------------------------------------
Plan hash value: 1536592532
-----------------------------------------------------------------------------------------------------------
| Id  | Operation                  | Name         | Rows  | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
-----------------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT           |              |    45M|  9151M|   358K  (1)| 01:11:41 |       |    |
|   1 |  PARTITION RANGE ALL       |              |    45M|  9151M|   358K  (1)| 01:11:41 |     1 |  2 |
|   2 |   TABLE ACCESS STORAGE FULL| TABLE2 |    45M|  9151M|   358K  (1)| 01:11:41 |     1 |  2 |
-----------------------------------------------------------------------------------------------------------

select column_name,num_nulls,num_distinct,density
from dba_tab_col_statistics where table_name='TABLE2'
and column_name in ('C3_CODE','C4_CODE','C5_AMT','C6_CODE');
C3_CODE 0 65 0.0153846153846154
C4_CODE 0 2 0.5
C5_AMT 0 21544 4.64166357222429E-5
C6_CODE 1889955 71 0.0140845070422535

933257 wrote:

((SF. C1_IDCODE =: B4) OR (NVL (: B4, 'NONE') = 'NONE'))

In fact for literals, I did not find any section of the predicate after running the sql code with activation "set autotrace traceonly explain."

The main problem is with another large query whose cardinality is underestimated due to the presence of these table (table1, table2) with the above mentioned clause, and the query is for the analysis of index + nested with values of Bind loops and take 10 hr +, whereas with literals, its completion in ~ 8minutes with FTS + Hash Join.

Your real problem is that you try to have just a single SQL query handle all POSSIBLE thanks to the use of embedded FILTERS ' either / or ' filters in the WHERE clause. You want only a select this OPTION to run whatever filters have been selected at run time by the user or the application using it. And it would never work. You really need to SELECT different queries for different combinations of filter conditions.

Why? Think for a minute. How Oracle works internally? A SQL SELECT query gets analyzed and an execution plan is produced which is stored in the library cache and gets REUSED on all subsequent executions of this query - except in certain cases where there may exist several plans run through several cursors of the child. So with only SELECT a query you only AN execution plan in the library cache, to be used by all THE executions of this query, regardless of the value of your run-time binding variables.

Lets put another way - each library cache execution plan is associated with a SQL statement. If you want a DIFFERENT execution plan then you need run a DIFFERENT SQL statement. That's how you get a different execution plan - by running a different SQL statement. Running the SAME SQL query generally you will get the SAME execution plan every time.

In addition, because of the "either / or" filters that you use you will end up generally with a full Table Scan on each of the referenced tables. Why? Given that the optimizer must produce an implementation plan that manages all possible contingencies for all values of possible bind variables in the SELECT. If the optimizer should choose to use any index based on one of these "either / or" filters then it would only help performance when real value was provided, but it would be really bad if a NULL value was supplied. If the optimizer ends up ignoring the index because they are not always optimal for all possible input values and instead chose a plan that is "good enough" for all input values possible. That means that it will use a scanning Table full.

I hope you can see that it is precisely what is happening for you with your query. You select this OPTION to manage the different combinations of filter, which leads to the execution plan only one, which leads to scans full Table on the referenced tables in these ' either / or ' filters.

The solution? Build queries SELECT DIFFERENT when input values are NULL. How you do that? Read this article to ask Tom that tells you:

http://www.Oracle.com/technetwork/issue-archive/2009/09-Jul/o49asktom-090487.html

To sum up - when you have real value for a bind variable 'bind_var1' add the following filter to your CHOICE:

AND column_name1 =: bind_var1

When the binding variable is NULL, add the filter according to your CHOICE:

AND (1 = 1 OR: bind_var1 IS NULL)

Now, you'll have 2 queries SELECT must be performed, which have exactly the same number of variables in the same order bind, which is important. When you then run one of these variations, Oracle can analyze and optimize each one SEPARATELY, with a single execution by the SELECT query plan.

When you provide a real value, the filter is a normal 'column = value' that the optimizer can use all indexes on this column, because NULL values are not referenced.

