ORIGINAL ERROR CODE 80040256 DELL SLIM B230

Similar Questions

• I have no sound (error code: 80040256)

  original title: I have no sound...

  I have an error code 80040256 when trying to use Media player.

  A window pops up that says that "Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.

  I went under the devices and system tools and it tells me that there is no audio device. Please advise & assist. thanx DJL

  I have an error code 80040256 when trying to use Media player.

  A window pops up that says that "Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.

  I went under the devices and system tools and it tells me that there is no audio device. Please advise & assist. thanx DJL

  Download and install the device drivers for some audi device / sound (hardware) is installed on your computer.

  Not knowing what brand specific & model computer and/or what brand specific & model device audio, high fidelity, you have, at this stage I can't better direct you to exactly what you need - but you should be able to review the specifications of your computer on the web site of builders/drivers/support download and get what you need.

• All USB Ports no longer works after that Windows 7 update error Code 52 Dell Inspiron

  How repairing USB ports when they have all stopped working after updates. Error Code 52 Dell Inspiron 1720. Pilot not signing not recognized.

  You can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• error code 80040256.

  After doing a complete reinstall of windows XP on my Dell dimension 4600 everything was OK apart from having the above error code. I don't know what sound card is installed so that a driver can be found. It would be just as easy to put another card.

  Hi Dave,.

  Welcome to the Microsoft community!

  You receive error message 80040256 in computer.

   

  This can happen if there is some problem with the audio drivers.

  To help you better, we need more information.

  1. When do exactly , you get the error?

  2 - is the full error message?

  To work with the issue, I suggest you follow these steps:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help?T1=tab04#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab3

  You can get the audio drivers from the site:

  http://www.Dell.com/support/drivers/us/en/04/product/dimension-4600

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Power error dvd 80040256

  I just got my dv6t 7000 quad edition with blu - ray player, but when I tried to play the blu - ray with power dvd supplied with the system, it shows

  80040256

  Internal error

  Is this a problem with the hardware or software? If the problem is with software, how to fix?

  Hello

  Yes it is a software problem. You can try to reinstall the drivers and Support HP Power DVD:

  CyberLink PowerDVD 10 (2D/3D) ►

  If this does not work, make sure that you have run all the updates from HP to HP Support Assistant and also all the windows updates. HP updates using updates from HP Support assistant should operate.

  If none of these works then try this:

  Internal error error Code 80040256

• Error codes 0 x 643, 0 x 80070643 and 0x8007066F - cannot install updates

  origin: Error Codes 643 0 x, 0 x 80070643 and 0x8007066F

  I have Windows XP and have not been able to install updates... continue to get error Codes 0 x 80070643, 0 643, the 0x8007066F... what's up with that?

  Hello

  You can follow the steps from the link below: you receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update Web sites to install updates: http://support.microsoft.com/kb/958052

• Update of MS by giving the 0x8024402C error code when upgrading to the new MS update schema

  I use a completely updated version of XP Professional.  I run an independent firewall

  Update MS used to work until he told me I had to go to the new version.

  Currently I get the 0x8024402C error code.

  I used the program of fixit MS for update problems. Whenever he claimed to correct the error. But it did not work.

  I followed the correction suggested to clear the exceptions lan then use the cmd line to stop and restart the update service. did not work.

  Fix used who said lan value automatic dectet, and received the 0x80072EFD error. Put lan affecting original return and went back to the original error code.  Any other ideas?

  Hi robertTrinitie TCh.,.

  Thanks for posting in the Microsoft Community.

  I understand that you cannot install the update of windows, and you receive the 0x8024402C error message

  I suggest you to see link and check.

  0x8024402C error code when you try to install updates on Microsoft Update or Windows Update Web sites

  http://support.Microsoft.com/kb/900936

  See also:

  Try to reset the Windows Update components

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  See also:

  You may receive an error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site

  http://support.Microsoft.com/kb/883821

• error code 2000-0123

  my friend has an inspiron she bought there is display the following error a year and a half

  Info: the configuration for an item in the object is invalid in the boot configuration data store.

  Hi Richard,

  1. are you able to boot into normal mode after receiving the error message?

  2. when the problem started?

  3. did you of recent changes on the system?

  You can consult the following link of Dell support for the difficulty with the error code: 2000-0123 and checkif it helps.

  Pre Boot System Assessment (PSA) Diagnostics and Error Codes for Dell computers

  Hope this information is useful.

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• error code to remove the Dell Wireless LAN card utility

  I'm moving from VISTA to Windows 7 and I can't remove the utility of LOCAL network error Dell Wireless card, I couldn't remove the control panel nor.

