OS not found on the c: drive, cannot start windows

Today, I tried to restart my laptop and all of a sudden, they won't let me restart. It keep telling me that I can't or my hard drive is too small. and I tried all the option, even tried to restore my c: drive, but then he told me that I have to choose: full system restore:.

However, full system restore wasn't in one of my options and after that I dropped to restart the laptop want to just start over my windows, but then I can't do more because in the Windows error recovery just an option that is recovery tools, it doesn't have the choice as boot the system normally.

So now I can't enter to windows or restart my computer, how do I get into my windows again? Help, please. :(

Hello


1. What is the exact error message you get?

Method 1:
I suggest you try the steps from the following link

Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
http://support.Microsoft.com/kb/934540

Method 2: go to the BIOS (Basic Input Output system) Setup, & change the switch setting between AHCI (Advanced Host Controller Interface) and IDE (Integrated Drive Electronics), SATA (Serial Advanced Technology Attachment) and the drive controller is restarted. If it solves your problem, the driver for the HARD disk (HDD) is corrupted.

IMPORTANT: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

Method 3: Your hard drive is damaged to the point that it cannot even recognize that Vista has been installed on it. If you have a Windows Vista installation disc, you can try running chkdsk to fix the HARD disk; you need to restart (boot) your computer using the installation disc.

a. Insert the installation disc and restart your computer.
b. click the Start button, click the arrow next to the button lock and then click on restart.
c. If prompted, press any key to start Windows from the installation disc.

Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see check the link for the BIOS: frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/BIOS-frequently-asked-questions

d. choose your language settings, and then click Next.
e. click on repair your computer.
f. Select the operating system you want to repair, and then click Next.
g. in the System Recovery Options menu, click command prompt
h. type chkdsk /f / r and press ENTER.

Important:
when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

This will perform a disk check and perhaps recover the system. CHKDSK can repair problems related to bad sectors, lost clusters, reticulate files and directory errors

 

Method 4: I suggest you run /ScanOs, /FixBoot commands from following link:

How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
http://support.Microsoft.com/kb/927392

Tags: Windows

Similar Questions

  • my computer won't past the splash screen. She claims system not found, check the cable. I have windows on my Acer laptop base.

    After I press start, the splash screen appears briefly, then a black screen stating:
    Pre-boot EXecution Environment (PXE) v2.1
    PXE - E61:Media test failure, check cable
    PXE - MOF: exit ROM PXE.
    Operating system not found

    ·       Try to remove your hard drive and unplug the cable.  Then re - attach the cable and re - install the HDD.  Somehow, the cable may have come loose and it may solve the problem.  If this does not work, follow these steps:

    Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

    If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

    If this does not resolve the problem, try the following:

    To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

    1. put the Windows Vista installation disc in the disc drive, and then start the computer.

    2. press a key when you are prompted.

    3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

    4. click on repair your computer.

    5. click on the operating system that you want to repair, and then click Next.

    6. in the System Recovery Options dialog box, click command prompt.

    7. type Bootrec.exe, and then press ENTER.


    Note
    If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

    ·        bcdedit/export C:\BCD_Backup

    ·        c:

    ·        Boot CD

    ·        BCD attrib s h - r

    ·        Ren c:\boot\bcd BCD.old

    ·        Bootrec /RebuildBcd

    Good luck and I hope this helps!

    Lorien - a - MCSE/MCSA/network + / A +.

  • This drive cannot start Windows. ensure that the drive controller is enabled in the bios

    so I built a new rig

    AMD fx 6300

    ASUS m5a78musb3

    WD caviar green 1 TB hard drive

    during the installation of windows 8 m getting this error "Windows is unable to start in this hard drive. activate the disk controller in the bios bla bla...

    I googled a lot... believe me!  changed sata controller ><->ide, ahci vice versa tried sata ports... disabled the uefi boot... allow a smart tracking.

    I tried with a different hard drive (WD caviar blue 500 GB) in the present, the rigging and it worked without hassle. Looks like the hard drive is damaged? any suggestions?

    I tried to format the drive with diskpart, but I keep getting i/o errors related to... I also tried with ubuntu its not appearing is not in the installation?