When there is no real value, the optimizer will analyze the '1 = 1 GOLD' and realize that "1 = 1" is set to TRUE and GOLD, it is quite TRUE regardless because the binding variable is null or not. This means that the optimizer will actually REMOVE this filter, because it filters nothing because it is always TRUE. You will end up with an operating plan based on the other filters in the query, which is what you want because you have no filter on this column.

What is it - producing distinct SELECT queries to determine if you have a real value to filter or not you end up with DIFFERENT execution plans for each of them, and each of them is OPTIMAL for this particular set of filters. Now you get good performance for each variation of the performance of the SELECTION, rather than sometimes good and sometimes very bad when using SELECT only one. It is impossible to try to get multiple shots of execution 'optimal' out of a SELECT query. That's why you get mediocre performance under different bound the values of the variables.

John Brady

PCI-7730 does not move in the order of driving different directions?

I have a 7330 motion control card that I'm driving a shaft on both (so never 1 d moves). I need to be able to move in both directions, which is fairly easy to do using a change (modified to include the limits and home) example VI (I think it was the example of 1 d linear motion). To effectively run my stepper motor for my application, in step/direction mode, when moving to the direction of stage negative (for me it is the 'Blue' in my dye laser) I need to overshoot and then come back so that the engine always ends with a movement from the red. I tried several solutions to this problem, including:

1. in a VI copy/paste on the screws under necessary motion in order, but specify a 'number of steps to move' for the second piece

2. call the same Subvi sequentially (so rather than a long VI a VI with calls to conduct main proposal sub - VI) with various implementations of delays and sequencing

The problems I encounter are:

When using a single move VI (then go one direction up to the complete removal), I can almost always move properly, be it positive or negative direction. Occasionally, and especially when you try to go in a different direction than the previous move, the engine is not. I can watch it on my oscilloscope monitoring steps returned by the engine. The stages of start-up, but about 4 pulses in the VI closes with no error reported (and with the release of that word because, it seems that the program thinks that the move is successful). However, when you use the VI that he calls one way and then the other, I can * never * get the second move (the opposite of the direction) to happen. In 20 years, I even put delays between them in a structure of flat sequence without result. However, I can move one direction, and then immediately the same direction successfully with the same code.

I can't find a 'free channel' or the ability to set regardless of the behavior of management (for example, direction set out to a negative displacement before the negative move, then reset for a positive move before the move is necessary in fact). It is quite possible, Miss me a crucial part in my VI main motion, but then I think that the repeated movements of single direction would fail more frequently.

Is there a way to define the direction prior to a move? Or has anyone else encountered this problem and found a solution more "elegant"?

Thank you!

A. Berke

Note: in order to generate enough current to power my motor (it has optically entered remote), I added my own resistance to the stage and the wiring of the direction as they head towards the engine.

I solved this in case someone else has a similar problem. It turns out that he should be careful with the card ID. It can only be called once (so multiple calls to secondary screws using the same ID Board in a "main" program does not work unless the ID is passed to higher level) in a program.

Unable to get the total number of records processed by the processor of trade rules

Details of the environment
======================
Disqualification Version: 12.1.3.0.0

I use a business rules processor to implement multiple business rules on one record and I am looking for a summary of the number of records increased and does not have a specific rule.

To illustrate:
Suppose there are 2 rules, invalid number in Column1 and valid number on Column2.
10 records to process and 3 folders don't rule 1 (valid on column1) and 9 entered failure of rule 2 (valid number on Column2).
In the browser of result of the processor Business, the number of past records and failed is displayed but is not part of the output of the processor itself. In the example above, there will be 1 pass and 9 fail records and given the values of said the total number of records can be derived which is 10.
This is why the expected output will be:
Success of failure
Rule 1:7 (10-3) 3
Rule 2: 1 (10-1) 9
Note: The number of records that failed can be derived from the table of the rule ID but I don't know how to get the total number of records in order to calculate the number of records that a given rule.
I tried to publish the County of acceptance and rejection in the browser of result of the processor Business in an intermediate table and ask the same intermediate table to get the pass and fail values but Disqualification does not allow to write and read the same intermediary object in a single process. What is the best way to get the number of records total handled by the processor business rules? This kind of attributes (that do not exist only in the browser of result) can be included in the output of the processor in the next version of the Disqualification?
In addition, the intermediate table contains only 1 sheet with pass and failure values while the exceptions which have individual failure on each rule contains 12 Archives. What would be the best approach to merge a single record into multiple records according to the example below?
Staging table
Success of failure
1 9
Exception table
Single ID ID rule
Rule 1 Record1
Rule 1 Record2
Rule 1 record Record3
Rule 2 Record1
Exception table with: staging Table data merge
Rule ID ID Unique Pass Fail Total
Rule 1 1 9 10 Record1
Rule 1 1 9 10 Record2
Recording rule 1 Record3 1 9 10
Record1 rule 2 1 9 10

