ORing the arbitration in a cluster to write Net Multi ID

Similar Questions

• Properties of the component of modifing Cluster on sbRIO? No node "to more specific class?

  Hello

  I designed a fairly large RT application.  Our structure is to have our main vi RT with several large groups which pass into subvis that modify the components of the pole passed through its reference. (Easy) In addition, we have to change the properties of the cluster component as well. Other examples, to change the properties of a cluster of referral component, we do:

  (1) obtain controls [] property of the cluster

  (2) of the index in the [] for the component Control

  (3) class "to more specific" use with the exact type of the component

  (4) fix a property node to access the property of desirec

  It worked well except that we are currently making a sbRIO system. All the 'to more specific class' now are broken with the error message that this node "only is not supported on the current target".

  I spoke to a representative of OR who says that 'To more specific class' is NOT supported on the real-time hardware. If this is the case, how one is changing the properties of component a cluster without using the node "to more specific class?

  A simple example is attached. It shows a simple cluster of two components that must have their properties changed. It works fine on a material in real time (such as a host PC). It breaks on our sbRIO.

  Yet once how one change properties of a component cluster on a system in real-time like sbRIO?

  We use LabView 8.6.1 on a sbRIO 9642.

  -Paul

  

  I installed LabView 2009 today and here it is--the "to more specific class" node is now permitted on a real-time target. Nothing in the documentation indicates that it but I'm not complaining. You can now change the ownership of a cluster component in a subvi on a real-time target. Thanks to which it is fixed that!

• How can I browse the labels of a cluster as if they were listed?

  It is possible to loop through the labels of a cluster like this:

  

  However, it forces me to manually maintain the chains in the structure of the case.

  Is there a way to get these labels of cluster in the structure of the case at the time of the design, similar to the use of an enum?  They're right there!

  Unfortunately not.

  You can think to use a different data structure.  If they are all the same type of data, perhaps a table works best for you.

  Another method would be to use the attributes of variant to hold the items of your cluster.  You can search for items in a variant of name it.

• Changing a property of an indicator of the chain in a cluster with a sub - VI

  I know that the issue of the update of an indicator on a first level VI of a Subvi has been requested before on the discussion Forum, but my question is slightly different, because I want to update the property of an indicator, not necessarily its value.

  In my first level VI, I have a group that contains some indicators of the chain.  The cluster is a typedef.

  

  I want to change the background color of the indicator for red or green of my sub - VI string so that it looks like this:

  

  Creating a reference to the cluster and move to the Subvi do not seem to work.  I'm not able to see the Text.BGColor property to change the background color of the string indicators:

  

  It seems that the creation of a reference to a string indicator and switch to the Subvi might work like this:

  

  Is there a way to better/more elegant to do this? Do I have to create a reference of string for each string in my cluster and send it to my sub - VI?

  I've messed around with global variables, but not luck.

  Plese help.

  You have the right idea.  The cluster reference has a property called [orders].  Which returns an array of references to all the controls in your cluster.  Indexing of those who have properties BGColor, that you need.

• How can I get the size of a Cluster in bytes?

  I want to get the value of a cluster size, and I found the function "Get variant attribute" I think that to do this,

  but I can't find in the documentation http://zone.ni.com/reference/en-XX/help/371361D-01/glang/get_variant_attribute/

  Anyone would provide the values of the attribute name that can receive?

  And it's right to get this function I need or there is another way?

  Hi Marco,.

  GetVariantAttribute may not give you the size of a cluster - it will just give you the a variant attributes!

  You can create attributes with any name (but a non-empty string)...

  Why should you get the size of a cluster?

  Perhaps you could serialize to a string and get the length of the string. Or type in a table of U8 conversion and get the arraysize...

