order of standalone AP

Similar Questions

• updates are planned in order to install when it updates and I made it impossible to get on internet explore? __

  updates are planned in order to install when it updates and I made can not get on internet explore

  Hi Marc,

  • You receive an error message when you try to access the internet?

  I suggest you to reinstall the update from Windows update and reproduce the error and check the update is the origin of the problem and after return.

  Step 1

  You can check which was the update has been installed on the computer and after return. To view the update history, follow the steps below:

  a. open the Control Panel, select display by the small icon and click the Windows Update icon.

  b. click on the link to view update history.

  to view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 2

  You can also access see installed updates on your computer and check the updates have been installed on your computer until this problem started and after return to the update's KB number.

  To do this follow the steps below:

  a. click the Start button.

  b. click Control Panel.

  c. click on programs and then, under programs and features, click on view installed updates.

  Uninstall the update has been installed before this problem began, view installed windows updates and see if it helps you to solve the problem.

  Step 3

  You can try to download the stand alone, updates and try to install it and check if it helps.

  To download the standalone version of windows updates follow the steps below:
   
  a. take note of the update with the Ko only when your computer tries to update and install it.
  b. visit the following Microsoft Web site: http://www.microsoft.com/downloads/Search.aspx
  c. search by downloading the update.
  d. save it on the desktop.
  e. try to install it manually.

  Step 4

  You can also try self-test built in Windows 7 Internet Explorer troubleshooting after you install the update and check if that helps you solve the problem.

  To run the Internet Explorer troubleshooter, follow these steps:

  a. close all programs.

  b. Click Start and then click Control Panel.

  c. under system and security, click on find and fix problems.

  d. in the left pane, click View all.

  e. click Internet Explorer Performance. This opens a new window.

  f. click Next.

  (g) the resolution of the problems run and try to solve all the problems identified automatically. Click Close.

  After the store has run successfully, check to see if you receive the same error.

  Also access the link below and follow the steps to solve the problem with Internet Explorer.

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Hope this helps and let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Does anyone know the Microsoft URL to order a CD of the WinXP SP3? Thank you

  I couldn't find using search engines of Microsoft.  ISO images and downloads can be found, but would like to get a CD if possible.
  Thank you!

  http://support.Microsoft.com/kb/322389#method23

  Click on the link "Order Windows XP Service Pack 3 on a CD".

  But I would say that, instead, you download the standalone installer here...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  .. .and save it so that you can use as many times as you wish. If you want to burn on CD.

  Tricky

• I use a D110a as a standalone Copier. However, I can't copy.

  I use a D110a as a standalone Copier.  However, I can't copy. I select copy (OK), color print (OK), the number of copies (1) and it puts me right at the beginning. Tried the power reset, but does not work. What can I do else?

  Looks like the printer is in a non-responsive State.  There is a document with steps to help resolve when a printer is out of order, found here.

  However, a restart of the internals of the printer may be in order to get this device in operation.  I'll send the steps to perform the factory reset via private message.  Before performing the steps, please read the thread of Bob_Headrick printer resets.  This thread is here.

• Ordered the wrong access point!

  I thought that I had ordered a 1130ag but looks like I ordered a 1131ag LWWAP.

  Please could someone tell me what the difference between a 1130 and 1131. I understand I can load the IOS on the light AP software using a tftp server, but I do not know which exit to load on this subject. 12.3JX, 12.3JA, 12.3JEA, 12.3JEB! can anyone help please? either by the way, I am in the United Kingdom, do not know if this affects image to install. Thank you.

  Hi Paul,.

  This happens all the time, so it shouldn't be a problem :) I'm guessing that you have received this AP - AIR - LAP1131AG - x - K9 LWAPP. When you really wanted this AP - AIR-AP1131G-x-K9 Cisco IOS software. Look at the comparison;

  http://www.Cisco.com/en/us/products/ps6087/products_data_sheet0900aecd801b901c.html

  That being said, you should be good to go with 12.3 (11) JA1.