Please notify.

Hi Jason,

The best way to explain how to do this is with an example project (DXI). I'll send you one in offline mode.

-Mike

REQUEST FOR PLANNING OF EMP - NUMBER POTENTIAL FOR HUGE BLOCKS

Hello world
I'm having a very hard time understanding the potential number of blocks, we have an application created with active CAPEX, here are the dimension planning, all are sparse dimensions, only account and time dimensions are dense:
Dimensions: members stored
Account 132
Period                                  14
Cost center 210
year                                     17
Details of the assets 2576
Entity                                   30
410 asset class
Currency 3
Scenario 7
Version                                5
HSP_Rates 6
In order to get the size of the block, I calculate the two dense dimensions which is on about: 14784 bytes
In order to calculate the number of blocks that can I have to multiply scattered sizes stored (210 * 17 * 2576 * 30 * 410 * 3 * 7 * 5 * 6) = 71262283680000-> if I see it in the statistics of the easconsole show me tab a different value of 127640304247680 this value is greater then from above (no idea)
the potential blocks are huge, and I don't know if there is a problem with the design because if you turn on capex and then add class and the details of the assets and imagine that a society is to have 10000 assets when that happens? can someone please guide me if we have forgotten something maybe we don't him have not properly configured OR it's just the number and we can ignore it (I've already raised this with the support of the Oracle)
I hope that it is EMP gurus out there who can address this issue...
Thank you
Concerning
Shahrukh

This is the number of blocks, it does not mean that you will load data from all potential blocks.

This is a guideline and the rest fell to application design.

See you soon

John

Order is created for the anonymous user without persistence of profile

Hi all
Could you please specify o how to implement below scenario
Order is created for the anonymous user without persistence of the profile using cookies. So that when the user visits the site next time we can load
order/cart previous from browser cookies.

Yes, you can do that, the orders can be persisted without persistence of profile, but persistence of anonymous orders will increase the number of orders in the table quickly and can have an impact on performance, so if you plan to do it this way then make sure that your AbandonOrderScheduler job is running to clean up orders.

Paid for CC, got a serial number but no confirmation of purchase

I recorded on 1 February, then I got an email saying the order processing system is currently unavailable due to some problems. "The order is verified and processed shortly. Within 24 hours, you will receive an email with the status of your order, which could contain information on how to download the product or to verify the status of the shipment. You samples of any amount until the order is processed. »
I never received any other mail after that. I went to check the status of my order using my serial number; He said "we have no orders to your account found". "
How is that possible? Even if the problem were it not was not enough money in my card (unlikely, given that I had loaded precisely to make this purchase) should not Adobe informs the user on this issue, saying that the command could not be processed due to technical problems with the payment? Instead I never heard of the Adobe staff since then.
Please let me know what I need to do, thank you.

Hi Julia,

I see that the order placed on 1 February 2016 has been approved for payment by Paypal on February 27, 2016, the money is not yet processed.

Previous transaction rejected by Paypal as mentioned above.

You can check if the payment crosses now, if it does not, please let us know or you can contact support contact customer to trigger a request for investigation.

Concerning

Stéphane

Check the status of the order and order # confirmation e-mail has not been found.

Hello
having my order with my confirmation number but when I check the status of the online order, the order number in the email was not valid you are invited by the site.
Please help.
Thank you and best regards,
Celine

It could be a problem of activation.

Please see the below help documents:

Applications creative Cloud back in test mode after an update until 2015 for CC

Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

Order binding OpenVPN TAP number

Similar Questions

Maybe you are looking for