  Hi orionhunter,

  (a) what is the error code? Error code would help us a lot to identify the problem and provide specific troubleshooting steps to solve the problem.

  Try to remove the card Wifi from Dell in the clean boot state .

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
  
  Follow the steps below to put your computer in a clean boot state:

  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  1. sign the computer by using an account with administrator rights.

  2. click on the Start button, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  
  Note following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  5. click OK and then click on restart.

  Now the system is in a clean boot state.

  Check the link to learn more about the clean boot below:
  http://support.Microsoft.com/kb/929135

  Restart the computer in normal mode when you are finished troubleshooting.

  1. click the Start button, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Similar question:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/b712a0df-58Fe-4592-afd7-42a2b1ef5a33

• I bought the original Gears of War for PC. I downloaded it, but I get an error code: 800700EA.

  I bought gears of war 1 for pc and I downloaded it but I get error Code: 800700EA when I try to install. Can someone help me?

  original title: I need help to install gears of war for pc 1.

  Hello

  1 did you change on your computer before this problem?

  2. you receive an error message with the error code?

  3. is there a specific problem installing with this program?

  4. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can read the article and then check.

  Microsoft games: InstallShield Error Messages

  http://support.Microsoft.com/kb/910816

  See also:

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

• Card LaCie esata PCI card on windows 2003 server Dell poweredge T410 error code 10

  Hi guys, I am trying to install a new card Lacie esata PCI card (http://www.lacie.com/products/product.htm?pid=11217) on windows server 2003 on Dell poweredge T410. Windows detects the card and install the driver, but then, it shows an error code 10 "device Can not not started. I tried the update, uninstall, reinstall, adding Lacie driver CD through the "Hardware Wizard', chaning PCI card slot by 4 to 1. But nothing has worked. So please let me know if you think that there is a fix for this solution. Thank you

  Hi Rlap,

  The question you have posted is related to Windows Server and would be better suited to the TechNet Discussion groups. Please visit the link below to find a community that will provide the support you want.

  Windows Server Forums: http://social.technet.Microsoft.com/forums/en/winservergen/threads

• Error code: Trying 80072F8F update windows after fresh install - Dell Vostro 1510 - (Windows 7 x 64 PRO)

  Hello, I'm trying to update windows after installation and I get error code 80072F8F.  After looking for other pages, I checked my BIOS date and time are correct and Windows as well.

  Laptop: Dell VOSTRO 1510
  Windows 7 x 64 PRO

  I already activated Windows (silly me to check everything actually works) and I need a solution as soon as POSSIBLE.

  I needed Windows update to try and fix a number display adapter (card intel not giving not external display resolutions)- but that's another question.

  I hope that there is a fix out there somewhere in the ether.

  -Giant_Cheeseman

  No anti-virus installed at the present time, no anti-spyware, no firewall.

  Repost: What were the problems you are experiencing that you thought that a "new facility" could solve?

  The foregoing notwithstanding, and since you neglected to install an antivirus application...

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have on my dell minni 0E00-0003 error code 9 and I can't download my XP flash drive

  I have on my dell minni 0E00-0003 error code 9 and I can't download my new flashdrive XP - How can I reinstall my XP flashdrive when my computer is damaged?

  Hi shellybutterf,

  ·         Are you able to boot to the desktop?

  ·         Have what troubleshooting measures you tried?

  Follow these methods.

  Method 1: Disconnect all external devices and try to start the computer.

  Method 2: Start the computer to know last good configuration.

  Method 3: Follow the steps in the article.

  Computer stops responding with a black screen when you start Windows XP

  Method 4: Follow the steps in the article to resolve the problem of USB.

  Advanced troubleshooting tips for General USB for Windows XP problems

• I get a box of upcoming error code, IE error 1706, Dell Resource CD. Like any body other hade the same problem, can help you, thank you.

  Several times when downloading a program on internet, a box appears that says put in the CD-ROM of resources Dell error code 1716.

  I put in my windows CD, but I have no idea what I'm looking for for.can any body help. Thank you.

  Hi Johnokey3090,

  ·         Who is the service pack installed on your computer?

  Follow the suggestions below for a possible solution:

   

  Method 1: You can install the latest version of windows install and check the results.

  You can download the latest version from the link below:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Method 2: I suggest you unregister and re-register the Windows Installer service, and see if the problem persists.

  To do this, follow these steps:

  a. click Start, click run. Then in the Open box, type msiexec /unreg, and then click OK.

  b. When this process is complete, click Startand then click run.

  (c) in the Open box, type msiexec/regserver, and then click OK.

  Hope this information helps.