    In short, I can't start/format/partition this hard drive.

    Hi Rupesh,

    I'm sorry to inform drivers that is faulty, because you have built this computer, you can contact the store of the retailer where you bought the HARD drive or contact the drive manufacturer's Web site.

  • Full XP install in the virtual drive cannot start!

    My company has limited Virtual PC Windows XP mode.  They said, however, that I could do a full install of the operating system on a virtual PC.  I downloaded an .iso image of Windows XP Professional SP3, but when I point the virtual disk to the .iso to boot image file, I get the error message: "PXE-E53: no boot file received.

    Hello

    Thanks for the post. I appreciate that you try to install Windows XP on a virtual disk.

    You cannot directly use the ISO image to install the operating system, you must burn it to a disk and then use the CD to install. You can use your favorite search engine to look for a tool that will allow you to burn the ISO to a CD.

    WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

    I have a few problems on my laptop [Acer 3810 t]

    -The first problem
    My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

    -The second problem
    because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

    -The third problem
    So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

    What is the error code that you got with blue screen?

    I think that there is a problem with your drive HARD check that by contacting acer...

  • I get the error code 1706 - valid no source is found for the product my Hub. Windows install cannot continue.

    I get a pop up saying error 1706 that valid no source is not found for the product my hub. Windows install cannot continue.  Also "the feature you are trying to use is on a nework resourse which is not available."

    Can someone tell me what to do and what is the problem

    Thank you

    Hi Traceyjane,

    (1) when exactly it happens?

    (2) do you use the computer as an administrator?

    (3) what is the number of brand and model of your terminal?

    If you try to install the software for your hub, make sure that you install the correct package for your computer.

    Step 1: Try to install the program as administrator right click on the installation program files and select run as administrator , click continue if you are prompted to confirm.

    Just check the items below that addresses a similar issue

    The feature you are trying to use is on an unavailable network resource
    http://support.Microsoft.com/kb/828376

    You receive an "error 1706. Valid any source not found for the product

    http://support.Microsoft.com/kb/253768

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Age of Empire 3. error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the CAB file ' Disk3C ~ 1.cab '.

    I recently bought Age of Empires 3 and tried to install it.  I get to drive three - until almost the end - when I'm "error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the file ' Disk3C ~ 1.cab '. This may indicate a network error and the error reading CD-ROM, or a problem with this package. "The installation continues until the end of the progress bar, but it reads"Rolling Back Action"for about fifteen seconds before I got a"feature transfer error", which reads" error:-1603 Fatal error during installation. " Consult the help of Windows Installer (Msi.chm) or MSDN for more information. "Then, the Setup program stops and tells me that the game failed to install and my system has not changed.  I cleaned the disk and it is in good condition. My computer also meets all the requirements for the game. I looked everywhere for an answer, but so far none has solved the problem. I tried to install it without the firewall and antivirus software running, in addition to install in safe mode.  Any suggestions?

    Hi void 1337,

    Follow the suggestions below for a possible solution:

    Method 1: I suggest that you put the computer to boot and then try to install the game and check to see if it helps:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2: You can also follow the link and check if it solves the problem:

     

    Error message when you install a Microsoft game or a mapping program

    http://support.Microsoft.com/kb/258496

    You can also view the article mentioned below to learn more:

    Microsoft games: InstallShield Error Messages

    http://support.Microsoft.com/kb/910816

    If the above mentioned methods do not work, then post your request in the age of the forum of the empire for further assistance:

    http://Forum.AgeCommunity.com/

     

    Let us know if that helps.

  • Cannot install KB982331 KB981715 & KB982312 "the expected version of the product is not found on the system.

    I have the Compatibility Pack installed so that I can open .docx files of type 2007 etc.  Apparently the updates of Windows 'think' I have Office 2007 if updates following KB982331, KB981715 and KB982312 are queued to be installed, but they are unable to install it because I have not Office 2007 is installed.

    When I try to install the tool in stand-alone via the following links

    KB982331

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en

    KB981715

    http://support.Microsoft.com/kb/981715 and select download package now.

    KB982312

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=6deb4fb0-CBFC-40DF-8F62-35fa1db0e167&displaylang=en

    I get an error correctly indicating that "the expected version of the product is not found on the system.  So they will never install successfully but Windows Update won't jump that updates are not necessary.

    Does anyone know how to remove these updates to install?

    Thank you

    Chuck

    Support of Microsoft's solution was to uninstall the Office 2007 Compatibility Pack.   I chose to ignore the updates and keep the ability to view Office 2007 extensions.

    In addition, contact the support does not count as a solution, especially when the problem is not resolved by the project "fix."

  • View CD can't mistake of player Director, was not found in the object #getPropRef, Script error. Continue?, yes no

    OT: Error player Director, not found in the object #getPropRef, Script error. Continue?, Yes No. nursing student cannot run his CD CD practice to work on other laptops. but not on it!

    Nursing Student cannot carry out its practice CD which comes with Prentice Hall Nursing book: "medical and nursing care 2nd edition, comments & justifications surgical."  CD works on PC and a laptop running Windows XP, Vista and Windows 7 and on an iMac; but not on it!  She has a Toshiba laptop with Windows Vista Home Premium and it just doesn't work!  My wife has lent her one of its laptops with Windows Vista, but the CD works fine.  What is the problem? I called Prentice Hall and got no help from them!  They said it was a computer problem.  This student is an exchange student and she would really any help.  I tried to clean the system and even tried the Optimizer5.2 perfect for the correction of errors in Script, but it didn't work.  Help please!  My only recourse is to backup all files and wipe the disk clean and start again to do a reinstall of all applications.  Any other ideas?  She had the phone since 2005 and the hard drive has only about 30% free space left on 147 GB.

    Hello cobblestone47,

    1. What is the version of the steering drive you use on your computer?

    2. the other users who are able to play the CD using the Director or shockwave player player is

    Player de Macromedia Director is also known as the Shockwave Player. I suggest that you uninstall the Director player and install the latest version of Shockwave player, and check if you have the same problem.

    You can follow the link below to download and install the latest version of Shockwave player:

    http://get.Adobe.com/Shockwave/

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • "the 495 ordinal not found in the dynamic link library urlmon.dll" produces 10 times every reboot

    I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.

    I thought somehow it may relate to a recent update that has been accepted for Skype on my system.  So I uninstalled Skype.  Attempts to reinstall Skype have failed.  the installed app, but I cannot arrive at a login screen.  Instead of the normal Skype window, I have just the bottom of loading in a web browser.

    I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):

    "Method 1:

    To resolve this problem in Internet Explorer, follow these steps:

    a. Quit all programs that are running.

    b. Click Start and then click Run.

    c. type regsvr32 urlmon.dll, and then click OK.

    d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.

    ('DllRegisterServer in urlmon.dll' received successful)

    If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):

    ·         Shdocvw.dll (failed)

    ·         Actxprxy.dll (failed)

    ·         Oleaut32.dll (failed)

    ·         Mshtml.dll (received no response)

    ·         Browseui.dll (failed)

    ·         Shell32.dll (managed)

    Method (step 2):

    I suggest you to start in safe mode and test the question.

    Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

    Method (step 3):

    I suggest you perform a SFC Scan and check if it helps.

    The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833

    (SFC Scan completed successfully)

    Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"

    DavidMCandy suggested the user a list of the URLMON. Dll on the system.  I did as well.  See the file on my Onedrive to

    http://1drv.Ms/11PQ3dm

    I hope this will help you to find me a solution to my problem.

    First of all lets run a startup repair.

    This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.

    After return from the logs generated.

    Startup Repair

    If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

    In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

    Select the Startup Repair tool.

    Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

    To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

    Select command prompt.

    Type

    type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

     

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     
    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --
  • How to extend my C drive volume in Windows 7, so that the disc I want to merge in drive C is not adjacent to the C drive, please help

    How to extend my C drive volume in Windows 7, so that the disc I want to merge in drive C is not adjacent to the C drive, please help

    Jackin salvation,

    Welcome to the Microsoft Answers community.

    When resizing of volumes in Windows7, you must be aware of the following criteria:

    • Only you have the possibility to reduce or enlarge NTFS or RAW (unformatted) partition using Windows 7 tools.
    • When you shrink a partition, files not movable as a page file or a shadow storage area are not resettled. This is why you cannot reduce the size of the Windows beyond volume where these types of files. If you need to reduce the volume, you will need to remove, move or delete the page file or the shadow first storage area, and then reduce the volume and then add the page file or shadow storage on the disk area.
    • If enough bad clusters are found on the disk partition will not shrink.
    • You must be logged on to an administrator account in order to resize Windows Volumes in windows 7.

     

    Windows 7 Partitions or Volumes of shrinkage

    This section shows must shrink a Windows volume or partition. To do this, we must open the Windows 7 disk management tool. The following steps will guide you in this process.

    1. Click the button on the Start Menu in the bottom left of your desktop , and then click the Control Panel menu option.

    2. When Control Panel opens, click on system and Maintenance category.

    3. When opens in system and Maintenance category, scroll down and click on Administrative Tools.

    4. Double-click the computer management icon. The console of the computer management will now open. Down, you will see a category called storage and under this category will be the disk management icon, as shown below.

    5. Click on the disk management icon, and you will now be in the disk management utility as shown in the figure below. This utility you can see all the partitions on your computer and format, delete, create, develop or resize them. For this tutorial, I'm going to resize the partition E: of 16 GB so that when completed, there is a 8 GB partition and provides another 8 GB of free space I can use for other purposes.

    6. To shrink the partition, just click with the right button on the partition that you want to work with and select reduce . In this example, I click right on the E: partition and in the menu that appears, I select shrink.

    7. A screen similar to the one below appears. This screen indicates the size of the current partition you, how you can reduce it to a field where you can enter a specific amount to reduce, and then how big partition will be once it shrinks. By windows 7 default enters the maximum amount that you can reduce the volume, but if you want to change this amount, do so by entering the amount in MB in the enter the amount of space to shrink in MB: field. When you are satisfied with how windows 7 will shrink the partition, click the minimize button.

    8. Once windows 7 is complete decreases the volume, you will be in the disk management screen, but now the partition size will be the size you requested as shown below.

    Now that you have reduced the size of your volume of Windows, you can close the computer management console.

    You have now finished reducing your score and you have the extra space available for use as required.

    Windows 7 Partitions or Volumes extension

    This section shows that you must extend a Windows volume. To do this, we must open the tool of disk management where we can resize our volumes. The following steps will guide you in this process.

    1. Click the button on the Start Menu in the bottom left of your desktop, and then click the Control Panel menu option.

    2. When Control Panel opens, click on system and Maintenance category.

    3. When opens in system and Maintenance category, scroll down and click on Administrative Tools.

    4. Double-click the computer management icon. The computer management console will now open. Down, you will see a category called storage and under this category will be the disk management icon, as shown below.

    5. Click on the disk management icon, and you will now be in the disk management utility as shown in the figure below. This utility you can see all the partitions on your computer and format, delete, create, develop or resize them. For this tutorial, I'll extend the E: partition so that it uses the rest of the available space on the disc 1.

       
    6. To extend the partition, he just click right-click on the partition that you want to work with, and then select the Extend option. In this example, I click right on the E: partition and in the menu that appears, select Extend.

    7. A wizard appears as shown below. Press the Next button to continue.

    8. A new screen, shown below, is displayed allowing you to select the free space available on your local hard disks that you can use to extend the space of the selected partition. It is important to note that Windows 7 allows you to extend a volume using free space on the same drive as well as the other disks. I strongly suggest that you do not extend a volume on a disk with free space of the other. It is because if one of the disks has a hardware failure, then all data on this volume will be removed. Rather just to use the free space on a drive that contains the volume you extend
      .

      As discussed in step 5, for this tutorial we are going to extend my 8 GB partition (drive E :) to the total size of disk 1 using all the available space. As disk 1 is only available free space on my computer, windows 7 automatically select as shown in the image above and use the maximum amount available to extend the partition. If there were other drives with free space that they have shown during the selection available . If you want to extend the volume to a lower amount you can change in the Select the amount of space in MB: field. In the contrary case, press us the button Next .

    9. You will be now be presented with a confirmation screen. If you are sure you want to extend the volume, press the Finish button. Otherwise, press the back button to make changes or the Cancel button to cancel this operation.

    10. Once Windows 7 completed to extend the volume, you will be on the screen disk management, where you can see the amount that you have extended with the new size. An example of this is shown below.

    At this point, you can close the Management window of the computer that your task is completed.

    Hope this information is useful.

    Let me know if it worked.

    Thank you, and in what concerns:

    Umesh P - Microsoft Support

    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

  • WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

    Hi, we get this error in an independent ADR on Grizzly implemented.

    August 14, 2014 09:59:05

    oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

    WARNING: The pool_config view or a table has not been found in the schema:

    APEX_LISTENER

    Oracle.dbtools.rt.web.WebErrorResponse 09:59:05 August 14, 2014

    internalError

    GRAVE: JDBCException [kind = NO_DATA]

    JDBCException [kind = NO_DATA]

    defaults.xml "XXXXX" designate removed for safety, front of post

    <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

    < ! DOCTYPE SYSTEM property "http://java.sun.com/dtd/properties.dtd" > ""

    Properties of <>

    < comment > saved on Mon Aug 04 16:25:09 EDT 2014 < / comment >

    < key "cache.caching entry" = > false < / entry >

    < key = "cache.directory entry" > / tmp/apex/cache < / entry >

    < key = "cache.duration entry" > days < / entry >

    < key = "enter cache.expiration" > 7 < / entry >

    < key = "enter cache.maxEntries" > 500 < / entry >

    < key = "enter cache.monitorInterval" 60 > < / entry >

    < key = "cache.procedureNameList" / entry >

    < key = "cache.type entry" > lru < / entry >

    < key = "db.hostname entry" > XXXXXXXXX < / entry >

    < key = "db.password entry" > XXXXXXXXXXX < / entry >

    < key = "db.port entry" > XXXX < / entry >

    < key "db.sid entry" = > XXXXXX < / entry >

    < key "debug.debugger entry" = > false < / entry >

    < key "debug.printDebugToScreen entry" = > false < / entry >

    < key "error.keepErrorMessages entry" = > true < / entry >

    < key = "enter error.maxEntries" > 50 < / entry >

    < enter key = "jdbc. DriverType"> thin < / entry >

    < enter key = "jdbc. InactivityTimeout"1800 > < / entry >

    < enter key = "jdbc. InitialLimit' > 3 < / entry >

    < enter key = "jdbc. MaxConnectionReuseCount"> 1000 < / entry >

    < enter key = "jdbc. MaxLimit' 10 > < / entry >

    < enter key = "jdbc. MaxStatementsLimit' 10 > < / entry >

    < enter key = "jdbc. MinLimit"> 1 < / entry >

    < key = "enter jdbc.statementTimeout" > 900 < / entry >

    < key "log.logging entry" = > false < / entry >

    < key = "enter log.maxEntries" > 50 < / entry >

    < key = "misc.compress" / entry >

    < key = "misc.defaultPage entry" > apex < / entry >

    < key "misc.enableOldFOP entry" = > true < / entry >

    < key "security.disableDefaultExclusionList entry" = > false < / entry >

    < key = "enter security.maxEntries" > 2000 < / entry >

    < / properties >

    Complete log

    August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

    INFO: NOTE:

    Stand-alone mode is designed for use in development and test environments. This not is not supported for use in production environments.

    August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

    INFO: Starting standalone Web container to: / u00/home/oracle/ords/ords

    August 14, 2014 11:28:14 oracle.dbtools.standalone.Deployer deploy

    INFO: Deploy the application = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml path

    August 14, 2014 11:28:17 oracle.dbtools.standalone.Deployer deploy

    INFO: Deploy the application path = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml

    August 14, 2014 11:28:18 oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder

    INFO: Using the configuration file: / u00/home/oracle/ords/ords

    Configuration properties for: apex

    cache. Caching = false

    cache. Directory = / tmp/apex/cache

    cache. Duration = Days

    cache.expiration = 7

    cache.maxEntries = 500

    cache.monitorInterval = 60

    cache.procedureNameList =

    cache.type = LRU

    DB. HostName = XXXXXXXXXXXXXXXXXXX

    DB. Password = *.

    DB.port = XXXXXXXXXXXXXXXXXXX

    DB.sid = XXXXXXXXXXXXXXXXXXX

    Debug.Debugger = false

    debug.printDebugToScreen = false

    error.keepErrorMessages = true

    error.maxEntries = 50

    JDBC. DriverType = thin

    JDBC. InactivityTimeout = 1800

    JDBC. InitialLimit = 3

    JDBC. MaxConnectionReuseCount = 1000

    JDBC. MaxLimit = 10

    JDBC. MaxStatementsLimit = 10

    JDBC. MinLimit = 1

    jdbc.statementTimeout = 900

    log. Logging = false

    log.maxEntries = 50

    Misc.Compress =

    misc.defaultPage = apex

    misc.enableOldFOP = true

    security.disableDefaultExclusionList = false

    security.maxEntries = 2000

    DB. UserName = APEX_PUBLIC_USER

    August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

    ATTENTION: * jdbc. MaxLimit in the apex of configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

    August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

    ATTENTION: * jdbc. InitialLimit in the apex of configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

    Using the JDBC driver: Oracle JDBC driver version: 11.2.0.3.0

    August 14, 2014 11:28:28 oracle.dbtools.rt.web.SCListener contextInitialized

    INFO: Oracle REMAINS initialized data Services

    Version of REST Data Services Oracle: 2.0.8.163.10.40

    The Oracle Data Services REST server info: Grizzly/1.9.49

    August 14, 2014 11:28:28 com.sun.grizzly.Controller logVersion

    INFO: GRIZZLY0001: from Grizzly Framework 1.9.49 - 14/08/14 11:28

    August 14, 2014 11:28:28 oracle.dbtools.standalone.Standalone run

    INFO: http://localhost: 8080/ADR / began to.

    Configuration properties for: apex_al

    cache. Caching = false

    cache. Directory = / tmp/apex/cache

    cache. Duration = Days

    cache.expiration = 7

    cache.maxEntries = 500

    cache.monitorInterval = 60

    cache.procedureNameList =

    cache.type = LRU

    DB. HostName = XXXXXXXXXXXXXXXXXXX

    DB. Password = *.

    DB.port = XXXXXXXXXXXXXXXXXXX

    DB.sid = BXXXXXXXXXXXXXXXXXXX

    Debug.Debugger = false

    debug.printDebugToScreen = false

    error.keepErrorMessages = true

    error.maxEntries = 50

    JDBC. DriverType = thin

    JDBC. InactivityTimeout = 1800

    JDBC. InitialLimit = 3

    JDBC. MaxConnectionReuseCount = 1000

    JDBC. MaxLimit = 10

    JDBC. MaxStatementsLimit = 10

    JDBC. MinLimit = 1

    jdbc.statementTimeout = 900

    log. Logging = false

    log.maxEntries = 50

    Misc.Compress =

    misc.defaultPage = apex

    misc.enableOldFOP = true

    security.disableDefaultExclusionList = false

    security.maxEntries = 2000

    DB. UserName = APEX_LISTENER

    August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

    ATTENTION: * jdbc. MaxLimit in apex_al configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

    August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

    ATTENTION: * jdbc. InitialLimit in apex_al configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

    August 14, 2014 11:32:03 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

    WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

    August 14, 2014 11:40:49 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

    WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

    August 14, 2014 11:40:50 oracle.dbtools.rt.web.WebErrorResponse internalError

    GRAVE: JDBCException [kind = NO_DATA]

    JDBCException [kind = NO_DATA]

    at oracle.dbtools.common.jdbc.JDBCException.wrap(JDBCException.java:88)

    at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:63)

    at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:38)

    at oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher.tenant(JDBCTenantDispatcher.java:98)

    at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:71)

    at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:37)

    at oracle.dbtools.rt.web.ReTargetingDispatcher.canDispatch(ReTargetingDispatcher.java:45)

    at oracle.dbtools.rt.web.RequestDispatchers.choose(RequestDispatchers.java:160)

    at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:75)

    at oracle.dbtools.rt.web.ETags.checkPrecondition(ETags.java:93)

    at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:426)

    at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:164)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

    to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.doFilter (ServletAdapter.java:1059)

    to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.invokeFilterChain (ServletAdapter.java:999)

    at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)

    at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:91)

    at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)

    at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)

    at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)

    at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)

    at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)

    at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)

    at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)

    at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)

    at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)

    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)

    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)

    at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)

    at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)

    at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)

    at com.sun.grizzly.ContextTask.run(ContextTask.java:71)

    to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:532)

    to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:513)

    at java.lang.Thread.run(Thread.java:662)

    Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist

    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)

    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)

    at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)

    at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)

    at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)

    at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)

    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:208)

    at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:886)

    at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1175)

    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1288)

    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)

    at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3656)

    at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1495)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:111)

    to com.sun.proxy. $Proxy44.executeQuery (unknown Source)

    at oracle.dbtools.common.jdbc.JDBCQueryImpl.resultSet(JDBCQueryImpl.java:92)

    to oracle.dbtools.common.jdbc.JDBCResultRowIterator. < init > (JDBCResultRowIterator.java:29)

    at oracle.dbtools.common.jdbc.JDBCQueryImpl.execute(JDBCQueryImpl.java:52)

    at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:60)

    ... more than 33

    DBA has forgotten to run apex_rest_config.sql Doh!

  • Wacom Cintiq 13HD - "a supported Tablet not found on the system."

    You just bought a 13HD Cintiq (no touching) and installed the drivers Wacom on my Macbook Air w / OS X 10.11.4. It works as a second screen, but I can't get the pen to do anything and when I look in the preferences system under the Wacom component I see nothing except a message stating "a supported tablet was not found on the system." I have installed the latest driver and two former previous drivers and restarted several times now. Any help?

    That's what I see in the system Pref Pane:

    Have you checked the forum Wacom for possible solutions?

  • "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 1

    I got the error message 'the expected version of the product was not found on the system' when I was installing Microsoft Office Professional 2003 Enterprise Edition (Microsoft Office Outlook 2003 with updated business contact to update Manager) Service Pack 1. I wonder that someone has a solution to resolve this error message. Your help is greatly appreciated.

    Jim

    You cannot install Office 2003 Service Pack 1 when overview of InfoPath 2003 Service Pack 1 is installed

    If which are not related to the situation, suggest it ask you for help by the experts of the Officeinstallation, modernization, and activating Microsoft Office products Forum.

    MowGreen Services update - consumer safety

  • Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

    Original title: Plustek OpticBook 3600 is not installed

    Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

    PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

    Hello
    You can try the troubleshooting provided in the link below steps to fix the problem.

    You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

    http://support.Microsoft.com/kb/841567

    Note:

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756

    See also:

    Error message: cannot install hardware. An error occurred during the Installation of the device

    http://support.Microsoft.com/kb/810882

Maybe you are looking for

  • Resistance of shunt on 6233

    I want to measure low current and build a waveform to display on a scope. I use a 6233 and you have selected a 0.05 Ohm shunt resistor that would produce the voltage drop for the expected current and provide little disturbed in my original circuit. D

  • How can I send .ps file to the network printer

    I am trying to send the test.ps file to the network through the command copy PCOUNT_L6B-LH5 test.ps back Postscript printer PCOUNT_L6B-LH5-PES is the printer port. but the file cannot reach the printer. Please someone help me.

  • What is a X10Net?

    WTAT is a X10Net

  • OfficeJet 6600: upgrade of Windows post 10

    After upgrade Windows 10 on 29/07/2015, my 6600 Officejet continues to work and print. but when I click on my desktop icon to view ink levels or that scan a page comes up saying install new printer. In the control panel Officejet 6600 is indicated as

  • key to the disabled system 94993060

    How can I fix compaq 2000 presario CQ62 system off key 94993060