OSX web server does not

Similar Questions

• Web server does not start

  I get the following errors in the log file:

  default: 2 appwebStartThread starting named host: "LabVIEW".
  default: 1 appwebStartThread error: could not open a socket to 192.168.1.2, port 80
  default: 1 appwebStartThread error: HTTP cannot listen on 192.168.1.2:80
  default: 0 appwebStartThread could not start the server
  default: 3 appwebStartThread wire coming out appwebStartThread (10ac)

  the complete log file is attached. Does anyone have an idea?

  Thank you friends,.

  He is currently working. I used the command netstat /i and found netstat n which gave a list that contains among others:

  TCP 192.168.1.2:1528 74.125.79.103:80 CLOSE_WAIT
  TCP 192.168.1.2:1695 216.49.94.13:80 TIME_WAIT

  Whois for these ip addresses showed that Google and McAfee using port 80.

  I then started the Web server with port 3363, which is the default value for the VI Server Configuration. The web server log file showed now:

  default: 2 appwebStartThread for HTTP listening on *: 3363
  default: 3 appwebStartThread wire coming out appwebStartThread (16cc)
  and OK.

  BUT as C:\Program NIUninstaller Instruments\LabVIEW 8.6\ www\index.html says:

  If the Web of LabVIEW server does not use port TCP/IP 80, enter the following URL in the address field of Web browser (where port is the port number that uses the Web of LabVIEW server): http://localhost:port / examples.htm.

  Now the two example: creating a Web Service (Windows) of the help of LabView and the book.lvproj work address OR example finder.

  Thank you once again,

  OLE

• Problem loading of LabVIEW examples: "an error has occurred - system OR Web server does not work."

  On one of my computers, whenever I try to load any LabVIEW example, it does not load and I get this message. It works on other computers.

  How do I tell me what's not on the computers?

  OK I get it; the trick is to learn how to do a search of this forum with the right combination of magic words, and it may take a few tries. It seems the least better words. The words magical combination "OR Web Server system" showed me to go to the Panel > programs and repair LabVIEW; problem solved.

• My password for the integrated on my HP OfficeJet 8100 Web server does not work

  I entered my password, and kept the username by default (admin), but now I can't access the pages of EWS (locked).  How can I reset EWS (or the full printer) to the factory settings?

  Maybe my password is too long?  (20 characters)

  Thank you!

  Hello

  Please, make sure that you type the user as administrator when you type the password, then check to see if that can help you.

  If the same persists, reset the network settings, which will also reset the administrator password:

  

  If necessary, print a Network Setup page to find the IP address if it has changed, which can be done by pressing a second time the summary and the button wireless on the printer control panel.

  Kind regards

  Shlomi

• The DNS server does not respond when try connect a Web site

  original title: dns server problem

  m using computer dell laptop with windows xp.i usually to plug my my cell phone and use vodaphone since 2 days internet.since I m unable to access all sites Web on laptop.m get a msg105 error (dns server does not)... so I downloaded the public dns server on cell n transferred on laptop and changed my dns to google dns server server... It worked fine for one day and the next day I had the same problem of server dns - no responding.so I repeated al procedure again and then it started workin again... What is the problem with my dns server... do I have to download na dinstall public dns server every time I use my laptop via the cell phone internet. ?... Help, please...

  Thank you

  It should work with the server DNS of Vodaphone.  Set the laptop to get its IP & DNS addresses automatically, then make sure that the DHCP Client service is set to automatic startup.

  John

• A particular Web Site does not load

  A particular website does not load, and I was previously able to view this site about 2 weeks ago. It's a free WordPress site/blog.

  I keep getting the error message "The connection to the server was reset while the page was loading." I've tried deleting all cookies and emptying the cache with no success. I also tried a "DNS Flusher" with the same result.
  

  I followed all the recommendations on the link using Firefox and checked the FAQ and community sections with no luck.

  I can view the page in Safari. The owner of the website can view this website using a configuration similar to mine (Mac OS 10.5, Firefox 12.0).

  Nothing I know have changed since I was able to view this site 2 weeks ago for example, I'm not going through a proxy server, nor do I have any secondary security or anti-virus running.

  Any help would be appreciated.

  This Web site does not work with a Firefox 12 user agent.
  13 Firefox works, so it would be best to install Firefox 16 because it is the last version that works on your operating system.

  • http://download.CDN.Mozilla.NET/pub/mozilla.org/Firefox/releases/16.0.2/Mac/

  See also:

  • https://support.Mozilla.org/KB/Firefox-no-longer-works-Mac-OS-x-10-5

• Google and other Web sites does not work after installing Bitdefender Internet Security.

