Organizer (bridge) does not connect to Android Lollipop

Similar Questions

• The network bridge does not connect after resume the S3, Windows 7 x 64 & x 86.

  I installed a network bridge between my wireless network card and a local LAN port on my motherboard, I have my xbox connected to the LAN port and the wireless card has the connection to the internet.  Everything works as expected and I have full access to the internet on PC and xbox.  Issues occurs when I upgraded my PC to sleep and then wake the system, wireless connection works as expected and can see my router but the network bridge not be re - not connecting, I have to disable the bridge then turn it back on until it will work...
  The same Vista configuration worked without problem.

  I'm having the same problem as you, I'm trying to use my laptop to connect my Xbox 360 to my wireless network. It works very well, I have to disable and then re-enable the Miniport MAC bridge or a connection to the Local network after every sleep sleep before that it will work again.

  I noticed that I can not ping even the Xbox until one of these actions is carried out, I don't think that it is actually a problem with the network bridge, but with the ethernet connection (Marvell Yukon 88E8038 PCI-E Fast Ethernet Controller for me). I agree I think that it is an OS problem because I also do not experience the problem with ICS but then cannot be a State of NAT open for the 360.

  An obvious solution is a script that you can run to disable and re-enable the connection to the Local network, someone there at least an easy way to do this?

  EDIT: actually I think I just solved the problem by doing exactly the opposite of what I saw as the solution proposed several other places.

  1. open Device Manager

  2. Select the network adapters, find your ethernet card, do a right click on it and go to properties

  3. click on the power management tab.

  4. make sure that the "allow the computer to turn off this device to save power" box IS COCHEE

  5. apply the settings, and then click OK.

  FACT

  I hope this helps you.

• Lenovo Yoga 2: does not connect to Android AP

  Hello

  Im just having a problem with the connection of my yoga 2 to my phones wifi hotspot.

  It connects perfectly to any other wireless network, just do not like Android AP for some reason any.

  All that says is "unable to connect to this network.

  Any help appreciated,

  See you soon,.

  Lachy

  (1) are other devices able to connect to the hotspot wifi on your phone and use it?

  (2) you can select Wifi on Yoga 2 and click Forget network.

  Swicth hotspot on phone off and restart.

  Try to connect again between the 2 Yoga.

  Let me know what you find in following each of these things.

• 9791 Bridge does not connect with windows7

  I want to connect my gateway WSN with my PC directly. So I used crossover cable to connect and also set my IP. I have Windows7 as my operating system. But, after you connect to it, it's show no network access and a yellow triangle on the network icon. And the gateway is also not detected MAX I 10 of Labview. But, if I do the same process in XP, then all things are smoother and MAX detects the gateway and I become able to communication. What is the problem? Help, please.

  It works... my WSN software has not been installed correctly. After reinstalling, it works... Thank you very much...

• Adobe Bridge does not allow me to connect to my camera and download pictures.    Apple Mac, Canon 5 d

  Hi, I work with an Apple Mac and a canon 5 d.    Adobe Bridge does not connect to my camera and download my pictures, I think there is a problem between the last update apple and Adobe.   Is there a solution?

  Hi Tralaup,

  What version of MAC OS x are you using?

  If using MAC OSX 10.11.Please refers to adobe Bridge doesn't recognize not some devices on Mac OS 10.11

  Kind regards

  Assani

• Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

  Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

  The airport connects using DHCP in Bridge Mode

  The router address is 192.168.80.1

  Address IPv4 is 192.168.80.2

  DNS server is the same as the router, but grayed out

  Mac Mini IPv4 Address is 192.168.80.3

  IPv6 automatically configures

  Also updated the firmware of the airport; no change.

  ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

  Any ideas to fix?

  Thank you.

  Post edited by: en maschera

  but my my Mac mini does not connect to the internet.

  The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

  Hello

  Network preferences may be damaged.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

  Then open AirPort Utility located in HD > Applications > Utilitiies

  Make sure that both Internet and Extreme are green.

  

• Ink advantage 2545: changed the name of the wireless router and now ink advantage 2545 does not connect and I'm out of ideas

  I have a Toshiba laptop 64 bit running Windows 10 Home, 8 GB, 1 t hard drive.

  Router is a Samsung phone using Android because it was the only router that I could find which would take the wireless signal.

  I live very pastoral, no neighbours for miles, so I never saw the need for a password on my router.

  Now, some people are installs in less than 400 feet from me, and I think they're piggybacking on my Wifi because my access speed has slowed considerably since they moved in.

  So I decided to change the password of the router, unfortunately, I can not put in any password I want.  It gives me the opportunity to have a predefined password.  So I changed the name of the router I could do without problem.

  My computer very quickly without any problem, however, my printer which worked great for a year with the old router name does not connect on the new name of the router.

  Here is what I tried:

  I had hoped he would ask me for a new name / password, but it did not.

  Then I plugged a cable between the printer and the laptop in the hopes that it would produce a different kind of results.  It has not changed anything.  There is no screen menu on what that be like this on the printer.

  I pressed the wireless button that has the flashing blue light and nothing happened.

  I pressed the button, don't know what it is, but it has a white light, and nothing happened.

  I went on the HP site and followed the instructions but he just said do not connect the cable until told to do so.  So I disconnected everything, lights out and turned back on and still no connection and no invite to plug whatever it is.

  Y at - it everywhere where I have being a novice could get instructions on how to get this working?

  I appreciate any help you can give me.  Thank you.

  Hello

  I think you are talking about SSID. Please, think of it as a new router and use the following ways to correct:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
  
  Kind regards.

• HP Slate 7 more does not connect to iPhone personal hotspot

  My new tablet, slate 7 more, c. 4.2.2 kernel v. 3.1.10 - g2630132 does not connect to my iPhone 4, ios 7.0.6.

  The Tablet works fine on wifi router database connections.

  The Tablet sees different iPhones when the personal hotspots are active on these phones and I can enter the security keys.  The Tablet shows "signal strength Excellent and"WPA2 PSK security."  However when I press "Connect" the Tablet shows the hotspot iPhone simply as 'Saved, secure with WPA2.'  The Tablet does not actually connect.

  My goal by purchasing this tablet had a portable device that I could work out my phone personal hotspot.

  Suggestions, or can someone point me to a FAQ tip or tech that I might have missed?

  Thank you.

  Hello

  I was able to connect to Iphone 4S my son without problem.

  I had to make sure I typed the passkey precisely, and by clicking on the check box "Show characters" did help.

  I've seen some messages on the internet where there is Android devices connection problems if the phone name had special characters in it, but we still managed using a name such as "batman Iphone 4»

  You can also make sure there is no special characters in the name just to be safe.

• Pavilion G6 does not connect to the cellular device

  I have a Pavilion G6 with Windows 7 OS, which is used as a mobile data terminal. I am trying to use my iPhone Verizon 5 c to connect to a hotspot. All my other HP laptops connect to this phone without problem, but the G6 does not connect to the internet via the phone with cable, wifi or bluetooth. The G6 recognizes the phone and shows it in "unspecified devices." I tried everything to get it to connect without success.

  Hey RC800,.

  Thanks for the info.

  I forgot to ask before, can you tell me the exact model specifications what do you use? For more information on the search for your model and product numbers, click here: How can I find my model number or product number?

  If the laptop connects to other devices, we can say that the material is very good. If he does not see the iPhone theres only a few things you can try. The adapter in your laptop is probably 802.11 g capable which is the minimum requirement for the hotspot iPhone, so we can exclude.

  Please, try the following:

  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test another iPhone connection:
  Explicit. This will tell us if it's only an incompatibility with a phone or any iPhone hotspot. Try a hotspot Android will help narrow things down as well.

  Let me know if this helps.

• New HP Envy DV6 - 7202SE does not connect.

  Hi, I bought a HP Envy DV6 - 7202SE 2-3 weeks, everything was working fine and one day the Wireless does not work...

  All other devices in my house (IPAD, iphone, Android phones) thus communicate them with the Linksys WRT120N router, but my laptop does not connect.

  I tried with the network cable and he surfed the net fine, but the Wireless does not work.

  It also shows the name of the network in the list of available networks, but as soon as I connect it after you enter the authentication key, the connection is not successful.

  I even formatted the computer to its factory settings, but still it does not connect. I checked Device Manager and the drivers updated and everything goes well it... but it does not connect to this router. I tried to connect to my wireless router and it works perfectly... but with Linksys WRT120N router it has stopped working suddenly. Do I have to update the firmware?

  Kind regards

  Amir

  Disable the security on the router and connect temporarily without security.  If successful, go back and add WPA2-AES and try again.

• PlayBook of blackBerry Smartphones does not connect to the WiFi PRIV "hot spot"

  BlackBerry PB does not connect to the WiFi PRIV "hot spot". Implements immediately with an android tablet based - Hudl of Tesco UK - but the PB comes not to connect to the private. Reading through various bulletins and cannot find anything obvious that I missed. PB connects to the other wifi fine.

  Sorted. And so simple. Just changed PRIVATE WiFi "hot spot" to 5 GHz. thanks to Bruce using BlackBerry.

• Samsung Galaxy S3 does not connect to the DELL laptop

  Hello

  I use the operating system Windows 7 Home Premium 64 - bit with the Intel processor i5-2450 M CPU @2.50 GHz. recently the past 4 months, I have observed that Samsung Galaxy S3 does not connect to the Dell laptop

  We could not see the content of Samsung Mobile in the PC. No Popup message is coming

  I tried the options below

  1. connected with different cable to the laptop, the original cable

  2. try with Samsung Kies

  Can you please help us in this regard that I wasn't sure if the drivers problem.

