OSX Maverics problem configure Deskjet 3055 A

Similar Questions

• problem with Wi - Fi of the HP Deskjet 3055 A J611-n

  Hello

  I'm a newbie in the forum. I have to solve a problem, I had this morning with my new printer HP Deskjet 3055 A J611-n.

  First of all, I would like to know the reason why I found the 3050 a J611a installation CD in the box, I hope that's not a mistake, and drivers are the same that I have to use to install the machine.

  Then, I have a problem with the wireless connection. When I tried to connect my printer to the router, my printer found the link and all of a sudden he throws on all laptop computers connected to the same network. He brought to the installation to fail, because the printer found the router, but it also could not complete the installation correctly because the cell phone has been disconnected.

  Can someone help me solve the problem, please?

  Thank you in advance.

  I fixed the problem by unplugging all laptops and leaving in line just one where I wanted to install the printer on. It worked fine (I used your suggestions).

  Thank you for helping me.

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• HP Deskjet 3055 has all-in-one installation with mac

  just bought the perfect printer for my HP Deskjet 3055 A scanner/printer/photocpier needs and I precisely wanted to that it is wireless. to see that it won't install with MAC OS X 10.7.5... When I insert the instalation disc the message is "operating system is" the installer is not compatible with the version of the operating system on your computer. It is only compatible with 10.6 and below.

  is it possible for me to get this to work without having to plug?

  Hello

  Constitutes plug in the USB cable, it is necessary to configure the wireless connection.

  Then, download and install the software for your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107372-1&CC=UK&DLC=en&LC=en&OS=219&product=5224271&sw_lang=

  During the install you will be guided to configure the wireless connection, once the client software installation compelte it will inspire you to unplug the USB cable.

  Kind regards

  Shlomi

• HP Deskjet 3055 has. Unable to see the balance of the ink in the cartridges

  I have HP Deskjet 3055 has (3050 all-in-One series of J611). So far, when I clicked on the HP icon on my desktop I have learned how much ink is left in my cartridges. Now I can't learn this - all I can learn from the icon is the current position of any current print job. Also, I used to be able to order the new printing caridges via my HP icon - I think that it is now not possible. What is the answer. I had thought to unplug the printer and then reinsert new with the original CD. This seems a radical step but is it the solution?

  Hello pm1810,

  Welcome to the HP Forums!

  I understand that you are unable to see the ink levels using the HP icon on your desktop. I will do my best to help you! What is your operating system on your computer? Click here to read: Windows.

  When you click on the HP icon on your desktop, is it called the wizard of the printer? How is the printer connected? USB or wireless?

  If you are referring to the Printer Wizard and you are unable to access to the 'estimated ink levels' and a 'supplies shop online', then I recommend you to uninstall the software:

  Please follow this HP document uninstalling the software of the printer. (If this printer is connected by a USB cable, then disconnect the power cord from your computer.) Be sure to choose your appropriate operating system. Then, please clean the Temp folder on your computer. I'll give you a document here to help you.

  Now, install the full features on the site of HP software here. Choose your appropriate operating system. If you are still having the same problem, could you please send a page on this post.

  Impatience on your part have a beautiful day!

• I lost the cd for my printer HP Deskjet 3055 A wireless, how do I use / install on my laptop?

  The cd of my printer HP Deskjet 3055 disappeared, and I don't know what to do because I am desperate to use my printer right now and I don't know if there is a way in line or help to operate my camera without the cd. This printer does not have a USB option.

  The first computer on which is installed the printer no longer works, and no one can install the printer on another computer, such as the cd is lost. What do I do? Help!

  You can download the content/software CD of her:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & LC = in & Product = 5224271

• Deskjet3055A HP: Deskjet 3055 has windows 10

  I think of the 8 to 10 Windows windows upgrade.

  There is no driver Win 10 for my Deskjet 3055 on the HP site. My driver Windows 8 will work OK if I update?

  Thanks for any help.

  Thank you very much Sunshyn, you put my mind at rest. I am grateful.

• HP Deskjet 3055 A photo quality print wet and stained.

  HP Deskjet 3055 has produced BON11B

  Unable to print photo-quality images dryly

  All inks run and smudge.

  Hi solcolumb,

  Thanks for the reply!

  It could be the combination of paper ink, good fishing according to my research, I would recommend the HP Advanced Photo Paper, as it appears to be available in the United Kingdom.

  Once you have had a chance to change the photo paper, please let me know if there is a difference in the photos!

• Pilot 'currently is not available from the software update server' on Mac OSX 10.8 for Deskjet 3054

  I'm very computer savvy, but cannot get this printer is installed!  I get "driver"currently unavailable from the updateserver software "on Mac OSX 10.8 for Deskjet F3054".  Help, please?

  Hello

  Restart your Mac, then run the update of software and try to add the printer again.

  If it persists, what is the exact printer - Deskjet 3054 or Deskjet 3054 A model?

  http://support.HP.com/us-en/document/c03770424

• DeskJet 3055 loses the WiFi connection

  My deskjet 3055 A put in place perfectly, and I was able to print via the [zv6252EA Pavillion] laptop using windows XPvia my iPad 4 and on my phone using the HP application.  However, by turning off and return the next day it would not connect.

  I Redid the installation process and yet once again, it worked perfectly, but today, after the back passage, it fails to connect to the internet.

  Say wireless network Test results "parameters ~ ~ no filtering ~ ~ FAIL" and the given solution is to "..." Add the MAC address of your printer in the list of devices allowed for your wireless router before continuing.

  My router is a THOMSON ST585v6, but I have absolutely no idea how to add MAC address and do not understand why he connects and works when I go through the procedures but don't reconnect the next day?

  HELP, please!   [But please speak in layman's language, I am a granny 68 years, not one bit of computing!]

  Hi Granny-M.

  I recommend that you uninstall your software, download the full features of hp.com software and reinstall.  I have provided a link which will guide you through the process.

  Click here

  Let me know how it goes.

  Good luck!

• HP Deskjet 3055 has the Macbook Air without wifi connection

  To make the HP Deskjet 3055 has for my son for the University.  They use an Ethernet connection over wifi and so it would probably be to connect your Mac to the printer using the USB cable instead. What sounds right and I have reason to think that cable he would need is included in the box of the printer?

  Hello

  That is right.  The printer does support wireless or USB and not wired Ethernet.  The cable comes in the box.

• I upgraded my iMac OSX Maverics, CS5 will work?

  I upgraded my iMac OSX Maverics, CS5 will work?

  Hi Alison1959

  Please see the link for Cs5 Tech Specs below: http://www.adobe.com/store/en_us/popup/software/creativesuite/mastercollection5/systemreqs .html

  CS5 has not been tested with OSX Maverics, but you can always give it a try.

  Try to install it and I hope it will work.

• HP Deskjet 3055 A, Scan Mac problem

  I have this printer last year, and it worked perfectly with my PC at the time, now I have a Mac and the printer works fine... but the Scan does not recognize the computer. Can you help me to find a possible solution? Thanks in advance!

  Hello

  Thanks for your OS Info!

  I checked this for you and found that it is not a complete driver and software available for this type of model of the printer with the Mavericks. However, there are a few options of workaround for you!

  Click on the link, select 'How to scan with the Apple Software Update driver?' and you will see the options to scan without the printer software:

  V10.9 OS X Mavericks: installing and using the printer on a Mac

   

  I hope this helps to clarify your concern for scanning!
  

  Have a nice day
  

• DeskJet 3055 has J11n: connect Deskjet 3055a J11n wireless network without PIN or WPSA and with Mac Mavericks

  Hello

  I run a Mac with Yosemite and would like to add the printer Hp Deskjet 3055a J11n for the wireless network.

  My router doesn't have any a WPSA button and not a PIN code.

  Before, when I used Mac OS 10.6, I could run the features of the CD that came with the Hp Printer.

  When I try to open the Setup from the CD on Yosemite, he says 'cannot open only on Mac 10.6.

  How can I connect the printer to my wireless network?

  Thank you!!

  Marjolein

  Hi @MarjoleinPeters,

  A driver full features for Yosemite is not available for your printer, or from the CD supplied with your printer from the HP website.  This document applies to the HP printers supported in versions of Mac OS X 10.7 (Lion), 10.8 (Mountain Lion), 10.6 (Snow Leopard), 10.9 (Mavericks), and 10.10 (Yosemite) who have only drivers available via Apple Software Update.

  I can help you put the printer on your network wireless software. I use this method for iPads, iPhones and other devices that have no software.

  1. Restore default network settings on the printer by pressing the wireless button, by going to settings and then restore the default settings. The wireless button should then start flashing, this means that it is now in auto wireless mode.
  2. To connect to the network that broadcasts the printer. It is usually HP-setup-3050 has and then a part of the MAC address. Always wireless light will blink on the printer at this stage, which is normal since it is not a real ad-hoc connection.
  3. Load up the built-in webserver (EWS) in the browser of your mobile device. For automatic wireless default IP address is 192.168.223.1.
  4. Go to the tab network along the top of the SAP.
  5. Click Setup Wizard along on the left hand side to begin to set up the printer wireless.

  

  You have now completed the configuration of wireless network, follow the next 3 steps to start printing.

  1. Blue wireless light will be solid, put the Mac on your network.
  2. Add the printer in system preferences.
  3. Print

  Please let me know if that solves the problem. I look forward to hear from you.

• Problems with DeskJet 460 (WiFi) and Windows 7 (x 64)

  I was able to configure my DeskJet 460 with my laptop running Windows 7 64 bit, but I encountered some problems:

  Of course, there is no Windows 7 HP Toolbox, so I went in the printer properties in hopes of using the printer services tab to align the print heads after installing new cartridges, but while the printer services tab is there, there is no button or anything at all.  So, how to align the print heads?

  The other issue has to do with the evolution of my printer WiFi card so that I can put its IP address manually.  Usually, I could do that through box HP Toolbox, but since my upgrade to Vista x 64, this isn't an option.  Is there another way to get around this?  I don't know, but I recall being able to use my browser and simply type the IP address of the printer as I can with my C7180 but it did not work, even if the Wireless Setup page gave me the IP address.

  I did a test print to a Microsoft Word 2007 document and then perfectly printed text, the URL listed in the document did not print.  For comparison, I printed the same document using the C7180, and there is no problem.

  And finally, the center of HP solutions don't list not the DeskJet 460, only the C7180; is there a reason for this?

  Any help/comments are appreciated!

  _______________________________________

  The PDADoc!

  I can answer one of your questions - why Solution Center does not DeskJet460?

  Because this DeskJet does not complete solution support, the 'hooks' solution for the 460 Center are not created.  HP develops special software for each printer have the Solution Center feature.