  To access Cisco Aironet to Cisco IOS version 12.3 Points (11) JA1

  http://www.Cisco.com/en/us/docs/wireless/access_point/iOS/release/notes/b11jar1n.html

  Cisco IOS version 12.3 (11) JA1 supports 32 MB independent platforms. 16 MB platforms and platforms supported by Cisco IOS version 12.3 (8) JA and earlier versions (350, 1100, 1130, 1200 and 1230 access points and access point/bridge 1300 series) are supported by Cisco IOS version 12.3 (8) JEA1.

  Do not install a "JX" (it is a software image support to upgrade and recovery Cisco Lightweight Access Point Protocol (LWAPP));

  These release notes describe features, improvements, and caveats for Cisco IOS release 12.3 (11) JX1.

  Note: This version must be loaded on points of access to the plant or by using the lightweight stand-alone mode upgrade tool. Your access point may become unusable if you install this software without using the upgrade tool.

  http://www.Cisco.com/en/us/docs/wireless/access_point/iOS/release/notes/b311jx1.html

  Returning to standalone Access Point

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272

  You can convert an access point of the mode light return to autonomous mode by loading a Cisco IOS version that supports stand-alone mode (Cisco IOS release 12.3 (7) JA or earlier version). If the access point is associated with a controller, you can use the controller to load the version of Cisco IOS. If the access point is not associated with a controller, you can load the version of Cisco IOS using TFTP.

  By using a TFTP server to revert to a previous version

  Follow these steps to return mode LWAPP stand-alone mode by loading a version of Cisco IOS using a TFTP server:

  --------------------------------------------------------------------------------

  Step 1 the IP address of the computer on which the server software runs TFTP should range from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure the PC contains the file access point (for example, c1200-k9w7 - tar.122 - 15.JA.tar for a 1200 Series access point) in the TFTP server folder and the TFTP server is activated.

  Step 3 Rename the access point image file in the folder of the TFTP server c1200-k9w7 - tar.default for a series of 1200 point, c1130-k9w7 - tar.default of access for a series of 1130 access point and c1240-k9w7 - tar.default for a series of 1240 access point.

  Step 4 connect the PC to the access point using an Ethernet category 5 cable (CAT5).

  Step 5 disconnect the power to the access point.

  Step 6 push the MODE button and hold the button while you reconnect power to the access point.

  Step 7 hold the MODE button until the status of the LED turns red (approximately 20 to 30 seconds), then release.

  Step 8 wait until restarting access point, as indicated by the LEDs become green followed the status LED flashes green.

  Step 9 after the access point reboots, reconfigure using the GUI or the CLI.

  This doc.

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272

  I hope this helps!

  Rob

• Convert EPMA Essbase in Standalone Essbase

  Hi guys,.

  I'm working on an existing application to Essbase BSO. It seems to be an application of EPMA. But when I'm checking the last deployment status, I could not see anything like that. I could see that created the application date and date last modified. These dates are 2 years back. But business users are adding members and make the restructuring for the past two years to each month. That's why I think that although it is an EPMA Essbase application, it is not synchronized with EPMA and they use it as a standalone application Essbase. Now, I need to do the hourglass for this app Essbase model optimization. But I couldn't do this in EAS console,, as in an application of EPMA. 

  Now if I change the order of the dimensions in the workspace, of course, I need to deploy it.  But if I deploy my application Essbase in EAS so far would be in sync with the obsolete EPMA dimension. Could you please help me to achieve this optimization of hour glass without touching the workspace. It is also possible to convert the EPMA Essbase asks Essbase standalone application.

  Note: The current state of the application of EPMA Essbase is "deployed but lack of shared services.

  Its urgent for me. Help, please.

  Hello

  But what exactly do you want? you say you want to keep an EPMA application, but you do not want to touch the workspace?

  An Essbase application artifacts of nothing more than its outline, its data, its filters and other. So if you make a copy of your service Regional application, remove the application in the space of work/epma, probably clean up a fair bit in case the app folder and rename your copy app its original name, then you will have a standalone app Essbase.

• I have problems with the standalone version of Lightroom 6.

  I have a problem with Lightroom 6 - so much trouble that I'm currently impossible to use.

  (1.), I bought the standalone version of Lightroom 6 - CC No. I bought the disc, not a download.

  (2) I installed and used for months without any problem.

  (3) when I clicked on the icon on the desktop to open it - about three weeks ago, I got a message that I could buy (1) or (2) try it for 30 days. Of course, I couldn't choose one of these options because two of them would require me to pay for the program, either immediately, or within 30 days, if I wanted to continue to use it. If I deleted this message, Lightroom would not open. So, I was locked out Lightroom even though I had already paid for it.

  (4) given that I got the disc, I decided to reinstall Lightroom. This allowed me to use Lightroom again. I've been using this new facility without problem for several weeks; However, when I clicked on the icon of the office tonight to open Lightroom, I got the same message again: buy it or agree to a 30 day trial. So, I'm locked again.

  (5) I decided to install again. I managed to install the program on the disk; However, when I tried to open Lightroom, I received the message (not the exact wording): "you have installed Lightroom on computers too ' or maybe it was ' you used this serial number for facilities too - something along those lines." (I can't raise the message again, or I'll give you the exact wording). So now I'm completely locked.

  (6) before these challenges, I got Lightroom installed on my main desktop and on a laptop that I used when I travel. That's two facilities, and I installed twice on my desktop computer to try to circumvent the problems described above. However, I carefully watched my installed programs and there seems to have only a single installation of Lightroom 6 - no step three.

  (8.) I would like any suggestions to fix this mess.

  Thank you.

  Roger

  Hi Roger,

  My apologies for the trouble you've had to go through.

  I've updated your records and you should be able to use your license now.

  When you receive the message about the trial or a 30 day program, you should be able to choose the "Software license" option and activate using your key in order to to use without getting to re-setup.

  Concerning

  Claes

• LR 6 standalone upgrade

  I bought the standalone update LR6 today, 5.7, in order to access the new features such as HDR & grad filter masking - but neither are available. Any ideas?

  When you say they are not available, because the clarity are you clicking on the images you want to merge with the right button of the mouse, one of the given options is merge, then HDR or Panorama.

  You can get there, but the options are not there?

  Otherwise I would check the upgrade actually happened or that you do not even accidentally use LR 5 that may have been left on your machine

  When I installed my updated LR 6 to level I have had LR 5 on my Mac, the icon in the dock was actually LR 5 not the new LR 6. Took me a few minutes to work as I thought (wrongly) that LR6 would actually replace LR 5, but instead it installed, it thus.

  Worth a visit if you have not already done so.

• Save an ESXi 4.0 virtual using the VCenter Converter Standalone

  I'm having a 'moment' here because it's been a while since I've done it.

  I have a Windows Server 2008 virtual machine running on ESXI 4.1. I want to make a one-time backup of the virtual. It's a Terminal Server I don't need of daily backups, etc.

  I have it in mind that I can do this with the VCenter Converter Standalone. I downloaded and installed version 5 of this.

  When I tried to communicate with the virtual virtual "Machine VMWare Infrastructure" using the converter drop-down I get this:

  Unable to reach the specified host 192.168.254.154. The host may not be available... or management on this host services do not react.

  The IP address is correct. Am I missing something here? Management services? I put the VM converter on this virtual server Client?

  The goal is to get the hard local machine in order to restore it in case of failure.

  Thank you very much.

  Mike Gallery

  you will need to have comments turned off for export as OVF, but you don't need to use the converter.

  Also, in the future, if you use the converter and a source of 'VMware Infrastructure virtual machine', the virtual machine must thus put off.

  .. .and to return the FVO in your inventory... File - deploy OVF

• Converter Standalone server and agent for Windows.

  I need to convert .sv2i Symantec backup images to virtual machines.

  I read that the format is supported only by "Converter Standalone server and agent for Windows.".

  I installed VMware vCenter Converter Standalone Client 4.0.1 but it does not recognize the input format.

  Must what else you install in order to perform the conversion?

  Concerning

  Marius

  Hello

  Sorry for the late response

  Please reffer to the following link

  http://www.VMware.com/support/converter/doc/releasenotes_conv401.html

  It may be useful

  concerning

  Maniac

• Preloader, loading the file order, export of classes

  Hello. Just a few general questions about loading files and preload.
  
  1 I have several xml, css files and images that need to be loaded. When lucky, can I load them all at the same time or provide an order and only load a file when the previous has finished loading?
  
  2. I want to use a preloader to indicate the loading progress. Should I use a main.swf with only the preloader and then load all the necessary files (even if it's only one) in it or have any on the main.swf and when the preloader finishes just goes to an another frame/scene/what either?
  
  3. I created several custom classes. Should I, if possible, export to a post of the preloader framework?
  
  Thank you for your time!

  1. it is only important if you want to start to do something after one of them, loads and do not make the user wait more long, then as the other loading.

  2. your choice. but generally, you'll have fewer problems with a standalone preloader. for example, question 3 will be moot.

  3 matters only if you classes are great together.

• You place your order on the Apple Site

  I ordered a 7 IPhone September 21, as it was very
  hard to get one at the store here in Rome, Italy
  at that time. Today, 7 October, I see that the IPhone is available to any
  store, but I have still not received my... and shipping follow-up shows that
  the phone is always located in Amsterdam, Holland. This means that it will be
  probably need another 7 days to be delivered to me! Now, I want to only disclose my
  concern that I think that what makes an online prescription should be advantaged
  otherwise it's not really a reason to buy
  an article on the Web Site!

  And this is the last time I'll do so!

  Thank you!

  Greetings from Rome

  !

  Don't know what your question on the iTunes Store, but you already know that you talk only to other users on these forums and that Apple are not here - if you want to contact Apple using the 'contact us' link at the bottom right of each page here.

• Change order number/special character artists

  I would like to know if there is a way to change the order of all the artists that begin with a number or a special character order. Currently, they are all sitting at the bottom of the list of the artist on the ipod (and iTunes) but I would like to have all displays at the top of this list.

  This is the sort order...  I think you would need to change the names of the artists so that they start with something that gets sorted at the top of the list in alphanumeric order.  For example, replace 10,000 Maniacs a_10, 000 Maniacs.

• My photos and videos are not in chronological order, when I export the Photos app

  Hello. When I export my photos and videos from the Photos app on my iMac all the photos and videos are not in order. I need all the photos in good standing - I need to export about 5 000 pictures of the application in order for a meeting next week! Help, please!

  Ethan.

  This is not photo - it is a function of the viewing program (probably the finder) - once the photos are exprted form pictures you can see then in different ways which you control, Photos does not - by the finder you can view by name of son, byt several dates, by file size, etc.

  Usually, the best way to accomplish what you want is to export using the names of batch file numbeing and then sort by file name in the program viewing

  LN

• Impossible to place an order unlock iPhone 7 over 256 GB silver color online

  I can't unlock iPhone ordering 7 more than 256 GB silver color online. Also, I checked with my ISP (AT & T) in the store. Update received saying pre-paid AT & T customer can't place an order for me. And suggested I check in the Apple store. Please suggest me without contract, how to buy iphone 7 more

  Today, I visited the Apple store. Representative informed me that they cannot place an order for customer prepaid with any carrier (AT & T or T-mobile) even if you are willing to pay the total amount in advance.