OSX 10.11.3 can't VPN via AnyConnect 3.1.14018 iPhone6 ASA 5550 Verizon hotspot

Similar Questions

• Can't VPN via WRT54G

  Hi all

  Until last night, I used an old Linux box to route to the web behind NAT.   But last night I got replacedthat with a WRT54G, 8.00.2 firmware revision.  Everything works fine, except one thing.

  I use a PPTP VPN connection simply return to my place of work.  Last night, I tried my laptop and it doesn't have both wired and wireless.  But I peut ping at the address I am trying to connect to...

  So I think it's just some settings on the router, Miss me him and I didn't play with it until I got a few tips from the experts here on the forum.

  Thoughts?  Thank you!

  Chris

  The WRT54G supports PPTP transmission.  Check the Security tab of the web interface of routers.

• slow when they are connected via anyconnect VPN, ASA OS 9.0

  Hi guys

  My users are complaining that they are experience slowness when they are connected via vpn anyconnect for ASA os 9.x, 5 Mb files tikes 15 mts rough with them, even if these users also have a connection broadband on their place

  any guy insight

  Thank you

  Hi Ibrahim.

  My first suggestion to you is to follow the recommendations of Cisco, associated with latency problems.

  hostname (config) #-group attributes policy
  hostname (config-Group-Policy) #webvpn
  hostname (config-group-webvpn) select #svc dtls
  hostname (config-group-webvpn) #svc df-bit-ignore enable
  hostname (config-group-webvpn) #svc routing-filtering-ignore enable
  hostname (config-group-webvpn) mtu #svc 1200
  hostname (config-group-webvpn) #svc compression no

  (a more recent version, you can use the command "anyconnect" instead of "svc")

  If after this the problem persists please let me know when is the right time to reproduce the problem and collect the balls, debugs and catches. I also need the current configuration of the SAA (see technology in a txt file)

  Kind regards

  Aditya

  Please evaluate the useful messages.

• VPN via ethernet

  Hello

  I'm reposting this thread, sorry for that.

  Is it possible to operate the access remote vpn for users at the metro ethernet, as users connect to headquarters using vpn for remote access via metro ethernet link.

  This metro ethernet link connects headquarters to the branch.

  We want to test the scenario for remote access users.

  -Main office hosts the servers behind firewall ASA 5585

  -another branch is located in the same city for a short distance, but connected via metro ethernet link to Headquarters (no internet link in the branch)

  -The users of the branch needs to connect to the main office servers located behind a firewall

  -The value of the subsidiary security considerations mean that the branch users use a vpn client to authenticate to servers & not directly access servers

  Is that we can configure vpn remote access to the Head Office of the ASA, knowing that there is no internet connection in-branch & branch users will use metro ethernet between the two offices link to connect to the vpn?

  Appreciate any help. Thanks in advance

  Hello

  I don't know why it wouldn't.

  As long as users can connect to the IP address of the interface of the ASA HQ (through which lies the site of the direction of), then you should be able to configure IPsec VPN for this interface and enable them to use VPN to connect to certain parts of your internal network.

  I guess the agency network is currently using the Internet connection via the HQ site and traffic to any internal network HQ is still blocked. Or maybe authorized but will be amended to require the VPN to access.

  -Jouni

• VPN via a natted router

  Hello

  I think that vpn via nat is 'enabled' in the 6.3.1 software for the pix? I have problems to run. Can someone give me directions, including everything I need to know about the router?

  I guess that everything that I have to do is create a static nat from 1 to 1 of the legal IP outside the pix outside IP router? Then configure the vpn as usual to accept vpn as usual (I use the 4.0.1 cisco client).

  I'd appreciate any help.

  Thanks for your time

  Andy

  I think that you need to configure the NAT-Traversal, the command to do this is isakmp nat-traversal]

  NAT - T can be enabled or disabled:

  By default? OFF for site to site tunnels

  By default? We'RE for hardware and software VPN clients

• Our ASA 5510 can provide VPN to our LAN cloud?

  Hi people,

  We have a number of (1 7 or if virtual, dedicated) servers hosted in a cloud provider well known on the West coast of the USA.

  They just put an ASA5510 across our LAN Server to help protect the servers.

  I was wondering if it is possible that the ASA5510 can provide VPN access to our LAN cloud? At the moment we have the firewall block - all - ports except 80/443/3389 (RDP for our Windows servers).