  After that installation of the version of Bitdefender Internet Security offered to the 60-second-anti-virus plugin for Firefox of Bitdefender, a number of sites have stopped working. First of all, I cannot change my homepage, because the connection hangs, and Web site does not open. In addition, tries to connect to a number of Web sites (Google, Youtube, Yahoo, DuckDuckGo, etc.) created this site:
  "Secure connection failed".

  An error occurred when connecting to www.google.com. The server has rejected the transfer protocol because the customer to a lower version of TLS on the server supports. (Error code: ssl_error_inappropriate_fallback_alert)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem."
  

  In short, a lot of great websites do not work and are seriously harming my ability to work. Bing works as a site search engine that I can go to, but not as a home page. I desperately need help with this problem...

  Hi pokator, can you try disabling ssl scanning in bitdefender options and see if that makes a difference?
  http://www.BitDefender.com/support/what-to-do-when-security-certificates-cannot-be-verified-installed-1090.html

• Web pages does not appear

  I opened firefox and it looked like he briefly updated before you start. Homepage of google news did not come to the top and the address bar was empty, as the screen. I'll type a variety of web addresses in the address bar, and it seems to accept, but the screen never changes to be a Virgin. When you click on bookmarks, the current web address does not change, and the page remains blank.

  I had just started using a service to hide my IP called Unlock-France. This required me to disable the Internet 6 and use a specific Protocol Internet 4 DNS server address. I had zero problems with firefox while doing this, but thought it might be relevant. I've reversed these changes, but it has not changed the status of firefox.

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• Server does not support remote façade panels

  Hello.  Hope someone has an idea about that.  After the computer host and update cDAQ 9139 LabView SP1 from 2013 to 2014 LabView dev suite shipped by NOR, I get the error "server does not support the remote panels" when you try to view my remote panel.  Before the update it worked normally.

  I went through everything in the list in this document, http://digital.ni.com/public.nsf/allkb/C23EF1551D8C52ED86256B140073EE2E and can't find anything that will solve the problem.

  I have rebuilt the application in 2014 of LabView (I even tried a new simple project with a single loop, one of the temperatures and a remote control), rebuilt the build spec and get the same error.

  "I've re-edited the web page and checked in the html code it refers"CODEBASE ="ftp://ftp.ni.com/support/labview/runtime/windows/2014/LVRTE2014min.exe" and I have, according to MAX, LabView DURATION 14.0.1 installed on the host machine.

  If something has changed related LabView 2014 which would cause a new firewall as this remote façade program worked great with 2013 installed?  I've already added that LabVIEW 2014 and all other related apps through the firewall, including the web server.  I am also on a machine that doesn't have a Bluecoat, our company network/internet security suite is installed.

  Thank you

  Michael

  Another possible solution to this problem - operator error.

  See one of my other posts here for details, but I made an assumption about the port numbers and what they apply to.  Two key points - the port of the web server application in the configuration of hardware web page is not the port used to access the remote panel - port is assigned in the properties of the device, the server settings remote control panel in the project.  And they cannot use the same port; This will also lead to the error "server does not support the remote panels.

  Note to the NOR - you must add this to your KB document on the resolution of this error.

  Thank you!

• My PC does not connect to the Internet, a window opens and says DNS server does not respond.

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  My PC does not connect to the internet, a window opens and says DNS server does not respond.

  Hello

  Follow the steps in the article mentioned below and check if it solves the problem:
  http://support.Microsoft.com/kb/314095

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Unable to connect to a network error: DNS server does not

  * Original title: unable to connect to the internet - yellow on network acess exclamation point

  other computers, my ipad and phone can all access the internet via the same wifi connection.

  even a direct lan connection did not help

  shows of troubleshooting DNS server does not

  Help, please

  concerning

  Turkish Lira

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, I understand that you can not connect to the network on your computer.

  I can understand how frustrating it can be when things do not work as expected.

  To better understand this issue, I would like to know the following information:

  1. What is the brand and model of the computer?

  2. did you of recent changes to the computer before this problem?

  3. you receive an error during the network connection code failed?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  We will try the following methods and check if it helps.

  Method 1: I suggest you clear the DNS cache and see if that fixes the problem. Clear the DNS cache forces DNS to query a DNS server rather than using the information stored in the cache.

  Follow these steps:

  a. click on the 'Start' button.

  b b.. in the search box, type "command prompt"

  c. in the list of results, click on invite and then click on run as administrator

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns

  Restart the computer and see if that fixes the problem.

  Method 2: If you still have questions, I suggest you refer to the suggestions of Meghmala responded on 28 June 2011 from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/DNS-server-not-responding-keeps-coming-up-and-i/58fc8366-B2B2-4A8D-9E30-56a155635631?rtAction=1422395012673

  You can also see the following article for more information:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Hope this information helps, please respond with the requested information and the status of the question to get help. We will be happy to help you.

  
  

• Windows live mail send error "the server does not support an SSL connection. Server error 250.

  Original title: Windows live mail error send

  Cannot send mail to Windows Live Mail.  Error message... The server does not support an SSL connection. Server error 250. Server - * address email is removed from the privacy *. Windows Live Mail error ID - 0x800CCC7D. SMTP Protocol.  Port 25.

  It's better, thank you. This message is not from the BT Server; It comes from your Avast antivirus which is intercepting your mail. You would be well advised to turn off the Avast Mail shield; It does not add any additional security if you don't by attention elsewhere, and can cause problems.

  I see that it is the record of mail in bulk that because of the problems in this case. Connect to the Web e-mail account and clear the items junk and deleted records.

  BT is recommended to use SSL, but your original question indicated that SSL was not taken in charge for SMTP on port 25. I think we'd better go on all your settings. Recommendations of BT are on this page: BT email: what are the settings for outgoing and incoming mail servers?, but they only work if you disable Avast scanning mail.

  Right-click on the account name in the folders pane, and then select Properties.

  • Under the servers tab, make sure that my server requires authentication is selected.
    Select connect with authentication in clear text.
  • On the Advanced tab, select this server requires a secure connection (SSL) for both servers.
    Make sure that the incoming (IMAP) port is 993 and port for outgoing (SMTP) is 465.

  When you've made all these changes, close Windows Live mail and wait five minutes for the program do its cleaning and save the modified settings. Then, restart the computer and make sure that the Mail of Avast shield is always off.

  Launch Windows Live Mail, then dial a new test message and send it to yourself. Post a new message in your response.

• Web proxy does not

  I recently have re installed Windows 7 and now cannot open all the web pages, but can successfully ping sites as well by the name and IP address. Diagnose connection problems the message returns ' your computer seems to be configured correctly, but the device or resource (web proxy) does not.

  Can someone please help?

  Hi BarryTL,

  Thanks for posting in the Microsoft community.

  I understand that you are unable to connect all web pages and you receive error Web Proxy not responding.

  Before you start the troubleshooting steps, I need the information required.

  1. you are on a domain network?

  2. what web browser do you use?

  3 did you changes to the computer?

  Method 1:

  If you use Internet explorer, I suggest you to see the links and check.

  What is a proxy server?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-proxy-server

  Change the proxy server settings in Internet Explorer

  http://Windows.Microsoft.com/en-us/Windows7/change-proxy-server-settings-in-Internet-Explorer

  See also:

  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

  See also:

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• Server does not

  I have three vCenter configuration of clusters in vSphere. How I set up access via web browser is to use the load balancers send the client request vsphere.domain.com to all connections the three vcenters. There is no priority on which real server gets the request of the customer. Persistence of IP source (stiffness) is set to 1 hour, and the load balancers are configured to redirect port 9443 80. This has worked well on our local network as well as outside our local network using a web browser. Now, we try to use the vSphere Android app Mobile Watchlist to access and manage vSphere. On our network if I use the IP addresses of real server bypassing my android application load balancing configuration works however, when you use the domain (vsphere.domain.com) FULL name I immediately get "server does not. What could the app asking or help I need take into account? Different port or Protocol? Thanks in advance for any information.

  This was resolved after finding that vSphere Watchlist Mobile app uses port 443 not 9443. A new access rule in the firewall and an another port forwarding on the load balancing virtual IP resolved "server does not.

• VMware VDM Web Access does not support your operating system (Windows7 beta)

  I got this message when connecting to the Server Desktop VDM:

  "The unmet requirements."

  VMware VDM Web Access does not support your operating system'

  my version: Office: Windows 7 beta with IE8

  I works perfectly with Vista Business SP1 (as host operating system) with IE7:

  VMWARE VDM Client version 2.1.0 build-596

  How can I solve this?

  Thank you.

  I'm not sure that there is a way to solve it.   The beta version is not in the operating systems supported on page 22 of the VDM 2.1 guide.

  http://www.VMware.com/PDF/vdm21_manual.PDF

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points