  We have seen the error in the mobile below.

  "Could not find the software on your computer that can recognize your device.service Pack 3, Windows Media Player, version 10 or greater, for Android File Transfer for MAC OS or Windows XP must be installed.

  You can download and install Kies on your http://www.samsung.com/kies computer to synchronize with your device data, back up the data and upgarde your device (Windows and Mac OS are supported). »

  I use Windows 7 and Media player version 12.0.7601.18150.hence was not, of course, why the Samsung Galaxy S3 does not connect to the DELL laptop

  Thank you

  Kalyan

  Hi Kalyan,

  From my research, this error message indicates that you have an old version of Samsung drivers installed on the computer.

  Several clients are faced with this question after that they have updated the version of Android to 4.3, but the version of the driver is not updated.

  I suggest you uninstall all traces of Samsung is installed in the list programs and then reinstall the device drivers Samsung from the link provided in the previous post.

  To uninstall a program see the link below.

  Uninstall or change a program

  Once you uninstall programs related to Samsung download and install the drivers for Samsung devices.

• in network bridge does not

  Hello

  I use VMware-player - 7.0.0 - 2305329, when I set up network bridge configuration to connect to the local host network, it does not connect and even its not throw errors in VMLog as well as in the event viewer.

  Local system configuration:

  Windows 8

  Intel core i3-3220 @3. 3 GHZ processor

  8 GB RAM

  Realtek PCIe GBE Family Controller version 8.21.909.2013

  Comment system configuration:

  Windows Server 2008 R2

  6 GB of Ram

  Here's what I tried to solve this problem.

  1. uninstalled and installed VMWare bridge Protocol in the local host network properties.

  2 uninstalled vmware player and all instances of the registry and the c drive and cleaned the system using registry cleaner, rebooted and installed the new version of VMware Player but still the same problem exists.

  3. reinstalled VMWare tools in guest operating system.

  So what you guys think about this problem, is it a solution?

  Thanks in advance,

  Bibiane.

  Hello

  I solved my problem by following this LINK .

  In fact, the problem was with the kaspersky antivirus (follow the link above) that was installed on my computer, here is the procedure I followed to make it work.

  1 uninstalled the kaspersky anti-virus.

  2 uninstalled VMware Player.

  3 reboot the system.

  4. installed in VMware Player back and make sure that the bridge network is working properly before installing Kaspersky return.

  5 reinstalled Kaspersky.

  and Voila Any return in the normal phase and my VM connects to the localhost network.

  Hope this helps someone.

  Kind regards

  Jung Lee.

• the perimeter network on vmnet0 Bridge does not work

  Hey there ' All,.

  I've been running VMware for more than 8 years on workstation or server, but I have a last question a few days and I don't seem to be able to solve it.

  Here is some basic information:

  1. Windows 2003 x 64 sp2

  2. I have 4 nic (broadcom and intel)

  3. This server is running for 3 years. Dell 2950 2cpu Quad, 16 GB

  4. started with VMware Server 1.0.0 and am on VMware Server 1.0.10

  5. 5 VM work without problem.

  6. the server was at 6 or 7 months. has decided to update Windows.

  7. I shutdowned all these 5 VMs.

  8. (35 updates) windows update

  9. rebooted with no problems

  10. the host works very well. access to the Internet. everything is good.

  11. Start the vmware console and start one of the virtual machines (windows server 2003)

  12. system starts with the error: "the network device VMnet0 Bridge does not work. the virtual machine will not be able to communicate with the host or other machines on your network. virtual device ethernet0 will start disconnected.

  13. This massage is for all virtual machines.

  14. last thing on virtual machines: all NIC 2 (bridge and customized to VMnet1) running. That's how since 2007.

  what I've done since:

  1. Reinstall VMware 1.0.10

  2. restarted the server host

  3. update of two network cards (2 x broadcom and 2 x intel)

  4. I read on this forum that could be challenged NIC Cluster NIC but I've not grouped NIC

  5. played around with the settings of the host virtual network. removed changed etc... no luck

  6. I hear everywhere that under "automatic gateways" I need to uncheck. This could be the right track but that checkmark is grayed out.

  any pointer would be very appreciated.

  see you soon

  Have you checked that the 'bridge' is enabled on the physical to use network connection?

  Disabled all firewall?

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• BDPN460 does not connect to internet

  I just upgraded to a combined modem / router with a Motorola SBG6580. The blu - ray player is connected by a WET610N wireless bridge but now the blu - ray player does not connect to the internet. The drive is connected to the network and I have about 5 other devices that connect via the modem. All these other devices work fine, and the only device that I have a problem with is the blu - ray.

  I tried various fixes and none work, he can't seem to find the servers. Any suggestion is welcome.

  Fixed! Everything is operational.