• Which of the following functions assembles CLuster elements by their label opportunity

  Hello

  Reviews online sample DRESSED a question appears as follows:

  Which of the following functions assembles CLuster elements by their label opportunity

  a bundle

  b unbundling

  c unbundling by name

  d offers grouped by name

  My question is:

  Obviously, the answer is a or d but d cannot assemble a cluster while a do not group them by their property tags.

  Any ideas?

  Thank you

  Sean

  The answer is (a) - who ride using the labels, as shown here:

  

• Access denied make sure that the drive is not full or write protected

  Original title: when insert my USB it is detected but when I try to copy a file from the PC to the USB it shows an error message. Access denied make sure that the drive is not full or write protected
  When insert my USB it is detected but when I try to copy a file from the PC to the USB it shows an error message. Access denied make sure that the drive is not full or write protected

  Hello

  Thanks for posting the question in the Microsoft Community Forum.

  Will guide us in the question.

  You can try the steps and check if you are able to copy a file from computer to the USB key.

  Method 1:
  You can try to copy the file on computer for USB in SafeMode.
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Method 2:
  You can try the steps in the article to (KB) knowledge base and check if it helps:
  Error message when you try to delete a file in Windows XP: "access denied".
  http://support.Microsoft.com/kb/298345

  Reference link:

  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/?kbid=308421

  Hope that the information provided is useful.

  If you need further assistance, please answer and we will be happy to help you.

• While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Original title: When I'm trying to delete file MPEG4, is not deletion. How can I delete file MPEG4?

  While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Hello
   
  Method 1: Ownership of the file and then try to delete and see if that helps.
  Reference:
  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421
  Method 2:
   
  Error message when you try to delete a file in Windows XP: "access denied".

  http://support.Microsoft.com/kb/298345

• I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Original title: remove unnecessary files

  I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Ditto for PCFIX.exe.

  How can I remove these and clean unnecessary files? Thank you.

  Hello

  1. how exactly you are trying to remove it?
  2 have you connected the administrator account?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\ 

  Reference: How is ownership of a file or a folder in Windows XP

• The drive - to enable or disable write protection

  The drive - to enable or disable write protection?

  Hello

   

  You can remove or add protection from writing to your hard drive using the method below:

  a. open the start menu and in the search bar type regeditand press to enter. The Registry Editor opens.

  Navigate to the following location:

  b. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

  Note: If the StorageDevicePolicies registry key does not exist, you must create it manually.

  c. double-click the key Write Protect in the right window and set the value to 0 for OFF , and value = 1 .

  d. data area, and then press OK button

  e. restart your computer and test.

   

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP
  http://support.Microsoft.com/kb/322756/

   

  Note: You can view the documentation for the hard drive for the parameters of the write protection.

  Hope this information is useful.

• Failed to get component of the arbitrator

  When I click on Viewer call in the warehouse of cisco unity tool, I get the following error... Failed to get component of the arbitrator... any thoughts

  The connected account is associated with any subscriber?

  Try UnityInstall

• asphalt 8, I installed on my windows 8 core i3 laptop but the game won't start, he writes that the loading and it never finishes loading

  asphalt 8, I installed on my windows 8 core i3 laptop but the game won't start, he writes that the loading and it never finishes loading

  Hi Samuel,.

  To solve the problem with the application you have installed, you can run the troubleshooter for Windows app.

  Let us know if you need more.

• Diffrence between the tablespace is ONLINE and READ WRITE?

  Hi all

  I'm very confused on the tablespace is ONLINE and READ WRITE?

  Some say that if the tablespace is online, this means that its READ WRITE and when its offline then its READ-only.

  So, what is the difference between them:

  ALTER TABLESPACE offline tablespacename; -> done mean READ only now?

  ALTER TABLESPACE tablespacename online; -> is it means its READ WRITE now?

  If Yes, then what is the use of the following command if above 2 commands? :

  ALTER TABLESPACE tablespacename [READ ONLY |] READING WRITING];

  Kind regards

  Confused Ritu

  In addition, when the tablespace is offline, objects belonging to those who are not available for use to users. You wouldn't be able to query for objects in a tablespace offline.

  When the tablespace is read only - no write operation cannot be performed i.e. etc. INSERT/UPDATE/DEL. Oracle says that read-only tablespaces provides a way to protect the historical data so that users cannot modify it. You can drop objects, such as tables or indexes, to a tablespace read-only, but you can't create or modify objects in a tablespace read only

  In order to bring a tablespace OFFLINE to ONLINE - so that it is available to users, you must "ALTER TABLESPACE online tablespacename" command. A tablespace online can be READ ONLY or READ WRITE mode.

• "Mem.Usage.Average" against the total aggregate of cluster host memory

  Please see the attachment for the whole story.

  Please give me a sanity check on this. I used the "Mem.Usage.Average" as a % against allocated VM MemoryMB. The sum of these calculations escaped by far the actual calculations of the vCenter % memory-based. So, I changed my calculations that you see in the worksheet to use the 'Mem.Usage.Average' against the total aggregate available on all hosts in the cluster. This amount came to less than 1% of my calculations based on vCenter GUI. Am I right against the total aggregate memory cluster host instead of against VM memory assigned using 'Mem.Usage.Average '? Thxs-

  

  SDK is not clear on "total configured memory available or". https://www.VMware.com/support/developer/converter-SDK/conv55_apireference/memory_counters.html Part description of memory used as a percentage of the total configured or available memory.

  
  

  $start = (get-Date). AddDays(-5)

  Get-cluster-location ActualClusterName | Get - VM | Where {$_.} PowerState - eq "Receptor"} @{N = "Mem.Usage.Average"; E = {[Math]: round ((($_ |))} Get-Stat - Stat mem.usage.average - start $start - $finish - IntervalMins 1800 - MaxSamples finishing (250) | Measure - Object - average value). Average), 2)}}"

  
  

  Cluster is 6 hosts with 128G per host for total of 768G (786432 MB of RAM), there are 118 powered on virtual machines

  
  

  
  

  for me the SDK says that percentage reflects the relationship between the memory 'active' in the virtual machine against the memory configured for the virtual machine.

  A configured with 8 GB of memory virtual computer that has 'use' of 25% is actively using 2 GB of memory.

  

  I think that your numbers you get for VMS are biased because of the great period of time during which you take the average (see previous answer).

  You can cross-check the mem.usage.average with the mem.active.average.

  In the following code, I calculate the different 2 meters actual memory used by the virtual machine.

  $clusterName = "mycluster.

  $stat = 'mem.usage.average ','mem.active.average '.

  $vm = get - Cluster - name $clusterName | Get - VM | where {$_.} PowerState - eq "Receptor"}

  $stats = get-Stat-entity $vm - Stat $stat - Realtime - MaxSamples 1

  $stats | Group-object - property {$_.} @entity.name} | %{

  [PSCustomObject] @ {}

  VM = $_. Group [0]. @entity.name

  MemoryMB = $_. Group [0]. Entity.MemoryMB

  MemUsagePerc = $_. Group | where {$_.} MetricId - eq "mem.usage.average"} | Select - ExpandProperty value

  MemUsageMB = [int]($_.) Group [0]. Entity.MemoryMB * ($_.) Group | where {$_.} MetricId - eq "mem.usage.average"}). Value) / 100

  MemActiveMB = ($_.) Group | where {$_.} MetricId - eq "mem.active.average"} | Select - ExpandProperty Value) / 1 KB

  }

  }

  The result shows a specific virtual machine, these two numbers are close enough to be considered the same imho.

  That they should be in fact, the mem.usage.average is derived from the mem.active.average.

  

• I need to download photoshop test with the support of middele is to write in Arabic

  I need to download photoshop test with the support of middele is to write in Arabic

  Hello

  Please see Photo editing software | Download the free trial version Photoshop CC

  Hope that helps!

  Kind regards

  Sheena