  I was actually hoping to block port 3389, so nobody can RDP on all servers. BUT... VPN in our LAN cloud, then we can connect to a server via RDP or any software / port. Indeed, the VPN opens all ports... you have created a VPN tunnel has provided

  So is this possible? The ASA5510 this offer?

  Last question-> and it's a ballast: gulp:...

  We cannot install any client software 3rd party... including any cisco vpn client software. We must use the built in software Windows7 VPN... making PPTP, SSTP, L2TP-IPSEC.

  So... now the ASA5510 can offer that? If so... is there any special scripts or configs I need to give to the Cloud hosting provider, so they can set the machine to work?

  Help, please!

  -Jussy-

  Two possibilities come to mind.

  -Built-in L2tp over Ipsec client.

  ASA config Guide:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/l2tp_ips.html

  -Clientless webvpn (if RDP and other plugins, but requires java/activeX for some features...

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/WebVPN.html

  These options should work except ASA is in mode multi-conext.

  M.

• My new airport does not detect my existing WiFi network, I can connect only via the LAN.

  Bought a new airport 1 TB TimeCapsule and I wanted to add to my existing via a WLAN network. It does not detect it and I can connect only via the LAN. What I am doing wrong?

  Unfortunately, unable to connect to a 3rd time Capsule part wireless using a Wi - Fi.

  You need to connect to the time Capsule to your existing modem/router using a wired Ethernet cable connection, permanent... like the Time Capsule Setup Guide illustrates.

  

  If you really don't want the time Capsule to connect using the wireless... she can do... If it gets a signal to another Apple wireless router. So if you were ready to add another Apple... as an AirPort Extreme router... and connect it to your existing Ethernet cable router/modem and configure AirPort Extreme to broadcast a wireless signal... .then.. .the Time Capsule would be able to connect in this way, assuming that he is where he can receive a good quality of AirPort Extreme wireless signal.

• I have an iPhone and a MacBook Air 11 '' 6. iPhone 6 syncs and backup icloud. I can access iCloud via the net on MacBook.  The problem is that I can't get the MacBook to sync with iCloud.  How can I do this?  Help, please. Thank you.

  I have an iPhone and a MacBook Air 11 '' 6. iPhone 6 syncs and backup icloud. I can access iCloud via the net on MacBook.  The problem is, I can't get the MacBook to sync with iCloud.  How can I do this?  Help, please. Thank you.

  What, in particular, looking to sync with the Mac iCloud? If you mean things like Contacts, calendars, Notes, etc., then you want to go in under the  system preferences, click the iCloud and connect to iCloud there with your iCloud ID. Then select which items you want to sync'd via iCloud.

  What - what are you trying to do?

  See you soon,.

  GB

• Service Manager Console 2012 can create tickets via email through any kind of process/workflow?

  Original title: create tickets by e-mail

  Hey guys,.

  I need to create a support metric and most of our users are used for sending emails to the support mailbox and do not connect a ticket. Service Manager Console 2012 can create tickets via email through any kind of process/workflow? I know another system that can - I did not know if the MSC can?
  I hope that makes sense.  THX,

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• I can´t connect via WIFI.

  I can´t connect via WIFI. My equipment is a Realtek RTL8191SE WLAN 802.11n, is recognized by the computer as work, and the version of the driver is the last update, I found on the web (version 2015.1.427.2010, dated 2010.04.27. What should I do?

  Hi Jeremiah c,.

  ·         What happens when trying to connect via wifi?

  ·         You receive an error message/code?

  ·         Have you made changes on the computer before this problem?

  ·         What version of the operating system is installed on the computer?

  Follow these methods.

  Method 1: Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:  Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 3: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4: Follow the steps in the articles provided.

  In the Windows wireless network connection problems

  Wireless network card: frequently asked questions

  Also update the latest drivers for the network card.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Reference: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows?T1=tab04

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

• Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix? __

  Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix?

  In the Task Manager, click on "File" and select "new task (run).

  Type explorer.exe, and then press the ENTER key.

  If you are able to connect successfully to the windows, scan the entire computer using updated anti-virus software and check the virus.

• Can a VPN 3005 cause multiple IP addresses on the external interface?

  Nice day

  Can a VPN 3005 cause several IPS on an external interface?

  I expect to use it in an environment that has 2 ADSL connections to an internet service provider. For the sake of the exercise, we could call them ROUTER1 and ROUTER2.

  We have a few VPN we always want to spend by ROUTER1 and some VPN we always want going through ROUTER2.

  Is this possible?

  Thank you very much

  No, not possible, sorry.

