OS command to several hosts of licensing issue of library work

Similar Questions

• Host esx license problem substituting

  Hi all

  I have a problem when I try to replace it by an esx host.

  We have a total of 20 under license issued, 19 in use (9 esx host have 2 cpu, 1 esx host has 1 cpu).

  To add a new host esx (I'll call esx11), I had to unplug and remove a host of VIC (I'll call esx01).

  The result is that esx11 is "unlicensed" and if I make a 'survey of status' using license server tools (FYI License Server is installed on Virtual Center), it always reports as licensed hospitality that I disconnected (esx01).

  Any ideas?

  Thank you in advance.

  PIO Massaro

  just because you disconnect will not remove the license.  You must go to the ESX host, under the configuration tab and the features under license.  Change your license source.

• Audio and licensing issues

  I recorded a clip long using Sony PMW - EX1 in SD on location 1 hour and 50 minutes, exported the m2t format on external hard drive file, then imported to the pre Pro CS3 on my computer for editing.  I loaded the clip in the timeline to start to change and the first 30 minutes of audio played normally, then it started during the early.  The last 30 minutes. the audio was lost.  1 hours and 50 minutes video was normal.  There is nothing wrong with the clip-it normally plays in Nero Show and plays normally in place.  Has happened to me before and I Redid the clip and everything was fine.  This cannot be redone. .

  I tried to do a new preferences file No. aid.  I then reinstalled Pre Pro-aucune help.  I tried to reload the clip several times-no help.  I reinstalled Pre Pro new-oops-now my license has stopped working.  I tried several times to phone support, and I tried the web support.  Phone support said they'd call me back - they do not have.  Web site offered for download and following the steps of an article of its base of knowledge (KB401528).  I did and it did not work.  When I went back to article the message says that this article does not exist.  Now, there is a problem with the site that will not let me submit the messages they disappear and are not received.  It seems that all modes of communication with technical support are blocked.

  I'm really frustrated with Adobe Support.  I see a letter explaining there are problems with tech support-not a joke.  Anyone out there have any suggestions?  It is a commercial project with very quickly approaching - any suggestions would be appreciated.  First issue is license issue resolved because Pre Pro will not open.  Also need to fix audio problem.  Thanks - Dorian

  The audio problem is weird. Perhaps it is caused by the lack of space on your C: drive, but he is just guessing. Make sure to leave enough time PR conform the audio before you start editing.

  

• W2K8 R2 Licensing Issue: passes during the migration of parallel hardware

  We have a very old application server run on W2K8 R2 stand-alone (no advertising).  We decide to migrate the server to new hardware.

  Freshly install us the operating system, create user accounts, and install the application on the new hardware.  To play safe, we intend to have a parallel run for 3-4 weeks.

  Our question is: will there be a problem when we apply the OS on the new server license?  Where could I find more resources on licensing issues associated with these migrations?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Cannot play DVD movies on due to licensing issues.

  My friend built me a computer and installed a Dvd inside player.  Unfortunately, when I put in the DVD videos, I can't view because of licensing issues.  I know that most other DVD readers can read the videos without these problems.  I think that my dvd drive is an ATAPI iHAS120 6.  Help, please.

  This is the message I get when I try to play the DVD.  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I think that these DVDs are protected by DRM, but they played on my sister's laptop.

  ====================================
  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following freeware
  media players:

  VLC Media Player
  http://www.videolan.org/

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of the
  Following codec packs.

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Deploy multiple virtual machines on several hosts evenly?

  Hello people!

  I wrote a small script to deploy many virtual machines on several hosts at random.

  But I would rather deploy a virtual machine to each host in a table and then start over again until the number of virtual machines to deploy exhausted.  Distribution of the burden of deployment as evenly as possible.

  Anyone have a suggestion?  Example of nested loops?

  

  PowerShell beginner, here.

  Thank you

  romatlo

  One way to do this is with the modulo operator (%), something like this

  $numVMs = 11

  $tgtEsx = get-Cluster "Westcreek | Get-VMHost-name z420 *.

  1.. $numVMs | %{

  [New-VM-name 'Test $($_)' $tgtEsx[$_%$tgtEsx.Count - VMHost]

  }

• Adding a new license for a new Member, but may not use programs. Saying licensing issues... any advice?

  Adding a new license for a new Member, but may not use programs. Saying licensing issues... any advice?

  You use the Enterprise Dashboard?

  If so

  1. ensure that they use the correct ID type. So if they have been added to the dashboard with Enterprise or federated ID to ensure they do not use the Adobe ID or vice versa.

  2. bring to sign out and sign back in to check their eligibility.

  3. If the problem persists, then try this:

  The opm.db file contains the login user cached information and delete this file is a useful troubleshooting step. Once deleted a fresh file will be automatically created when you start creative cloud and reconnect.

  1. Close the creative cloud application.
  2. Navigate to the OOBE folder.
     Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
     Mac OS: /Users/ [user name] / folder/Library/Application Support / Adobe / OOBE
  3. Delete the file opm.db.
  4. Launch the creative cloud.

• New host ESXi licensing

  Hi guys,.

  I am currently working on a workflow for the provision of new hosts ESXi from scratch. Unfortunately, I glued on the new VMWare licensing to a host. I wanted to do this with a script element:

  Entry:

  Host (VC: HostSystem)

  License (String)

  Code:

  Host.configManager. licenseManager. licenseAssignmentManager.updateAssignedLicense (Host.id, license, null);

  Unfortunately, this returns an error indicating licenseManager is null.

  Anyone know how to set the new licenseManager on the host or license in another way?

  Thank you

  Kamil

  OK, I got it myself. Instead of approaching licenseManager thanks Host.configManager I used instead of the VC:SdkConnection variable.

  Entry:

  Host (VC:HostSystem)

  SDK (VC:SdkConnection)

  LicenseKey (String)

  Code:

  SDK.licenseManager.licenseAssignmentManager.updateAssignedLicense (Host.id, LicenseKey, null);

  This works perfectly!

• Licensing issues when I go to re - install on a new machine?

  I had Illustrator CS5 installed on 2 machines (1 license). A machine that crashed, obviously before, I managed to uninstall officially. Did I meet licensing issues when I go to re - install on a new machine?

  Yes, you are noit be able to activate the new installation until you disable the one you had.  Uninstallation is not necessary but disabling is.  You can contact Adobe support using cat and they can manage the deactivation of inaccessible installation.

  Serial number and activation support (non - CC) chat

  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• When updating licensing issues?

  I recently installed an update of adobe 13 items, when I restarted computer I only had the trial version. When I tried to enter the activation code tells me that I have exceeded the number of licenses. How to work around this problem and avoid in the future?

  Thank you

  You will need to contact Adobe support via chat and ask them to reset your activations.  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

  You are assigned to two current activations per single-user license - you can disable and re-enable as needed, but you must remember that you only have two to work with...  If you have installed more than twice without turning off, you will get the notice that you indicate that you have seen.  To avoid it in the future remember to turn it off before uninstall/reinstall, if you are capable of is.  When a system goes down you will no longer be this possibility.  But if you are knowingly disabling/uninstalling software Adobe then make sure to disable everything first.  To turn off, you normally just open a program and choose Help-> Deactivate.

  If you do not uninstall/reinstall into that so I can't explain why you have the message you did.

• Host process for windows has stopped working

  Today, I got an error with no activity on the computer. "host process for windows services stopped working. Immediately after this message when I clicked on the Panel of the window was empty. Also, my printer stopped working. I checked the day windows journal and noticed that the last 3 weeks of auto updates had failed for some reason any. I have tried almost everything on the site of MIcrosoft to fix this problem without success. I even tried to do manual downloads of Vista SP2 but this faills and.

  Any advice?

  Hello

  Try to install an update of:
  http://support.Microsoft.com/default.aspx/kb/940520

  then run Windows update.

  I hope that helps!

• "Audio Windows has stopped working" and "host process for windows services stopped working.

  Hello. I recently had to reinstall windows vista on my computer. Everything works well except that I continue to have problems with the audio. When I play youtube videos or to make Skype calls, that the sound disappears and I get the message "Windows Audio has stopped working" immediately followed by the message "host process for windows services stopped working." I remember having this problem in the past, every time that I had to restore the operating system, but I don't remember what I did to remedy. I went to the history of my problem and it's certainly a problem with Windows Audio. What can I do?

  Hello

  1. The problem only affects Skype and Youtube videos?
  2. The sound works fine on the computer in other circumstances?
  3. You reinstall the audio drivers after reinstalling Windows?

  Try the methods provided and see if it helps to solve the problem.

  Method 1:
  Check out the link and follow the steps.
  
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  Method 2:
  You can also visit this link and follow the steps in the article.
  
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• Error at startup of Vista: "host process for Windows services stopped working and was closed".

  Original title: problem with Vista

  There is this error message whenever he starts to the top and pop up at any time.

  "Host process for Windows services stopped working and was closed".

  "a problem caused the application to stop working correctly.

  How should I do? and my lower start bar turned white based

  Hello KenricLow,

  Try this to see if you can connect.
  Boot to safe mode.

  To access Safe Mode:
  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  (b) select an option when the Windows Advanced Options menu appears, and press ENTER.
  (c) when the boot menu appears again, and the words "Safe Mode" appear in blue at the bottom, select the installation that you want to start, and then press ENTER.

  Of in safe mode, type msconfig in the start in the start menu search box and press return. Then on the Startup tab, uncheck the box any reference to the verisign/authentec software. Then, go to the services tab, sort the columns by manufacturer, then uncheck all references to Verisign. Then click ok and restart in normal mode.

  If please reply back and let us know if that helped to turn out to get rid of your error message.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Host process for Windows Services stopped working and was closed & Windows must now restart because the DCOM Server process Launcher service terminated unexpectely

  my computer keeps stopping and restarting itself. I get the same messages of 2 error: host process for Windows Services stopped working and was closed and; Windows must now restart because the DCOM Server process Launcher service terminated unexpectely. How can I fix? I used the norton support, run analyses of many, nothing has helped.

  None of the above works though... I didn't know by another forum to download Hitman 3.5 http://www.surfright.nl/en/downloads/home that he got rid of a virus that norton, Norton 360 and Malwarebytes antivirus support could not. I had no problem since :)

• How can I restore host windows Rundll32 processes that stopped working?

  Original title: the host process Rundll32 Windows

  How can I restore host windows Rundll32 processes that stopped working?

  Hello

  This is probably the result of malware then do a very thorough check and when the
  the system is clean see the following message to remove this error.

  If you need search malware here's my recommendations - they will allow you to do a thorough check and removal without ending up with a load of spyware programs running resident who can cause as many questions as the malware and may be more difficult to detect the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy to detect malicious software is often accompanied by a much harder to detect and remove the payload. So its best to be now too thorough than paying the high price later. Check with them to an extreme exaggeration, and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the in the Windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN it will show infections in the report after you run - if it will not run change tdsskiller.exe to tdsskiller.com name. If she finds something or not does not mean not, communicate with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and use scanners online and other methods.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  AdwCleaner
  http://www.bleepingcomputer.com/download/adwcleaner/
  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans, rootkits, etc.) that have infected your computer despite all security measures you have taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Scan online ESET
  http://www.eset.com/onlinescan/

  Scan Kaspersky online
  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">