• Can not see the road when connected via AnyConnect

  We have just added a new subnet to our network. The vlan is to the top and to the top and we have network connectivity to the servers a few we just added to this vlan. When a user connects to the network via anyconnect VPN, the new subnet does not appear in the Windows routing table and therefore is routed out of the default route, and disappears in the clouds of the ISP. All other existing subnets show in the routing table. Any thoughts?

  New subnet - 10.40.10.0/24

  IPv4 routing table
  ===========================================================================
  Active routes:
  Network Destination gateway metric Interface subnet mask
  0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.26 25
  10.10.0.0 255.255.0.0 192.168.15.1 liaison 2
  10.10.255.255 255.255.255.255 on binding 192.168.15.1 257
  10.11.0.0 255.255.0.0 192.168.15.1 liaison 2
  10.11.255.255 255.255.255.255 on binding 192.168.15.1 257
  10.15.0.0 255.255.0.0 192.168.15.1 liaison 2
  10.15.255.255 255.255.255.255 on binding 192.168.15.1 257
  10.20.0.0 255.255.0.0 192.168.15.1 liaison 2
  10.20.255.255 255.255.255.255 on binding 192.168.15.1 257
  10.30.0.0 255.255.0.0 192.168.15.1 liaison 2
  10.30.255.255 255.255.255.255 on binding 192.168.15.1 257
  10.101.0.0 255.255.0.0 192.168.15.1 liaison 2
  10.101.255.255 255.255.255.255 on binding 192.168.15.1 257
  38.100.196.194 255.255.255.255 192.168.1.254 192.168.1.26 26
  127.0.0.0 255.0.0.0 127.0.0.1 on route 306
  127.0.0.1 255.255.255.255 127.0.0.1 on route 306
  127.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  172.17.0.0 255.255.0.0 192.168.15.1 liaison 2
  172.17.255.255 255.255.255.255 on binding 192.168.15.1 257
  192.168.1.0 255.255.255.0 on 192.168.1.26 route 281
  192.168.1.26 255.255.255.255 on 192.168.1.26 route 281
  192.168.1.254 255.255.255.255 on 192.168.1.26 route 26
  192.168.1.255 255.255.255.255 on 192.168.1.26 route 281
  192.168.15.0 255.255.255.0 on binding 192.168.15.1 257
  192.168.15.1 255.255.255.255 on binding 192.168.15.1 257
  192.168.15.255 255.255.255.255 on binding 192.168.15.1 257
  224.0.0.0 240.0.0.0 on-link 127.0.0.1 306
  224.0.0.0 240.0.0.0 on 192.168.1.26 route 281
  224.0.0.0 240.0.0.0 on binding 192.168.15.1 257
  255.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  255.255.255.255 255.255.255.255 on 192.168.1.26 route 281
  255.255.255.255 255.255.255.255 on binding 192.168.15.1 257
  ===========================================================================
  Persistent routes:
  None

  IPv6 routing table
  ===========================================================================
  Active routes:
  If metric network Destination Gateway
  16 58: / 0 sur-lien
  ===========================================================================

  Hello

  This new subnet that has been added to the configuration, also added to the AnyConnect split tunneling configuration?

  It won't show himself on the AnyConnect client unless the part of the split tunneling list to reach through the tunnel.

  Federico.

• Customers SIP third can save CUCM via Highway and road Express-Core

  Hi all

  We are the kind of partner with Cisco in China. Our SIP in the Intranet clients can register to CUCM and make calls to the other. Now, we intend to let our customers SIP Internet CUCM registry. As far as we know, Cisco edge expressway and highway-core are required for Cisco devices is registered to the CUCM. However, we wonder if the third-party SIP clients in the Internet can join CUCM via Highway-core and Highway? After Google search, could not find a clear answer to this question. Any feedback is greatly appreciated.

  Best regards

  Chen-Che

  MRA does NOT with any 3rd party (SIP or H.323) device, endpoints only Cisco working with ARM.

  Deepak is just saying that internally, you can register as a VCS - C (and the trunk then to CUCM), and in fact, if they are SIP, x8.8 also allows recording on EXP - C, once again, internally NOT on ARM.

  You say you already save those of CUCM internally, there is even no need registration VCS - C.

• Hello, I am trying to cancel my subscription through the website of adobe, but I fight. I can't contact via online chat. How can I make you cancel your subscription?

  Hello, I am trying to cancel my subscription through the website of adobe, but I fight. I can't contact via online chat. How can I make you cancel your subscription?

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday